Port of the switch for LAP

Similar Questions

• The Port of the switch to ESX host configuration

  I have a switch that connects to a physical server used in

  virtualization.  This means that virtual machines with IP addresses on

  several subnets will send layer 2 frames to this switch.

  However, in an attempt to reduce the number of network adapters on the server

  It is.   If there is only one card NETWORK in this physics

  Server connected to a physical switch port - it is possible to

  with a port on the handful of physical switch frames that come

  all virtual machines running on the physical server - when these VMs have IPs

  different subnets?  Or each separate subnet property intellectual logic requires a

  switch port separated to manage its images and its own on physical NETWORK card

  the server used for virtualization?

  Thanks for your comments

  Yes, you need to configure the physical switch port as a trunk and then configure the VLAN tagging on your Exchange Configuration-> Networking.

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Batchmodel: How to use the different positions of the switch-for EHR?

  Hello

  I use the Batchmodel OR three EHR. HAD the current number can be read from RunState.TestSockets.MyIndex.

  Can the lot this three EHR. What is the way - OR to use different maneuvers (OR-SwitchExec) to each dut?

  TestPlan is for example

  Configure the DMM

  Put

  Measure

  Turn off the switch.

  Switching is of course different for each Instrument.

  I really should add an if around each switching (= endless work) or is there an easy way that I'm not currently?

  If (RunState.TestSockets.MyIndex == 0)

  DUT1 switch

  Else if (RunState.TestSockets.MyIndex == 1)

  Switch to DUT2

  Else if (RunState.TestSockets.MyIndex == 2)

  Switch to DUT3

  on the other

  end

  Thanks for the tips

  Best regards

  OO

  I wouldn't use either of the prerequisite or if things... It's too much work and I'm lazy.

  I would just use the built in step of switching:

  http://zone.NI.com/reference/en-XX/help/370404G-01/NISE/TestStand/

  Name your routegroups in Switch Executive to match your shooting numbers.

  For example, in the process (s) to connect: box can have the following expression:

  "SigGenToUUT" + Str (RunState.TestSocket.MyIndex)

  And have a road connecting the signal generator to the UUT named SigGenToUUT0.  It would be for USE in socket 0.

  Just a thought!

• where to find the switch for wireless connection on computer laptop esprimoV5535

  get the message {connection Wi - Fi doesn't work}, but it is not no matter what visible switch on laptop so presumably its located

  via the keyboard

  Hello

  ·         If it works much earlier?

  Through my research, I think it's the F1 key, you need to press on and press and hold the FN key (lower-left beside Ctrl) at the same time. This should illuminate the LED on the front of the computer laptop-extreme right wireless.

  You can view the documentation for the laptop to switch wireless for more information.

  For any other help, I suggest you to contact your laptop manufacturer support.

  Here is the link: http://support.ts.fujitsu.com/Download/Index.asp?lng=COM&Level1=&LNID=44

  I hope this helps.

• Can cling to the blue SATA port on the Mobo for optical drive SATA HDD

  Studio XPS 435 t/9000 Office

  Service Tag:

  This box has the following motherboard in it.

  X501H Dell Studio XPS 9000 435 t LGA1366 Intel X 58 + ICH10R DDR3 motherboard series

  There are (5) SATA ports on the internal motherboard.

  
  SATA1, SATA2 - blue color Code, I (1) optical internal drive attached to the SATA1

  SATA3, SATA4, SATA5 - black color code, I (3) HARD drive connected 3,4,5

  The blue color SATA2 port is open

  Can I connect a 4th HDD SATA blue SATA2 port?

  Or are the blue SATA ports only for optical drives

  It will cause some problems if I hang a 4th HARD drive SATA2 port blue

  Hi rgadawg,.

  Welcome to the community.

  Blue SATA2 port must be compatible to connect to another hard drive. He should not ask any questions however, Studio XPS Installation Guide Page 57 under specifications says he has three bays for hard drives SATA 3.5 inch disk.

  http://Dell.to/YbYwib

  Thank you & best regards
  Mustapha S
  #iworkfordell

• What is the switch for automatic update of the Flash Player 11.2 on a silent install?

  This is for the installation of Flash Player silently(flash.exe-install). I'm looking for the switch that will activate the new installation automatically updated feature flash 11.2. I would like to deploy 11.2 flash with this feature enabled.

  In addition, adding the command line argument '-0 "will also allow the silent automatic update mechanism

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).

• the power cord of the ac for my iphone charger 6 will work in the USB port in the car for the load

  Looking for a car charger for my IPhone 6.  Wondering if the cable operator in the House will work in the USB port on a car?  It hurt my phone.

