switching for all components

Similar Questions

• ProBook 4520 s: updates to driver for all components

  Salvation; I read the posts on the update of the drivers on the ProBook 4520 s and I do not understand that we should select the most recent drivers from the drop-down list under EACH item listed.  I'm still a bit confused, however.  Some components have several drivers listed under them, some of which have different names/Descriptions.  I need to know WHICH of these "components named" is installed on my ProBook?  Alternatively, they are ALL different names in EACH of the installed components?  I'm afraid to install the wrong drivers if I select just the most recent review date, irrespective of the name/description.  I have had my ProBook 4520 s about 5 years and NEVER updated ALL drivers (that I can remember).  I am running Windows 7 Professional, 64-bit with the Intel Core i5 460 M/2.53 GHz Quad Core processor, a 320 GB Serial ATA-300, 7200 RPM hard drive and a HD Graphics Dynamic video memory technology Intel graphics controller, etc., etc.  The problems I encounter are: it is slow to start, it delayed opening opening sites & programs & there is a power outage occasional temporary graphics (gel?).  So, at the very least, I think that my graphic card driver needs to be updated.  But surely most other pilots must update as well.  (And Internet HP site lists a ton of drivers when I plug my ProBook.  I use my laptop every day and have not had a major problem.  I recently had to update the drivers on my HP printer, and even if the printer is NOW printing again, I ALWAYS shows an error on the ProBook (when I go in devices & printer from the control panel), on the Officejet Pro 8600 Plus e-all-in-one. As the error message did not disappear after I solved the printing problem, I think it's probably a good idea to update ALL the drivers in my ProBook before I start to experience more problems... Is someone can you PLEASE help me understand WHAT drivers should I install and in WHAT order, so I do not screw up my ProBook?  Thank you very much!  I appreciate all help.

  Go to the Device Manager in Control Panel, check the names of the devices under each category. Download the latest version of the one you want from the HP support page depending on the installed operating system

• Implementation of QOS for on multiple switches for two VLAN

  afternoon all that I was looking for a little help in configuring QOS for two local area networks VIRTUAL, I created. These will be for voice traffic vlan 22 and traffic video vlan23. I also have three other VLAN for pc, wireless devices and our cnc machines. We have 5 switches which are all SG30028P with a single switch making the intervlan routing (Layer 3-powered). all switches are resources shared by the main switch and ive been through the guide written on how to do it on a single switch, which I think is layer 3.

  could someone help me with what I want the video and voice to take precedence over the rest of the traffic

  best regards Patrick

  Right, this way, you can give priority to IP or MAC address.

  No, there is nothing different, only one review of the routing. As the L3 switch can make local routing decisions, the placement of the ACL can vary. In an L2 environment, all packages are transferred to the router, then back down the network to the local destination, so you can clear an ACL on the uplink.

  Since you have a L3 switch, you can practice the same, empty an ACL on the link downstream for L2 switches for all traffic subject to the ACL. Any connection to the L3 switch, you can of course apply an ACL to the uplink router to get all notice of incoming traffic correctly. You can also apply a policy on port source interface to get the note as soon as traffic hits the switch.

  QoS policy is the concept of an ACL, you want it is the closest to the resource. If you apply a QoS policy an uplink upward, QoS will be marked up when it hits this port. Not before. So it should be applied closest to the device as possible. Many times, local QoS is not as important, until it starts to get to the router. As most Cat 6 environments can generally manage all local traffic. So, depending on the number of devices and the amount of traffic, a decently robust network can handle all traffic local then you just give priority to the uplink remarks to ensure that what is important is first.

• Spanning tree Distribution Switch Port is root for all the VLANS

  Hello world.

  Uplink to switch on 2 layer network flat if Distribution change a.

  This distribution uplink port is Root Port.

  Core switch port goes to the Distribution switch appears as State PLEASE FWD.

  It will cause slow for users who are connected to the network on the Distribution switch?

  According to my understanding core should be Root STP for all the right of VLAN?

  If necessary how can I make kernel as root port switch port?

  Thank you

  MAhesh

  Hello

  a root is a designated port (if shipping port) on a non-root bridgewhich a path root the lowest cost to the root bridge. So there is nothing unusual here, and your kernel needs to be done to root bridge if you run STP between distribution and kernel as you apparently.

  Kind regards.

  Alain

  Remember messages useful rate.

• [ADF, JDev12.1.3] How to change the font size for all of the components of output within an af:panelBox?

  Hallo,

  I need to change the font size for all the inputTexts, LOVs of outputText, labels, etc. which are in different panelFormLayouts inside a panelBox.

  I tried to define a CSS class and to assign to the panelBox but it has not worked.

  You kindly suggest me an easy way to do this?

  Thank you

  Federico

  Hello

  You can try something like this:

  AF | panelBox::content label, af | panelBox::content, af | panelBox::content entry, af | panelBox::content select {}

  your style

  }

  At least the style of the components you named should be changed. If you need more you can add others.

  Kind regards

  Ruben.

• Reinstall Acrobat 9 Pro, originally purchased in the past of CS 4 Standard, on a MacBook Pro, OSX 10.11.5. To install all components except for the Pro.

  Reinstall Acrobat 9 Pro, originally purchased in the past of CS 4 Standard, on a MacBook Pro, OSX 10.11.5. To install all components except for the Pro.

  It is probably not compatible with your operating system, but you try to take advantage of some of its features by checking the Setup logs.

