SwipeDown event is not generated.

Similar Questions

• value of property not generating a signal event node

  I have a sample program that uses a property node > Value (Signaling) to generate an event.  The property looks like this:

  When I create a VI to do the same thing, the property node looks like this:

  I click with the right button on the Boolean control, create, node, value property (Signaling) to create the node.

  My VI does not generate an event when a value of TRUE is passed to the property node.  Is it possible to change the Boolean Data Type?  What is the problem?

  shall12 wrote:

  My VI does not generate an event when a value of TRUE is passed to the property node.  Is it possible to change the Boolean Data Type?  What is the problem?

  If the data type of the property value node does not resemble boolean (i.e. purple instead of green), you must change the mechanical action of the Boolean because it is currently latch action. Change the mechanical action to switch the action and you should be OK.

  Also note that a value property (sgnl) fires the event to change value unconditionally, even if a new value of the former are the same.

  (If you want to be able to raise Boolean lock action events as you describe here, consider a vote for this idea. )

• Allocation of resources to the Department not generating INSERT event in PersonHasQERResource

  Worm of 7.01.

  I have a process on the PersonHasQERResource table. It triggers the INSERT and DELETE events.

  If I assign resources directly to the user the INSERT event I triggered and the process begins. The same happens when I remove the resource (DELETE event). If I assign the resource to a Department all employees get the resource and the PersonHasQERResource table. But the INSERT event is not raised. When I remove the resource from the Department the DELETE event is triggered and the process runs.

  Is there a setting that I forgot so the INSERT event fires on the transfer of resources department?

  Concerning

  Kai

  In Version 7 of the * Total tables have been removed and the default event entitled and remove were added to the tables to transfer.

  Allow your chain of process for these new events. That should do the trick.

  You'll find more in the online documentation.

  http://documents.software.Dell.com/Identity-Manager/7.0.1/Configuration-Guide/one-Identity-Manager-software-architecture/working-with-objects-in-the-one-Identity-Manager

• Asynchronous business event is not raised.

  Hello

  I bought "oracle.apps.per.api.employee.create_employee" business with an asynchronous subscription with phase event = 101. Now every time that I do a rental through self-service or business seminar Test (from the system administrator), the event is fired that they are intended. I am trying to check the following navigation to see the transformed XML data is generated by the business event.

  Navigation is:

  Administrator Web Applications of Workflow > > Oracle Applications Manager > > Workflow Manager > > flow > > activity of agents > > WF_DEFERRED (select this agent to view the XML message).

  The event is considered as are treated. But the funnction which is attached to the business event is not called. The called function inserts data in a custom table. But after that the event is triggered, there is no data in the custom table. As a result that the function has not been treated at all. Is something theye more what can I do to make this work?

  When I am subscribing to the event synchronously with the Phase = 99 that it works correctly.

  helped the business with details of next subscription event.

  -------------------------------------------------------------------------------------

  Triggering event

  Source type: Local

  Event filter: oracle.apps.per.api.employee.create_employee

  Execution condition

  Phase: 101 (when it is asynchronous) / 99 (when synchronous)

  Status: enabled

  Rule data: Message

  Type of action

  Action type: custom

  Error on: stop blocking and cancellation

  Action

  Rule of PL/SQL function: (< package >. < function >)

  Priority: high

  Documentation

  Owner name: human resources

  Tag owner: BY

  As suggested in the event withdrawn but untreated subscription , restart the "Deferred Workflow Agent Listener" service helped in this case. If in the case, someone has the same problem, try to restart the service "Workflow delayed Agent listener" of "System administrator" > Oracle Manager application > Workflow > components of the Service

• not generating the trace for rdf report by oracle apps file

  Hi all
  
  
  in fact, we aim to generate trace file for reports and a convert to text file using tkprof by simultaneous program unix shell script submit using fnd_request.submit_request in another program of concurrent proceedings. but all the reports that are created by using pl/sql generates the trace file, but rdf report does not trace file.
  
