Cannot install Modem the Portege 2000

Similar Questions

• Update of disk with the Portege 2000

  First Post! I am the proud owner of gently used Portege 2000.

  Browsed the web trying to find out if the Portege 2000 will be one hard disk other than the MK2003GAH. I have a MK4004GAH, but when installed it does not seem to be detected, the BIOS reports no HDD installed. The reader might be deffective of course, but I have nothing else to connect to and of course I can't test it because it is not detected.

  In addition, the 2000 does not use standard PC100 SODIMM? When I removed the RAM cover, it does not resemble a standard SODIMM slot.

  Thank you guys

  -max

  Hello

  I no a lot of experience with this Portege, but I can just confirm that this laptop comes with 1.8 inch Toshiba MK2003GAH HARD drive. I don't really know which are hard are compatible with this model of laptop but maybe partner allowed in your country can give you precise information on this subject. They are specialized for the upgrade of the laptop.

  On the module of RAM I found information that the Portege can manage with 512 MB max and module compatible memory PC133 256 MB - PA3158U - 1 M 25.

• The Portege 2000 via PXE - LAN operating system reinstallation

  Hello again,

  So as said before I'm trying to reinstall Win XP from the recovery provided CD.
  In fact, I have 4 CD: one that contains only Windows 2000 Pro and 3 CD containing Windows 2000 and Windows XP Pro. Of course, the 4 CDs were shipped with the computer.

  I tried via the floppy and CD-ROM drive that does not work (see previous section), but I also tried via PXE - LAN.
  So I installed a trial version of Windows Server 2003 in 3 months on my desktop and ran the RIS (Remote Installation Service).

  1. He accepted the CD Windows 2000 Professional as a CD of Windows Setup, but when you launch the Portege 2000, after some time, when he looks for the configuration of the computer, I get an error message that the driver for the network card is missing and it may not all go further.

  2. when I run the installation remotely with CD 1 of 3, it does not even recognize as a Windows CD of Installation!

  So, I managed to install a Win XP Family Edition that I run normally on my desktop, but I don't have any driver installed (WIFI, infrared, sound card, etc.) but also, I have only 1 license for the home edition.

  Someone at - it an idea on how to proceed with this method (I mean with the 3 CDs)?

  Thank you very much.

  Hello

  > Has anyone at - it an idea on how to proceed with this method - I mean with the 3 CD
  Do you mean the Toshiba recovery CD?

  I never tried to recover the image of Toshiba via RIS, but in my opinion that RIS does not recognize the 3 as a Windows CD of Installation CD1 because the recovery CD Toshiba image isn't really a Windows CD of Installation!

  The restore CD contains only the image files. To my knowledge these are ghost files

• get error 0 x code 80300001 windows cannot install on the specified location

  try to install vista on a new hard drive on my computer laptop hp dv6810, but get the error code 0 x 80300001. Windows cannot install to the specified location.

  the installation program recognizes my hard drive, we'll format me and partition but will not be installed. im not that well informed about computers then be simple and detailed with your answer. Thank you.

  Hello

  (1) you are able to change the settings in the BIOS?

  Check the below link that can help you in the matter of fixing.

  http://support.Microsoft.com/kb/925481

  Also to ensure that material supports the installation of Windows Vista on your computer.

  Hope this information helps.

• Error: "Windows cannot install to the selected location. Error: 0 x 80300001. »

  When I try to install Windows 7 on my Toshiba computer formatted I get this error message after trying to install the RAID driver during the installation process:

  "Windows cannot install to the selected location. "Error: 0 x 80300001.

  I'm unable to proceed with the installation. Can someone please?

  Hi Jon,

  This error can occur during a clean Windows 7 install the operating system installation media is not in the drive. This happens usually when a user is necessary for the exchange of discs in order to install the necessary drivers on the system and the operating system disks were not placed in the drive before proceeding with the installation.

  The error would not occur if the Setup program has been started using a USB key as stable media would not be switched.
   
  The solution would be to change the driver CD or DVD of Windows 7 install DVD media when this happens, then we can continue with the installation of Windows 7. In this particular case, it is likely that the RAID driver disk has been left in the drive.

  Note: This problem/error appeared less in Windows Vista since a message asking to specify the installation media usually as follows:

  "Please insert the disc 1 installation of Windows.

  Dan

• Cannot install to the root path, try to install photoshop CC on d ' training

  I'm changing my default on my d drive and it keep the message cannot install to the root path, how can I solve this problem?

  install on a non-removable drive.