  Troubleshoot installation with log files in Adobe Creative Suite (CS5, CS5.5 CS6), PS Elements and Premiere Elements

• Hello, I currently have 3 subscribers: 1) first 2) effects after 3) package for a student in the acquisition of switching on all the programs. Can unsubscribe the first two presentations, namely, I want to unsubscribe from the Adobe Premiere and Adobe bac

  Hello, currently I have 3 subscribers: 1) first 2) effects after 3) package for a student in the acquisition of switching on all the programs. Can unsubscribe the first two presentations, namely, I want to unsubscribe from the first and Adobe Adobe after effect.  user: [email protected]

  Hello Anton

  I checked your account and see that you had a first CC, After Effects CC & a full subscription of creative cloud.

  I cancelled the subscription Premiere and After Effects for you.

  Let me know if you need assistance.

  Thank you

  Scott

  Follow us on Twitter @AdobeCare

• Plans of photographer for all switching applications keeps failing.

  Hey guys! I'm changing my plan of photographer to apply a plan all the app, but it won't let me finish the change. Can anyone help?

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

  or

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How to stop Firefox blocking Flash once and for all?

  I have the latest version of Adobe Flash and Firefox insists on constantly to block it.
  I tried the thermostat settings in advance however that they do not make the choice to stop it completely.

  I don't want to switch browsers, but the East is frustrating.
  Thank you for all the solutions.

  Adobe has released an update today to solve critical problems, he admitted were in the 18.0.0.203 version. You can get 18.0.0.209 on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  No one can promise that this kind of block will never happen. If that happens, if you are not accustomed to using the "Request to activate" feature a plugin, here's what to expect:

  When you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! It will just sit there in case you later want.

• I need to uninstall all components of itune

  I ran e. MS Security and avg to day when I came home, I got my old version of itunes is back with his bad library!

  I need to uninstall all components of itune "apple software update ' was the 2nd to remove and uninstall wouldn't IR... I restarted and it has not yet...".

  Apple said that I have to use windows install clean utility to solve this problem, which could

  Hello

  You should inform Apple that Microsoft no longer recommends the use of the Windows Cleanup utility and no accommodation is available for download at their Web sites.

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  You can also try this, once you know exactly what to delete.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• No updates for all programs is including Vista sp2 installation

  I tried to install sp2 to Vista for nearly a year.  Recently, none of my other programs updates will install either.  I thought to go into repair mode, but have yet to see than recommended. Any ideas?

  Hello

  the error codes that you get when updating are required to help you with this

  and this is the wrong forum for this

  Try these steps and repost in the correct forums

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  Use this forum for all issues related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Foglight Custom monitors for all Interfaces

  I am trying to create a custom desktop for the OID 1.3.6.1.2.1.2.2.1.8 - ifOperStatus for all interfaces. I created the custom monitor successfully, but when I go to apply, Foglight makes me choose only a single subset (aka Interface)? I must add this manually for everysingle interface? I also want to add this monitor for a group of Force10 switches, so more than 500 interfaces...

  

  Hi Jim,.

  That's right: you need to add the client once policy monitor for each interface you want to monitor. We do not support a table of results of a custom monitor.

  I had my PM team to see if we can add this as an enhancement request.

• Remove the printer and all components 5610xi

  I encounter a major problem with my 5610xi all in one, and can not remove or uninstall.  The CD does not uninstall everything, nor uninstall under programs.  Whenever I log in, it wants to install something and I can not find the .msi file, that he needs and everything is messed up because I tried to reinstall nothing doesn't.  I would like to remove all components and start again from the CD.  I am running Vista 32 bit on a HP dv9417cl.  Can someone help me please?  I'm sure that someone else has had this problem.

  Believe it or not, we are in fact making progress. There is a document that should help you to work through this problem. If he doesn't get things fixed upward, I know a workaround solution allows to bypass the Solution Center for maintenance of scanning and printing. Let me know what happens.

  On the Software Installation progress bar stops or crashes

• NSS4100 RAID DOES NOT START, please check that all components are present

  Hi, NSS4100 storage system could start the raid10.

  The message is:

  --

  The RAID boot failure
  Please check that all components are present

  --

  All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data?

  Thank you, Dan

  There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data.

  Here are a few RAID array information:

  (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.)

  (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost)

  (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.)

  (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down)

  (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down)

  (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive)

  (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended.

• Port of the switch for LAP

  Hello

  I have a potentially ridiculous question.

  I work with a WLC 5508.

  He'll be there 2 separate WLAN on their own VIRTUAL local area network.

  The WLC connects to the Southwest over a trunk link, which seems logical.

  However, ym question lies in the connection with the TOWER to the switch... should be a trunk as well?  If each SSID is on a VLAN respective, then TURN to pass wouldn't be a trunk as well?  Example: I have my tricks on vlan 9 (192.168.9.0/24) and I want my personal WLAN on VLAN 6 (192.168.6.0/24) and I want that my guest WLAN on vVLAN 8 (can you guess the IP address?)

  I read that the link between the KNEES and the SW needs to be an access port (so it would ' Switchport access vlan 9 "on the port which connects the LAP... but how would the traffic / VLAN 6 and 8, considered then?)

  FYI - DHCP for all devices (APs and hosts for each WLAN) is going to be the closest crossing the WLC, the DHCP for the APs will opt 43 defined pool so that APs can find the WLC...

  I'm getting confused about how the traffic is separated, can someone enlighten me?

  I still have to set up the JUMP with IAS and other, buit I must get DHCP and WLC communications up to b4, I even worry about security...

  However, ym question lies in the connection to the LAP to the switch...does that need to be a trunk as well?
  

  No. an access port.