SVGImage rendering problem

Similar Questions

• Firefox 6 rendering problem

  I use the 64-bit version of Ubuntu 11.04, under Ubuntu Classic, using the proprietary ATI 11.5 driver. Firefox 6 was installed via a Firefox-stable channel update.

  I have not had absolutely no problems with previous versions of Firefox, until I did an upgrade, and the window of Firefox stops made correctly, as seen in the below screen Cap.

  Essentially outside the window on the top control bar, everything else seems to be rendered double and rendering is miss align the axis Y.

  As I move my mouse around, all interactive objects gets returned again and incorrectly. What makes Firefox largely unusable.

  BTW, I tried to start firefox in SafeMode to aid
  Firefox-safe-mode
  The browser started without addons but rendering problem is always thre.

  Am I the only one seeing this? And how to fix it?

  I posted the same question to the askubuntu.comcourse and didn't get any resolution, but I posted the image of the display problem. The link below:
  Image display problem

  Try turning off hardware acceleration.

  • Edit > Preferences > advanced > General > Browsing: "use hardware acceleration when available.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• With rendering problems. Rendering started taking 10 times longer. I have pleanty of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  With rendering problems. Rendering started taking 10 times longer. I have a lot of memory, I cleaned the media cache and now it will not even made a single wipe small transition. Goes at the beginning of the timeline, as if she has made the effect.

  I determined the cause. Damaged media. Copy old sequence in new chronology cross me if I return after any change in the timeline. I am able to export own media. No change to hardware and software recently. I'm running Windows 10. (Hatred, dating back to 7)

• Rendering problems Photoshop CC - distorted color and the missing Pixels

  I recently started having significant rendering problems, manifesting themselves in several ways:
  (1) some images show noise and color rendering problems, which are constantly changing as a layer is activated (see example).
  (2) this same noise made its appearance in the images I cut and paste into files, where is appears that the pixels are simply missing. For example, if I try to copy an image approximately half of the pixels are simply missing.

  (3) if I opened, even a simple picture it seems as if some or all of the pixels are simply absent. The missing pixels change every time I try and open it - (see example).
  (4) if I crop a picture, most of the pixels go away.

  I'm currently under Photoshop CC 2015 on a MacbookPro v10.10.3. All of these same images air outside of Photoshop, so there seems to be a problem specific to Photoshop. The problem seems to be the same on my big screen and Macbook Pro screen. Any help is very appreciated, because this does not work.

  

  
  

  Thank you very much, the updated Mac system seems to have cleared up the question, to my relief.

• Rendered inDesign error/Bug - not adding vector source causes a slight rendering problem

  Very well; This has bothered me for some time and just recently was able to identify the source of this problem.

  Sometimes, you will notice the same layouts with very small displacements, problems of weight and other adjustments case loosed. I can see these slightly in InDesign views, but it is very spectacular inside a PDF file... I noticed this slight mistake throughout the presentations all the time.

  I was able to recreate the problem and find out the reason. There was a single image, a scan of my signature, placed as a psd, that appears on my front page and not on the second page of my CV. Remove this immediately resolved image rendering problem involving displacements of the hairlines and weight problems, that I had with the cover page. Replaces the psd placed with other images didn't help.

  I replaced the image of the signature with a vector trace and Yahtzee - no bug rendering more. As much as I can say that the problem is with raster images.
  Pages with only the vector components and display of pixelated text data.

  I did not have the opportunity to play with Adobe Creative Cloud, I hope that this is no longer a problem.

  Sounds like well-known transparency rendering effects.

• Weird rendering problems?

  Hello

  I recently stopped making videos to have a break, but now I'm back... but Im meet strange rendering problem.

  I use Adobe first Pro CC, my PC specs are

  Intel core i5 2.8 GHz

  4GBs of RAM

  GeForce GTX 760 (Asus OC version)

  64-bit Windows 8.1

  Now to the problem. I made the video normally, everything is normal. But when I play the video back, the audio is synchronized to the beginning, then starts to to unsync slowly as and video.

  But it does not stop there. The video randomly forward gears, and then jump back 5 seconds. The video continues for about 30 seconds, speed up, then jumps back again.

  I tried to export the video and audio separately, but nothing helped.

  I tried several file formats and rates and sizes, same problem.