• Error IDE #0 the Portege 2000

  First of all, sorry my bad English
  I send this error a while ago, but 2 days ago, I do retest and I want to know if with this new information, anyone has any new ideas.
  I have a 1'8 "hd giving 'IDE #0 error' ' with my portege 2000 but if I put with and adapter IDE in a standard PC, it works without problem, the only thing I see strange is that in a standard PC 1'8 ' HD as a slave not appear as master, I found the documentation for this type of hard drive that shows me jumpers I should use to configure the slave mode master hd and without" riders (as I connect to my portege 2000 and my adapter) it must be master, so I think that thar "IDE #0 error" appears because than the hd (I don't know why) was detected as slave without any reason... everything has an idea...

  I have a second question, after I installed xp sp2, I have install all drivers for Toshiba but hardware/system show an exclamation (driver issue) on "diskette controller" and I try to install common modules with different version but I can not, can someone help me

  Thank you

  Hello Gleoelo

  Almost 2.5 months looking for help. This is the forum of users and chances to have a detailed response to this technical problem are not so big. Portege 2000 is portable to very sensitive design and I really don't think there are that many users have experiences with this model of laptop.

  Why don't you contact technicians. I really think you need professional help. With the installation of the OS I think you should try to install SP1 and Windows XP Home edition with SP2. After the operating system and any installation of Toshiba stuff, you can install SP2.

  Is this Portege laptop and I am sure that it was preinstalled with SP1.

• Start the Portege 2000 SD

  Anyone know if it is possible start of SD in a Portege 2000.
  I don't have a DVD USB, I don't have a USB floppy, when I want to reinstall OS I take 1'8 "hard drive and my adapter for the IDE and reinstall the SO in another computer, but it's not comfortable."

  It was fantastic if I could boot from and 2/4 GB SD memory with an iso or image and fast recovery from my computer norton portable operating system.

  Can someone help me? Thank you

  Hello

  As much as I know something like this is not possible. I'm sorry. You must use other methods for installing the OS. Copy WXP on the second partition, install it from there, and after doing this installation drivers download them all separately from Toshiba support page http://eu.computers.toshiba-europe.com

• Reinstalling OS the Portege 2000 with IDE CD-ROMs

  Hello

  Recently, I got my father a Portege 2000 (purchased at the Japan if it makes a difference) on which I am trying to reinstall Win XP from the provided recovery CD (there are 3 CD containing Windows XP Pro and Win 2000).

  "I'm doing it with a USB FDD and Sony CRX75A CD-Rom PCMCIA that connects to the computer via a different manufacture PC Card ACR - A01 switchable between 16-bit and CardBus mode.)

  As I'm not very familiar with BACK, CardBus and start-up stuff, I read a lot of topics and found the following application, BootdiskP2000.EXE that contains drivers for PCMCIA and USB Toshiba CD-ROM cards. Then I ran and when the choice of CD PCMCIA external drive in the menu, I got the following:

  PC Card driver for external Rev:2203 of the ATAPI-IDE drives
  PCCARD found: IO DATA CBIDE2 V4.1
  ERROR: There is no PCCARD in socket A and B!
  PCCARD not initialized!

  So I searched the web for pilots BACK my ACR - A01 and found DUAOTA16. SYS and DUOATACD. SYS. Then, I changed my CONFIG. SYS (even when perhaps not properly as I'm not comfortable with it) by the addition of a menuitem and further:

  [SONY]
  DEVICE = A:\DUOATA16. SYS
  DEVICE = A:\DUOATACD. SYS D:TOSCD001
  When it works, I get the following:
  DuoATA16 CS Client Driver Version 1.01
  Copyright...
  CBIDE2: Not found CardServices.
  Driver is not installed.
  DuoATACD CD-ROM Driver Version 1.06
  Copyright...
  IDECD: No CBIDE2 card configuration.
  CD drive is not installed.

  If having a glance at HISTORY. TXT file from the startup disk, at the end it says: "If you use it with other CD-ROM, you must modify/change normally the driver CD-ROM (for example Toscdrom.sys - file!). and the driver, on which you have access to the card PCMCIA (Fcatapi.sys and FCPoint.exe). "but I have no idea with what I would have to replace it.

  Last point, my BIOS settings on page 2 are: device Config. = all devices that allows me to set the PC CARD controller Mode = CardBus/16-bit and by the way the CD manufacturing onther used to work fine with the Portege but with a Win XP driver.

