Switch user account logs off immediately

Similar Questions

• My iMac freezes during a turn on and between two switching user accounts

  My 2011 iMac has been crashing for weeks. Usually, it freezes when I turn it on, connect to switching user accounts or user accounts.

  I upgraded to Sierra yesterday and I continued using for hours and it was fine.

  I turned on today; some of the Apple applications do not work... Mail, App Store, Safari (this is what I tried). Responsible mail application, saw a list of emails, but when I click on a particular message, the message will not load. Safari cannot load a Web page at all (I'm now using Chrome). AppStore cannot load anything too.

  I asked for help here before the crash but I was reluctant to share the report of being. Now, I've read about it and understand how it works. The report says "failed".

  Appreciate the help of the community. Thank you.

  Here's the report...

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-02 18:24:53

  Download EtreCheck from https://etrecheck.com

  Duration 03:11

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer restarts

  Description:

  Crashes when you turn on the machine, or signature accounts switching. It is slow since updated for Sierra. Safari and Mail does not. Safari cannot load pages (Chrome works); See the list of the mails but when click on a particular message, Mail does not load the message.

  Hardware Information: ⓘ

  iMac (27 inch, mid 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6970M - VRAM: 2048 MB

  iMac 2560 x 1440

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour

  Disc information: ⓘ

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Mac HD (disk0s2) / [Startup]: 999,35 go-go (674,19 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-STDVDRW GA32N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 8 tasks of Apple

  [loading] Apple 171 jobs

  tasks of Apple 92 [performance]

  Launch system demons: ⓘ

  [no charge] 39 tasks of Apple

  [loading] Apple 165 jobs

  [running] Apple 99 jobs

  Launch officers: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-13) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loaded] com.teamviewer.teamviewer.plist (2015-03-02) [Support]

  [loaded] com.teamviewer.teamviewer_desktop.plist (2015-03-02) [Support]

  com.Trusteer.rapport.rapportd.plist [running] (2016-09-18) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.teamviewer.Helper.plist (2015-03-02) [Support]

  [loaded] com.teamviewer.teamviewer_service.plist (2015-03-02) [Support]

  com.Trusteer.rooks.rooksd.plist [running] (2016-09-18) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2014-05-09) [Support]

  com.apple.CSConfigDotMacCert [not] -[...] @me.com - SharedServices.Agent.plist (2014-04-05)

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2016-09-24) [Support]

  com.spotify.webhelper.plist [running] (2016-10-02) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  Request for WDSecurityHelper (Security.app/Contents/WDSecurityHelper.app/Applications/WD)

  Spotify application (/ Applications/Spotify.app)

  Dropbox application (/ Applications/Dropbox.app)

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-04) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-14) [Support]

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-01) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-14) [Support]

  PepperFlashPlayer: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  NP_2020Player_IKEA: 5.0.94.1 - SDK 10.6 (2012-09-28) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-04) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2014-04-05)

  RL Secure Layer plugin: Unknown - SDK 10.5 (2014-02-21) [Support]

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

  Picasa: 1.0 - SDK 10.6 (2014-03-05) [Support]

  UploadManager: Unknown - SDK 10.5 (2015-01-05) [Support]

  ContentManager: Unknown - SDK 10.5 (2015-01-05) [Support]

  RocketEngine: Unknown - SDK 10.5 (2015-01-05) [Support]

  Safari extensions: ⓘ

  1 - ClickWeather - TWCi - http://www.weather.com/ (2014-09-20)

  DuckDuckGo - DuckDuckGo - http://duckduckgo.com (2015-07-11)

  3rd party preference panes: ⓘ

  Flash Player (2016-08-29) [Support]

  Trusteer Endpoint Protection (2016-09-20) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Mac HD: Disc size: 999,35 GB disc used: 325,16 GB

  Destinations:

  SUZ_500G [Local]

  Total size: 499,76 GB

  Total number of backups: 81

  An older backup: 2015-07-07 at 17:41

  Last backup: 2016-09-15, 16:48

  Backup disk size: too small

  499,76 GB backup size < (disc 325,16 GB X 3)

  Top of page process CPU: ⓘ

  photoanalysisd of 209%

  4% mdworker (18)

