SVChost.exe cpu issue with XP Pro after removal of Trojan

Similar Questions

• Using Windows XP Home - number svchost.exe - CPU to 100% for a whole day

  I have updates, set up in XP Home so that I am asked to install the updates downloaded stop. After that I did yesterday and restarted my PC, svchost.exe has operated at 100% usage for a full day. It will kill my laptop - it is almost 5 years and will not take a day more of this madness. Burn the hard drive and the CPU fan has stopped all day. I need to stop this.

  I checked the managed task and I have something like 60 and 160 000 + handles and those processes continue to increase exponentially.
  Any ideas?

  Hi Ivoman,

  Keep looking with the methods described in the answer above is one you have found probably only
  the result of another who is the real culprit.

  Update your NETWORK and WiFI card drivers could help as well. Manually review system manufacturer and device
  Sites of the manufacturer - and do not use the automatic updates that found that older drivers.

  Rob - bicycle - Mark Twain said it is good.

• Svchost.exe CPU / out max memory due to the update of Windows

  I'm having a problem with a svchost.exe process running the CPU at 100% and more than 200 000 K of memory.  The service seems to be related to Windows Update (PID 6408).  Is there any solution for this?

  Hi SF340_Driver,

  (1) you get an error message?
  (2) how did you get the information that the problem is related to Windows Update?

  Svchost.exe is a process on the computer that hosts, or contains, other individual services that Windows uses to perform various functions. For example, Windows Defender uses a service that is hosted by a svchost.exe process.

  See the link below
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Svchost-exe

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to STEP7 followed normal startup in the link.

  Method 2: Run the Windows Update troubleshooting tool

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• very strong the svchost.exe CPU utilization

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:svchost.exe. and taskmge.exe have the constant CPU after starting use, even if I have no active porgrams.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  Go to start / search and type msconfig.exe and enter and then double-click on the program icon that appears.  Go to the Startup tab and uncheck everything except Windows Defender and your AV program, click OK and restart.  See if you still have the problem.  Otherwise, it's just a matter of adding startup back both programs until the problem occurs - so you know that the cause and can leave unchecked, recheck anything else you want to start (it can be much less than what it was before the majority is not necessary), click OK and restart.  That should hopefully solve the problem.

  Download Process Explorer,http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and Process Monitor,http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx and run these programs to see if they can help to identify the real causes of the problem (this probably isn't svchost.exe, but other processes or services and these programs should help you to identify them).  Then we can decide if they are really necessary and disable or remove those who are not needed and that might solve or at least reduce the startup problem.

  I hope this helps.  If this isn't the case, after return and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ICS issues with Launcher Pro +?

  Since my Razr has been updated to ICS, I struggled with Launcher Pro + working properly. It will force close, ask me if I want to use as default time and again, it will not download wigits, and it will run like quicksand. Sometimes it is fine (30%). More time for that, what I explained above.

  Almost ready to go to the use of the home interface.

  I did a full cache clear, but it did not help.

  I enjoy using LP + but not like that. He was a great pitcher before ICS and it is quite popular.

  Someone out there who knows how to solve this, please let me know.

  Thank you

  Eileen

  
  

• missing programs after removing a Trojan virus

  After successfully removing a Trojan horse with my user account security essentials is empty! When I trie to reach through my computer, my file is "dimmed" I connected as another user to find that most of their programs are gone.  Tried to do the restore of the system, but all that stuff went too HELP!

  Helen

  Hello

  1. have you made a backup of your data?

  Some files may have been hidden and read only attribute. I would like you to follow the steps in these articles and check if they help.

  To view the hidden files and folders

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the advice above does not help and if you have not backed up your data, or / and if the data is lost forever, I'm afraid, there is nothing we can do about it and you may need to install the applications and the data once more.

• Issues with the modem with XP Pro after upgrading from xp family

  I upgraded to XP Pro and cannot create a dial-up connection because this option is not available for me. I checked the Microsoft support pages and enabled dial-up as suggested by using regedit.
  Still no difference. So I guess that the modem or the modem settings are the problem. Ive tried to download the driver couldn't get one for xp pro.can someone tell me the necessary driver for xp pro

  In Control Panel, if I go to phone options and modem, I see "Toshiba Software modem AMR COM4" but, if I go into the settings of the Modem in Control Panel, I get the message that the modem is not installed correctly and I have to uninstall and reinstall. I did this several times without success.

  He drives me crazy - can anyone help?

