switchport autosate exclude

Similar Questions

• ESW-520-24 p not able to connect to a Catalyst 3560 G + compatible with SPA942?

  Hi all

  a customer bought an ESW-520-24 p for use in a VoIP project. Today we had difficulties to connect to a switch of 3650 G of catalyst; We tried to set the port to the trunk, general, customer and access and changed all sorts of settings VLAN on the 3560G switch nothing helps: the switches just interconnection used. While sniffing, we saw that the ARP requests are unresponsive even, if something is at a low level, no doubt with VLAN-ing.

  Someone at - it an idea if these switches must be connected between them and if so, what do I do?

  On the other hand; voice turns on VLANS separated and the customer will use SPA942 phones that have an internal switch that allows a PC to connect. I used this call successfully with the Catalyst Express switches and I didn't have to do anything for VLAN-ing, it worked 'out of the box. Can anyone confirm that these phones work with switches for small businesses as well?

  THX!

  Bart

  Hi Bart,.

  I quickly set up the simulation.  It took me more time to write this that actually do the work.

  I grabbed my handy Cisco 3560 catalyst switch.  I plugged port FastEthernet 23 plugged into my UC520.  My Uc520 is my voice system and the DHCP server.

  I have the 24 FastEthernet port connected to my Cisco 3560 in my ESW540 - 24 p.  On 3 of my ESW540 switch port - 24 p, I plugged a phone SPA962...

  I guess that my simulation is close enough to your hardware.  The configuration should be the same I guess.

  Here is the configuration of my Cisco 3560 switch;

  interface FastEthernet0/23

  switchport trunk encapsulation dot1q

  switchport autostate exclude

  switchport mode trunk

  !

  interface FastEthernet0/24

  switchport trunk encapsulation dot1q

  switchport autostate exclude

  switchport mode trunk

  interface Vlan1

  192.168.10.3 IP address 255.255.255.0

  !

  interface Vlan100 (VLAN100 ends on my UC520 and has the DHCP scope)

  no ip address

  !

  interface Vlan200

  no ip address

  !

  Check that the tree covering weight is not blocking the ports of uplink with the command show spanning tree. I ask you to try what I must admit that this uplink to my UC520 was in a BLK State on the VLAN by default.  I HAD TO CORRECT.

  I plugged my phone SPA962 on my ESW switch, it lit.

  VLAN 100 as my voice VLAN, I had to set manually what VLAN the SPA phone will reside in.  Otherwise, it will try to retrieve a default IP VLAN.

  • I have manually by pressing the button (below the button of the envelope) on the phone in the SPA
  • Scroll down and select 'network '.
  • Scroll again option VLAN and select Edit.
  • I changed the setting to select Enable VLAN Yes.
  • Click the OK button.
  • I then scroll down to the option VLAN ID.
  • Choose the edit button to change the VLAN ID information
  • I register 100 to and selected OK.

  My phone has received an IP address from my 100 VLAN address 10.1.1.X.

  Fortunately, the ESW520 has a pretty good GUI, in which case you can add a new vlan and the trunk at all ports.

  Here's an example of how I added the vlan 200 to the ESW switch and started adding the Tagged ports switch ports.  I have to do all the ports where you need a VLAN.

  

  I then as seen below my new adds VLAN as a port Tagged to all ports of the switch.

  You can see from my screenshot below I was adding VLAN 200 to interface G2 as labeled interface.

  

  Don't forget NOT to SAVE YOUR CONFIGURATIONS ON BOTH THE 3560 and the ESW520

  

  hope this helps

  Best regards, Dave

• can iCloud Documents sync - I exclude this directories?

  Is it possible to exclude some files/directories of this?  I think especially in defence of apps 3rd stuff left in Documents that may not work on more than one Mac.

  • Microsoft Office binary data files
  • Other applications that store binary files, license files, encrypted files using something specific to the machine like salt, etc.
  • Game save files
  • Images of the Virtual Machine in Parallels Desktop or VMWare Fusion (previously, copying the files manually to a new machine generating warnings.

  You ask what you are is well above my knowledge.  Maybe if join you Apple Support to find answers to these questions.

• Cam nest excluded Homekit?

  I can only assume, because of the competitive relationship between Apple and Google, but I'm really disappointed to see that the family of nest products is excluded from Homekit.

  Stupid decision, because I do not know that I am not alone to already incorporate the nest in my house and using the app to nest on my phone.  I guess they wanted to be sure that homekit was completely irrelevant for me...

  Google and nest products are in direct competition with Apple and their proprietary Home Kit.  Google paid $3 .2b for nest laboratories and has used to launch Google home.  Completely secure communication protocols different use of two technologies, so are not inherently compatible and nest will be redesigned specifically to be. Google doesn't want you to use the nest with home kit - they want to you use the nest with their system.  Time will tell which competitor wins in the end.

• How to exclude the songs, didn't like in a smart playlist

  How exclude the songs didn't like in a smart playlist.

  Note the songs that you don't like as 1 Star then add side is not 1 star smart selection criteria.

• Finder search exclude messages

  Over the years, I did three or four serious attempts to update to snow leopard, but came back each time.  This time I am El Cap. on a partition but I see the finder search is still contaminated by the archaic messaging objects.  Were there no progress in a method to exclude a finder search without disabling the search in the Mail mail app.

  Please, please, please...

  Please use the Apple Support communities, ox-cart!

  It seems that you are willing to search for items on your Mac without getting an overabundance of e-mail in the list. I'll be happy to help you.

  What I found is that you can add 'gender' of items that you want to exclude specifically. At the end of your search, add '-kind: mail» When I used this addition, my research documents showed on my Mac which contained my search criteria and excluded emails from the list provided.

  OS X El Capitan: limiting the scope of your research

  I hope this helps.