  It should be noted that the video plays well in the program, just as it is exported, things will go wrong.

  I know this may be hard to fix, but any help appreciated.

  If you need more info, just ask.

  Thank you.

  Edit: it is worth noting that I changed my graphics recently, which may or may not be the cause.

  I thought about it guys. What I did use Handbrake to convert the original file to mp4 format and then I exported audio and video separately and put them together.

  Thanks for all the help guys!

• Multiple, overlapping nodes or canvas in a pane: the sequence of rendering problems

  I have the following problem:
  
  1 stream outside, inside the following items in the following order:
  ... (1) canvas (0,0,100,100)
  ... (2) button (0,0,100,30)
  ... (3) the canvas (90,90,100,100)
  ... (4) button (90,90,100,30)
  So there is an overlapping area of 10 x 10 (between 1), (2) and (3), (4).
  
  When moving with the mouse on the button 4 then 1-canvas is drawn on the 2 key - that is not correct.
  
  It seems to me like a-sequence/dependency-rendering problem: moving the mouse makes again 4-button, triggering a new rendering of the Web 1 because of that overlap, but 2 buttons seems not to be re-rendering.
  
  Is there a "thought/understanding" - problem on my side? -No suspicion is apprecaited...
  Thank you!
  
  
  
  
  This is the code to reproduce, when running: move the mouse on "(4) button.

  package ztest;
  
  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.canvas.Canvas;
  import javafx.scene.control.Button;
  import javafx.scene.layout.Pane;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  
  public class Test_40_Canvas extends Application
  {
      class MyPane extends Pane
      {
          Canvas m_canvas1;
          Button m_button2;
          Canvas m_canvas3;
          Button m_button4;
          
          public MyPane()
          {
              m_canvas1 = new Canvas();
              m_button2 = new Button();
              m_canvas3 = new Canvas();
              m_button4 = new Button();
              
              getChildren().add(m_canvas1);
              getChildren().add(m_button2);
              getChildren().add(m_canvas3);
              getChildren().add(m_button4);
              
              m_canvas1.setWidth(100);
              m_canvas1.setHeight(100);
              m_canvas1.getGraphicsContext2D().setFill(Color.GREEN);
              m_canvas1.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button2.setText("(2) Button");
              
              m_canvas3.setWidth(100);
              m_canvas3.setHeight(100);
              m_canvas3.getGraphicsContext2D().setFill(Color.BLUE);
              m_canvas3.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button4.setText("(4) Button");
          }
          
          protected void layoutChildren()
          {
              m_canvas1.resizeRelocate(0,0,100,100);
              m_button2.resizeRelocate(0,0,100,30);
              m_canvas3.resizeRelocate(90,90,100,100);
              m_button4.resizeRelocate(90,90,100,30);
          }
      }
      
      public static void main(String[] args) { launch(args); }
  
      MyPane m_pane;
      
      @Override
      public void start(Stage primaryStage)
      {
          primaryStage.setTitle("Hello World!");
          final Scene scene = SceneBuilder.create()
               .root
               (
                    m_pane = new MyPane()
               )
               .build();
          
          primaryStage.setScene(scene);
          primaryStage.show();
      }
      
  }

  I consider this behavior a bug. A quick and dirty solution would be the following, even if I do not want to do that in a real application:

  package ztest;
  
  import javafx.application.Application;
  import javafx.scene.DepthTest;
  import javafx.scene.Scene;
  import javafx.scene.SceneBuilder;
  import javafx.scene.canvas.Canvas;
  import javafx.scene.control.Button;
  import javafx.scene.layout.Pane;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  public class Test_40_Canvas extends Application
  {
      class MyPane extends Pane
      {
          Canvas m_canvas1;
          Button m_button2;
          Canvas m_canvas3;
          Button m_button4;
  
          public MyPane()
          {
               setDepthTest(DepthTest.ENABLE);
  
              m_canvas1 = new Canvas();
              m_button2 = new Button();
              m_canvas3 = new Canvas();
              m_button4 = new Button();
  
              getChildren().add(m_canvas1);
              getChildren().add(m_button2);
              getChildren().add(m_canvas3);
              getChildren().add(m_button4);
  
