Similar Questions

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• < af:fileDownloadActionListener > does not work until the full download

  Hello

  I use JDeveloper 11.1.1.6.

  My scenario is that I'm downloading files using < af:fileDownloadActionListiner > it works fine.

  But if I try to download more than 30 MB of documents it takes so much time between the two I am not able to work on the page. Example I am not able to navigate in any other page & unable to sign out.

  My codes like:

  < af:commandLink id = "downId" text = "Download" shortDesc = "Click to download" partialSubmit = "true" >

  < af:fileDownloadActionListener method = file name "DownloadAction" = "#{bindings." Filename.inputValue}"/ >

  < / af:commandLink >

  Thank you...

  Well, the component does not asynchronous. You must wait until the data is fully downloaded. If your bandwidth is low, this can take some time.

  Timo

  Post edited by: TimoHahn
  However, you can limit the size, a user can download.

• Do not run formula until the full input cells

  Hello ladies and gentlemen

  I'm not a user of regular broadcast sheet, there must be a good few years since I changed the numbers you use...

  But I plug just your new car and I wanted a spreadsheet for just about track mileage and fuel MPG etc.

  Self created one and it works very well in my goals.

  I copied the formulas in cells, but the lines that have not been provided for future end of refuelling upward with being supplemented with nonsense

  How can I avoid the form "in cell formulas' filling the cells up to that there are entries in the column of the figure of supply?

  Perhaps easier if I show a picture

  Yellow cells I get my numbers

  Green cells contain formulas.

  How can I stop the numbers filling in the Green columns until I enter numbers in the yellow?

  As you see, the-9800 the ones and zeros of formula errors

  I did some research... but no idea what word I'm looking for able to conduct a successful search. Tried such research than the job title and multiple similar on the same theme... but all from a blank test.

  Here is the worksheet that I created:

  http://paisnel.co.UK/upload/KIA.numbers

  Thank you

  

  Hi Neil,

  This approach is to test your yellow column to see if it has a value. Len() will be taken into account the characters in a cell.

  C3 = IF (LEN (B3) "> 0, B3−B2," "")

  This formula will test a B3 value and if there is one subtract it from B2. If there is no value it returns "" which resembles a cell empty.

  If B is always going to be a numeric value, you could simplify the test:

  IF(B3>0,B3-B2,"")

  Quinn

• automatically optimize for costs of life battery batt to 100% within the parameters of the power manager

  In the settings of my ThinkPad Power Manager W530, I chose the option "automatically optimize for life battery" (battery-> maintenance-> Mode of Charge of the battery). Nevertheless, he always fresh and keeps the battery at 100%. Is it normal for a battery 9 cells?

  Link to photo

  But many articles and discussions here at the forum State, actually in charge at 100% is not tor good battery life (see for example this article http://forums.lenovo.com/t5/Welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life-ThinkPad/ta-... ). Do not miss anything?

  Thank you!

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  No matter how many charge cycles the battery on it, just the time where you change the batteries maintenance mode. If you have configured to maximize battery life, the battery may charge at a lower percentage (somewhere around 90%, more or less a few percentage points), but will show this figure as "integral" or 100% for the system. If you change the mode to load completely, then the maximum capacity will change to read the actual capacity of the battery.

  The only way your situation would be a concern if, after setting the battery in order to maximize the battery life, then using the system on battery and load up once again, the battery always charged up to the full 94 w/h instead of reducing the number.

• Aspire Switch SW5-012 10 W8.1 I'm unable to change the size of the on-screen keyboard.

  On my new Aspire Switch SW5-012 10 with Windows 8.1, I am unable to change the size of the on-screen keyboard. Microsoft can't help and refers to the Acer support.

  Is there a solution to this?

  There is no way to resize it.

• Benutzerhandbuch zu "Aspire Switch SW5-01 10

  Hallo zusammen!

  ICH habe mir das 'Aspire Switch SW5 - 012 zugelegt 10. Leider konnte ich im kein Benutzerhandbuch zum downloaden find Support? There're keins?

  Viele Grüße von LUN - Re

  Hallo LUN - Re,

  meinst das yesterday? Hello from einen nicht found, weil es unter Notebooks on the ist site:

  

  Gruss

  Jochen

• Satellite battery click on Mini L9W - B keyboard will not charge

  My keyboard battery will not charge, I left it loads for more than 24 hours after the battery 1 reached 100%.

  I checked the version of the bios that is 1.70. I read the other posts on this particular issue but unfortunately nothing works for me.

  It shows the symbol of charge on battery 2, but it did not go above 0%. If I turn on the battery runs immediately battery 1.

  Please advise me on this point because otherwise I will have to return my satellite click mini. Thanks in advance

  You completely turned the device off?

  Do... Press and hold the power button / stop until the device turns off.
  In addition, you can stop the unit pressing and holding the key SHIFT and then choose SHUT OFF

  Then check the connection between the keyboard and Tablet docker... possibly disconnect and connect again.
  Once the unit turns on again and check the battery State of charge connection adapter to the device.

• Satellite P10 switch randomly between battery and AC

  I have a satellite P10 who had some problems of strange power for about a year now.

  My laptop switch to the power of the battery even when it is plugged. I will then either use the computer until the battery runs out and turned it off or Hibernate in until the battery may charge.

  I thought that I had fixed by downloading and installing a new Bios from the toshiba site, which seemed to work for a while, but now it the problem seems to have returned.

  I also bought a new battery and the bar of power, thinking that was the problem... but it does not solve the problem.

