Bootcamp AMD update / update of GPU said always up to date.

Similar Questions

• Bootcamp AMD update - 5 k retina (end of 2015)

  Hello

  Sorry for my English, I'm French.

  I use Bootcamp (10 Windows) on my iMac 5 k retina (end of 2015) - M395X 4 GB

  However I very late version updated the graphics card, and what was my unpleasant surprise that means Apple...

  Update Windows AMD Catalyst banned...

  What will be the drivers for the card from AMD will be updated? Who update frequency for the drivers?

  Thank you!

  FWIW, when or if driver updates is at the discretion of Apple. Here nobody.

• said always invalid extra data?

  Hello BB NDK devs.

  Said the structure provided by the libraries of BB C is documented as having data statistics stored in the data, accessible and iteratable via:

  for (dirent_extra * extra = _DEXTRA_FIRST (dp); _DEXTRA_VALID (extra, dp)); extra = _DEXTRA_NEXT (extra))

  {

  ////

  }

  However, _DEXTRA_FIRST never returns a valid additional block.

  These are not implemented in QNX BB? Or something special to enable them?

  Thank you!

  Have you activated the info extra stat?

  I added the following to HelloWorldDisplay after the init() in main():

  DIR * dir = opendir(".");
  If (dir! = 0)
  {
  printf("yay!\n");
  int rc = dircntl (dir, D_GETFLAG);
  If (rc! = - 1).
  {
  If (rc & D_FLAG_STAT)
  {
  printf ("servers ARE asked info\n extra stat");
  }
  on the other
  {
  printf ("servers are NOT charged additional state information.  Enabling...\n");
  RC = dircntl (dir, D_SETFLAG, D_FLAG_STAT);
  If (rc == - 1).
  {
  printf ("... to enable failed\n");
  }
  on the other
  {
  printf ("... to enable succeeded\n");
  }
  }
  }

  struct said * input = 0;
  int count = 0;
  While ((entry = readdir (dir))! = 0)
  {
  ++ count;
  printf ("Yay!  Directory found %s\n", entry-> d_name);
  fflush (stdout);
  struct dirent_extra * extra = (entry) _DEXTRA_FIRST;
  If (extra! = 0)
  {
  printf ("Yay! Extra! \n ») ;
  for (;  _DEXTRA_VALID (extra, entry); extra = _DEXTRA_NEXT (extra))
  {
  printf ("...%d byte n additional %s", extra-> d_datalen, (extra-> d_datalen == 1)?) "" : "s");
  }
  }
  on the other
  printf ("Boo! No extra. \n ») ;
  }
  printf ("%d man %s found.", count, (count == 1)?) « y » : « s ») ;
  closedir (dir);
  }
  on the other
  {
  printf("Boo!\n");
  }
  fflush (stdout);

  This gives the following trace:

  Yay!
  Servers are NOT required for additional state info.  Which allows...
  .. .enable managed
  Yay!  found the directory.
  Yay! Extra!
  ... 72 bytes of additional data
  Yay!  found the directory...
  Yay! Extra!
  ... 72 bytes of additional data
  Yay!  find the directory data
  Yay! Extra!
  ... 72 bytes of additional data
  Yay!  found the tmp directory
  Yay! Extra!
  ... 72 bytes of additional data
  Yay!  found the logs directory
  Yay! Extra!
  ... 72 bytes of additional data
  Yay!  found the pps directory
  Yay! Extra!
  Yay!  found the db directory
  Yay! Extra!
  Yay!  found the shared directory
  Yay! Extra!
  Yay!  found the app directory
  Yay! Extra!
  9 records found.

  Stuart

• My watermark came before I did the recent update on CC 2015, always when I would export to PhotoShelter.  Now, the watermark does not appear.  I asked PhotoShelter for help and they said they have heard about other problems.  How ca

  My watermark came before I did the recent update on CC 2015, always when I would export to PhotoShelter.  Now, the watermark does not appear.  I asked PhotoShelter for help and they said they have heard about other problems.  How can I solve this?  Nothing has changed on my computer.  Thank you.

  Sharon Cameron

  Hi sharonc,

  Have you tried to reinstall the plugin Photoshelter for Lightroom CC newer version 2015.

  See the below for the upgrade to the latest Version

  https://support.PhotoShelter.com/HC/en-us/articles/203373590-PhotoShelter-s-official-Adobe - Lightroom-Plugin

  Let us know if that helps.

  Kind regards

  ~ Mohit

• 4K @ 60 Hz fichier_ecriture deleted on the bootcamp driver update?

  Hello, I currently have a 2015 Macbook pro with a M370x AMD 10 under bootcamp with the graphics driver 6.0 Windows Update installled.

  I am running a LG 27UD68-P on the mini display port with an adapter Club3D HDMI 2.0.

  This will run out 4K @ 60 Hz very well on Mac OS X and same bootcamp without updating to 6.0 graphics driver was last updated.