              m_canvas1.setWidth(100);
              m_canvas1.setHeight(100);
              m_canvas1.getGraphicsContext2D().setFill(Color.GREEN);
              m_canvas1.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button2.setText("(2) Button");
  
              m_canvas3.setWidth(100);
              m_canvas3.setHeight(100);
              m_canvas3.getGraphicsContext2D().setFill(Color.BLUE);
              m_canvas3.getGraphicsContext2D().fillRect(8,8,92,92);
              m_button4.setText("(4) Button");
          }
  
          protected void layoutChildren()
          {
              m_canvas1.resizeRelocate(0,0,100,100);
              m_canvas1.setTranslateZ(4);
              m_button2.resizeRelocate(0,0,100,30);
              m_button2.setTranslateZ(3);
              m_canvas3.resizeRelocate(90,90,100,100);
              m_canvas3.setTranslateZ(2);
              m_button4.resizeRelocate(90,90,100,30);
              m_button4.setTranslateZ(1);
          }
      }
  
      public static void main(String[] args) { launch(args); }
  
      MyPane m_pane;
  
      @Override
      public void start(Stage primaryStage)
      {
          primaryStage.setTitle("Hello World!");
          final Scene scene = SceneBuilder.create()
               .root
               (
                    m_pane = new MyPane()
               )
               .depthBuffer(true)
               .build();
  
          primaryStage.setScene(scene);
          primaryStage.show();
      }
  
  }
  

• Flash/Flex itemEditor rendered problem!

  Hello
  
  I created an itemEditer simple checkbox in a DataGrid control. It works wonder... you check the box and data from fact that it is supposed to do (in this case just take the ID of the item that are enabled).
  
  However, the problem starts when a user decides to move to the top and to the bottom of the data grid to have a peak at those point not to not be displayed. You can see an example here (click on the 'renew contracts' button to see the contract ID of what you checked)- click me!
  
  As you can see, when a scroll the user and flash makes the items newly posted, it checks random and UN-controls the boxes on the right, but if you click again on the button 'Renew contracts', you will see that it has not affected actually what you checked literally (which suggests that it is actually a rendering problem).
  
  Any help on making flash itself behaves and display check boxes that have actually been checked by the user would be much appreciated.

  Hello

  I created an itemEditer simple checkbox in a DataGrid control. It works wonder... you check the box and data from fact that it is supposed to do (in this case just take the ID of the item that are enabled).

  However, the problem starts when a user decides to move to the top and to the bottom of the data grid to have a peak at those point not to not be displayed. You can see an example here (click on the 'renew contracts' button to see the contract ID of what you checked)- click me!

  As you can see, when a scroll the user and flash makes the items newly posted, it checks random and UN-controls the boxes on the right, but if you click again on the button 'Renew contracts', you will see that it has not affected actually what you checked literally (which suggests that it is actually a rendering problem).

  Any help on making flash itself behaves and display check boxes that have actually been checked by the user would be much appreciated.

• PowerBook G4 aluminum screen rendering problems

  Hello. I use an old PowerBook G4 aluminum 15 " only for some older programs that I still have, the specs are 1.33 GHz, 1 GB DDR SDRAM, an A1095 model (I think). It is currently running OS 10.4.11 Tiger.

  I am having some problems with the rendering of images, windows and icons on the screen. Sometimes, say if there is a background image, there will be pixels of a pure purple and light green color and other parts of these colors in pants plates, which will fade in-and-out in intensity. There will be a purple halo around the icons on the desktop, windows will have their underlined by violet title bar and the window itself will be celebrating also in purple. When I move these icons and windows, the outline of color moves with him - even for images with these pants patches. If I try to take a screenshot, it looks like it has taken to this effect, but when the screen goes back to normal, the images do not show fading.

  There is also a kind of shear horizontal wind that comes and goes, like a Photoshop effect, which seems to affect the whole screen - but it was did not so lately, moreso just the pants colors. The effect of shear wind or rosacea are affected by the position of the screen.

  These are intermittent problems that come and go, sometimes they may not arrive for a few hours or a few days, and sometimes they keep coming back and to stay - they also vary in intensity, sometimes just annoying, other times made the screen so bad that I have to do a hard shutdown with the power button.

  I have connected this laptop to a LED TV (via a HDMI DVI cable) when I had these patches scrambled on the computer laptop screen - and the TV screen shows very well, without tasks.

