Similar Questions

• Support Wizard updates on the Pavilion dv6, Messages of Info w / English incorrect, etc. - is this Normal?

  I have a HP Pavilion dv6 notebook PC (product number: XZ082UA #ABA) running Windows 7 Home Premium 64-bit. I was installing the updates through the HP Support Assistant and a message appeared on the screen saying that it was "flashing" system and that the keyboard and the touchpad work not for the next minute or so, but the message box has some points of grammar that just made me a bit paranoid that it wasn't true... "The touchpad, keyboard would be no function during the flash process". My laptop has been really hard and as a windows command prompt were popping up then open Windows Installer. I don't know, I could just be acting paranoid for no reason, this is my first time installation updates through this program, so I don't know if this is normal... Just be careful because an error message containing a bad computer destroyed English of my brother... So I was wondering if it is normal that the update process.

  Hello Skunk,

  If the update takes place through the Support Assistant, you are fine.  "Flashing" is the correct term for this type of update.  It is always better to prevent than cure.

  Good luck!

• Install Windows Xp on the Pavilion dv7 - 1147ca, no audio drivers. How can I find them?

  Recently, I've killed my Pavilion dv7 - 1147 Vista ca for the edition of office Xp Pro. I could find the drivers for pretty much everything, but I can't work in my audio drivers. I looked around, but really can't find anything on my product, in terms of troubleshooting. I don't really know what that you guys need information, so ask and I can get it for you.

  Problem solved. for someone else who has the problem, as soon as you install the MS UAA, it allows to detect certain hardware. Instead of having it go online to find the drivers, tell it to search in a specific directory on your computer. Even if you have the window "select a directory" open, run the sp45044 driver. The installation program will fail, but it puts the driver on your computer. return to the window "select a directory" and have it searching for C:\SWSetup\SP45044\WDM\WinXP. It now allows to install your drivers and audio will start to work immediately!

  Thanks for the help of Paul

• HP pavilion a530n: restart hang

  Hello

  I have HP Pavilion a530n

  I've updated the bios

  motherboard ASUS K8N8X-(Diablo-UL6E)

  3.11 BIOS revision 31/08/04

  CORE 08.00.09

  The Athlon 64 processor brand

  Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600

  Connection to the local network

  It's a great machine, I feel some as a hardware malfunction and I came to HP looking to reduce at the source of the problem and get the right solution/replacement.

  In a first time considered to be a graphics card problem, I believe that it is the processor. Spikes in CPU usage (lag) for video media / scroll / animations/Games etc no matter what ranging from 80 to 120 MB and audio sync studder problems occurs.

  Graphics drivers from Nvidia has mitigated the problem by increasing the performance even more. But there has got to be hardware at fault. Then

  I decided to test the performance of the processor (on the clock) and I arrived for an update of the bios that would allow me to unlock the processor speed and diagnose the problem.

  "as had recommended", I missed the warnings and ran the installer. I did a backup.

  I ran restarting set up, hanged. Forced shutdown. initialized to a checksum error in the diagnostic screen (POST)

  connected to windows messenger windows could not connect to retry or cancel (two at the same time error messages), connection to the internet explore has been limited and some pages may not display, refreshing was necessary.

  It mainly that my office now has not run the warm boots. (it stays on, "hangs" before entering the MBR or by MAIL)

  Cold only work boots.

  It's the factory version

  Provider of system BIOS: American megatrends Inc. 2.11 31/08/2004

  SMBIOS Version 2.3

  carried out the restoration of the system - created minutes before.

  I reinstalled the operating system. I could not install the drivers or connect to windows messenger. I found that most network services have been disabled. I have reactivated them and was able to install the drivers.

  I went into the settings BIOS and "permits" the diagnostic screen. Connected to windows and connected, restarted messenger and it worked! for about 3-4 warm boots.

  Problem was solved temporarily; no major changes, there is no software currently only SP3 and. Net4 I was able to get windows update to download Internet Explorer 8. rebooted and hung... I don't remember exactly what happened just before.

  I cleared the cmos jumpers

  I also found a few bios utilities and a legacy of ASUS K8N motherboard-specific versions. (FAQ describes most of my problems)

  but I'm still not able to retrieve the version 2.11 of the factory and/or flash their public services.

  I've disconnected all devices but still hangs on reboot.

  loaded by default F5 and saved out F10. services.msc services are activated and started

  I searched on the HP Pavilion a500 Fund data base for a bios which corresponded to the K8N8X - LA motherboard, found another which fixed a problem of logo outside of send/receive error reports.

  Nothing without major change

  I downloaded the map network, the hp chipset drivers.

  Control Panel > Power Options > UPS >

  theres a [!]

  "The UPS service is currently stopped."

