No sound in Compaq dc5100 with XP Pro after system install

Similar Questions

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use

• New printer Officejet - 8610 pro - after having installed a noise strong cartridges occurs

  Trying to set up a new printer, Officejet Pro 8610. Installed the cartridges - when he tried to calibrate them there was a clicking noise, it cancelled the calibration.  The sound repeats whenever I try to do anything. I tried to reinstall the cartridges. The machine itself does not indicate a problem, and seems to be ready. So far I tried only to copy, which failed. Everything turns and noise.

  The problem was solved by replacing the printer.  Believe me, I've tried all the tricks, reloading, disconnect, etc..  Finally called HP Support - which was very good - and they have helped me determine that I had bought a defective machine.  Replaced it and the new one works fine.

• Issues with the modem with XP Pro after upgrading from xp family

  I upgraded to XP Pro and cannot create a dial-up connection because this option is not available for me. I checked the Microsoft support pages and enabled dial-up as suggested by using regedit.
  Still no difference. So I guess that the modem or the modem settings are the problem. Ive tried to download the driver couldn't get one for xp pro.can someone tell me the necessary driver for xp pro

  In Control Panel, if I go to phone options and modem, I see "Toshiba Software modem AMR COM4" but, if I go into the settings of the Modem in Control Panel, I get the message that the modem is not installed correctly and I have to uninstall and reinstall. I did this several times without success.

  He drives me crazy - can anyone help?

  Hi Mikey,

  as a first step, it would be good to know which model you have.

  Then we can compare it with other models and perhaps a driver XP modem to another model fits!

  For the first time, here is therefore a standard modem installation oder.

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  You can try!

  Pete Bye

• Calendar Creator more than Power UP software compatibility with W7 Pro operating system

  I am running Calendar Creator more than power upward on a laptop XP Pro (SP3) and Vista desktop. I upgraded a second office linking W7 Home Pro for compatibility features but can not get the W7Pro to run the calendar program. I went through the screens of compatibility W7Pro without success. I moved the program from one computer to another for years with no real problems so far. I LOVE my calendar program and need advice how to solve the problem of compatibility W7Pro.

  By the program area, some of the system requirements are as follows:

  80386 or higher IBM or compatible PC: 3MB RAM: Windows 3.0 or higher:

  Its a very old origonally program for win3.0 and could thus be a program 16 bits, and if you have win7 64 bit his will never run unless you use an emulator, such as DosBox.

  Basically, you can solve a problem of compatibility, otherwise that by getting an update of the program, if such exists, or using an emulator or virtual winxp, but one such solution will be more difficult than its worth (if even that works)

  Time to move and use the calendar provided in windows live essentials, or another more upto date schedule program

• My (not so great) experience with Premiere Pro & after effects CC 2015 after barely a day of use.

  Right off the bat, let me say that I wish that I had not being updated until 2015 CC this morning. I blame the hype and all the exciting videos, showing off the new features to deceive me in...

  After waiting more than an hour to install everything on my Mac at work, I fell quickly on the first question when continuing on a CC 2014 project in Premiere Pro. The project has had some 4K footage with clips made in them, who I pre-rendered for an obvious reason: smooth playback. Who had worked perfectly fine in CC 2014. But in 2015, CC, it didn't yet... at all. Reposting clips did not cause to run any tool path smoothing, nor did lower the playback quality, even at 1/16 of the resolution (while in 2014 CC that would be more than enough to cause a perfect playback).

  For the same project I also need to do some work in some After Effects comps. So I opened my project and immediately, I noticed that my keyboard pressings were not record 9 of 10 times. I don't think I have to explain why this is especially annoying (and why I went to pounding my keyboard with my fists...).

  As if this was not frustrating enough, mounting Panel started to act up and remained permanently in the foreground, whenever I started a RAM Preview (I use a Setup dual monitor and my editing panel occupies essentially the right monitor). There is no way to make any application to the foreground while RAM previewing, so I ended up having to drag my editing about Panel out of the screen.

