The video to the Pavilion 15 DVD burning

Similar Questions

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• How to convert a video from iPhone to a DVD burner

  How to convert a video from iPhone to a DVD burner

  ?

  What, exactly, you try to do? What kind of computer do you have?

  ~ Lyssa

• upgrade to win7: how to get the Roxio CD/DVD burning software

  I could not find this software on lenovo support.

  I know it is OEM, but we should still be able to install it after a clean install of windows!

  Any idea?

  Hi hatbrox,

  Check the configuration directory of procedure [assuming that if it still exists after the upgrade] :-c:\swtools\apps\cbed\SilentSetup.cmd

  It is always a good idea to backup C:\SWTOOLS before installing any OS on your thinkpad in advance.

  It will be useful.

• Make sure you have the latest firmware for cd or dvd burner

  I can't burn videos on my cd or dvd burner. He say make sure you have the latest firmware for cd or dvd burner. What can I do?

  This forum is for Microsoft Security Essentials.

  Go to the website of the manufacturer of CD/DVD and get the firmware.

• LG supermulti dvd burner is not detected by the system.

  I wanted to install ATI RADEON HD 4350 and so I uninstalled the driver Intel (r) GMA. I installed the card on the motherboard and I have installed the driver provided by the manufacturer using their CD and I also did other necessary things. Everything worked perfectly. Then in the driver user interface, I saw two monitors. I selected one of them, without any judgement and turns off the computer. Later, when I put it on I saw there was not on my screen and indicator showed natural signal, which was red. So I uninstalled the card and connect the monitor to the onboard connector cable.

  Sometimes the HDD and LG supermulti dvd burner got detected (both or one of them) and sometimes they were not. When they were done detected the speed and performance of the machine was very poor. Monitor has also not getting detected in Device Manager.Then I managed to uninstall the video adapter driver and is also further things to slove the problem:

  Checking the SATA connections (my HDD is on the SATA1 and LG supermulti dvd burner is SATA 2), checking the other connections, Clearing RTC RAM etc, but nothing gave me a permanent solution.

  Then I did a BIOS update and I did an upgrade to Windows XP SP3, stay inside Windows and I also reinstalled driver Intel (r) GMA (new version).

  Now the problem is the drive is detected but supermulti LG dvd writer is not. But now the monitor is in my device manager and performance is good. Now what should I do to the system so that it could detect LG supermulti dvd burner?

  Two other points are:

  1. when I was using the video card my system was attacked by a Trojan horse, but now it's OK after running a full scan using KIS2011 and take necessary measures.

  2 is powered for the LG supermulti dvd burner because it is to open when I am pressing the button.

  System Specs:

  OS: Win XP SP3 x 32

  MB:Asus P5QPL-AM (it has integrated video card)

  The problem has been resolved by running a scan for hardware changes in Device Manager. I did it before but this time it worked.

• Help with CD/DVD burning software

  Original title: help a dummy?

  What is the most simple and free cd/dvd/burner (image) to use Dummies like me? ...:)

  Hello

  Visit the link below to learn more about the CD/DVD burner in Windows:

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Burn a DVD-video disc

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  You can also use your favorite search engine to search for the available CD/DVD burning software.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Install external DVD burner on NB200

  Hello
  It is a first post of time following the purchase of a NB200 using OS WinXP installed standard. With the NB200, I also bought a LG GP08LU10 "External Super Multi DVD Rewriter". When I plug the DVD climb in the NB200 it powers and the NB200 recognizes hardware such as a CD-ROM drive. However, it is disabled. The Assistant added of Harware WinXP running causes the message "this device is disabled (Code 22)".

  A check of the CD that came with the DVD reveals that there are no drivers on the CD only DVD burning and playback software.

  I plugged the DVD player on my laptop Lenovo that is also running Windows XP and unity "plugged and played" as you would expect.

  A search on the web based on product LG GP08 ID creates very little success with one or two it seems to describe similar symptoms, but not solutions. More talk about the installation of a driver, but I was not able to locate a driver on the LG site (or as I said, on the product CD).

  The DVD player comes with a 'standard' USB cable and a USB power cable. Each single cable and two cables with the NB200 plugged into the power supply and it still is not plug and play.

  Does anyone have any suggestions?