  If this is the reason why my computer is unable to restart

  run the command

  cmd /k sc config UPS start = disabled

  run a command that says ' [SC] ChangeServiceConfig SUCCESS. "

  Still, he was arrested after reinstalling the operating system. This isn't a solution

  I found this bios chip.

  What is delivered factory bios version?

  Manufacturer

  ModelChipset

  BIOS ID

  Full BIOS ID

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0302-000001-00101111-110703-HAMMER-N8XLA300

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0311-000001-00101111-083104-HAMMER-N8XLA308

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0310-000001-00101111-060104-HAMMER-N8XLA308

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  63-0311-000001-00101111-083104-HAMMER-N8XLA308 AM61CA02

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0307-000001-00101111-031304-HAMMER-N8XLA309

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0303-000001-00101111-120303-HAMMER-N8XLA302

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0310-000001-00101111-060104-HAMMER-N8XLA308

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  63-0302-000001-00101111-110703-HAMMER-N8XLA300 AM61CA02

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  63-0307-000001-00101111-031304-HAMMER-N8XLA309 AM61CA02

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0303-000001-00101111-120303-HAMMER-N8XLA302

  Solved the problem of restart.

  You can email me at [email protected]if you need assistance.

  Articles related to the causes of the problems of reboot:

  Microsoft technical support

  «This article describes how to resolve an issue where your computer stops responding (hangs) when you restart to complete the installation of Microsoft Windows XP Service Pack 2 or Windows XP Tablet PC edition 2005.» This problem occurs on a limited number of systems that use a version of basic input/output system (BIOS) that does not support production for Intel Pentium 4 and Intel Celeron D processors based on Prescott C-0 walk. »

  SECURITY

  "Mebromi is a Trojan horse aimed at computers with AwardBIOS, Microsoft Windowsand antivirus software from two Chinese companies: Rising Antivirus and Jiangmin KV Antivirus." [26] [27] [28] Mebromi installs a rootkit that infects the master boot record. »

  Once you reinstall the operating system, it should start normally. When you install SP1, SP2 and SP3 configurations start to become disabled as you progress through the facilities. Mainly the SP2 that is embedded with .NET framework.

  as a result.  Disabled at kernel/BIOS level networks > where activation of services is only superficial and plastic. The machine will be fractal reboot:

  PEOPLE WITH DISABILITIES

  The alerteur...
  Album...
  The Human Interface device access...
  Messenger...
  Net.Tcp Port Sharing Service...
  Network DDE...
  Network DDE DSDM...
  Remote Access Auto Connection Manager...
  Routing and remote access...

  Manual

  Application layer...
  Man asks...
  ASP.NET...
  COM EVENT SYSTEM +...
  COM + SYSTEM APP...
  Distributed transaction...
  Extensible authenticator...
  Fast user switching...
  Telec...
  Key health and...
  HTTP SSL...
  IMAPI CD-BURNING...
  Indexing Service...
  Logical Disk Manager...
  Logical disk administrative management...
  Software MS shadow...
  Network connection...
  NetMeeting Remote Desktop...
  network access...
  network connections...
  network location...
  provision of a network...
  NT LM Security...
  Office source engine engine...
  Performance logs...
  Multimedia notebook...
  QoS RSV...
  Remote access...
  Remote Desktop...
  Remote procedure...
  Removable Stora...
  SOPHIE...
  Smart card...
  SSDP Discovery...
  Symmatec password...
  Telephony...
  Terminal Server sErvice...
  Uninterrupitble power supply...
  Universal plug-and - lpay...
  The shadow copy of volume...
  Windows image acquisition...
  Windows install...
  Font Windows presentation Foundation...
  Wireless Autoconfig...
  WMI Performance...

  Auto...

  Net.Tcp port sharing...
  automatic updates...
  Intelligent background...
  Computer browsers...
  Cryptographic service...
  DCOM server...
  DHCP client...
  The error report...
  Event log...
  Help and support...
  IPSEC Services...
  Microsoft .net framework...
  NOrton Antivirus Auto protect...
  NVIDIA Display driver...
  Plug-and-PLay...
  Pring spooler...
  Protected storage...
  Remote procedure call...
  Secondary logon...
  Security Accounts Manager...
  Security Center...
  Server...
  Shell hardware Detection...
  Symmatec event handler...
  Symantec Settings manager...
  System event nOtification...
  The system restore sErvice...
  Task Schedulred...
  TCP/IP...
  Themes...
  WebClient...
  Windows Audio...
  Windows Firewall...
  Windows Management Instrumentation...
  Windows time...
  Wireless Zero Configuration...
  Workstation...

  I say this with absolute certanty

  I never had any problems with the installation of SP3 and .NET 4 or all the problems on my computer of this magnitude.

