switches grey slippers

Similar Questions

• P50T who-A-113 - device missing BT after Win update 8.1

  Hello;

  First of all, I would like to mention that I tried all the solutions on the web that is about even close to my problem but still not arrived to fix.

  So I decided to write here and hope someone knows how to solve the problem.

  I have a Toshiba boom P50T-A113 Touch laptop comes with windows 8 unique language.
  When I first bought it 2 months ago, he was working well. And I'm sure that I used bluetooth to transfer files back then.

  After that I've upgraded to 8.1 windows my bluetooth device has disappeared.
  I tried to reinstall the drivers from the toshiba Web site but it did not help.
  So I reset to factory settings and return the origin of windows 8, but bluetooth device did not return.

  Here are some symptoms that might help to understand the issue:

  1. it has been a symbol of bluetooth (2 sub-options grayed out of one of them was peripheral bluetooth generic I guess) in Device Manager if I open show hidden devices on the view menu, but he disappeared after the second time I update to 8.1. Now there is no bluetooth device at all.

  2. There was a non-working bluetooth switch greyed just below the switch to WiFi when I was on windows 8, but he went too after 8.1.

  3. no bluetooth in the lower right corner icon.

  4. I installed driver of toshiba system still nothing.

  5. when I try to install the website of toshiba bluetooth stack, it loads some files and installation section stucks pilot bluetooth and asks me to connect the bluetooth device, and then click ok.

  6. I tried troubleshooting on the devices and the network. Did not help.

  7. There was a non-working bluetooth submenu when I right click the Notepad icon to control panel-> audio-> devices and printers, that there is no after 8.1

  I hope someone knows how to solve this problem because I can't use my laptop without a bluetooth device, and this is a new old laptop 2 months. You can't imagine how frustrating is not to solve a software problem, after 1 month internet search.

  Thanks for the valuable ideas and suggestions to everyone who responds.

  > 2. There was a non-working bluetooth switch greyed just below the switch to WiFi when I was on windows 8, but he went too after 8.1.

  Because BT worked correctly BEFORE the upgrade to Win 8.1, my first question is: did you update you Win 8.1 as advised by Toshiba? Did you follow the step by step instructions?
  http://www.Toshiba.EU/innovation/generic/windows8_1-upgrade-stepbystep/

  If this isn't the case, I highly recommend you to do this!

  Like many, I know that the laptop was equipped with a combo Intel 2230 BGN + BT (Jackson Peak1) Wlan card that supports both the BT.

• Cannot switch between multiple Time Machine backups

  I generally save my 2010 Macbook Pro to a 2012 Time Capsule, which is attached to my router via an ethernet cable (most recent) wireless. On a trip, I make the additional backups on an external hard drive. However, when I go home and try to return to the TC, my internal HD is now on the time Machine "Exclude" list and cannot be removed (greyed out). When I try to save, I get a message saying "no disks are available to back up."

  What has happened a few times, and the only solution I could find was to delete my original Time Machine backup and put a new (which took forever).

  Any ideas why my HD internal is added to the exclusion list after using Time Machine with an external hard drive?

  Time Machine backups on a network drive or a disc attached locally stored in different formats. Switching between them was not in the overall theme of the design of this service of OS X.

  I suggest that you set up Time Machine to use multiple disks.

  FWIW, in my case, I backup destinations, Time Machine on a Time Capsule and an external hard drive of 2 bolt of lightning. When both are available, the time goes 'take turns' Machine backup on each drive.

  If a disk is not available, it backs up to that which is, and which ignores the backup of the other. When the two are connected again, backups continue on both.

• Bookmark button is blank grey bar action

  When I double click on the star hollow to insert a bookmark, the bookmark "Button of Action" dialog box is a grey bar empty, somewhat truncated. He said: "Delete bookmark", etc. This happened a few versions of FF there is.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• "grey" hotmail format toolbar - how to re-enable it please

  Were not able to re - define the police e-mail - defined as tahoma - despite go to Options and selecting and saving alternative police - the police rest as tahoma and the toolbar remains greyed out.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• After loading the page colors are suitable, then suddenly, it turns clear blue and the text turns grey

  When I open google, the immediate page just comes with a white background and black text. Until the page ends well, the background turns light blue and grey Tower of text. Show logos right framed in white background, but the rest of the page is light blue. It happens in other websites as well. It backgrounds are good, but where the text is as in the forums, the text is grey, and here the background colors have faded too.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• It is possible to install free apps without a password or contact ID? In settings under restrictions > password settings, the options of free downloads is grey.

  I got a new iPad Mini 4 and the file downloaded all of my old iPad Mini 2 from iCloud, including parameters. However, when I try to install free applications on the App Store, I'm asked to verify my password. I checked my settings of restriction and enabled apps install but in the password settings (fewer restrictions affecting), the rocker switch to demand a free download of password is switched on and grey so I can't turn it off. In addition, with switch app install restrictions tipped off, completely missing my home screen App Store icon. When I turned the restriction to install apps on the App Store icon reappeare. My guess is that Apple is no longer us gives the opportunity to bypass verification of password for the installation of the same free applications, but I thought I would ask if anyone had a solution.

  It is not related to the limitation, but may be what you are looking for: settings > iTunes & App Store > Password Settings > request password - off

• Can I connect a switch to my Airport Express 1st gen?

  Hi Experts,

  I was wondering if I'll be able to connect a switch 8 ports to the ethernet port on my AirPort Express?

  My current setup is the D-Link router/Modem > airport Time Capsule <> AirPort Express

  So I've matched the AirPort Express to the Capsule to expand my network.

  FYI: AirPort Express is 1st Gen model.

  Thank you.