  Someone else out there with similar problems, or a method to solve this?
  any thoughts would be great.

  Hi man,

  I had similar problems with my machine, so you can check some things:

  -When the CA is connected, then move him soft in all directions, there are maybe a few micro cracks on the AC connector.
  -try to boot your machine without the battery, your motherboard charging system is may be defective
  -Discover an another AC adapter, maybe the CA is defective

  If you encounter some strange phenomena as power cuts or no charge while you perform this action above, then you have definitely a hardware problem and you will need to contact your local dealer or the service partner for the other instance.

  So I had to do, and it's a faulty motherboard.

  Hope I could give you some ideas.

  Welcome them

• MSDS for battery PRAM mac mini

  Hello

  I'm trying to find the signage plug for battery of mac mini.

  So far, the technical background paper only I found online is the following:

  http://images.Apple.com/legal/more-resources/docs/Apple-product-information-Shee t.pdf

  It seems that the mac mini is the only Apple product are not not in the document.

  Apple is there an explanation for that?

  Is there a way to find this information online?

  Thank you

  E.

  Use of Apple a BR2032 which is similar to the CR 2032 and the CR can be used but has a shorter life.

  MSDS for BR2032

  http://www.datasheetarchive.com/BR2032%20MSDS-datasheet.html

• 'Acer Hover access' auf Acer Switch SW5 - 012G HD 10?

  Hallo,

  Since some days besitze ich das Acer 10 HD Switch SW5 - 012 G, also das mit Switch 10 HD Sim maps Modul.

  Auf dem ist das Programm "Acer Hover access" Acer Tablet one für die eines Acer Active pens use. Nach meiner search kann man den Pen assets is nur bei Full HD devices use. Ist das richtig?

  Warum ist das Programm dann auf meinem "nur" HD Gerät one?

  olsch

  Moinsen olsch,

  die question warum wird man dir wohl nicht abgegeben können, aber als Logische Lösung ointment, bleibt die nur ja assumption das das Preload which auf den Geräten ist nicht vom display dependent gemacht wird.

  ICH kenne're EIB DVD oder Blueray drive assemblies. Da hat man don't andere Software Ausstattung.

  ICH vermute das bei den HD, FHD Hat bad displays keiner noticed, das sleeps sharp software is ist.

  Hilft dir zwar nicht really, aber dies konnte deine question abgegeben.

  MFG

  Cyriix

• Data connection lost until the traction battery on

  I'm working on a program with the http call, we sometimes find that the device loses the data until the reset the battery connection. This happens only once in several days, but it happens again and again. This only happens on 8830 and 8330, it never happened on 9530 or other newer devices. It looks like so there is a question about the RIM OS.

  My question is, do we have any solution to work around him. (someone said that we should avoid parallel http calls, is it true?)

  I did a search on the forum, I found that some thread also referred to same issue:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=37249&query.ID=608157...

  It's happened a lot with me on 8830. I can reproduce the problem whenever I want. If I have several successive http requests by using a direct TCP connection the problem happens. I also noticed that it happens on 8830 with OS 4.2.x. He can't get on 9530. My explanation of what it could be a bug somewhere in the old version of the OS.

  My job is to use MDS all the time. That seems to fix the problem. But the connection still from time to time expires. (better than to take out the battery).

  Rab

• Satellite battery drain click Mini L9W - B

  Hi all

  Since the 1.70 BIOS update I noticed a couple battery draining.
  I left the unit with the lid closed for 12 hours and the battery charge has dropped from 20% to 3% only.
  I also noticed the two batteries give max 5-6 hours compared to what has been 10 to 12.

  If anyone else has noticed this?

  Thank you

  I left the unit with the lid closed for 12 hours

  Cover does not mean that the unit is turned off completely.
  If you turn the power off, you will need to perform a full stop as described in this paper to Toshiba.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• C50-A-1DN satellite: black screen until the battery has been removed

  The battery of my laptop Satellite C50-A-1DN was defective despite attentive treatment after more than a year.

  Now the screen remained black at the beginning of the unit.
  After that I removed the battery, I could see the computer then power up as usual.

  How is that?

  Well, this question seems a bit strange because even if the battery couldn't keep cooler, the laptop should be able to power being plugged into the mains.

  I'm not quite sure that the problem is related to the battery...

  However, the battery is a removable part and very cheap... so in all first the battery should be replaced and laptop computer features must be tested using the new good farm work.

  If the problem of the laptop will not be resolved even by using the new battery, well in this case there must be a serious problem with the motherboard... maybe power electronic problems...

• Cloud membership: do I have to wait until the year is to switch plans or it is possible at any time?

  I asked a question, a week or two ago on the different monthly subscriptions and the possibility to pass from one to the other.  My original question was if I was on the full package of $49.95 per month and he decided that I have not all demand I could spend the development plan of $19.95.  I understand that I could not until the year is up on the plan.  My next quest and I'm sorry I didn't ask this with right thread original, is if sign up for just the Illustrator application from $19.95 per month will have to wait a year to get up to the full monthly plan or which can be done at any time?

  My original question was if I was on the full package of $49.95 per month and he decided that I have not all demand I could spend the development plan of $19.95.  I understand that I could not until the year is up on the plan.

  No need to wait until the year is upward. You can contact Adobe at any time to change the regime.

  TR6speed wrote:

  My next quest and I'm sorry I didn't ask this with right thread original, is if sign up for just the Illustrator application from $19.95 per month will have to wait a year to get up to the full monthly plan or which can be done at any time?

  Can be done at any time.