  Hi Mikey,

  as a first step, it would be good to know which model you have.

  Then we can compare it with other models and perhaps a driver XP modem to another model fits!

  For the first time, here is therefore a standard modem installation oder.

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  You can try!

  Pete Bye

• My (not so great) experience with Premiere Pro & after effects CC 2015 after barely a day of use.

  Right off the bat, let me say that I wish that I had not being updated until 2015 CC this morning. I blame the hype and all the exciting videos, showing off the new features to deceive me in...

  After waiting more than an hour to install everything on my Mac at work, I fell quickly on the first question when continuing on a CC 2014 project in Premiere Pro. The project has had some 4K footage with clips made in them, who I pre-rendered for an obvious reason: smooth playback. Who had worked perfectly fine in CC 2014. But in 2015, CC, it didn't yet... at all. Reposting clips did not cause to run any tool path smoothing, nor did lower the playback quality, even at 1/16 of the resolution (while in 2014 CC that would be more than enough to cause a perfect playback).

  For the same project I also need to do some work in some After Effects comps. So I opened my project and immediately, I noticed that my keyboard pressings were not record 9 of 10 times. I don't think I have to explain why this is especially annoying (and why I went to pounding my keyboard with my fists...).

  As if this was not frustrating enough, mounting Panel started to act up and remained permanently in the foreground, whenever I started a RAM Preview (I use a Setup dual monitor and my editing panel occupies essentially the right monitor). There is no way to make any application to the foreground while RAM previewing, so I ended up having to drag my editing about Panel out of the screen.

  Also, is there a way to stop the new RAM made preview? I don't know it is because of the issue of keyboard or that there simply cannot stop, since the SPACEBAR and '0' on the numeric keypad does not a billion times another thing that frustrate me even more.

  To top it off, I had to also motion-track one, and you have probably guessed Cela has also worked like a charm! * Cough *. Follow-up went well, but as soon as I tried to stop the analysis and you press the stop button, After Effects simply crashed.

  So yes, it was about my day at work. How was yours?

  Allright,-all right, I'll get to the point; Where and how do I go back to CC 2014?

  I'm done trying to force on my eyeballs to the frustration, I'll give CC 2015 another chance when these problems are solved.

  Thank you

  Rick

  Hi Daniel,.

  I've been looking around on the Forum and just found an easier way to do this via the updater of creative cloud itself:

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  The good thing is that I can now run the 2014 and 2015 versions without uninstalling one or the other.

  Thanks a lot for the tip and the response if!

  As for the issue of the first reading, I discovered that changing the rendering option in the project settings of the "GPU accelerated" for "software only" caused much less frame drops. This means that I can actually work with the 2015 first CC version! I'll stick however for now to the CC 2014 After effects version.

• issue with MacBook pro

  I left my macbook pro 2015 on my wet sheets for a few seconds

  the computer was turned off do you think there any damage for macbook after a few seconds I she took off the bed sheet was not wet but wet you think something happened to it the macbook has been in a case the macbook works well to guarantee expires 2018

  N °

  There is no possibility of damage here as long as the liquid did not get inside the Mac.

  ! don't worry about this.

  Best.

• No sound in Compaq dc5100 with XP Pro after system install

  Hello

  I got hold of a Compaq DC5100 SFF desktop computer and install a new copy of XP Pro using the key provided.  I was able to get all the drivers except for the multimedia audio controller.  I searched and searched for hours without success.  Any suggestion on how to get the sound to work?  I don't have the original installation disc.  Loading XP Pro with service pack 3

  Thanks for any help

  Kevin

  Go to Device Manager and right mouse click on the audio device and see if it indicates an error code.  What level of bios is your PC?

  Lookherefor your audio driver. It lists the ADI driver.

• NTBackup issues with the network after MS10-020 shares

  After installing MS10 - 020 (KB980232), I found that a daily NTBackup job apears to be failed - there are a number of error messages in the newspaper (following excerpt to see) and the event log contains an indication of error of NTBackup.   The specific scenario that fails is to attempt to back up to a network share (via SMB) from a client on the local network.

  Environment:

  o file on a server/NT4 SP6 shares [I know... not supported]

  o all computers that are members of a NT4 domain [ibid.]

  o failure is the same on Win2K/SP4 and Windows XP/SP3 clients

  Notes:

  o the backup works fine with deleted KB980232

  o I have not tested with a file Win2K Server or an AD domain [I'd appreciate your feedback if anyone can verify that he is [or not] working in this environment]

  o the directories/files are all accessible from the client with or without KB980232 [which leads me to believe that the problem is really with NTBackup]

  The NTBackup log excerpt:

  The backup status

  Operation: backup

  Active backup destination: file

  Media name: "BCR.bkf created on 14-04-2010 at 04:02.