  Kind regards
  TESA

  Hello

  According to the Microsoft page, 22 error means that the device is either disabled or not started. Eventually he hasn t started in your case.

  There are several proposals for solution.
  One of them told you he must remove the Device Manager and reboot the laptop.
  After that new reboot of the operating system should recognize the DVD drive connected again.

  On the other hand, you could try to remove all USB hubs and controllers from the list of devices USB and should restart the laptop again.
  This help to refresh the USB drivers.

  I not quite sure if deleting upper and lower filters change anything but maybe what it s worth m to try.
  Start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the laptop and check the functionality of DVD USB drive s.

• Tecra 8200: Strange question if I try to install a DVD BURNER

  I have a Tecra 8200, Pentium III 750 mhz, 256 MB Ram, 60 GB hard drive.

  I buyed a new DVD player, especially a double layer RECORDER of DVD TOSHIBA SD-R6472 SLIMLINE 8 x DVD - RW for laptop in the CAR.

  I installed it on my totebook and this drive seems to be not recognized Windows XP (with service Pack 2).

  When I put on my laptop and start the boot Tecra 8200, the led of the DRIVE to continue but when starts to load windows xp this leads coming out and when the sistem of start of windows do not recognize ENGRAVER of DVD;

  Is there a method to recognize-DVD BURNER to windows, and I have to start looking for plug-and-play, after I have remove and replace the DVD burner.
  If I use this way to recognize the work of good DVD and Windows XP and everything works fine.

  The problem is that I do all this action to use this DVD burner.

  I try to install the other two-dvd burner but y at - it the same problem: windows don't recognize they must use my singolar procedure to use they; I try to update my bios to the latest version available and to update firmware of dvd writer but never.

  I ask a real help to those who can provide help for me.

  Thank you all!
  Grazie a tutti! :)

  CIAO

  Italy Dario

  Hello Dario

  Well, first of all, you must check the BIOS settings. As far as I know the configuration of the device must be set to the OS installer.
  Then it s advisable to reinstall the operating system. In this case, you must use the CD recovery or the original version of Microsoft Windows. All the necessary drivers, which you can download from the Toshiba site

  Good bye

• DISCS DVD BURNER / can I replace it with new grade DVR_RW and software up, which comes from withDRIVE

  Have more old Dell computer/Dimension 4500/P4 2.4gig / iGig Ram

  running WINDOWS XP PROFESSIONAL,

  ? He is working have new in the box of DVD burner/22XDVD + R writing speed.

  8.5 GB DVD + Double layer 16 x

  DVD_R 22 X / DVD + RW 8 X/DVD-RAM 12 X / 16 X/DVD-R DL 12 X DVD + DL? CD-R48x/CD-RW 32 x.

  Registration of NERO software (Nero Express in CD)

  CyberLink & playback software

  (PowerProducter, Power DVD)

  Process CONTROW PANEL? Remove sign dvd player / then turn off computer computer open remove old drive IDE cable

  and DVD player instal Moses / if the sound card has Digital Imput add a new cable of cable/ide audéo,.

  When starting in safe mode to remove any old player not yet deleted.

  computer restart lodge on add new hardware chect, should ask to reboot to complete. ?

  If it works? Feedback wellcom

  THANKS: 4ROB

  Hi 4ROB,

  You will be able to connect the DVD recorder and install the Nero app on it, but the reader must have the connector of the IDE cable instead of SATA cable connector as the Dell Dimension 4500 comes only with the IDE connector on the motherboard.

  Please respond to all queries.

• Looking for DVD Burner for Optiplex GX260

  I have an Optiplex GX260 that has been brought to me for upgrades. Currently, it is a P4 2.4 Ghz/512 MB, 60 GB with a CD-Rom drive. They want a DVD burner installed. I was not able to find out if the GX260 can use the same internal DVD burner which uses a gx270s. Dell does not show an available update. I would like to have some information I can get on it. Thanx

  
  

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• DVD burning performance

  I own a Dell Inspiron 1520 laptop. The original operating system is Windows Vista Business Edition. I am faced with the question of the Performance of DVD burning, before I burn a DVD on 4.2 GB of data, it uses only about 20-25 minutes to complete the process.

  I'm going down the operating system, the burning process is taking time about 1 hour to complete the process of engraving on xGB 3. data and the laptop now high abnormal temp. Do not miss during the downgrade of the system? Please help solve the problem as soon as POSSIBLE.

