Suspended at the end of the installation of Vista (pre SP1) - Sata drive problem - how do we install?

Similar Questions

• The installation of Vista SP2 broke my computer

  I've lived in innumerable discussions on this site and many others to solve this problem the Vista SP2 has caused my computer to have. I have a Toshiba with Vista x 64 Home Premium computer and after several attempts failed to download SP2 months ago, I tried last night and after that he was 100% and restarted my computer it actually ruined my computer to be useful. I don't have a vista disc but a recovery partition. I already tried to use the restore point created by vista before installing SP2, but of course since it is vista this restore point fails and I have created several others before, but as if by magic, they are not put at my disposal. What is even more galling it broke my partition Ubuntu separate to be able load as well which makes absolutely no sense.

  I get the same error again and again as hundreds of others after SP2 installation on the black screen: ! 0xc0190036! 3029/89361 (dsound.dll) , I found a solution involving the use of partitions recovery tools command prompt to use this code:

  C:
  CD windows
  CD system32
  faultrep.dll.old Ren faultrep.dll
  output

  now, it worked the first time during this first stop in 1316/89361 on the startup process when he stopped to faultrep.dll, then of course another stop to dsound.dll happened and I tried the same thing, as advised in a support forum and it worked in the command prompt, but loading at startup it will pass fine faultrep since the fix but will not pass the dsound.dll portion.

  I ran a test of memory and a hard drive and it is absolutely not she. It was absolutely the installation of Vista SP2 all screwing.

  A lot of people with this problem have been very well when they could use their restore point, but of course vista is still inconsistent and would not allow me to restore my computer so now I have a $1200 thanks to the crap service Pack2 weight. I can log on to the recovery tools command prompt and open notepad.exe and file open to view my computers content together intact so much, I would like to know a solution for this problem. I also found a command line to uninstall SP2 with high fees, but because I can not connect via the mode without failure of all or the safe mode with command prompt, how am I supposed to use the instructions to uninstall sp2 via command prompt?

  Any help would be greatly appreciated since windows makes my computer a waste of money.

  The page I used to solve problems has been directly for the support site for windows and for exactly the same problem I have but he did nothing. http://support.Microsoft.com/default.aspx/KB/975430 is the link, I tried method 1 is the system restore and that has failed, because it fails just about my only point that shows that I did much more than restoration. Method 2 is to rename the file that stops the boot process, who worked for the first file but not the second. Method 3 is the startup repair that does not work.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; (*Problems after installing a service pack*).

• Satellite P100-324: problems with the installation of Vista-> cursor flashing

  All greetings. Tried to put one of these days of Windows Vista. But my attempts to failure are completed. After the first? There is a black screen and blinking cursor. So any activity HDD and DVD, it is not respected. Recently updated BIOS updated to v3.30. Help put already and I do not know what to invent.

  For English I apologize, I'm of the Russia :)

  Hello

  Have you tried to format the HARD drive and reinstall Vista?
  Try to access the BIOS and check if the HARD drive is recognized in law.

  What exactly happened during the installation of Vista?

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• I had to replace the hard drive on my computer and lost the installation that I pay every month for. How to install the Adobe Acrobat Pro XI on the computer again?

  I had to replace the hard drive on my computer and lost the installation that I pay every month for. How to install the Adobe Acrobat Pro XI on the computer again?

  You can download using any one of the 3 methods.

  But if it's XI Acrobat Standard, only the first step will work.

  For Acrobat Pro XI, you can use one of the 3 methods.

  1)

  Sign in to www.cloud.acrobat.com

  Then sign Adobe ID and password, and once logged in, click on the Acrobat button, it will provide you download link.

  2)

  You can download Adobe Creative Cloud applications:

  https://creative.Adobe.com/products/creative-cloud

  Reference: download, install, update or uninstall applications

  3)

  You can download it from Acrobat Pro XI of direct download link.

  During installation, select the optoin: installation using the serial number / subscription.

