sVMotion between iscsi and fc?

Similar Questions

• Questions about iSCSI and subnets

  IM planning on a deployment of 8 ESX servers connected to an array of iSCSI on double dedicated switches.

  1. 2 cards on each ESX host network is dedicated to iSCSI and VMware dependent ontraffic.
  2. SAN iSCSI target consists of two controllers with 2 uplinks of iscsi on each controller (4 total)
  3. The manufacturer of SAN is suggesting setting up of their SAN ports in separate subnets for higher throughput
  • For the sake of simplicity lets say assign 10.10.100.1 24 ports SAN 1 & 3 and 10.10.200.1 24-port SAN 2 & 4
  • On the side of ESX, a single iSCSI VMKernel address will be 10.10.100.2 and the other will be 10.10.200.2.

  My questions:

  1. do I have to enable trunking VLAN on the side of the switch so that the initiator 10.10.100.2 ESX failover to the port of SAN 10.10.200.1 and vice versa, because they are not in the same subnet and therefore not in the same VLAN?
  2. If this is the case, will trunking VLAN also solve the problem if we were to buy an identical iSCSI SAN on the road and 2 subnets more setup for controllers, but still only have two cards on the ESX Server.
  3. I would assign the 2nd ESX Server in this config with the same IP addresses as the first, or I re them with differnet IPs (but obviously still in the same subnet as the storage arrays), for example ESX 1 is 10.10.100.2 and ESX 2 would be 10.10.100.3

  Any other associated iSCSI I get with VMware, simply not able to think through this particular obsticle and I don't have the equipment to test it yet. Doesn't help that it's late in my part of the world and my brain power is depleting fast!

  Thank you!

  I mean really isolated network. No routing between them.

  Is the software of multiple paths that can pass a path to another, and if you need one network to another.

  Note that the PowerVault will have an interface of a mosquito net and to one another for each processor.

  André

• Difference between 'Reload' and "Reload (Override Cache)"?

  Https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_navigation, what is the difference between 'Reload' and "Reload (Override Cache)"? What makes "ignore cache"?

  Reloading Web pages and cache bypass aims to obtain a new copy of perhaps obsolete or damaged files currently stored in the disk cache.
  You can do it like the first attempt if a normal charging does not seem to provide a version of a Web site or if you are having problems with a Web site otherwise.

  We usually have advice that if you have questions:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.
  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if an extension or theme (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problems.

  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• What happened between Firefox and Roboform? FF no longer mentions RF in its modules!

  What happened between Firefox and Roboform? FF no longer mentions RF in one of its modules.

  I'm having the same problem. RoboForm contacted and they act like they have no idea there is a problem.

• Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

  Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

  You want the solution? Why not tell us what Mac and Apple, mobile devices you have the OS and version?

  Also what troubleshooting steps you took?

  We do not have a crystal ball, and we're not sitting next to you.

• What is the best between Firefox and Aurora?

  What is the best between Firefox and Aurora?

  Hello DarshanK, that depends on what type of user you are probably: https://www.mozilla.org/firefox/channel/

• is there a difference between 38 and 42mm with their pixel density?

  is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

  You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

• What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. Do I have to download these two files in the pictures folder is one duplicate of the other?

  What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. I need to restore these two files in the folder images or one is one duplicate of the other?

  I use a MacBook Air 2013 model with a backup on a WD MyBook Duo disc for storage wireless as the Apple Time Machine.

  The Photos and the iPhoto library are totally separated - neither one is connected to the other somehow--you want to restore the library you need

  LN

• What is the difference between extensions and Plugins and Add-ons?

  I'm sorry if here is not the right place for this post.

  What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

  Kind regards
  Danesh

  Hi Danesh,

  You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

  Hope this helps!

• High CPU consumption (always between 12 and 30%)

  I am running Firefox 9.0.1 for Mac. Until the upgrade to version 9.0.1 I had no use of high CPU problems... I've now must constantly between 12% and 30% of CPU and up to sometimes use much further than that, which really slows down my Mac to a point where I have to kill Firefox to use other applications.

  I have a new Mac mini with fast CPU and 8 GB of RAM.

  I tried to reinstall and also to disable the 4 Add-ons I have installed. After a new installation and all 4 disabled add-ons, I see exactly the same problem even with one tab open to google.com

  Any help from the community is very much appreciated.

  Thanks in advance...

  I've upgraded to Firefox 10 and this issue is now resolved.

• What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

  What is the difference between Firefox and Namoroka 64-bit?
  I have a 64-bit computer. Which should I use?

  The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

  http://www.Mozilla.org/en-us/Firefox/new/

• What is the difference between dawn and the beta?

  What is the difference between dawn and the beta?

  Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

• Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

  Hello

  How can I switch between NVIDIA and INTEL graphics cards?

  PS
  I have already installed all the drivers, but I can see that INTEL the card used chart!

  * OS: Windows 8.1 x 64
  * NVIDIA driver: 340, 52-portable
  * DirectX: 11

  Hello

  The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

  For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
  This setting can be changed in the nVidia control panel s

  Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

  Now in the main window, you will find two global settings and program parameters tabs
  In the program settings tab, select the (game) program that needs to use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  Last but no less, in this program-specific settings, you can assign additional features to improve performance.

• Difference between valuation and putting in good shape?

  What is the difference between recovery and formatting?

  I need to download tools and utilities to perform the recovery?

  Recovery recovery image installation.
  Formatting of removal of content from disk HARD integer.

  No, you don't need any download. All you need is CD/DVD recovery for your laptop model.

  To be honest, your questions are a bit funny. If you want to have accurate on such things information please publish your laptop model and it will be much easier to give you exact explanation and instructions how to use recovery CD/DVDs.

• Qosmio X - 70A - difference between nVidia and driver Toshiba GPU

  Is there a difference between nvidia and one packed by toshiba display driver?
  I'm using the Toshiba but Geforce experience gives me a headache with warnings about a newer driver and toshiba does not appear to provide a.

  Of course there is a difference between the GPU nVidia drivers (or drivers provided by manufacturers of graphics cards) and the drivers provided by Toshiba.

  The Toshiba driver page GPU drivers are changed and made for the mobile use.
  Each laptop model supports various components (CPU, cooling, modules, etc.) and different design. That is why the heat dissipation is always different.

  The GPU driver provided by Toshiba supports a kind of GPU overheating protection and protects the graphics chip of the damage. This means that the GPU performance are controlled by the driver and in case the internal temperature would rise to critical level, it would decrease the performance of the GPU. Also the laptop stops automatically if the temperature is too high.