  Backup of 'projects '.

  Backup set #1 on support #1

  Backup description: "set created on 2010-04-14 to 04:02.

  Media name: "BCR.bkf created on 14-04-2010 at 04:02.

  Backup type: copy

  Backup started on 14-04-2010 at 04:03.

  Folder

  Could not access portions of the directory

  Could not access portions of the directory

  \\myserver\Projects\$archives

  .

  \\myserver\Projects\

  .

  \\myserver\Projects\INSTALL. JOURNAL

  .

  \\myserver\Projects\$archives \\myserver\Projects\

  All,
  Please follow up this matter and report any new information on this subject in the Forum on TechNet.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/thread/bae1e32a-b878-4AF2-8d27-9b747e11bf21

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WLAN issues with Satellite Pro C50-A-1EL, Win8 64bits

  Hello

  I noticed a strange problem with this laptop WLAN card: it does not connect to the many points of commercial access (Netgear, Hamlet). OK the connection from a certain brands, (zyxel) but not TSF to others.

  I've already updated WLAN driver on Toshiba website, but nothing: often, it disconnects and then reconnects (maybe)

  I already changed my wifi channel by selecting the firmware the best channel available, update to access point but nothing: with some brands the C50 wlan is ok, with the other not.

  You have any ideas?

  Good bye

  > with some brands the C50 wlan is ok, with the other not.
  It seems that the aircraft had WB335 WLan Atheros 802.11bgn card.
  I think it depends on the standard WLan that is selected and used by the Access Point.
  As mentioned above, the WLan card supports the standard 802.11 b, G or N.

  I think you should check what WLan standard is used by the WLan router.

  802 11 B and G operation to 2, 4 GHz,
  802.11 N works 2, 4 GHz and 5 GHz, but only if 802.11 standard would be supported by the wireless network adapter. In your case, it s not picked up and therefore the standard 802.11 N would operate at 2.4 Ghz (20 MHz bandwidth).

  You can change the WLan standard in the properties of the WLan module.
  -> WLan card device manager-> properties-> Advanced tab
  Here you will find the various options.

  Also in the last tab power management, you must deselect the option which disables WiFi in order to save energy. So make sure that is not marked.

  Last but not least attention to the parameters of encryption like WEP, WPA (TKIP, AES, I, II).
  Different encryption settings can affect connectivity.

• Performance issues in XP after removing the Trojan horse, now get "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You know not how the computer has been maintained, which has been incorrectly installed, what is missed, what virus and spyware, there may be, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you reinstall Windows properly.

• get error messages after removing 7 Trojan horse. BHO

  I did a quick scan with Malwarebytes and it detected 7 questions that were 'Trojan horse. BHO titled"it is said that he deleted and quarantined all successfully but since then, whenever I start my laptop I get an error message"Unable to locate the ie3sh.exe component"and he said that the application could start as a BHO. DLL could not be found and that I should reinstall. Then another message comes up saying that the IE3SH application has stopped working.

  I used ccleaner and the problem persists.
  I also read that it could be linked to a toolbar called my tattoo, so I removed that as well, but it made no difference.

  Hello

  I recommend you to follow these steps and check if the problem persists.

  Step 1:

  Check if the error in safe mode.

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot and check if that helps.

  Note: Follow step 7 of article to restart your computer as usual.

  Step 3:

  Perhaps the virus is still in your computer. Download, install the Microsoft safety scanner and run it in safe mode.

  Note: You may lose any data by eliminating malware.

• After removing the Trojan horse, banking online drop-down list menu settings is so more work does not accept the password.

  To try to get rid of some Trojans, I seem to have changed a setting on my pc.  Trying to access my online bank account, the homepage accepts my ID and password, but when I fill the page next (with the drop down menu 3 letters), I am sent initially. I can't clear the checkpoint.

  I have changed and how can I solve this problem?

  Have you tried resetting Internet Explorer?

  If this is not the case, use the following article:

  Article number: 923737 - how to reset Internet Explorer settings http://support.Microsoft.com/kb/923737 There is an automatic FixIt so all you have to do is click on the button.   I hope this helps.