  Yes you can. As long as you have in the car's USB port. It can load more slowly then wall charger, but it works! I load mine in the car all the time

• What NAT ports in the firewall for VMware View Server Security?

  We have a Cisco ASA and I wonder what are the ports I need NAT from the outside to the Security Server?  I'm assuming that port 443, but don't know if this is correct or if maybe other ports must be open.

  Thank you!

  Brian

  This KB should help you, http://kb.vmware.com/kb/1027217.

• where to find the host, port, and the sid for a database in oracle 11g?

  Hello

  I'm a newbie DBA. Earlier I had one task of creating user in pre prod DBs. the user has requested the creation of user name and granting the required roles and provide TNS entries also.

  I created the user and granted the required roles. Now my confusion is to provide the TNS entries. Weather shud provide listener.ora and tnsnames.ora?

  Help, please.

  Weather shud provide listener.ora and tnsnames.ora?

  You will need to provide details of tnsnames.ora.

  Also read Help! I can & #8217; t connect to my database & #8230. Ed Stevens, s/n

  HTH

  Anand

• How to open the port 161 on the ASA and Cisco switches for monitoring of BB

  Dear all,

  I want to install BB to monitor snmptraps suffering of failure.

  The newspaper shows BB cannot connect to all ports of the switch 161, and I even can't telnet to 161 XXX_17f for example.

  My switches are Cisco C3550, C2950, etc. of the ASA.

  Mon 7 Nov 15:43:03 2011 bbnet cannot connect to the server XXX_17f on port 161

  Mon 7 Nov 15:43:03 2011 bbnet cannot connect to the server XXX_9f on port 161

  Mon 7 Nov 15:43:03 2011 bbnet can't connect to XXX server on port 161

  Thank you

  Anson

  no need to adjust anything in bb-hosts. If you have added setings in bb-hosts, delete them. Also remove associated in bbvar/logs log files. (otherwise, you'll have purple when you delete the SNMP, trap tags bb-hosts)

  A column of trap will be that no show until the device sends a trap to BB.

• Does anyone know the VpxClient for "Use Windows Credentials" command line switch?

  I found the VpxClient switches for server (-s), the user (-u) and password (-p), but I want to get my password on my shortcut. I would like to have the shortcut for

  "C:\Program Files (x 86) \VMware\Infrastructure\Virtual" s - Server w

  in fact lanuch the client without me clicking on something else. BTW, I composed the '-w '; It does not in fact. I need to know the switch for 'session credentials using Windows '.

  "C:\Program Files (x 86) \VMware\Infrastructure\Virtual" s - Server u user password Pei

  works great for an ESXi username, but I prefer to use my Windows credentials without password in the shortcut; and the work of shortcut for multiple users.

  Hello.

  You mean this?

  -passthroughAuth s vcenter.domain.dom

  Good luck!

• Best wireless network installation with the switch TP-Link

  Hi all

  Few question numpty maybe, but what follows... We just moved to a new (larger) home with thick walls and I want to set up a new wireless network.

  The current installation is:

  Fiber cable entering the House in the basement and connected the modem to the service provider that provides 150 mb internet. I changed the capacity wireless on the ISP's modem and connecting an airport extreme (2014 model) via the LAN to the modem. The extreme is in the office but on the 3rd floor is having connection problems than you can imagine. All rooms have access points CAT5e who all meet in the basement. I have two spare Aiport express and two Apple TV that I would use. Also I bought a TP-LINK 1000mbps (16 channels) Network Switch.

  Could someone please tell how the best set-up of my home network. For example, the Airport Express to the 3rd floor connected to the switch (wired) network or to an extreme in the Office? Apple TV also connected to the network switch?

  I would like to end up with a solid wireless network that passes without problem from extreme to Express necessary each time you walk and you want to use an Apple TV for television on the ground floor and one in our room.

  Many thanks and apologies once more for this very basic question... I have expanded my front (extreme Express) wireless network but just don't know how best to use the switch.

  Thank you

  The simplest up set... which is almost always the best game in place... would be to connect the switch 16 ports to the modem/router and then connect devices to the switch. In other words, if your modem/router has 16 + Ethernet ports, the simplest network configuration would be to plug as many devices as possible directly to the modem/router.

  Other variants are possible, for example, the network might look like this:

  Internet > Modem/Router > AirPort Extreme > switch > devices... or, you can connect certain devices to ports Ethernet on the AirPort Extreme and some to the ports on the switch.  One thing to keep in mind however... If there is a problem... Troubleshooting may not be easy since it will be difficult to know where the problem actually lies.  Much easier to all have, or of possible devices, connect to the switch.

