Symbol Commander is installed on the Portege M400?

Similar Questions

• Impossible to install Vista on Portege M400 - not compatible with ACPI

  Hello

  I have a toshiba portege m400.
  It has windows xp professional installed SP3 (the former owner he replaced with that of the xp tablet edition - I want to upgrade to vista so I can have the capabilities of the rear shelf!)

  In any case, I have a vista version - a version upgrade Home premium.
  When I try to install it it comes up with the error:

  +' This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed on a computer that supports ACPI. Contact the manufacturer of your computer for an update of the BIOS, or install Windows on an ACPI compatible computer. " +

  When I try to boot from the cd it gets up to when I type in the product key, but then he tells me I have to run this from my current operating system.

  I tried to update the BIOS (it is currently 1.8 and I heard vista needs 2.0 at least). I tried to install the latest driver from the Web from Toshiba - BIOS version 3.2.8 site but it says "this computer is not supported" even if I went through the procedure of choice of type of my laptop and spec and the pilot came on his list.
  Now I'm pulling my hair out.

  Can someone help me please!
  Would be to get a full version of vista (not an upgrade version) work and boot from the cd because it seemed to go further like this?

  Thank you!

  Hi guys

  I think I know how you will be able to update the BIOS

  I read here in the forum that in very rare cases, you have the Toshiba preinstalled OS in order to update the BIOS
  So in my opinion, you will be able to update the BIOS if install you the operating system from the Toshiba recovery disc.
  After installation try to update the BIOS

  After the BIOS has been updated you could install the new Vista

  See you soon

• Can I use the M200 with the Portege M400 Dockingstation?

  Or is there another solution that is also used in tabletmode?

  Or is it possible to use dockingstation to the M200 with the M400 without the feature?
  I just need to position the Tablet for easy painting.

  Thank you all

  What docking station do you mean exactly?
  There are different stations that could be used with the Portege M200 from home

• BIOS update solved the Portege M400 fan noise

  The new version of BIOS (1.8) for Portege M400 solves the problem of fan noise. The Readme.txt explains that the temperature will rise only in three degrees. Very important, very recommended patch for users of M400.

  Now I can use my tablet in my business meetings without having to give explanations to customers of the fan noise.

  Greetings.

  Hello Jose

  It is very nice to hear that you are happy now. I read your previous assignments and I can understand you this annoying issue with cooling fan, but now you can see this laptop manufacturer is trying to make the product better, even if the product is on the market.

  I am also certain that customer s comments can help identify the problem if persist und after this systematic search for the solution or change for the better.

• Cannot install Modem the Portege 2000

  Help! I manually installed Windows XP and now I can't install my modem on Portege 2000. What is going on?

  I had this same problem come when I installed Windows 98 on my protégé. During the installation of the operating system that you will get a yellow question mark in Device Manager when you install the modem before applying the audio driver "Reg-Files. For Windows 98, I had double click on Aliid98.reg in the folder for the audio driver on the CD T & D to add information about the modem driver. For Windows XP and Windows 2000, I think that you need to double click on Aliid.reg in the folder for the audio driver on the T & D CD to add the information to the modem driver. Let me know if it works!

• White screen to update the Portege M400 firmware after waking from sleep state

  Why this topic has been closed? http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19803&MessageID=74193

  I just wanted to add that this update does NOT resolve the problem in vista and it is NOT a driver problem. The update will not install in vista and vista is already provided with videoprt.sys 5.1.2600.2911.

  When it occurs, the laptop again indeed. You can manipulate and even hear the sounds, but the backlight does not come on or there is no output from the video card. I'm fairly certain that it is a signal of hardware problem.

  No matter what laptop I, euro or us, could someone please tell me the file so that I can look at what changes actually code?

  Hello

  > Why this thread has been closed?
  I think that the admin closed this thread because, as indicated by the user lumix2day the MS update has solved this problem.

  The M400 was delivered with Win XP it's why the update should work with Windows XP!

  Regarding your question.
  Looks like you are using your own copy of Vista on the M400.
  You should check if Vista is already up to date. Each week the new MS updates are published.

  Additinally, I recommend updating the BIOS and check for a driver update more recent display!

  Best regards

• Touch screen does not work on the old Portege M400

  I'm trying to restore an old Toshiba Portege M400. I have WIN XP Tablet 2005 installed and which, according to me, are all the drivers. Everything works perfectly except the touch screen.