  Now that I've updated, my refresh rate is only limited to 30 hz, even if AMD Radeon is the maximum resolution supported and the refresh rate is 60 Hz 4K.

  I've updated the graphics card drivers previously using the method of unofficial workaround for the AMD driver version, but I re-installed Windows since then and you just want to know if it is possible with the latest updated version? If this is not the case, what would be the next driver update be scheduled for possibly?

  Thank you.

  No one on the CSA can provide you with a date.

• After installing the last "Update Agent" I can always get updates for Windows 7 Home Premium?

  After installing the last "Update Agent" can't always updated for

  Windows 7 Home Premium?  After 2 days in dealing with this problem, I came to help?

  Someone please give me an answer!

  E-mail address is removed from the privacy *.

  Hello

  Please contact the Microsoft community.

  As you said that you are not able to get new updates of windows on the computer.

  I would like to ask some questions about your request:

  1. When was the last time that you install the windows desktop update?

  2. You receive an error message from the updates?

  3. You use any third-party antivirus on the computer?

  4. Did you do any change on your computer before the show?

  Please refer to the reference to the link below for " " " The problems with installing updates".

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Please get back to us with the information in short so that we can help you further.

• I've just updated to a since a XP2 XP3. I'm always up to date. (error 0 x 643)

  original title: I've just updated to a since a XP2 XP3. I'm always up to date.

  My current problem is a 0 x 643, when you try to upgrade to KB110806. I just worked around a SRX1158966073ID.

  Any help would be appreciated.

  A KB976982 has been created to resolve corruption issues MSI software update registration automatically, the KB includes an automated Microsoft Fix it 50123 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/976982>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50123.msi.

  `~`

  http://support.Microsoft.com/kb/943144/en-us> can help in case used to install updates and you have repaired/installed Windows on an existing Windows System.

  It probably won't be your solution, but it is easy and does not hurt to try.

  07:43:1208/01/11

• I can't check the updates, because he said that "the service does not work."

  I can't check the updates, because he said that "the service does not work."

  Error: Windows Update cannot check the updates, because the Service is not running
  http://support.Microsoft.com/kb/2730071

• Windows update error 8007007F said. When I tried to download whatever it is, including the "Fix it" or repair of Microsoft I have error-1073741701

  Windows update error 8007007F said. When I tried to download whatever it is, including the "Fix it" or repair of Microsoft I have error-1073741701. I can't change my clock, I can't download anything.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I have the version of Lightroom 6 buy. I uninstalled and reinstalled. But now I can't update. Need me always to Adobe Creative cloud, which I did not. How can I do?

  I have the version of Lightroom 6 buy. I uninstalled and reinstalled. But now I can't update. Need me always to Adobe Creative cloud, which I did not. How can I do?

  At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

  I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• try to follow the tutorial of Muse to apply a store online, downloaded lesson files will not open, but an alert says my version of Muse needs update. The function of update in Muse said that my version is the most recent; 2014.3

  try to follow the tutorial of Muse to apply a store online, downloaded lesson files will not open, but an alert says my version of Muse needs update. The function of update in Muse said that my version is the most recent; 2014.3!

  I expect that you use OS X 10.8 or earlier? Muse 2015.0 and later requires OS X 10.9 or higher.

• Open CC app, said installation up-to-date, but crashes to zero, is not updated.

  Open CC app, said installation up-to-date, but crashes to zero, is not updated. Have rebooted, turned off the virus apps, but am not expert level. Windows 8.1.  Thank you!

  Hi Mark,

  Please, try the following steps:

  (1) uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  (2) restart the machine.

  (3) install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Reference: https://helpx.adobe.com/creative-cloud/kb/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• My account was canceled in one CC has expired.  I've updated Sunday, he said 24 hours for reactivation, it's Tuesday today ' today - still not activated.  Can someone please verify this?

  My account was canceled in one CC has expired.  I've updated Sunday, he said 24 hours for reactivation, it's Tuesday today ' today - still not activated.  Can someone please verify this?

  Thank you

  Jeff.

  Jeff I sent you a private message,

  Please follow that.

• I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

  I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• Display Bootcamp AMD drivers

  I have an end 2014 27 "iMac 5K and 10 installed via Bootcamp windows.

  The only reason I installed is to play a game, war Thunder. The game plays sort of OK, but could be much better if we could independently

  Update the video card drivers ourselves.

  When I want to update, it gives me the message.

  "NO AMD TAKEN IN CHARGE OR FOUND MATERIAL".

  Why is this not possible or authorized?

  And why Apple provides updates via bootcamp update?

  It seems that sometimes they don't care or don't give a * & % $.

  Seriously, the last time you updated was September of last year.

  Someone at - there a way to do it?

  My card is a Radeon R9 M290X AMD

  Thank you.

  C

  I use the drivers in the file zip of the bootcamp driver and nothing else

  any attempt to let windows update to replace have always resulted them in a roll back because of crash or poor performance and

  get the drivers from amd never works