  3% photolibraryd

  3% coreaudiod

  3% WindowServer

  Top of page process of memory: ⓘ

  Kernel_task 845 MB

  786 MB Google Chrome Helper (5)

  528 MB mdworker (18)

  Finder 283 MB

  Photoanalysisd 258 MB

  Virtual memory information: ⓘ

  3.25 GB of free RAM

  8.74 GB used RAM (4.43 GB being cached)

  362 MB used Swap

  Diagnostic information: ⓘ

  October 2, 2016, 18:21:58 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-182158_ [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  October 2, 2016, 17:43:42 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-174342_ [redacted] .crash

  October 2, 2016, 17:34:33 self-test - spent

  October 2, 2016, 17:20:02 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-172002_ [redacted] .crash

  October 2, 2016, 17:19:17 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-171917_ [redacted] .crash

  October 2, 2016, 16:55:42 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-165542_ [redacted] .crash

  October 2, 2016, 16:54:41 [redacted] ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-165441_ .crash

  October 2, 2016, 16:51:15 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-165115_ [redacted] .crash

  October 2, 2016, 16:51:14 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-165114_ [redacted] .crash

  October 2, 2016, 12:26:52 AM /Library/Logs/DiagnosticReports/Safari_2016-10-02-002652_[redacted].cpu_resourc e.diag [details]

  /Applications/Safari.app/Contents/MacOS/Safari

  October 2, 2016, 12:11:33 [redacted] AM/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-02-001133_.cpu_resource.diag [details]

  October 1, 2016, 23:49:15 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-01-234915_ [redacted].cpu_resource.diag [details]

  October 1, 2016, 23:18:28 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-01-231828_ [redacted].cpu_resource.diag [details]

  October 1, 2016, 21:23 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-01-212300_ [redacted].cpu_resource.diag [details]

  October 1, 2016, 21:01:11 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-10-01-210111_ [redacted].cpu_resource.diag [details]

  October 1, 2016, 21:00:51 /Library/Logs/DiagnosticReports/Safari_2016-10-01-210051_[redacted].cpu_resourc e.diag [details]

  October 1, 2016, 20:11:06 ~/Library/Logs/DiagnosticReports/Safari_2016-10-01-201106_[redacted].crash

  October 1, 2016, 19:35 ~/Library/Logs/DiagnosticReports/WeatherEye_2016-10-01-193500_[redacted].crash

  /Applications/weathereye.app/Contents/MacOS/weathereye

  Trusteer Endpoint Protection (2016-09-20) [Support]

  The following may be useful: https://www.trusteer.com/support/uninstalling-rapport-mac-os-x

  It is slow since updated for Sierra.

  A part of which is related to the upgraded Photos app. If you have lots of photos (in thousands), it will take a lot of time for it reach to analyze your photo library. The best thing to do is to let him finish, as long as it could be. 1 hour per 1000 photographs as a rough estimate. When it is finally over, the performance of your Mac will be back to normal.

  Definitely get rid of "Trusteer" however. As a needless "anti-virus" garbage is still installed on your Mac, it is unreasonable to expect it to work the way it was designed to work. Safari won't work. Mail will not work. A lot of other things that you really need to work just won't work. Please read of effective defenses against software malware and other threats.

  DuckDuckGo - DuckDuckGo - http://duckduckgo.com (2015-07-11)

  You don't need the Extension Safari DDG, since DDG has been integrated natively in Safari for some time. Select the Safari menu > Preferences > Search and select the dropdown Search engine DuckDuckGo . Then, select Extensions, select the extension DuckDuckGo and Uninstall.

  Leaving the current Extension is OK but it does nothing.

  Request for WDSecurityHelper (Security.app/Contents/WDSecurityHelper.app/Applications/WD)

  I don't know what it is. If you do not either, get rid of it. At least delete your login items.

• the mouse freeze when I switch user or log out

  Several users on our domain are complaining that after they log off or switch to a new user of the mouse becomes disabled and centres of the arrow of the mouse in the middle of the screen. They must then restart either the machine using the power button or by unplugging and then plugging in the mouse.

  my PC is Dell Optiplex 790
  Windows 7 Enterprise 32 x
  need your help quicklyyyyyyyyyyyyyyyyyy pleaseeeeeeeeeeeeeeeeeee

  Hi Tadros

  Thanks for posting your question in the community of Microsoft Windows.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend to post your question in the below link:

  Windows Server forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Cannot switch user accounts

  I have two user accounts on my Windows Vista Home Premium system. Both have been implemented as administrators, but one account was changed to the user 'Standard '. Once this change has been made I could no more switch users or make other changes to the users. Given that the current account is only a Standard user, it can only perform basic functions so I can't try to restore the system before the change. If I try to change the only guest user I give is of the ASP.NET Admin account asking for a password that I don't have. Via Explore, I can see users, but cannot access that I see the guest of ASP.NET.  How can I pass on my admin account?