  After asking some Apple technicians, they thought it could be anything from:

  -l' screen is gone - but why would move fading when I move the images/icons/windows?

  -a bad laptop screen cable

  -video card - but she restores the fine screen image when connected to a TV?

  -memory on the logic board

  -poorly seated RAM (which I've deleted and reinstalled several times with the same results)

  Or a combination of these. They say this isn't a problem with HD.

  I understand that it is an old computer and an old technology, but I would still go back to normal, as everything else works fine. I know a guy who can replace the screen and the cable, as it seems a little tricky for me to do would not touch the video card. I'm wary about this fact, because it may be other things that causes this problem.

  In addition, the graphics card is an ATI Mobility Radeon 9700, model: ATY, RV360M11 - if it helps.

  Any ideas - thanks. (Please keep it relatively simple, if possible)

  As the connected HDTV does not have this effect, the problem is likely related to the PowerBook's display hardware.  If the problem was related to the graphics card (and 'upstream' material) or due to a software problem, waiting for HDTV to show the same effect at a time when the PowerBook display is the effect.

  You can try to do a reset PMU (power management)

  Resetting PowerBook and iBook Power Management Unit (PMU) - Apple Support

  and that he may as well do a LANDAU ('NVRAM') reset too (although less likely to cause described problem)

  How to reset the NVRAM on your Mac - Apple Support

• Rendering problem Flash player video

  Hello I have a problem with my flash video. When I play the YouTube video and scroll with my mouse wheel, the static part of the video is redrawn with the rest of the site. The dynamic part is rendered correctly. It is difficult to explain in words so please see the photo.

  Does anyone have an idea how to solve this problem? Already tried reinstalling the flash plugin.

  Do not hesitate to ask another info of what you need to know to help me solve this problem.

  Firefox 4 beta uses the Direct2D GPU acceleration, try turning off all: config

  change "mozilla.widget.render" to 0.

• T510 display rendering problem

  No one knows what could cause this problem I encounter. Desktop and laptop computers, the two 1080 p running the same version of vs and the same code renders properly on the laptop. I did a reinstall new from restore disks factory yesterday evening and only install VS.net, Office 2 k 10 and all updates.

  Screenshot of office - http://i.imgur.com/o9epT.png

  Screenshot for laptop - http://i.imgur.com/VeoEh.png

  This would cause none of the improved experience stuff or I have to put in for a warranty repair?

  Well I found what was wrong. Someone thought it would be funny to set the default DPI on the image that accompanies the T510 4313-CTO at 150% Lenovo.

• Rendering problems audio bluetooth Windows 7

  I have an external peripheral stereo Bluetooth (a speaker Auro Blunote) connected to my desktop Windows 7 Home 64 bit over Windows 7 Bluetooth Audio rendering.

  Initially, this connection works well. However, after a few minutes of non-use - Windows 7 seems to be abandoned the connection. If I'm in his-> make of Bluetooth Audio and select Test - there is no sound.
  To temporarily solve the problem, if I disable Windows 7 Bluetooth Rendering, and then select on - when I type TEST - the connection is re-established.
  My question is - why Windows loses connection and what can I do to make it stop.
  Needless to say - my Aura Blunote speaker doesn't have this problem when it is connected to other Bluetooth - my mobile phone, tablet devices, etc.

  Hi Pauliw,

  1. do you get an error message/code?

  2. What is the brand and model of the computer?

  Method 1:

  Apply the hotfix from the link:

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  Method 2:

  Check out the link and follow the steps in the article:

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: Also applies to Windows 7.

  Note: Make sure that your computer has the latest version of the Bluetooth® driver available for your device installed

  Also check out the link:

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-in/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Rendering problems.

  Have recently downloaded a free trial version for after effects (AE) and I've used. I have worked on a project for hours, but when I made half of the stuff in that I put the project were not in the rendering. I used a background image and put the above animated text. When I visited, only the background shows, without the text. And Yes, I have the text and effects for it in the work area. Anyone know what I am doing wrong? Please be nice, I only downloaded AE 1 or 2 days, then maybe I do something wrong really obvious.

  I guessed wrong. This is your problem:

  

  Disable your layers as "Guide Layers" and you'll be fine. layer-> layer guide

  out of curiosity. Why do you check those that guide layers in the first place?