  Report generator Oracle 6i is used
  
  Oracle application is 11i
  
  List of measures are being taken to get the trace file are
  1.SRW. USER_EXIT (' FND SRWINIT' "); before the release of report
  2SRW. USER_EXIT ("FND SRWEXIT'"); in after the report
  
  another of the measures which are followed
  SRW.do_sql ("alter session set SQL_TRACE = TRUE'"); before release of the report
  SRW.do_sql ("alter session set SQL_TRACE = FALSE'"); in after the report
  
  above, said steps are done, but still it does not arouse any trace file
  
  same oracle_process is null
  
  Select oracle_process_id from the fnd_concurrent_requests where request_id
  
  ID processOracle for this report oracle rdf file is not generated.
  
  
  Please help me in this issue
  
  Thank you
  
  Published by: 797525 on October 12, 2012 12:43 AM

  Add the following line before the outbreak of report
  SRW. DO_SQL ("alter session set events = tracefile_identifier" trace 10046 name context forever, level 4 "=" REPORT ' ")

  Trace stops automatically when the report closes.

  In addition, what program submits the script fnd_request.submit_request... shell / pl/sql procedure?

  you initialize apps FND_GLOBAL. APPS_INITIALIZE before submit_request of shooting?

  Make a DNF: active Log Debug = Yes and check the table of fnd_log_messages

  See the following MOS docs:
  Oracle 6i [ID 111311.1] follow-up reports
  See you soon,.
  ND
  Use the buttons "useful" or "correct" to award points to the answers.

• Custom cursor - button click event does not

  Hello

  I'm looking to use cursors with AS3.  I created a movie object I position using:

  function mouseMoved(event:MouseEvent) {}

  mousePointer.x = this.mouseX;

  mousePointer.y = this.mouseY;

  }

  and by calling the Mouse.hide)

  It works very well on what the custom cursor follows the mouse, but I'm having some trouble using the events with the cursor.  I have several events click on the several buttons.  Events do not trigger when you use the custom cursor.  In my ignorance, I guess the problem is that the custom cursor movieclip is on the top of the key, and then click events are generated only for her and not the button.

  Is there a way to get around this?  And is it usually possible to ignore the events of a clip for a clip that is below?

  Kind regards

  Robbie your

  Try:

  mousePoiner.mouseEnabled = mousePointer.mouseChildren = false;

• calendar events are not a to do list on my imac

  Calendar of events do not appear to make the list on the page of the calendar on my imac. He used to do this on my pc. When you enter an
  an event, it shows on the calendar, but you will need to enter it again if you want to appear on the to do list.

  I think that these are two different lists.

• Structure of the event does not not at the exit of a Btn dialog box

  Hi all

  I have here a simple VI. I want to blow a One button in the user dialog box. I want VI to wait until the user clicks on the OK"" button. When we click on the OK button the VI should pop another dialogue a button and stops when you press the Ok button. The VI does not stop. The value change event is not captured by the structure of the event. Can't really understand why.

  What OK button you are wanting to trigger structure of the event?

  1. as you have connected it the case of the event is related to the OK INDICATOR on the front panel.  You don't have an OK button on the front panel. The OK button in the dialog box is not easily accessible to the structure of the event.

  2. programmatically change an indicator does not raise an event to change the value.

  3. you can use a Value property node (signaling) to trigger the occurrence.

  4. There is almost always a better way to do what you want to use an indicator and a value (follow the signs).

  Lynn

• CANalyzer OnInit event are not accessible

  I can access the methods of the com objects, but I can't use the events (can not see them). Anyone know why?

  I need to access the OnInit event.