  Tony

  If you really have a 1st version of the AirPort Express Gen (see note below *)... and you have configured to connect to the time Capsule using Wireless 'add a wireless network', then the Ethernet port is active and you can connect a switch to the Express.

  Don't forget that the Ethernet on the Express port is only 100 Mbit/s capable, so even if you could have a 1 000 Mbps or Gigabit switch, the speed will never be higher than 100 Mbit / s.

  * A 1st Gen Express is A1264 model number. Look on the side of the Express to locate the model number. Hard to see, with grey lettering on white background.

• Gray on switch

  Dear Sir

  If everything knows how to do it, when I use the switch, the light should stay on and the switch should be greyed out

  
  

• Where is the wireless switch?

  My mother has an Acer M3900 and she accidentally turned off the wireless switch.  The manual is useless and here on Acer.com it is said to use FN + F3 but his computer isn't a FN key.

  What other combination can I try?  I tried to find the setting, but it is a Windows 7 computer and doesn't have this feature.

  right click on the ethernet icon, choose open network and sharing Center click on change adapter settings on the left side, is your wifi adapter listed?

  If it is greyed out, right click and choose enable

• I can't switch user in Windows 7

  Hello

  The option for users to switch in Windows 7 is missing or gray. This feature has been removed? How can I get that back?

  Thank you

  LD

  Hello, LD,

  The most common reasons for the lack of change user option or be grey is that group policy has been enabled to hide the option or a registry key has been changed. You can work around this problem by following the steps below:

  If missing change user, check the settings in group policy

  1. click on Start, type gpedit.msc in the Search box and click the gpedit.msc in the list of programs

  2. click on strategy Local computer, then click on computer, then click on administrative, templates , and then click System and then click on logon

  3. in the logon window, double-click hide the entry points for fast user change

  4. click on not configured, click apply , then OK

  If the user of the switch is dimmed, change the registry

  1. click the button Start , then type regedit in the Search box. In the list, click on Regedit.exe program.

  2. navigate to the following registry key
  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  3. Click to select the System

  4. double-click on the key HideFastUserSwitching and change the value from "1" to "0".

  I hope this helps.

  Thank you

  Bobby

• Virtual network and switch Option grayed out?

  I have two hosts on my environment, clustered. Web client (using Vsphere 5.5), I choose a host-> manage-> virtual switches, but all the options are greyed out (add host network, refresh the network hosts, manage physical network cards, etc.). I go to another host and choose the same thing, and these options are available. I don't know why this is happening? I have googled around, but can't find anything useful.

  You can do it in vSphere Client Host? Sometimes the Web client takes forever to load the icons change to the virtual switches.

  Maybe you should give the vCenter, a little more RAM and the Java process Web client as well.

  See a good explanation on how to increase Java memory for customer Web here: Improve vSphere Web Client Performance. Tom Fojta & #039; s Blog

• Problems with greyed of leaders and in the design of DW CC 20141 pane editing

  OK, I'm using a MacBook Pro System version 10.9.5. and Dreamweaver CC 20141. I'm trying to follow the introductory tutorial on the Adobe site, which is to create a basic page, structuring of the HTML and then comb it. In the tutorial, the page contains the code and the views live running. There are rules in the Live/Design pane and the instructor is able to enter the Live copy / Design pane as well as the code pane. When I try and follow my rules are not visible and are grayed out under the command of the leaders/view/Show. So, I can not leaders appears. I can only enter in the Code pane, not the design of the layout pane unless I double click on the type. When I double click the type in the design pane I am able to enter and change, but then the pane Code greys out.

  Seems that I have a preference setting wrong or something.

  Thanks for any help you can provide.

  What you describe is normal behavior. So I think that the tutorial should be posting code/design view. Try to switch to code/design and see if that helps.

• Distributed and switch the Channel ports on ESXi 4.1

  Hey all,.

  I'm trying to configure my rising for a switch distributed in ESXi 4.1 to a Cisco switch upstream. When I change the uplink group, I see that all the parameters of clustering and failover are grey. Why is this?

  What should be the protocol port of the switch upstream channel? I use LACP to my cluster equipped with Nexus. This cluster is just the integrated switch distributed Enterprise Plus.

  Hello

  The team and the failover is configured on the port group , not on the uplink group. If you select one of the groups of Port, you will notice that you can make the changes.

  Regarding the question of ports-channels, it's probably a good starting point: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004048

  Here is another good article on this subject: http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf

  There seems to be a lot of back and forth, but basically the vSwitches do not support the aggregation of dynamic link (LACP). It must be defined as static. This is where some confusion comes into play as LACP can actually support static and dynamic.

  Kind regards.

  Post edited by: ThompsG adding link

• All PREVIEWS SQUARES GREY - but pic ok in Control Panel development

  Hello

  I moved the folder library in OSX and then tried to start lighroom again once it points to the new location of the library.

  Eventually all the previews have been replaced by grey squares (with curves of color showing on the right, stars etc but no picture). It seems that the extracts are not created, but all the information is here

  Which would explain also why when moving to the rider of the developer, the pictures appear and I can work on it again. Subsequently she appears also again in previews. S

  Tried to optimize library but after 6 days of ongoing process I stopped and no change at all to the library.

  Have about 60 k photos in the library.

  I tried the monitor settings, but that makes no difference

  This happens also with newly imported images.

  those who appear clearly in the library are grey at the next startup of the project.

  execution of lightroom 5 with imac and final osx

  Any help would be greatly appreciated!

  I would check that I understand what is happening...

  In the library module, all the previews are grey.  When you switch to the develop module, you can then see the preview.  They appear in the library for a short time but gray then go again at the next startup.

  Is this correct?  If so, you probably have a corrupt preview cache.  More on that here: http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1140/188/lightroom-says-my-preview-cache-is-corruptedhow-do-i-fix-it