  Sign out and then sign in to the account Admin Steve Winograd, Microsoft MVP (Windows desktop experience)

• How to keep Num Cap on between switching user accounts?

  Sometimes when I go from administrator user account, the NUMLOCK is turned off automatically, I like to keep all the TIME.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Oem7110

  Take a look at this http://www.petri.com/change_numlock_default_state.htm

• I forgot my user account log the password for windows 7

  I forgot my log of user account password for windows 7 I use the fingerprint option to open a session if did not use the option of password for the age is there a way to reset it

  In fact, you want to do much more, especially the following:

  • Create and test a second admin account, and then save its details.
  • Create a password reset disk. Click Start, click Help, and then search for help on "reset disk".

  Here's how you can reset your password.
  1. open a session.
  2. click on start.
  3. type the three letters cmd in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET user "user %%nom" 123456
  This command will set your password to 123456.

• How to set up a user account (log in) 'Guest' on Windows 8?

  Other versions of Windows, I was able put different user accounts.  I would like to have "invited" use a different newspaper account and do not have access to my confidential passwords and files.

  I tried to implement a different user account, by using the 'Help' to win 8 but it does not appear in the log in page.  The only visible account is mine and when I go into the PC settings, there is an account listed as "invited".  I am completely baffled and frustrated at this point.  Any help on this would be greatly appreciated.

  Thank you

  Hello

  We will try the following troubleshooting steps and check if they help you create a guest user account.

  a. press the Windows key(start screen will popup), type the user account, click settings
  b. click on user accounts, click on Manage another account
  c. click guest, click on Open the
  d. logout the current user, sign in using the Guest user.

  Also check out this link:

  http://Windows.Microsoft.com/en-us/Windows-8/user-accounts-frequently-asked-questions

  Hope that the information provided is useful. If you have any other questions, answer here and we will be happy to help you.

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Problem with user accounts

  I'll put up three new Lenovo 3000 N200 laptop for three employees and have problems with user accounts in XP Pro. When I go into the initial Setup, I enter the name of the employee, and it is configured as a user account. When I start the laptop, she prays for before administrator password XP will start. Start XP, I am not able to change to a different user account, when I select Logoff on the start menu, I have one is not given an option to switch users. When I go to user accounts in Control Panel, I see the user account that was created, I can change the name & photo, but I can't delete it. I can create a new account with a different name, but she plays the same thing. The administrator remains visible - it is supposed to be hidden if there is another account. It's like XP does not see other user accounts. I am at a loss to know what to do. These are new machines and all three act in the same way.

  Help please!

  I think I solved my problem - on the user accounts page there is a link "change the way user accounts log on or off. When I clicked on it I got a message saying settings could not be changed due to a layout in offline mode. When I changed this setting, I was able to select the types of user switching, and my other user accounts became available.

• What should I do to change my domain user account

  I have xp, normally I had regular user accounts, logging was no big deal.somehow my boyfriend arrived and decided to change God knows what, but it has something to do with the 'networking' of a 'domain' and 'workgroup'.so now all that appears when you turn on the computer is a box asking password, there are accounts of users and no longer fast switching.sometimes now evil try to do something and a box that goes up says that he cant acess or perfom measures due to the restrictions on the computer.i went to "services" in the computer management but that just confused me more.

  Hello

  Welcome to the Microsoft Answers site.
  Reach
  • Beginning
  • Control Panel
  • Double-click the network connection
  • Right-click on local area network
  • Click on properties
  Under this connection uses the following items

  their must be

  • Microsoft network client
  • files and printers sharing Microsoft network
  • Internet Protocol (TCP/IP)

  instead of other items above mention

  a click on it, then press Uninstall

  It will ask you to restart

  Restart the computer

  If you able to connect witout and previous problem

  then the problem is solved

  On the other

  Follow the same steps and see other items still exists.

  If Yes

  uninstall the components.

• Error message: "cannot run from limited user account" using flight simultor 2004

  Original title: have been using flight simultor 2004 for several years, all of a sudden FS9 does not start. Windows XP - e

  use for several years, that all of a sudden FS9 does not start. error message says cannot run a restricted user account, log in as an administrator, but I am administrator and we tried to switch users without result. -any ideas please? Windows xp

  Hi Sethshaw,

  1. did you of recent changes on the system?

