WLAN issues with Satellite Pro C50-A-1EL, Win8 64bits

Hello

I noticed a strange problem with this laptop WLAN card: it does not connect to the many points of commercial access (Netgear, Hamlet). OK the connection from a certain brands, (zyxel) but not TSF to others.

I've already updated WLAN driver on Toshiba website, but nothing: often, it disconnects and then reconnects (maybe)

I already changed my wifi channel by selecting the firmware the best channel available, update to access point but nothing: with some brands the C50 wlan is ok, with the other not.

You have any ideas?

Good bye

> with some brands the C50 wlan is ok, with the other not.
It seems that the aircraft had WB335 WLan Atheros 802.11bgn card.
I think it depends on the standard WLan that is selected and used by the Access Point.
As mentioned above, the WLan card supports the standard 802.11 b, G or N.

I think you should check what WLan standard is used by the WLan router.

802 11 B and G operation to 2, 4 GHz,
802.11 N works 2, 4 GHz and 5 GHz, but only if 802.11 standard would be supported by the wireless network adapter. In your case, it s not picked up and therefore the standard 802.11 N would operate at 2.4 Ghz (20 MHz bandwidth).

You can change the WLan standard in the properties of the WLan module.
-> WLan card device manager-> properties-> Advanced tab
Here you will find the various options.

Also in the last tab power management, you must deselect the option which disables WiFi in order to save energy. So make sure that is not marked.

Last but not least attention to the parameters of encryption like WEP, WPA (TKIP, AES, I, II).
Different encryption settings can affect connectivity.

Tags: Toshiba

Similar Questions

  • Satellite Pro C50 - How to extend desktop to 3 monitors?

    Hello; I am trying to extend the desktop to three screens with Satellite Pro C50.
    Please, what can I do?

    As far as I know something like this, you need additional equipment. I assume that you need USB display adapter.
    Solution could be multi-monitor adapter Matrox TripleHead2Go Digital SE or similar device.

    Google around a bit and I hope that you find a device that you can use with your laptop.

  • Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

    Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

    I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

    I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

    Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

    I have a Toshiba Satellite Pro C50 - A - 1 k 9.

    Thanks in advance.

    I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

    Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

  • Satellite Pro C50 - A - screen Black/Brown problem

    Hi all

    I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.

    I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.

    Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.

    First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.

    The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...

    I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.

    * Are there known error, malware or fault in laptops that could help me? *

    I thank very you much in advance!

    To be honest I have don recovery think t install image will help you.

    I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.

    In the past, some people have reported on similar problems, and the reason was bad FL inverter.
    The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help.

  • Can I ask a new Satellite Pro C50 - A - 1 K 9

    Hello

    I have a Toshiba Satellite Pro C50 - A - 1 K 9.
    I had a few problems with this laptop.

    First of all the battery too quickly after only a short period. I was sure it was just a bad battery, as it was fine when I got the laptop. I got a new battery, but the company that I had said that there is a known issue with the motherboard so that it was preferable to examine the issue. In the end, it turned out it was just a battery problem and he was replaced.

    My next question was that the screen flickered on and outside. It was never completely extinguished, but he went so dark, it was not usable.

    I've had the laptop picked up again and this time I was told that a new motherboard would be installed. Two weeks later I get the back of the laptop and some time then to a conference in Uni my screen flickered on and outside.

    Can anyone offer advice on what my rights are here? Can I ask for a new replacement? I am in my last few months at the University and I am on a course of systems and computer networks.

    I can't afford to be without my laptop, as the replacement I am getting are not good for what I need to do (example, last replacement loan has 2 GB of RAM, dual processor 2 GHz core, not good at all for the likes of I need to run virtual machines).

    Thank you

    This pity s and very annoying if laptop begin to hurt work and really need a bad luck if this happen twice in the line

    However, I don t think you will get a brand new replacement laptop of course that you could talk to you dealer if this replacement would be possible but I n t think the seller would accept this proposal.

    AFAIK all s laptop hardware problems will be corrected free of charge and this should be done by the authorized service provider

    So let's hope that unity will be fixed properly now

  • Satellite Pro C50 keyboard problems - A - 1 L 6

    Hello

    I just bought this new Satellite Pro.

    I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

    I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

    I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

    And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
    .
    So, this is my first experience and unlucy in the world of Toshiba...
    Is there someone who can give me some advice to solve this problem?
    It may be a problem running on the new laptops, and someone knows how to fix this?

    Thank you very much!

    Hi guys,.

    As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
    I found the new BIOS for Satellite Pro C50 - A
    http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
    Worth a try

    Another question: If someone has done to test a USB external keyboard?
    In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

  • Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

    Hi all.

    I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

    I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

    After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

    I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

    I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
    The first onewas ok, everything works. Either everyone has this problem :/

    I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

    Any suggestions what may cause the problem or how to fix?

    I think you should first clarify whether your headset is OK.

    My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

    Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

    If in case the headset is faulty, the speakers and the headphones would not work.
    So I think you should check the helmet first.

    If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
    Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

    The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

    However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

  • Satellite Pro C50-A-1E4 - how to merge partitions?

    My laptop is a Satellite Pro C50-A-1E4 running Windows 7 Pro 64 bit.

    In receiving a year ago, I replaced the hard drive with a 256 GB SSD. I partitioned in a 60 GB C drive and a 192 GB D the rest drive is the hidden restore partition.

    I have install all the software on C and my personal stuff on D.
    Now, the C drive is nearly full, but there are a lot of free space on D.

    Can you advise me how reallocate for example 20 GB from D to C with nothing to lose?
    I would like to make a complete backup of the drive D.