  I've been all over the web, downloaded and installed some drivers WACOM Vigneau suggested in another thread here - still no luck.

  Anyone have any ideas or experience on how to solve this problem?

  > I would not be able to use my fingernail or or a pencil eraser to type with (I don't have any kind of pen) just to test?

  To my knowledge, you have the pen in order to use the touch screen.
  As far as I know there are two pens in the portege M400.
  The reserve pen located at the bottom of the unit that there should be a slot that the second pen.

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards

• Portege M400: Is it possible to use the resolution 1400 x 1050 on external monitor?

  The Portege M400 SXVGA (i.e. 1400 x 1050) can support 1400 x 1050 via analog / external monitor? I ask this question because I can't do! Most importantly, he is happy to provide, even if the monitor is a TFT 1400 x 1050 screen is 1280 x 1024.

  I downloaded the latest Intel drivers and screen drivers, and although the o/s reports screen as being happy to show 1400 x 1024, it is not an option when selecting the resolutions.

  Is this a known issue?
  It is corrected using digital?
  Am I stupid?

  Hello

  I'm not 100% sure but I think that that it will not support a higher resolution. In my opinion, it is according to the performance of the graphics card and the resolutions supported and not according to the used port.

• How can I activate the IrDA on Portege M400?

  I can't seem to find how to turn on infrared on my m400. Can anyone help please?

  Kate

  Hi, Kate

  As much as I know the IrDA is not available on the Portege M400, so you will not be able to activate this function.
  If you want you can use an external solution as a key USB IrDA

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Windows 7 on Portege M400

  Hallo,
  is it possible to install Win 7 on the Portege M400? There is Windows XP on the laptop.

  I'm German, excuse my bad English please.

  Many greetings
  Lobbie

  Theoretically yes but the question is: is this model of laptop taken in charge for Win7?
  Have you checked archive of drivers?

  You can do so under the http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Is a lot of Vista drivers can be used with Win7, then you can try installing the Vista drivers.

• Portege M400 keeps freezing

  I recently bought a Portege M400 and it completely freezes and requires a hard reboot at least once per day - any ideas on how to solve this problem?

  Hello

  You use the image of the preinstalled Toshiba or you manually installed the OS?
  Do you use the 3rd party software?

  I don't know if it is useful, but sometimes a high temperature could be responsible for the laptop computer from freezing.
  In most cases the cooling modules may not work properly due to the circulation of air is bad.
  Please remember that you have enough space around the laptop and the fans are clean.

  In addition, you can check the standby power settings that allow you to change the processor, the speed of processing and cooling method.

  If this does not help so I recommend asking for extra help Toshiba service partner and diagnosis.
  I assumed that the Portege M400 is a new unit and of the guarantee must be valid.

• Installing Windows XP on M400 without original CD and floppy drive!

  Hello
  I bought the Portege M400 without any CD, only with the product key. IAM having difficultied install Windows XP SP2 from 2005 tablet edition while he asks driver Sata.

  I managed to create the installation with the driver (ts3raidx.exe kr10i.sys) disc for installation can see the hard drive and the first step of the installation is successful.

  But after the first reboot Iam to STOP message 0x0000007B (apparently Inaccessible Boot Device - of the means, but I can not see the message).

  IAM not sure about a few thinks:
  (1) the exact model of my laptop. At the bottom is only the label Toshiba Portege M400. But I have CPU T5600 1, 66 GHz (or 5500 do not know now) that I can't find in any specifications so Iam not sure if Iam using the correct Sata driver.

  (2) the way I've included pilot in the installation of Windows XP. I did it according to this article http://www.pcstats.com/articleview.cfm?articleid=1703&page=1 but ignoring things of unattended Setup.

  I have also tried Kr10n driver, but it does not at all. First step of the installation has not been successful. The drive cannot be seen.

  Could someone help me please?
  Download the original installation CD of anywhere?

  Thank you very much!

  Petr Varadinov (CZE)

  You n t need the SATA drivers but the RAID drivers!
  The Portege M400 PPM40E supports RAID functionality and you must install the RAID drivers first, before you continue the installation of XP!

  The RAID drivers might be installed from external FDD USB drive connected. The Vista operating system allows the installation of the USB!

  The RAID drivers must be published on the page of Toshiba. To take it!