• Should I back up Thunderbird cache files or can I exclude them?

  I do a daily external offsite backup of my records. Can I exclude files cache of Thunderbird as being unnecessary for the restoration of the TB profile folder?

  Using Windows7

  Yes, you don't need to save cache files.

• Conditions may be excluded research of the add-on?

  I want to search an add-on from Google that has nothing to do with the image or the translation. When I type these terms as - image and - translate, I always get results for those terms. Is there a a way to refine a search by excluding terms? Thanks in advance.

  You cannot use the search parameters if you use the search bar on Firefox tools > Modules > page Extensions.
  This is only possible if you search through the site www.google.com .

• Cookies should exclude from the deletion of LSO Better Privacy addon?

  I want to install the addon Better Privacy. In your discussion, you point to the frequently asked questions for warnings on the erasure of large cookies. I couldn't see this addressed in the FAQ. Which cookies should be excluded from the deletion of LSO? Help, please. Sorry not a computer person! Thank you.

  Sorry, do you remember what FAQ is that you have read? Could you give a link to it?

  Cookies are normally at your convenience by having Web sites remember you and your preferences. If rinse you your cookies every day, usually the worse thing that could happen is that you must always connect to sites, and if the site saves your preferences in a cookie, you get the standard default site settings rather than you saved your custom settings.

  There are some cookies that are a pain to re - create. For example, online banking sites often you will need to enter a code that you have received a text message or fill another challenge. If you do not keep this cookie, you will need to fill the extra step every time.

  LSO flash can be used for similar purposes and more. Some sites may use the data as your place in a game.

  I guess what I'm saying is, there is no way for us to know what is in your cookies and how important it can be to you. We could provide only general guidance on what offers the best compatibility of site (keep the cookies) relative to the protection of personal information (clear cookies) and maybe a good balance to preserve your sanity.

• Can what files I exclude from Time Machine backups?

  I use Firefox on OS X Mavericks. I use Time Machine to back up this computer. I know that Time Machine avoid automatically save my web cache. But which of the files in my directory profile I can't back up? I am particularly interested in the webappstore.sqlite, cookies.sqlite and healthreport.sqlite since they are on the larger end and seem to change frequently.

  I have already excluded bookmarkbackups and places.sqlite. I have the browser the value automatically export my favorites so if I need to restore my computer I'll revisit my favorites but not my browsing history, that seems reasonable.

  What type of data is useful for you?

  A reset for example keeps personal data such as bookmarks (places.sqlite, JSON safeguards), history (places.sqlite), biscuits (cookies.sqlite), (signons.sqlite and key3db) passwords, form data (formhistory.sqlite), open tabs (sessionstore.js)

  See the following articles on the file information:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• Manual backup Parallels virtual machine - how to exclude folders?

  Can't find an answer.

  I want to exclude certain folders when you do a manual Virtual Machine backup Parallels.

  There are thousands of responses but all backups on Mr. time.

  And since I had a crash when restoring a virtual of TM machine I won't use.

  I have no problem with manual backups.

  But since my photo file is about 100 GB and I don't change anything

  often, in this case, I want to exclude from the backup of file that records everything.

  Greateful for any suspicion.

  Can you clarify, you try to back up only via Parallels

  or try you backup via Time Machine and want to exclude a folder?

  If this last, go preferences of Time Machine and choose your folders to exclude

  

  If you only back up Parallels see here

  http://KB.parallels.com/en/4859

  or here

  http://KB.parallels.com/en/8827

  - - - -

  Your mileage may vary.   All advice is based on my experience.   I bought a shareware/commercial software in any given notice and have no financial interest in all of the mentioned products.

• How to exclude software is inaccessible from SDM

  I'm trying to remove some software, we don't use SDM so that it never installed on any computers screw SSM.

  Examples: HP protect tools, McAfee Total Protection ect. Face recognition software (our laptops don't have webcams) Manager software, Hp support and many other things.

  I can't find a way to get rid of it or can download them.

  I tried to simply delete the folders. but it just comes back.

  What are the steps to uninstall SDM, so SSM installs ever?

  Currently, it has no feature in SDM which excludes software be available from SDM.
  
  Would not hurt to write an email detailing how you would consider such a feature to work to support the implementation of SDM SDM team.

• Exclude specific 'face' of the smart album?

  Is it possible to create a smart album that includes pictures of several people (using 'faces'), but not pictures which may include a specific other person who may appear in some of these photos. For example, I would a smart album that includes all the photos of my brother, sister and parents (using 'faces'), but excludes all the photos that include the 1st wife of my brother.

  David

  I think that you'll just have to put in place of the rules in the process of creating smart albums.

  There is a rule for faces to create smart albums. You can use the "Add rule" button in the upper right of the dialog box to create a Smart Album. You will need to add a rule by individual faces. With faces, there is a 'is' and the option 'is not. The order could play a factor in the execution of the rules so try putting the old sis in law first or last. If all goes well, one of those who will work.

  Good luck

  PS. you might want to try first with a single inclusion and exclusion. If it works, continue to add more inclusions you govern together.

• is it possible that a battery for a 2012 Macbook Pro replacement could cost $400 excluding work? It seems punitive.

  Is it possible that replacing the battery in my MacBook Pro 2012 will cost me $400 excluding work? This seems downright punitive.

  Indeed, it is, but as it is not correct do need to get excited.

  It is less than $200, including labor.

• Excluding backups Snapshots

  Hi all

  I'm still buying a 516 for a customer, but am I right assuming that snapshots are automatically excluded from backups made on external media (USB or peripheral sister SIN)?

  Thank you...

  steveoelliott wrote:

  I'm still buying a 516 for a customer, but am I right assuming that snapshots are automatically excluded from backups made on external media (USB or peripheral sister SIN)?

  Yes.