  Also, is there a way to stop the new RAM made preview? I don't know it is because of the issue of keyboard or that there simply cannot stop, since the SPACEBAR and '0' on the numeric keypad does not a billion times another thing that frustrate me even more.

  To top it off, I had to also motion-track one, and you have probably guessed Cela has also worked like a charm! * Cough *. Follow-up went well, but as soon as I tried to stop the analysis and you press the stop button, After Effects simply crashed.

  So yes, it was about my day at work. How was yours?

  Allright,-all right, I'll get to the point; Where and how do I go back to CC 2014?

  I'm done trying to force on my eyeballs to the frustration, I'll give CC 2015 another chance when these problems are solved.

  Thank you

  Rick

  Hi Daniel,.

  I've been looking around on the Forum and just found an easier way to do this via the updater of creative cloud itself:

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  The good thing is that I can now run the 2014 and 2015 versions without uninstalling one or the other.

  Thanks a lot for the tip and the response if!

  As for the issue of the first reading, I discovered that changing the rendering option in the project settings of the "GPU accelerated" for "software only" caused much less frame drops. This means that I can actually work with the 2015 first CC version! I'll stick however for now to the CC 2014 After effects version.

• SVChost.exe cpu issue with XP Pro after removal of Trojan

  My sister recently downloaded a virus on my computer. I removed the Trojan horse and have had problems with SVChost.exe are beginning to eat time CPU. This is usually triggered when I start Firefox. It may be unrelated, but I do not. I did a uninstall/reinstall on Firefox and now it will briefly be blip in the Task Manager process tab, but it disappears almost immediately.

  I service Pack3 on my machine, so I don't think it's the SVChost service Pack3 fixed problem. I ran a repair of XP once I have nuked the Trojan horse. I ran across the virus alarm area scan, adaware, and malwarebytes to make sure that the thing had gone gone gone.

  I did a check on what is in the regedit for svchost, and it has the following:

  default reg_sz

  DcomLaunch REG_MULTI_SZ

  DOT3SVC

  REG_MULTI_SZ

  DOT3SVC reg_multi_sz

  eapsvcs REG_MULTI_SZ

  getPlusHelper REG_MULTI_SZ

  HTTPFilter REG_MULTI_SZ

  imgsvc reg_multi_sz

  LocalService REG_MULTI_SZ

  netsvcs reg_multi_sz

  NetworkService REG_MULTI_SZ

  RPCSS reg_multi_sz

  termsvcs REG_MULTI_SZ

  wudfservicegroup reg_multi_sz

  I did some research, and I don't know where to go next. I think it's a registry issue maybe, or a svchost corrupt, but since I have service pack 3, I don't know if there is something else I can do, especially since the question seems to start when I start Firefox. Don't use not Firefox may be an answer, but I really want to make sure that the problem is resolved so that my computer is not get no more corrupt than it already is.

  I saw in my research programs will supposedly fix your registry database, but they seem to be more malicious sites, so I am wary of downloading something that is not specifically to Microsoft. Does anyone have a suggestion as to what I might want to do next? Everything I've read seems to indicate the problem but not the solution. Thank you for taking the time to watch it!

  Beki

  I think you can still infected?

  Try to run one scan of other suppliers and also if you want you can send me your HijackThis report for analysis on my e-mail address in my BIO profile.

  What the name of the Trojan horse?

  NASS - http://www.nasstec.co.uk

  Thanks Nass and Paulogergo,

  I think that I fixed it. I have re-ran all my antivirus programs and I did forget to empty my cache and temporary files. I clear up the registry and system files. I think that the real culprit was Zone alarm. They have this new feature, called force shield. I didn't know that there was a cache that had to be cleared out. Thus, the register needed to be cleared up, but the problem of Firefox was my firewall program. My machine worked fine for the last half hour with no slow worms down or my sessions of cpu overloaded. I run a defrag during the night to make sure. But it seems that everything is copacetic. Thank you so much both to look at this for me. I have not had a virus in 10 years and I forgot what I didn't.

  Beki

• Compaq Presario SR1760AN AMD3200 + hangs after system restore just after the XP splash screen.