  

  

  It works very well. Thanks for the help

• value chain control event does not trigger change

  Hello

  I am trying to scan a barcode with a barcode usb HID scanner. I use a structure of the event to detect the change in the value of a control of the chain. When I scan the barcode, the chain control updates on the front panel, but the event does not fire until I left on my mouse on the front panel. can someone help? See attached vi

  Your barcodes are probably fixed length. When you get an event, check the length. If it corresponds to the length of the barcode, then process the data, otherwise wait for more characters.  This can be treated very quickly in the case of the event.

  Lynn

• UserChanged event does not run

  Why the event UserChanged without executing when the user is changed with the IEngine.CurrentUser property in an operator interface?  I noticed that it will run when the connect/disconnect methods occur, but not when it is modified directly.

  Also, is it possible to force this event programmatically, so runs the code in the callback associated with this event (such as a work-around?).

  Thank you

  Paul

  TS 4.0.1

  LV 8.5.1

  Paul,

  for the event to not be fired because IEngine.CurrentUser is a property of the engine and the event is controlled by the Application Manager. Therefore, changing the value of the property does not create the event on its own.

  If you work in a user interface, it is recommended to use the Manager commands; the application Manager provides a method of "Login":

  Connects the user by running the front-end reminder LoginLogout. This method does not wait for the callback to run. Use the ApplicationMgr.UserChanged event to determine whether the connection was successful.

  The downside is that the front-end LoginLogout creates the default value of connection dialogby. If you do not want to have this dialogue, you should consider to replace with your own front end. But please do not change the default reminder, but substitute using the directory of users!

  hope this helps,

  Norbert

• Cancel the registration of events does not not to change value

  Cancel the registration of events does not seem to prevent the change in value of firing event.

  I've attached an example of change that disables the mouse enter and exit events to include the value Change event.

  Document ID 4ATCBP1U

  http://digital.NI.com/public.nsf/allkb/E3E5E1B3021D8EFA8625730A0062F52D

  You use the standard event, not the dynamic one (note that the Boolean value does not have the <> ).

• Try to activate Windows XP, but it does not generate an installation ID to activate it?

  Hello
  I'm trying to legitimately re - install XP pro on a build machine that is free because of various programs such as IE and AVG works don't not after a period not being don't not under tension.
  I deleted the partition via the disc to install and re-installed, but then the activation it would not go online so I'll have to do the option "Activate Windows by phone".
  Unfortunately, it does not generate an installation ID and so I can't enter a confirmation ID.
  Of course the help line have been extremely useful and intuitive, and so I wore the recommended feeding cycle, but nothing helped.
  I also tried to change the product key but it's the same. Just a space where the installation ID should be.
  Any ideas would be most appreciated.
  Thank you
  John

  original title: no installation id

  Here are the appropriate measures on how to solve this problem:

  (1) download windows xp service pack 3 from a work computer and save it on a USB flash drive

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  (2) start the computer xp in "SafeMode only.

  (3) install the SP3 that you saved on the usb to the computer flash drive

  (4) restart the computer in "normal mode" and now you have an installation ID

• Vista is not generate video thumbnails

  Vista is not generate thumbnails for one of my new video files.  The oldest are very good, but something new (mpeg, flv, avi, no matter) just takes the form of icon.

  Hi omegaangel,.

  Thanks for posting on the Forum of answers.

  As a general rule, Windows Media Player should be able to play the format and the correct codec to form the tile.

  You can check that you have the right codecs for movies in Media Player.
  Here's a thread that processes the download of codecs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/a3a097c9-7a80-4de2-9466-9a45eabcb98c

  Give that a try and let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why sometimes Eclipse do not generate alx file and cod?

  Hello everyone, I have a strange question, sometimes, when I'm programming and to run my applications in the Simulator, everything seems fine, but sometimes after making some changes in my source (add new classes) and running againg the application simply don't change absolutely nothing, I saw my files and I have notice that when this happens because the alx file and cod are not generated by eclipse why this, happen is because of the way of programming?

  Thanks for your time!

  See the link below:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/796557/800738/800901/...

  And also check out the link in my signature for some basic tips on the installation program.