• The Pavilion g6-2123us left hinge pulling the bezel!

  Hello. My daughter about 2-3 years-old HP Pavilion g6-2123us has a problem with the left hinge. The support is pulling loose from the lower left corner of the lcd screen and the cracking of the collar. Did some research, it seems similar to problems left hinge that has occurred with the HP DV 9000 and the Pavilion dv7-4070us series.

  While the unit was under warranty, we sent it in for repair of hinge, which was covered - so this is the second time in the life of the laptop a two-or-three-year-old who broke the hinges. Needless to say, I'm not impressed by the quality of this laptop case/hinges. (It works well otherwise!). Although the warranty has expired, I hope that customer service can make something low-cost or free given that this seems to be a serious design flaw. (I have some experience with electronic repair and I saw coins on ebay, etc., but I really hope HP can intervene at the plate!)

  Thank you! Anyone has the info / similar problems with this model?

  Hello kgallagher

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• Problem with the BIOS of the Pavilion dm4-3002sa bought in Belgium

  5 months ago I bought a Pavilion dm4-3002sa (English version) in Belgium, where I live (to have a QWERTY, AZERTY keyboard like most laptops sold in Belgium). I discover now that this particular model is not recognized on the Belgian support HP web site - I could only find it on the web pages of HP UK.

  A month ago I started having repeated problems (automatic stop & restart every 3-5 minutes), which indicates there is a serious problem with my BIOS. The test of memory fails.

  I contacted HP support Belgian and send the laptop for repair (they said that they will replace the current memory).

  HOWEVER, I have another question: If the problem is caused by an incompatibility possible download relative to the BIOS here in Belgium, while my HP laptop is clearly a UK version and not recognized as a model sold in Belgium?

  If so, this means I can continue to have the same problem even after service.

  Registration of the laptop as based in the United Kingdom would be a solution? (i.e. regardless of my address of residence...) So that the updates & downloads are fully compatible with this model?

  A big thank you to the one who can help me!

  The problem of restart is much more likely to be associated, in view of the results of the test of the memory of the memory. You should have asked to send remembrance to you, rather than send the laptop away. Memory modules can be customer replaced. It is quite easy to do.

  The only real difference between having a QWERTY keypad and a QWERTY keyboard is the way the operating system sees the way in which the keyboard as being mapped when you choose the keyboard layout.

  Your computer laptop dm4-3002sa is still a laptop HP Pavilion Beats Edition entertainment as well as the USA (United States (version.

• How to send to apple iphone for repair of the screen

  Hi, I bought an iphone over 6s (64 GB) two weeks ago, the screen has been hacked by accident.

  I looked up on the apple site the cost of repair in the citation is $ 249

  However, when will organize a repair via the apple website he's trying to make me pay more than $500 Ouch!

  I think it's because they want to send me authorized service center apple not themselves, someone has a solution to this question and a suggestion how I can get this repaired for $249.  IE, how to send to apple authorized reseller.

  I'm in Darwin in Australia

  With our thanks

  Suresh

  Hello

  Contact Apple support (mail service may be available) or make a Genius Bar reservation to repair screen.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • https://www.Apple.com/au/retail/Geniusbar/

• If I submit my machine for repair, if it takes a few days to be repaired is the authorized Assistance Center bound to give me a replacement phone?

  the authorized service center bound to give me a replacement phone if the repair is going to take some time (a few days).

  What are the conditions?

  Yes, if the iPhone in for repair under warranty.

  https://www.Apple.com/support/iPhone/repair/other/

  Bring for repair. Make an appointment in an Apple Store or one of our many authorized service centers. We will try to fix your iPhone during your visit. In more complex cases, it will send to Apple repair center. If we do, your iPhone will be ready for pickup within 3-5 business days. If your iPhone is under warranty, many of our sites can offer you a loan product during the repair of your iPhone.

  
  

  iPhone Service Center response - Apple Support

• Envy 15 360 t: double support for repairs controls bouncing

  my computer has sent to tepair the case. The case damage was ln the lower part of the 360 envy laptop (it was a month)

  the computer came with the screen out and have bright markings - this was the upgrade of dollar $ too btw 356 improved screen.

  I called 10 minites after as I opened the box when I realized the problem.  I have spenf a nour and the other half being transferred around, during which, I noticed the buttons stick inside of the case, a computer for months.  very angry and red, I said a bad word and said to be silent and transferred again.

  Finally the 9th person I talked to said it includes and went on the subjects with me, has accepted the machine must go back and fix it the right way without charge,

  whereas the first repair was $ 270, it seems logical to me.

  I woke up and realized that they took me $ 252 for this second repair.

  now they have a laptop I paid $ 1200 for and an additional $ 270$ + 252 to make repairs in the first month of possession of the machine.