• ADF Image rendering problem.

  Hi all

  I use Jdev 11.1.1.6. I am facing a problem with image rendering. I have a picture on jspx page that contains the behavior of the popup. Inside the pop-up window, I have a search engine (custom search).

  Initially when the page goes for the first time. I can able to see the image, but when I perform a search operation, I'm unable to see the Image (picture).

  According to my observation.

  When the page is displayed for the first time, the URL of the image source is:

  http://www.xyz.com/workflow/Project1UI/faces/images/search-icon.jpg

  After searching the source image is modified to:

  http://www.xyz.com/workflow/Project1UI/faces/pagename/images/search-icon.jpg (name of the page is JSPX page name)

  Code:

  < af:image source = "images/search-icon. JPG"id ="i2">

  "" < af:showPopupBehavior popupId = ': p1 '.

  triggerType = "click on" / >

  < / af:image >

  < af:popup id = "p1" contentDelivery = "immediate".

  autoCancel = "disabled" childCreation = "deferred."

  Binding = "#{NPACreateProjectBean.POP1}" >

  < af:dialog id = "d3" type is 'none' styleClass is "AFStretchWidth" >

  < af:panelGroupLayout id = "pgl17" >

  < af:panelFormLayout id = "pfl10" >

  < af:inputText value = "#{bindings.cnFilter.inputValue} '"

  label = "#{Bindings.cnFilter.hints.label} '"

  required = "#{Bindings.cnFilter.hints.Mandatory} '"

  Columns = "#{Bindings.cnFilter.hints.DisplayWidth} '"

  maximumLength = "#{bindings.cnFilter.hints.precision} '"

  shortDesc = "#{bindings.cnFilter.hints.tooltip} '"

  ID = "it12.

  Binding = "#{NPACreateProjectBean.I1} '"

  rendered = "false" >

  < f: validator binding="#{bindings.cnFilter.validator}"/ >

  < / af:inputText >

  < af:commandButton

  Text = "SearchUsers.

  Disabled = "#{!}" bindings. SearchUsers.enabled}.

  ID = "cb1".

  actionListener = "#{NPACreateProjectBean.onSearch}" / >

  < / af:panelFormLayout >

  < / af:panelGroupLayout >

  < af:spacer width = "10" height = "10" id = "s14" / >

  < / af:dialog >

  < / af:popup >

  Concerning

  Ilhem

  Instead of

  You can try with

  Thank you

• Sound rendering problems

  Hello

  I use AAE CS6 and I have a problem irritating its rendering, rendering a WMV to AVI video.

  I read on the forum, I saw a few responses, seen videos, tutorials, you name it, the problem persists.

  I use 1080 p video captured using a Sony camera. File extension is MTS (AVCHD)

  When I imported AAE only got the video, went googling and came to the conclusing who, for some reason AAEdoesn can't, the MTS extension and to get the sound that I had to change the M2TS extension. Well, I got it done, AAE CS6 had sound this way, but not the image. Then I solved a problem and got another.

  Then, I used paid version of AVS Video Converter to convert MTS files into a file M2TS, rather than change the extension. Problem is always the same.

  So I converted the MTS to a WMV file. In this way, I received the images and sounds. Cool.

  Editing video, zero problems.

  When I got to the part of rendering, renderng in AVI (yes I know I have go the lossless blah blah blah) the result is that my sound seems to have hiccups (parts, mutes, plays, mutes). My PC has 16 GB of RAM, I have a 740 NVidia card, I have all the latest news of the EFA and Nvidia updates. When rendering use of the RAM is arround 30-40%, so a lot of RAM to use still left.

  I decided to install now AAE CC15 trial to test whether it was a problem with CS6 and the problem is always the same.

  What the hell happens with AEF?

  Thank you very much

  Kind regards

  Peter

  FAQ: Why my huge output file, and why didn't he play back smoothly?

  But first, you should have converted your video to something lossless to AE in the first place. CERTAINLY not a WMV.

  Also, why not use Adobe Media Encoder? It would be the best choice. You could do your problematic footage in a QuickTime with the PNG codec. Or hell QuickTime with the Photo-JPEG codec - to quality levels is ALMOST without loss, but it is certainly much better than WMV.