  Epic to date.

  PC not working and suspended on the start Recovery xp splash screen.

  1 wouldn't start or start SafeMode etc.

  2. out of hard drive and plugged on the other pc to save important info because that wouldn't boot. Copied files-WHEW

  3 restarted and tried to recover from D:\ recovery software. -Hangs on reboot after the start screen each time ARGH.

  4 caught Recovery CD that were made when the PC was brand new - failed 5 times! IE system hang after starting xp

  5 Pen Drive has created and initialized Compaq ISO - PC Doctor DOS Version.

  6. inspected PC - found a hard drive to have multiple errors and so dead - replaced by wd 500 GB drive NINE.

  7 PC DOCTOR BACK - pass all other systems, motherboard, RAM, etc.

  8 were again trying to install from the recovery CD "R"is only an option as no recovery partition." 2 unsuccessful attempts so far.

  9 think about jumping from the Westgate bridge.

  Please help if you have any ideas or if I missed something extreemly critical please let me know.

  Signed

  Frustrated, exhausted, SAD ...

  GDay Ruette,

  PROBLEM SOLVED.

  Has decided to remove Kboard and rear USB ports USB mouse and stick 'em in the front.

  HEY PRESTO START!

  Obviously a problem with the rear of the motherboard well that the PC doctor reported no problems.

  OH well Im happy like a cat in #$% T. Update for XP3 reinstalled updates of all HP SP for this system and we are offshore and running. TIP for any related problem: always google and read similar messages: you can often find the answer that I did.

  

• Mercury CUDA does not allow when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks installed

  Use the same configuration from CS5 with mercury CUDA works perfectly. After that the recent upgrade of the OS X 10.9 mercury CUDA is no longer available and the only lets me run with either OpenGL or software. IM using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the program GPUSniffer in the latest files from Premiere Pro 7.1.0. The LAST line made me hugoverolariviere because it first on the list of supported map in the file 'cuda_supported_cards.txt '. Someone else has seen this?

  -OpenGL Info-

  Provider: NVIDIA Corporation

  Rendering engine: NVIDIA GeForce GTX 285 engine OpenGL

  The OpenGL Version: 2.1 NVIDIA - 8.18.27 310.40.05f01

  GLSL Version: 1.20

  Monitors: 1

  Monitor properties 0-

  Dimensions: (0, 0, 1920, 1080)

  Texture size max: 8192

  Supports the power of two: 1

  444 shaders: 1

  422 shaders: 1

  Shaders 420: 1

  -Calculation GPU info-

  Found 1 devices that support for GPU Computing.

  Peripheral OpenCL - 0

  Name: GeForce GTX 285

  Provider: NVIDIA (Apple platform)

  Capacity: 1.2

  Driver: 1

  Total video memory: 1024 MB

  * Is not enabled by default because it does not match the list named cards.

  Since it worked before mavricks and does not work after... the mavericks that leaves a conclusion... mavericks

  Go to http://forums.adobe.com/community/premiere , and the area just below to ask a Question, typeRegeditdans

  Mavericks

  You can now read all the previous discussions on this topic... do not forget to click on see more results at the bottom of the initial list, if the initial list does not answer your question

  I am Windows so do not favorite the message, but at least a message thread has a possible solution for SOME problems of mavericks

• Need help with Toshiba record after recovery installed

  After that I completely reinstalled my laptop with the recovery CD, Toshiba notifications (icon in the lower right corner) program no longer works because it asks me to register and when I do, I said already registered BUT I can't use it again and it continues to display after each start upward.

  What can I do to work for him again?

  Maybe the TEMPO system has something to do about it. I'd appreciate some research more on this issue, because I have a similar problem. Greetings

• Error 0 x 80244019 prevents the update XP Pro after re - install

  I ran XP Pro SP3 and Security Essentials successfully for at least 18 months, until that forced software corruption a reinstallation is complete. A new installation of XP Pro SP2 from CD can now be updated from the Microsoft Update site due to error 0 x 80244019. I have kept out of the reactivation of the OS until some error was erased. Help please!

