Switch between integrated and discrete graphics on alienware 14

Similar Questions

• Switch between integrated and dedicated graphics

  I have a XPS 17 (L702X) and I wonder if there is any way to switch between the dedicated Nvidia Geforce GT555M graphics card integrated into the processor. I ask this because I rarely use it for games and so on and I need to have a little more battery. Given that he uses all the time the NVidia it drain the battery.

  To quote that I have i7 2670 QM and after doing some research, he has integrated graphics.

  Thanks in advance for your help

  The model 3D with a chip nVidia wired permanently - you can not turn it off.  The GPU from Intel is disabled permanently on this model at the hardware level.

• T510 4313CTO 3100 M Nvidia cannot switch from integrated and discrete?

  T510 4313CTO Nvidia3100M cannot switch between integrated and discrete?

  I only have the Nvidia card on my T510. I didn't know you could have both. When I ordered, it was one or the other. ???

• Integrated vs. discrete graphics-> processors

  Hello world

  I am looking to buy a new computer workstation E30, and I am a little uncertain on which I should choose between integrated and discrete graphics. I understand it, in effect, what the differences are and I would go with discrete graphics, but I'm confused by why each option comes with a different set of processors to choose. For example, if I choose an E30 with integrated graphics card, I can choose a range of Intel Core Xeon processors, but if I choose to go with discrete graphics, I can only select one among a range of different Xeon processors.

  Originally, I had planned to go with the Intel Core i7-2600 with the graphics card NVIDIA Quadro 600 processor, but this combination is available only if I select the integrated graphics card, I read is generally worse than discrete graphics. I am happy to go with discrete graphics, but I'm not sure how the Xeon processors compare with the Core i7-2600.

  If I intend to use my computer for CAD programs running, but also of the games, should which way I go?

  The new Integrated GPU exists on the same chipset as the CPU. The new i3, i5 and i7 processor all have an integrated onboard gpu. Some of the Xeon processors used in the E30 does not have an integrated gpu, that's why only some Xeon processors are the choice when you choose the option only discrete.

  The integrated gpu + discreet graphics card option is really a direct influence on performance, since only the discreet graphics card will be used.

  Xeon processors are processors designed for servers, workstations, etc., that are held permanently the large memory and cpu intensive operations. The supply of RAM ECC on the Xeon also reduces the error rate when used with these processes.

  If you try to run games, Quadro 600 isn't really all that good, you're better with a game cards, who may have some compatibility issues in the E30. In addition, 280 watt on the E30 power will not support a lot of graphics card. Also according to CAD programs, then you can get away with using a standard of play rather class graphics card workstation cards. that is, many Autodesk products can work with playing cards.

  I think you should probably look to build your own office rather than buying an E30, if you also want to play games. If you have the money, then you can get S20, D20, C20x, which are better suited to the range of uses you have in mind.

  PS ThinkStation S20 does not have provision for Integrated GPU, therefore, it cannot be bought with the discreet graphics card and it does not support the i3, i5, i7 cpu of the class.

• Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

  Hello

  How can I switch between NVIDIA and INTEL graphics cards?

  PS
  I have already installed all the drivers, but I can see that INTEL the card used chart!

  * OS: Windows 8.1 x 64
  * NVIDIA driver: 340, 52-portable
  * DirectX: 11

  Hello

  The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

  For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
  This setting can be changed in the nVidia control panel s

  Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

  Now in the main window, you will find two global settings and program parameters tabs
  In the program settings tab, select the (game) program that needs to use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  Last but no less, in this program-specific settings, you can assign additional features to improve performance.

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• (Vista) Is there a PRACTICE way to switch between speakers and analog headset?

  (Vista) Is there a PRACTICE way to switch between speakers and analog headset? Must I ALWAYS return the default setting, depending on which audio output device I want to use?

  We have recently installed Music Maker 16.  Before that, we never had a need for headphones and a microphone.  Now, in trying to use the headphone and microphone - and THEN switch back to speakers - we discover a problem.  Apparently, the only way to do it is to change the audio output device by default EVERY time.

  The dispute with this cannot be more of this.  My son records a beat and singing (with headphone and microphone), and then, play through speakers (so we can all hear), we need to change the default settings.  And back...  There must be a better way!

  Any help would be greatly appreciated.  Please talk layman jargon; I'm not a COMPUTER guru.  Thank you!!!