    Basic support for Windows (seems to me) to sit on a hard drive where the bottles must be adjacent, but I'm assuming that does not apply to an SSD.

    Any help and advice would be appreciated.

    Thank you.
    Harold

    Hello

    I recommend you to use a 3rd party software called Gparted.
    http://gparted.org/LiveCD.php

    Its freeware software that allows you to change the partitions on SSD or HARD disk.

    You can create a bootable USB flash memory key and might start Notepad to change the partitions.

    This s really great freeware software.

  • Impossible to change the bright screen on Satellite Pro C50-A-143

    I run windows 8.1 and I could not change the brightness of the screen for a while now.

    It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

    According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
    I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

    Is this correct?

    Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
    Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

    Then you should be able to use the function key to decrease and increase the brightness of the display.

  • Re: Windows 7 on Satellite Pro C50-A-1HQ

    I have a Satellite Pro C50-A-1HQ with windows 8.1 and I'm pretty tired of this OS because of problems with the use of disc 100% that I get sometimes and I have not been able to solve.

    I would like to install windows 7 in this labtop. Do you know if there is a problem with that? Windows7 will work fully? I need to change anything before I install it?

    Thanks to you all!

    I don't know what can be wrong with the use of disk, and I hope that you tried to optimize version of the OS preinstalled.
    I visited the Toshiba download on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and I found all the drivers, tools and utilities for Win7 64-bit if your machine is fully supported. To be honest I think that your machine will work fine and stable with Win7.

    Before do you anything create recovery disk (DVD or USB) using preinstalled Toshiba recovery disc creator and you can use it at any time if you have notebook with factory again.

    See also http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

    If you have any other questions you are welcome.

  • Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

    Hello

    I own Satellite Pro C50-A-1E2.

    Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
    I am trying to get into the BIOS but without success.

    I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

    I found this piece of information through Googling: "press f2, and then press power. But always without success.
    Help with my problem?

    Thank you.

    Hello

    Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

    Check it out.

    By the way: for some series laptop, press INS key then F2 worked too.

  • Should what ram I use in Satellite Pro C50 - A - 1 M 3

    Hello

    I recently bought the Satellite Pro C50 - A - 1 M 3. Reference number: PSCGKE-00M00GEN and since I have an old RAM stick from my previous laptop which is: Kingston, KVR1333D3S9 / 4G, 204-pin DDR3 SO-DIMM, DDR3 1333, Pc3 - 10600 CL9 204 pins

    I was wondering what would be compatible with my Toshiba laptop?

    Thank you for your time and your attention.
    Concerning
    Jim

    This unit manages the DDR3 SODIMM and these modules supports 204pins

    So I think your DDR3 SODIMM module could be compatible

  • Re: How to install Windows on the new Satellite Pro C50 8.1?

    I just bought a TOSHIBA SATELLITE PRO C50, that came with Windows 7 pre-installed.

    When you start the system for the first time, I simply close and put Windows 8.1 media into the optical drive (disc 1 of 4) then entered the Recovery Wizard and may have chosen the wrong option, because I completely erase the hard drive and partitions.

    Now that I did it, I can't find how to install the Windows Media Pro 4 DVD provided 8.1. I can't find the correct option to do this. I changed the startup option in the control panel by pressing F2 at startup, so it reads from the DVD player. The DVD starts but then takes me into a recovery area of the system, which is not good as I wiped the system completely.

    How can I just now to install the Pro 8.1 provided Windows on the clean system right now?

    Thanks for any advice.

    First, I would like to know what model of laptop you have exactly. If possible, please report the entire model number (C50-xxxxx). I just want to check the specification for this model of laptop.

    Did you buy this laptop as any new product and model in box?

    Anyway, if you have installation discs original recovery for this, you should be able to install it without problems. Start your laptop and press F12 to get into the boot menu. This menu wil shown on the screen, insert disc 1 into the optical disk drive, choose the CD/DVD drive from the menu, and then press ENTER.

    ODD must start reading Wizard disk / recovery will be shown o the screen. Choose the option to install out-of-box / factory settings and just follow menu on the screen.

  • Can I get ODD in Satellite Pro C50-A-166?

    Hi there - I have a Toshiba Satellite Pro C50-A-166, product code pscg7e-00y002en, this laptop has no internal optical drive dvd rw standard, but it has a space with a plastic cover in the form of an optical drive to shutter.

    Anyone know if you can hold DVDRW internal optical drive in those laptops please? and if so what models could fit?

    Thank you James

    Hello

    I don't have this model of laptop, but some models C50 - A Satellite there optical drive therefore, theoretically, it should be possible to mount a more. I found the info that Satellite C50 - next to 5.25 inches and manufacturer is Panasonic, model UJ-841.

    Try to remove this cover and check if the connector is available.

  • Satellite Pro C50 - A - 1 K 9 - use of the HARD Drive Caddy

    Hello

    When I got my new laptop the first think I did was to install an SSD.

    I don't usually use my optical Bay so I am planning to install a HARD drive enclosure.
    Someone has already done this, and if so have you had any problems? Also, what are data transfer speeds?

    Thank you

    Fraser

    I can't tell you if this extra HARD drive caddy will work in the Satellite Pro C50 series STRANGE Bay - A - 1 K 9 because that depends on the support of the BIOS and the controller.

    I read about these updates several times in different forums and to be stone, sometimes it is possible, but in many cases, the BIOS does not recognize this drive caddy HARD and laptop does not start.

    In the case where you have already tried these updates, please share the details with us!
    I think it would be very interesting for others, if this update worked correctly.

Maybe you are looking for