Switching between forward and back Web cameras
I am using Skype, but the PC only accesses the camera back. I need to change between the cameras front and rear for Skype. How can I do this?
May I ask what phone do you have?
In the settings of the Skype software, you will find the camera option.
This option allows you to choose the device that should be used by the Skype app.
Tags: Toshiba
Similar Questions
-
I want to restore switch between windows and display the desktop icon
a few days before these two icons was actually on the task bar and now I have deleted how restore it back
(switch between windows and display the desktop icon)Hello
Copy the new:
C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch
To your user account to:
C:\Users\
launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
(Vista) Is there a PRACTICE way to switch between speakers and analog headset?
(Vista) Is there a PRACTICE way to switch between speakers and analog headset? Must I ALWAYS return the default setting, depending on which audio output device I want to use?
We have recently installed Music Maker 16. Before that, we never had a need for headphones and a microphone. Now, in trying to use the headphone and microphone - and THEN switch back to speakers - we discover a problem. Apparently, the only way to do it is to change the audio output device by default EVERY time.
The dispute with this cannot be more of this. My son records a beat and singing (with headphone and microphone), and then, play through speakers (so we can all hear), we need to change the default settings. And back... There must be a better way!
Any help would be greatly appreciated. Please talk layman jargon; I'm not a COMPUTER guru. Thank you!!!
Hi AnnieElle,
You will need to switch between the speakers and the analog device and special value to use as the default device. There is no way to set the device to be used at the same time. You can follow the steps below to switch between the speaker and analog device.
1. right click on the speaker icon in the taskbar.
2. click on the playback device.
3. Select speakers or analog device.
4. right-click on it and click on set as default device.
Hope the above information helps.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?
Hello
How can I switch between NVIDIA and INTEL graphics cards?
PS
I have already installed all the drivers, but I can see that INTEL the card used chart!* OS: Windows 8.1 x 64
* NVIDIA driver: 340, 52-portable
* DirectX: 11Hello
The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.
For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
This setting can be changed in the nVidia control panel sHere, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)
Now in the main window, you will find two global settings and program parameters tabs
In the program settings tab, select the (game) program that needs to use the nVIdia GPUIf it is not listed, click the Add button
Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)Last but no less, in this program-specific settings, you can assign additional features to improve performance.
-
Switching between microphone and line-in in the Realltek Sound Manager
Ok.
Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
But how can I switch between microphone and line-in?
At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
Everyone knows this, or has some experience in this regard?
Cordially in advance
FransSorry but I don't understand what exactly you want.
You have built in mic or you can use the external microphone connected to the mic-in port.
When the external microphone is connected a resident will be disabled.The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?
-
Equium L10-273 kept switching between battery and power
Hello
I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.
He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?
This laptop is less than 2 years old, but apart from his one year warranty.
Hello
According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.
-
It takes up to 4 minutes for the player switch between library and Rip, and vice versa.
I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.
Hello Absno69,
Thank you for your message. You mentioned that there were no new software installed before that happens. Were there any hardware changes or updates? If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively. Click HERE for the system restore instructions.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Switch between files and change the window using f8 - Dreamweaver CS 6
In Dreamweaver CS 2, I could switch between files and windows edition with the f8 key. Dreamweaver CS 6, this doesn't seem to work. Is there a way I can put it so that I can switch between the 2 windows with a keyboard shortcut?
Hello stilley,.
I'm now working with DW CC, so I can only show you how to work with it, but I'm sure it's the same way:
In my German DW:
Bearbeiten > Tastaturbefehle > screenshot > files > Kurzbefehle +-taste press > change > Ok.
Translated something like:
Edition > keyboard shortcuts > screenshot
> Files > shortcuts + - press > edit > Ok.
Good luck!
Hans-Günter
-
Switch time delay between 3 and back!
Hello
I'm trying to figure out how can I switch between three cases in a case structure for a while between each switch.