  This machine more than my car cost me at this rate.   I can't afford to be a customer of hp.

  @tvernace

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  
  
  Thank you for visiting the Forum from HP Support.

• Sam 1400-103: how to find support to repair my laptop

  Hello

  Could someone tell me how to find support to repair my laptop S1400-103
  I need to change the motherboard first
  I'm in the Netherlands, and I don't know how to fix the process.
  If anyone has any information I will be happy

  Today, it does not start power
  I have test the hard drive to the other system, it's OK.
  You can send me e-mail at [email protected] too

  Greetings from sorts

  Post edited by: sos.computers

  Hello

  In this case, you must contact the ASP. Official website of Toshiba, you can find the right service partner who is responsible for your country.
  Please visit this link.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

  Good bye

• Inoperative"HP Support Assistant" on a HP Pavilion p7-1254 to help de-Windows 7 Home Premium 64-bit

  Product name: HP Pavilion p7-1254

  Operating system: Windows 7 Home Premium 64-bit

  Error message: HPSF.exe has encountered a serious problem and needs colse.  Click 'OK' to outomatically restart this application

  Changes to the system: NO

  When the error occurs?  Is this a feature repeated at startup or at another time?  Updates to the system recently (Windows Update or other updates from HP support)?

  The normal solution for most of the problems with HP Support Assistant is to uninstall the application from the control panel / uninstall a program.  Then download and install the latest version of HP Support Assistant from the HP Web site:

  HP Support Assistant

  Search the topic download HP Support Assistant and select laptops or desktop computers, according to the case.

• upgrade to support/drivers of material for Pavilion dv8000t with Win 7

  Just upgraded my 2005 HP Pavilion dv8000t for Win 7 32 bit home premium.  Only XP was initially available, and now HP support will not recognize anything whatsoever to allow driver downloads.  Anyone else run into this?  Ideas, suggestions?

  Thank you very much

  Darth

  Hi, Darth:

  Use does not install drivers for the devices that update of windows Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1832444#N614

  If you cannot connect to the internet, please post the hardware ID's for Ethernet controller and network controller.

  I will guide you how to find the hardware for the network controller ID, and if you want, you can post the hardware ID's for all the missing devices, and I'll see what I can find.

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN

  If your model has a bluetooth radio, Vista driver will not work, so here's another model W7 bluetooth driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• can not get the new hard drive to work in the Pavilion ze4805us laptop

  have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6

  At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports.  For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety.  Western Digital only provides downloads of software and support going back to Windows XP.  Windows Millennium Edition is not able to recognize the full capacity of the drive.  Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.

  It seems that this laptop is the same time that the books mentioned in this thread.  Response from JackShack gives the best explanation as to why he shows quite different in the BIOS.  It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS.  This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.

  I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed.  Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003.  The 2004 related BIOS earlier than probably took supported LBA.  What is the current version of BIOS?

  What is the exact message that you get when you try to install Windows Millennium Edition?

• The video to the Pavilion 15 DVD burning

  I have a new Paviion 15 and burn videos from the internet on a DVD.  I searched and sought guidance on how to do it without success.  My laptop has a DVDRW SATA CdROM device SU208FB.  I am running Windows 8.1.

  I was under the impression when I bought the computer I was able to burn DVDs. Can anyone help point me in the right direction?  So far, the HP support center was not useful.  I appreciate any advice you can give!

  Hello

  What is your 15 Pavilion? It should come with the CyberLink software that allows to burn CDs blank and DVD at least. Some models can also burn BD now please try

  b how Win key and then press Q

  b type Power2 on the search box and press anter,

  c select CyberLink Power2Go

  Kind regards.

• Pavilion 17 f010sv i3 4030u: offer for f010sv support assistant bad BIOS Hp pavilion computer laptop 17

  I am the owner of the laptop above. After formatting with windows 8.1 and installation wizard Hp support me support upgrade wizard councils report to bios version f42revA! ???. After the upgrade, I realize that the system got too long to stop and then I started to find what goes wrong. Finally, I believe that the bios is bad version and I want to restore using a USB and a HP PC Hardware Diagnostics UEFI partition using the firmware option. After several attempts to downgrade again to f07 version that works perfectly I am not able to do so and I get the message >!?. I tried also several other versions of decommissioning, but always got the same message. Please me advice what to do because the system does not normally behave since the bios upgrade to version f42a. Also please fix this dangerous bug for bios update to the incorrect version on the support assistant hp software.

  Best regards

  Dimitris Siaflas.

  After several attempts I managed to return to the f33 version which seems stable. But please someone to repair

  the bad Council with assistance from assistant hp offering a bad bios CPU.