  
  

• Creating Windows DVD - burning is not the whole video

  Hello

  Hoping someone may be able to provide me with assistance.

  I added successfully 4 VTS_01 film of video files in a project using create DVD Windows, using windows Vista. I entered all the information and personalized menu to suit me. I then run the preview everything seems very well the film will play form beginning to end.

  Now hear is my problem.

  When I burn the project to a disk, it will go through the movements of code and finally burn to the disc. Once it is finished burning, the disc is ejected.

  I'm going to play in my DVD Player menus I have made show the 4 files ok and I play the movie. But he will play only the first 28 minutes of the film. I tried selecting other scenes that won't play in the menu of the scene and yet it just starts at the beginning and only run 28 minuets and start over.

  I tried to use the DVD + RW 4.7 GB and DVD-R DL 8.5 GB think my film can now be too big once I added the menu, that's why I tried the 8.5 GB. The film was initially recorded on the DVD + RW 4.7 GB until I ran across Windows DVD Maker. The original plays very well.

  There are no problems with the discs, burner or DVD play as I have tried several, also tested incentive.

  Is there something I'm not directly in the program? Believe if the files are not compatible at all why would be him coming up in Windows DVD Maker and I would like to twick the menu and burn?

  Hoping someone can help as my film is really great on the preview.

  Kind regards

  A

  You say you converted. WMP... I'm guessing that you
  has meant. WMV?

  The duration of 88 minutes should not be too long for a
  DVD, but the project may be too complex for your
  system resources. As a general rule, small projects
  have a better success rate.

  Did you add additional files to this project? MP3
  for example music files?

  What version of Movie Maker are you running?
  Vista Movie Maker 6 or Windows Live Movie Maker?

  If it is Vista Movie Maker 6... try disabling the filters
  Movie Maker... it can have some effect on DVD Maker.
  Reach... Tools / Options / Compatibility tab and turn off
  all filters / OK.

  If you continue to have problems with burning your video
  DVD... the following freeware can be worth a try.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Please help try to copy the video in windows movie maker to burn to dvd

  First of all Hello, this is my first but I have read a lot of posts and tried to figure it out, but think I made things worse, I have a dell inspiron 15 something and a panasonic HDC-HS20, I had to reinstall windows and all pilots who, I think I did as when I put my camcorder software I began to have problems He says not to approve a 64-bit program and then it worked for a while then kept computer crashing then a black screen at start up and finally when I tried to burn videos to dvd, it says that I don't have a dvd player/burner, so I will now try to transfer my videos through Director of windows I downloaded everything it says that I need and it transfer files, but when I add them to movie maker it shoes a yellow triangle with a black exclamation point in each sinus and when I press on the bar moves along to play, but no images so im assuming that he does not, is it possible to do what I do, or I need to reinstall my software of camcorder and just hope that it recognizes my drive? any help would be appreciated.

  Thank you

  Sorry, I can't say I have now added my software that came with the camcorder, the software is called HD writer AE 1.0 and checked the compatibility of my product with microsoft and it says it's ok with a 64-bit, recharged even when software and when I click to create media that he says again in writing destination @cannot find accessible driver , so I looked through articles where dvd burner is not recognized by other programs, but he told me to go in accessories of control, performance etc. and do a right-click on the HKEY CURRENT user but it says nothing about the registry keys, it is said by default with a symbol beside him ab and under said data not defined

  Thank you

  =================================================
  The following Panasonic sheet for your camera model # HDC - HS20 States
  He records on SD/SDHC cards to the MPEG-4 AVC/h.264 format.

  Panasonic HDC-HS20
  http://Panasonic.NET/AVC/camcorder/HD/global/products/hdc-HS20/specifications.html

  Then... because Movie Maker is not compatible with this format... the best bet would be
  be to copy video content in a folder on your hard drive, convert it to a
  format Movie Maker is compatible with as WMV, then you can import into
  Movie Maker.

  The following links are not * the * solution... but can help to start.

  Movie Maker - import AVCHD files
  http://www.Papajohn.org/mm2-importing-video-AVCHD.html

  New camera with AVCHD not recognized by MovieMaker
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=231160

  Movie Makers Forums
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.