For example: I have three cases in a structure of case (case) {0,1,2} where zero is the default case.
What I want to do is to start in the case of the value by default 0 wait 1 s switch for case 1, wait 1 second switch case 2, wait 1 second back switch for case 1, wait 1 second back to the 0. Then repeat the order.
I used the timer elapsed value of the ramp function Tim from a selection function between true and false, but with the additional case I don't think that this approach works.
Any ideas?
Search for the term "State Machine". That's what you're trying to invent (nice work) so feel free to 'Cheat' and look for the wheel as it exists today.
Ben
-
Resolution of screen changes back back when switch between Yosemite and Fusion 7
Upgrade to Yosemite on my MacBook Pro has forced me to also upgrade to Fusion 5, who had been very stable and problem free. Unfortunately, I knew a behavior very boring to the resolution of the screen in my virtual session of Windows 7, when I toggle between Yosemite and the virtual partition of Windows 7. Any time that make a screen resolution change and change over on the side of Yosemite, when I return to Windows 7, the resolution returns to the default setting of 2880 X 1800, which requires a magnifying glass to see! Does anyone else know this? I couldn't find a thread discussing this problem, but I know that yosemite is new.
In addition, since it is clearly a bug, can someone tell me the best way to report it to VMWare? I'm sure they want to know about the bugs, but I don't know the best way to report them. They were very helpful when I discovered how hard this upgrade to Yosemite before checking to see Fusion 5 was consistent (if not) was a mistake on my part - they got me on track, and even if it's a bear to learn how to get a live person on the line with VMWare site Once I did, I finally got a guy who nailed - Kudos to their technical support for this team.
Glenn
Hello Glenn
Try to disable the support of the retina by going to
1. Virtual Machine menu > settings > display. Uncheck the use full resolution over Retina display.
-
Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
- In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- In Firefox 29,0 and above, click on the menu button
-
suddenly, last night something happened with youtube. whenever I run a video on youtube its green for a few seconds, then it goes back to normal. its also green when I fast forward/jump and when I change between full screen and windowed. I linked to a screenshot of how it looks as if I googled this problem I find something else where people get a green screen but no picture at all and that it lasts the entire video.
I tried updating the drivers for my graphics card. I tried to play on my nvidia card rather than use my intel graphics hd 4600 and still got the same result, but instead to get a green image, it was really dark almost black. I also tried to reinstall flash even downgrade to an earlier version, but nothing does. and the strange thing is that I only have this problem on youtube and only through firefox so I even tried reinstalling firefox, but that did not work either
I found 2 things of this kind of help.
the first solution is to disable hardware acceleration, but instead to get a green image for a few seconds, image frozen for the same period of time and then play and she is like when its Green, when I start it up, jump and change to full or windowed.the second solution I found in support for mozilla, to change the HTML5 player. But even if this player works great I really like it. for some reason any the break from the drive when I change between full screen and windowed mode and I don't like these pop-up windows get you that its now in full screen and I can press ESC to quit.
These are just little things, but I would like to return the standard player.
If anyone knows anything that could help me with this please let me know.This is the screenshot:
http://i1285.Photobucket.com/albums/A584/JimZiii/1_zpsb3d41a08.PNGWhat a little wild speculation?
YouTube uses a technology that has chopped videos in individual pieces, which is probably video serve more easily, but could create more opportunities for issues when moving in the video. There is an add-on called Center of YouTube that allows you to disable this technology and back to the days of one big file. Might be worth a try.
-
Satellite A500-19N - Wlan switch between on and OFF in battery mode
Hallo,
I bought a new A500-19N Satellite three days ago and one have the problem,
When I used the laptop battery, the wlan switch mode between connect and disconnect.
With powersupplier, I have no problem.All energy wlan settings I adjusted to full performance and now I have now idea how can I solve the problem.
Do you have any ideas or advice?Thank you very much
NicoHello
You must verify power WLan settings in Win 7 power management and need to disable the power save for WLan in battery mode
I found a great HowTo but for Vista OS.