  You can create a new user account and check if the game works.

  How to create and configure user accounts in Windows XP

  If you are not faced with the question, you can visit the following link to resolve the damaged user account.

  How to recover damaged Windows XP user profile

  Hope this information is useful.

• User account in W7 problem

  I have 2 settings of user accounts: Admin and Standard in Win7/Pro.   99% of the time and the Admin account, I use the standard account for applications that will work on the admin account.

  I had Win 7 since December 2009 and it worked smoothly on my new X 200. Last month, I found a problem with my user accounts. When I disconnect an account and switch to another account, Win 7 support a temporary profile.  It works in two ways (disconnect or other accounts and the other does not).  To resolve this problem, I have to restart.  I can connect to either account after the reboot.

  If I switch users without logging first, it works very well.  Not sure if this is a windows problem or a X 200 problem.  I use mode 'sleep' 99% of the time, so after my system woke up I have to go back to the same user account that I used before I put the system to sleep or I get the loading of the temporary user profile.   Anyone else having this problem on a X 200 or Win7?    Like to think that I'm not crazy!

  NB: I have 2 user accounts on my Vista and XP systems, and I have this problem.

  I spent 2 weeks of searching on the Microsoft Forums, Google and asking COMPUTER technicians what they think.

  COMPUTER technicians are aware of the problem and have never been able to fix it (permanently). They remove the registry for their customers (but the problem always comes back).  Google says do a removal of the registration of your profile (temp fix) and some users of MS Forum suggest this route also. I choose to restart.

  Finally, I came across an answer from Microsoft TechNet for the exact problem.  If you are interested, here is a link...  http://support.Microsoft.com/kb/947238

  THIS APPLIES TO

  • Windows Vista Business
  • Windows Vista Business 64 - bit Edition
  • Windows Vista Business
  • Windows Vista Enterprise 64 - bit Edition
  • Windows Vista Home Basic
  • Windows Vista Home Basic 64 - bit Edition
  • Windows Vista Edition Home Premium
  • Windows Vista Edition Home Premium 64 - bit Edition
  • Windows Vista Ultimate Edition
  • Windows Vista Ultimate 64 - bit Edition
  • Windows 7 business
  • Windows 7 Home Basic
  • Windows 7 Home Premium
  • Windows 7 Professional
  • Windows 7 Ultimate
  • Windows 7 Starter

  Current situation: this product 'By Design '.

• * Switching user EDITED * accounts when it not an account administrator and user switching welcome screen/fast are off.

  I really need help. I am the administrator of the computer, but I'm not connected my admin account, I am connected to a limited account. I need to change the account, but the user function is disabled, and being in a limited account, I can't turn it on. Also, when I was originally in the admin account, I tried to re - turn on the function, but he told me that I couldn't until a program has been uninstalled. Oh, and there is no welcome screen because she wasn't too. Can you help me to activate this function and return to my account or am I trapped forever, never able to access my account admin impossibility?

  * Edited question:

  My computer is a professional Windows 2000 XP laptop, and it's me signature automatically on the limited user account. I tried pressing the SHIFT key when you restart the computer, but he did that tell me there was a "stuck key" and I had to stop by pressing and continue. I don't know what was the program that appears when I tried to re - turn on the windows screen, but as soon as I can get to my admin account, I can understand. So far, the advice, they gave me did not. Any other ideas? Thank you

  You have left out some important information. What version of XP you, run Home/Pro/Media Center? Are get you connected automatically to your limited user account? If so, then hold down the SHIFT key as Windows starts. Should you get the classic login box and you can enter your own name of user and password. Once in, set the auto paper by doing the opposite of:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  If you want to get the welcome back screen, you will need to give the exact text of the error message and just say "a program". The difficulty depends on what "some program" is. MS - MVP - Elephant Boy computers - don't panic!

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• I am not able to switch user... says accounts computer is currently in use and locked

  original title: computer locked :(

  I am not able to switch accounts of users... says the computer is currently in use and locked and any administrator can unlock? How to unlock so I can not on my other user accounts?

  Hi hellfire4,

  ·         You are the administrator of the computer?

  ·         This computer is on a network?

  If this computer is on a network or a domain environment, then you will need to contact the administrator for more help.

  If this isn't the case, then you may need to ask the user who is already connected, turn off the computer. In addition, you can consult this article to disable this option. (If it is not in a network or a domain environment).

  How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7