  You need to reinstall XP SP3 for windows update to work.

  Windows XP SP3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  I hope this helps.

• 2 problems with a new operating system installed

  Hello. I had a problem with my new istalled windows XP. I can't use text fields in IE and system restore (description of control point). There are also 2 opened with items in the context menu of files. What to do

  Hello Alpha,

  You must have windows media player to integrate its function in your browser. And to open it with windows. You will need to Open regedit. Then navigate to HKEY Classes root.
  Find the file extension that gives you these open wrong with programs, and you should find OpenWith list and many others. If you do not find it open with list here so watch the file type and scroll down and find the type of file name and search for.

  -Alex

  EDIT: actually, here's a list of locations to search:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithList

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithProgIDs

  HKEY_CLASSES_ROOT\.xyz\ OpenWithList

  HKEY_CLASSES_ROOT\.xyz\ OpenWithProgIDs

  HKEY_CLASSES_ROOT\SystemFileAssociations\\OpenWithList

• Can't activate windows xp pro after re install

  I tried again to install windows xp professional on 7 laptops and none of them will be activated. They are in a school and have a volume of education license. I went through activating by phone and it says can not activate. I then spoke to someone at this number who said I had to pay $110 plus tax to fix the problem. I'm at a complete loss as to why they don't will not activate if I have a valid volume license.

  Hello

  I looked towards the top of the Volume License product key, and I don't see anything extraordinary.  The key is blocked Activation but it is normal that the key to Volume license older XP given that these license keys of Volume more circumvented the need to activate.

  Microsoft has created new Volume license key when it was found that Activation Bypass Volume keys (time when the internet became big) are so easy to hack someone leaking just the key to the internet. However, as far as I understand it, the older keys are still valid as long as they were not sunk or abused. I searched the internet for this key and the key does not seem to have been disclosed.

  As for the message 'not installed Validation control' Windows XP came not with the genuine Validation feature "baked in" at the launch.  The Genuine Advantage Notification update adds Validation controls to XP (user does not have to install the update, it's purely optional).  The user can also simply go to http://www.microsoft.com/genuine/validate , the user will be prompted to install the Validation controls and then the online Validation will take place.

  At this point I see nothing suspicious on the Volume of this user license key, and also long as on-line Validation returns as authentic, I believe that the key is valid and authentic.

  Thank you
  Darin

• Wrong with Illustrator CS4 after I installed upgrading Lion

  Message "an unknown error has occurred" when you try to open Illustrator cs4 after upgrade to Lion.

  I use a Mac Pro early 2008

  Processor 2 x 2.8 GHz Quad - Core Intel Xeon

  Memory 10 GB 800 MHz DDR2 FB-DIMM

  Graphics  NVIDIA GeForce 8800 GT 512 MB

  Software  Mac OS X Lion 10.7.2 (11 c, 74)

  I have all the CS4 Master Collection on this machine.

  Have not tried other programs.

  Any help to ease this transition will be appreciated.

  Found this link: http://support.apple.com/kb/DL1421

  After you download Java for OS X Lion update 1 Illustrator works now.

• System hangs when the computer sleeps with error KMode_Exception_Not_Handled after generation installed 9926

  Since the new version update (9926), whenever my computer goes to sleep or when it is left for several hours compress I get unhandled KMode Exception error.  I deleted a suspicious program who has problems during the previous generation, but that made no difference.  When the computer restarts, I wonder if I want to use the previous windows platform and I encounter the KMode problem, but after a day or two, the computer did an update to 9926 and I started having the problem again.  I looked for all devices that are evidence of a driver problem and have not found any.  Tech is able to examine the file DMP to give me a clue as to the program/device must the fixed driver so that I can get past this error?  Here is a link to the folder that contains the file.

  https://onedrive.live.com/embed?CID=932A5B907D806E8A&RESID=932A5B907D806E8A%21225306&AuthKey=AMaX68Y4-fpbXcE

  I looked in the pilot and I have the most up to date, but I was able to solve the problem until the next update by turning on my screensaver and do not allow the HARD drive to sleep.