  Hi AnnieElle,

  You will need to switch between the speakers and the analog device and special value to use as the default device. There is no way to set the device to be used at the same time. You can follow the steps below to switch between the speaker and analog device.

  1. right click on the speaker icon in the taskbar.

  2. click on the playback device.

  3. Select speakers or analog device.

  4. right-click on it and click on set as default device.

  Hope the above information helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Switch between files and change the window using f8 - Dreamweaver CS 6

  In Dreamweaver CS 2, I could switch between files and windows edition with the f8 key. Dreamweaver CS 6, this doesn't seem to work. Is there a way I can put it so that I can switch between the 2 windows with a keyboard shortcut?

  Hello stilley,.

  I'm now working with DW CC, so I can only show you how to work with it, but I'm sure it's the same way:

  In my German DW:

  Bearbeiten > Tastaturbefehle > screenshot > files > Kurzbefehle +-taste press > change > Ok.

  Translated something like:

  Edition > keyboard shortcuts > screenshot

  

  > Files > shortcuts + - press > edit > Ok.

  Good luck!

  Hans-Günter

• Why Firefox will allow me to have several tabs, but not allow me to switch between tabs and can only watch a new tab when closing the previous?

  Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Satellite A500-19N - Wlan switch between on and OFF in battery mode

  Hallo,

  I bought a new A500-19N Satellite three days ago and one have the problem,
  When I used the laptop battery, the wlan switch mode between connect and disconnect.
  With powersupplier, I have no problem.

  All energy wlan settings I adjusted to full performance and now I have now idea how can I solve the problem.
  Do you have any ideas or advice?

  Thank you very much
  Nico

  Hello

  You must verify power WLan settings in Win 7 power management and need to disable the power save for WLan in battery mode

  I found a great HowTo but for Vista OS.
  But the settings are not really different.

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  Welcome them

• switch between log and linear waveform graph

  I have a waveform graph that plots linearly. However, it causes an error during the logarithmic line tracing. Is anyway to create a switch that allows me to change between log and linear plot without creating additional graph?

  Thank you

  Chris

  Use a property node: Y Scale.Mapping Mode.  Written 1 to the node passes in logarithmic mode and 0 is for the linear.

  Lynn

• Design of switching between Nexus7K and active / standby firewall

  In the attached diagram, Nexus7K is used in two ways: on the left side, pair NX7K connects to the firewall as layer 2 trunks. vPC VLAN are shared through resources. The firewall is a pair in Active mode / standby. On the right side, another pair of NX7K connects to the firewall as layer 3 rotued links. HSRP or VRRP is running between the pair of NX7K for firewall VLAN SVI.

  Because even NX7K have mesh connections to the active firewall units / standby, I want to make sure in failover scenarios (failover firewalls or failures of NX7K), the link that remains between the pair of NX7K and the firewall can actually send traffic (not perforated black).

  Failure scenarios I can think of include: Firewall active failover on the eve, failure of the main device NX7K, double NX7K active and failure of peers-link NX7K vPC. I would like to get some advice on what I should consider and implement in these scenarios to achieve high availability.

  Many thanks for any advice.

  Hello

  your topology, I see that the main problem is that the physical connectivity from the firewall to the pair of devices nexus in topologies to fails to a redundant link to the N7K

  first since you're using vPC with one counterpart vPC linking the pair of N7K then you must follow the recommendations of Cisco firewalls of L2 and L3 link connection

  L2 if you pass vPC vlan on the trunk in your topology and firewall then there is a possibility of blocking traffic or drop cases underwritten by vPC loop prevention mechanism in the case for example a vPC counterpart link gose down

  the fix to the East either:

  use no-vPC VLAN and link to switch separate inter for VLANs (i thin that you already have this link)

  or multi home L2 connects each firewall for the two switch N7K and assuming that HSRP is configured in the N7K and static routing is used between the firewall and the N7K

  for links to L3 Firewalls:

  You must stream as well (if possible and recommend) and use a static routing between N7K and firewalls and firewalls must point to the VIP of HSRP N7K

  multiple L3 and L3 dyanaminc routing peering on the link of the vPC-peer is not supported design

  Look at the discussion that might help as well

  https://supportforums.Cisco.com/message/3792466#3792466

  hope this helps

  If useful rates