  Download Acrobat products | Standard, Pro | DC, XI, X

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Hello

  I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Refer

  Using creative cloud | Download, install, update or uninstall applications

• Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Try these links

  Download the CS6 products

  Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools

• The installation of Vista Service Pack 2 failed

  I had been facing a blue screen often enough lately when I downloaded the SP2. Windows has responded by "Windows can check the bluescreen the next time u log" but he wouldn't do anything.

  After downloading steps 1 and 2 were full. Step 3 0% would come the blue screen and the system will re-start. After that restart againit seems to 0%. So I chose, at the next restart, Mode without failure. Stage 3 took about an hour to reach 100%.

  And then he said that SP2 has been installed. Windows come back back change.

  Now, everything's fine. no problem at all. the system is normal.
  Only problem is that I don't get the option to install SP2 again.
  View these latest updates, he said SP2 failed.

  And I fear the same blue screen appear again if I somehow managed to get their hands on SP2.

  Aid to the blue screen and retrieve SP2.

  Hi Multiloop,
  Thank you for visiting the Microsoft Answers forum.
  I recommend you to perform a restore of the system to a point prior to the installation of SP2.

  * [Make sure that all security software (anti-virus, anti-spyware, firewall, etc.) are temporarelly disabled].
  To access the system restore, click Start and type restore, and then click Restore system from the results.

  Step 2
  ======
  Run the analysis tool
  http://support.Microsoft.com/kb/947821

  Step 3
  ======
  «Copy & paste following command prompt...» I hope this helps.

  "ipconfig/flushdns".
  CD %windir%\System32
  del /s *.chk; *.RIP; *.tmp; ~ *. *
  msiexec/regserver
  Start msiserver sc config = auto
  net stop msiserver
  msiexec /unreg
  msiexec/regserver
  regsvr32 /s msi.dll
  regsvr32 msihnd.dll/s
  net start msiserver
  Regsvr32 c:\windows\system32\wuaueng.dll/s
  net stop wuauserv
  CD /d % windir %
  rmdir /s /q c:\Windows\SoftwareDistribution
  net start wuauserv
  departure of eventlog sc config = auto obj = Localsystem
  net start eventlog
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  regsvr32 c:\windows\system32\wuaueng.dll/s
  SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  start wuauserv sc config = auto obj = Localsystem
  net stop wuauserv
  SC config bits start = DEMAND obj = Localsystem
  net stop bits
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 msxml4.dll /s
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 c:\windows\system32\muweb.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wups2.dll/s
  regsvr32 wuweb.dll/s
  net start wuauserv
  net start bits
  sc = auto config cryptsvc start
  net stop cryptsvc
  %WinDir%\System32\Catroot2 CD
  del *. * / f/q/s
  regsvr32 cryptdlg.dll/s
  regsvr32 cryptui.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 initpki.dll/s
  regsvr32 mssip32.dll/s
  regsvr32 sccbase.dll/s
  regsvr32 softpub.dll/s
  regsvr32 slbcsp.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 /s winhttp.dll
  regsvr32 wintrust.dll/s
  net start cryptsvc
  cd\
  sc config = ose start request
  net start dare
  regsvr32 qmgr.dll/s
  regsvr32 qmgrprxy.dll/s
  regsvr32 es.dll/s
  CLS
  REM * end *.
  pause
  output

  Step 4
  ======
  Restart the computer

  Step 5
  ======
  Download and install the SP2 stand-alone
  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Hope this helps

  Thank you

• Satellite Pro A300 - how to access the installation of Vista hidden partition?

  AHOY!

  I have a Satellite Pro A300 PSAGDA 2000R

  It had Windows Vista installed when I got it, but after a while, had to reformat, so I did, (I want to reformat my computer every 6-12 months on average), it came only with XP disks even if he got a serial number for Vista on the underside of the laptop so I installed XP. That was about 2-3 reformats there now.

  However, so that finding drivers I've seen mention of a hidden partition to reinstall Vista (which I hope it is 64-bit) and tried to do this several times but unfortunately it does not work, I guess that maybe what XP installation I can accidentally deleted or something? (Thought they had in fact on some solid state memory which could not be written more or something.)