But the settings are not really different.Check this box:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41Welcome them
-
switch between log and linear waveform graph
I have a waveform graph that plots linearly. However, it causes an error during the logarithmic line tracing. Is anyway to create a switch that allows me to change between log and linear plot without creating additional graph?
Thank you
Chris
Use a property node: Y Scale.Mapping Mode. Written 1 to the node passes in logarithmic mode and 0 is for the linear.
Lynn
-
Design of switching between Nexus7K and active / standby firewall
In the attached diagram, Nexus7K is used in two ways: on the left side, pair NX7K connects to the firewall as layer 2 trunks. vPC VLAN are shared through resources. The firewall is a pair in Active mode / standby. On the right side, another pair of NX7K connects to the firewall as layer 3 rotued links. HSRP or VRRP is running between the pair of NX7K for firewall VLAN SVI.
Because even NX7K have mesh connections to the active firewall units / standby, I want to make sure in failover scenarios (failover firewalls or failures of NX7K), the link that remains between the pair of NX7K and the firewall can actually send traffic (not perforated black).
Failure scenarios I can think of include: Firewall active failover on the eve, failure of the main device NX7K, double NX7K active and failure of peers-link NX7K vPC. I would like to get some advice on what I should consider and implement in these scenarios to achieve high availability.
Many thanks for any advice.
Hello
your topology, I see that the main problem is that the physical connectivity from the firewall to the pair of devices nexus in topologies to fails to a redundant link to the N7K
first since you're using vPC with one counterpart vPC linking the pair of N7K then you must follow the recommendations of Cisco firewalls of L2 and L3 link connection
L2 if you pass vPC vlan on the trunk in your topology and firewall then there is a possibility of blocking traffic or drop cases underwritten by vPC loop prevention mechanism in the case for example a vPC counterpart link gose down
the fix to the East either:
use no-vPC VLAN and link to switch separate inter for VLANs (i thin that you already have this link)
or multi home L2 connects each firewall for the two switch N7K and assuming that HSRP is configured in the N7K and static routing is used between the firewall and the N7K
for links to L3 Firewalls:
You must stream as well (if possible and recommend) and use a static routing between N7K and firewalls and firewalls must point to the VIP of HSRP N7K
multiple L3 and L3 dyanaminc routing peering on the link of the vPC-peer is not supported design
Look at the discussion that might help as well
https://supportforums.Cisco.com/message/3792466#3792466
hope this helps
If useful rates
Maybe you are looking for
-
How to move the Windows taskbar back to the bottom of the screen
original title: I am running vista. My taskbar now (the one at the bottom of the page), or vertical on ie. I would like to make horizontal as if it was. Cauused by a worm virus. Can you help me I would go from vertical to horizontal display on the ta
-
Oracle Linux (Red Hat) on 14 t Envy Touchsmart
I am looking for a compact machine to install Oracle Linux (based on RHEL) for purposes of development. The 14 t Envy Touchsmart ticked all my boxes (with the exception of the touchscreen) and I'm a point where I am seriously considering this machine
-
"JVM 517 error corrupted file system". (On Storm 9530 Simulator)-Please HELP
I receive the error described in the header for the Verizon Storm 9530 Simulator. Normally, this error set a Blackberry OS error that need to reinstall, but I'm just on the Simulator, not my phone. I tried to add all kinds of files to the path system
-
Very strange situation with trash. Today it suddenly stopped, sending items, except those on the desktop into the trash and ask you if I'm sure I want to permanently delete the selected file. Do NOT for the files on the desktop, instead of this reque
-
DW CC 2015 Flash no longer works...
HelloSince a few days Flash inside the DW CC 2015 no longer works.In the AuthPlayLib.bundle folder-DW and Flash Player.pluginzero byte. This morning I uninstalled DW and reinstalled, butNothing helps.Also, I installed Flash-viewer again several times