  Unfortunately, the AirPort Express devices will be of real bottlenecks on your network.  These devices are notoriously slow as well as wireless, and even if they work well, the speed will be does not exceed 100 Mbps... since it's the speed of the port to the AirPort Express.  In fact, I expect each Express to provide a wireless signal in the range of 50-60 Mbps.

  Another thing to keep in mind of the wireless network is that Macs will usually a good work of tilting automatically to the point of wireless to the other as moving from one place to the other in the House... but the iPhones, iPads, PCs, and other mobile devices will do that very well... If they do at all.

  So with these devices, you will need to get used to temporarily disable the WiFi on the device and the device when you move in one region to the other, and then turn WiFi on must generally then pick up the signal from a nearby wireless access point.

• Modding administered a LGS326 - to THE switch to run from 12V DC supply.

  Hi all

  (Type this message again as the 'Preview' button has lost the original on me. Silly me thought 'Preview' meant "Show me what the message looks like" not "delete the message and show me a preview pane empty instead. My bad.  Edit: It would be because Linksys decided to spray on 50 domains JavaScript so NoScript says no.  What is wrong to put the JavaScript code on community.linksys.com with HTML code)?

  I'm implementing a cluster of virtual machines as an exercise in self-education. As an additional technical challenge, I design the system to run with 240V solar power backup. So ideally the whole system will have to run from 12V, coming from a battery of 100Ah. I'll expand on that later.

  Now, I did research the area and apart from some industrial switches which were mostly 100 Mbps and very expensive, there is almost no manageable offered 24 gigabit ports + held of the 12V. There is a possible market for Linksys. I don't need industrial design temperatures.

  After some research, I found myself buy a LGS326-UA, which runs the industry normally. It's 90% of what I'm after. 4 gal can do but I can work around that, it has sufficient capacity of VLAN for what I want.

  Out of curiosity, I cracked open box to see if it was possible to modify it to run from 12V. That's what I found: https://hackaday.io/project/10529/log/34622-modding-the-switch-for-12v-operation

  So the switch supports internally, 240V to 12V, then probably goes down after 3.3V / 5V. So certainly doable - warranty is not my concern here.

  I have a few regulators IDO (Micrel 29750) coming that should handle this. I probed around with a multimeter and can identify it seems to be a split of power supply 12 v on two pairs of drivers with non-standard color coding, so I'll have to move carefully, some tough filtering (a Bank of low ESR electrolytic) should do.

  Did anyone here tried a similar amendment before? All boards/traps to watch out for?

  (Edit to correct the really bad formatting.  Once more, in this world of vulnerabilities XSS, really should we spread the code 50 ways to Sunday?)

  Well, I did it.  For those who were wondering what the answer is, it should be a good starting point.  Essentially, the green/yellow wires are wires are the 0V and Red/Black + 12V.  They are parallel connections together, filled on both sides.  If you're unsure, you can check by returning the motherboard to the wire and looking for one of the pins on the electrolytic capacitors; the negative sides are marked, and you should find that there is a short to 0V on the negative side.

  

  Given there are a couple of supplies of switchmode step 12V down to the 5V and 3.3V, you are probably safe to go below 12V, I found myself using a small reg IDO, which keeps the power slightly lower at 12V and so far, the switch works fine.  No magic smoke yet. :-)

  The full project details are available here: https://hackaday.io/project/10529/log/36511-12v-regulator-installation

• Switch for BEFSR41?

  I use a BEFSR41 for a few years now and that you want to add an Apple TV, but I'm from ports. I'd be OK just get an additional switch to add additional ports? If so is there a recommnedation? Is there a limitation to the BEFSR41 using a switch where it might be wiser to get a router with more ports? If I go the way of the switch it just use one of my existing ports to connect?

  The router is version 4.1 and firmware 1.04.06

  Thank you.

  Any standard ethernet switch will do. There is no limitation. It makes no sense to get a router with more ports, unless you need a better router (for example, a faster internet connection). And even then, I wouldn't necessarily get a router with more ports. A switch is much more convenient because you can have some ports to the location of the router and some additional ports to the location of the switch reducing the total length of the cables needed.

  Connect one of the BEF LAN ports to the switch and that's it. So you have 'loose' two ports. In case you have one of the older models of the BEF who have an "uplink" port, do not forget that the uplink port and the port next to it are a shared port, that they connect internally on the same physical port. The uplink port is not an additional port.

  You should consider getting a gigabit ethernet switch. Although the BEF is not gigabit and your internet connection probably does not exceed the 100 Mbit/s, however, it may be worth it if you have multiple gigabit ethernet devices. Devices connected to the gigabit switch may be able to use the bandwidth increased for the transfer of files or similar. (The Apple TV doesn't have a gigabit port if...)