  * Is there a way I can access it, take another that won't cost a ridiculous amount (for example download) or a nice person enough to create an image to download on a site or something that I can download file sharing? *

  I have also a spare copy of Vista (and a bit of XP) on the drive, none of them will work?

  + Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop? Apparently it improved performance on Vista and W7 would be convenient for running on a laptop, and I have also heard say it is possible to upgrade to the full version of the preview or W7 for a minimal cost and would probably be much cheaper than other methods if possible. +

  And I'm actually quite handy with computers, so don't be afraid to throw big words at me,

  (Tried the methods found on the manual on page 3-8 ([link: http://www.mytoshiba.com.au/support/computers/satellite/pro/a300/psagda-02000r/download?os=22]).)

  I have European A300 and I believe that the principle on the rest of the same models.
  A300 was offered with Vista preinstalled but without recovery disc Vista. Image that contains the operating system, drivers, tools and utilities for recovery has been saved on the HARD drive and with book factory owner was able to begin the installation of HARD drive recovery. It works with the factory only settings.

  With preinstalled Toshiba laptop recovery disk creator owners have been able to create the recovery disk that can be used if the disk HARD recovery doesn't work anymore.
  If you don t have access to this image saved on HARD drive recovery, you must use the recovery disc. If you don t have the disc that you have a problem. Recovery image can not be downloaded. All you can download are the unique rivers, tools and utilities that you can use if you install a clean version of the OS (operating system).
  On the European models, recovery image was recorded on the second partition of HARD drive in the folder called HDDrecovery.

  Anyway, A300 works with Win7 32 bit. I installed it on my machine and I m very happy with it.
  > Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop?
  I put t know who should give you this overview, but the fact is that you get it from Toshiba. You should check if you can get it in another way.

• Question about the installation of Vista on Tecra A8

  Hi all

  I bought today TOSHIBA Tecra A8.
  My question is when in the future, I'll have to reinstall vista how can I do?
  Installation is automatic when I start my PC.
  Is there a folder or an option to save the installation procedure on a cd or a dvd?

  You can do this very easily. Branded WXP running the BIOS update first. After doing this use the Vista CD/DVD facilities and install Vista operating system. The last step is to install all the stuff from Toshiba (drivers, tools and utilities). All these things you can find on the download page of Toshiba.

• How to get the Installation of Vista from Toshiba disk?

  I work with Microsoft technical support to solve a security problem on my Satellite Pro A210 and were now required to use a Vista installation disc.

  Microsoft says that I am entitled to an installation of the original provider of my kit disc - Toshiba. But we're not happened with my laptop - only a recovery disc has been provided.

  How can I go on the acquisition of an installation of Vista from Toshiba disk?

  Kind regards

  Kevin C.

  With Toshiba laptop, you'll get the Toshiba CD/DVD facilities only.
  This recovery media is designed for your laptop only.

  Installations from Microsoft Vista disc is not given and there is no way to get it from Toshiba.

  Microsoft can offer that you support if you only use Microsoft installations CD. Using this disk, you can install and repair Vista on each portable office/computer option. Unfortunately with the restore disc it will not work.

• Satellite P100-102 works badly since the installation of Vista

  Hello!

  I installed Windows Vista on my Toshiba p100-102 (A3E) but I had a 'small' problem. In each 3D app, I had a lot of shifts and slowdowns. I think it's a problem with the graphics card and I think the grapics card fan works slow since installing vista. Thus it reduces the mhz for a few moments (1 minute at) (I think, I'm not shure)

  so... anyone have any idea what I can do? Maybe should I use an alternativ graphics driver?

  SRY for my bad English = /.

  Oxford

  Hello

  did you properly installed all the drivers for your system? It s absoulutely necessary that everything is correctly installed and configured.
  Another thing is: Joanie to install the latest version of the bios, because I had a problem with my Satellite A100 after installation of Vista and I was able to solve it with my bios update.

  Regarding the graphics drivers, I can give you some links that might help you with your performance problems:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Try these links and you will find drivers for your VGA. And please look carefully, a lot of people I have given the link tell me that they don t find anything, but the drivers are there.

  Welcome them