  Someone has an idea of what's going on here, because I'm confused. Thank you very much!!!

  PS I also tried to boot using PXE - LAN to a PC running Win Server 2003 but that doesn't work either, but I'm going to start a new topic for it.

  And why Don t you try maybe a USB-DVD-ROM? A USB key will be recognized for sure. I installed a XP Pro with a USB-DVD-ROM on my Portege R200.

  Welcome them

• How to reset the password for starting the Portege 2000

  Hello!

  I want to reset password boot on old laptop Toshiba Portege 2000.
  (please turn on and write the password =)

  I agree with the user above; the BIOS password can be removed by Toshiba ASP in your country!

  It is a kind of security which can be removed if you are a true owner of this laptop.

  Therefore, you will need to contact the ASP to get rid of this password

• Windows Update says I need 53 updates, yet he cannot install even the premiera.

  I've lightened up to the os disk space and scanned several times for malware (Microsoft Security comes always too clean). I took it to a repair guy and it didn't fix it! When Microsoft Security try to update, it cannot, and when the Windows Update Web page is trying to update, it can also.

  Even when I try to install updated myself one, it fails.

  (Proposed by David/moderator of XP/install/activate)

  Edited by Susan/moderator so that the original poster knows that it has moved)

  Hi again. Well, my little girl was walking as I struggled with this and she sat and fixed a bunch of stuff so fast that I couldn't follow even with my eyes. She never even had a single computer course. What is - this with this generation? Thanks for your help! She read the report here and knew exactly what to do.

• Cannot install modem on Satellite P10

  I have an old Satellite P10

  (1) reinstalled Win XP sp3 (NOT of CD from Toshiba)
  2) obtained the most recent modem drivers from this Web site - can not install; It's Setup log

  2009-03-02 20:11:28 - Debug, Setup Version 1. 58A
  2009-03-02 20:11:28 - Debug, LogFlag = TRUE
  2009-03-02 20:11:29 - Debug, SourcePath is OldPath or not fixed drive
  2009-03-02 20:11:29 - Debug, installation MDC_TOS
  2009-03-02 20:11:29 - Debug, LogFlag = TRUE
  2009-03-02 20:11:30 - debug in InstallModemByRefresh()
  2009-03-02 20:11:30 - debug, CopyNT5Inf
  2009-03-02 20:13:32 - Debug, timer has expired!
  2009-03-02 20:13:32 - Debug, Setup failed

  (3) try Toshiba cd - same result modem drivers

  And Yes, I know - it's the same problem as described here several times: yellow question mark in device (PCI modem) Manager and the order of incorrect installation.
  But I installed much gentle and do not want to reinstall again

  How to install this driver AFTER other pilots?

  Hello!

  Driver Toshiba download page you will find an installation instructions document. Use this list as the software installation order and the recommended driver.
  That s important that you get all the functions work.

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Cannot install modem SATELLITE M30 604

  I don't see my modem in Device Manager. I can't see a com port in Device Manager.

  When I choose Control Panel > phone and modem options, I don't see modem.
  I chose the Add button. My modem is not detected. Then I have the possibility to install it in a list.
  I chose Have disk.
  I chose the Browse button and
  I select the Tools & Utilities CD-ROM supplied with my laptop (or downloaded files from Toshiba).
  I select the (D:\Modem Driver\NETHERLD) ltsmwxp.inf file on the CD.
  Always SOME models appear in the window of modew new installation.

  How can I install my modem?

  Hello

  I'm sure that you can install driver modem Tools & Utilities CD. If you want to download it on this way.

  Type of portable computer product
  Satellite family
  Satllite M Series product series
  Satellite M30 model
  Windows XP operating system
  Driver Modem driver type.

  Then choose the appropriate driver for your country and try to install it again.

• The Portege 2000 operating system installation

  I have a USB and DVD - rw USB disk and a CD-rom PCMCIA. The DVD - rw, floppy boots, boots, the PCMCIA card is not recognized. BIOS see the hard drive. WXP CD starts, but does not see the hard drive. The floppy drive starts all the o/s boot disks, but does not see the hard drive (FDISK does "No fixed disk present" or "unable to access drive 1".

  I have spent DAYS of research here and Google and tried several procedures to find. I don't have the factory restore CD, but I have XP and 2000 OEM CD (as well as others if necessary).
  Thank you for reading. ~ Adam

  Hello

  I don't have much experience with laptop computers Portege but if disk HARD includes two partitions are trying to copy CDs to facilities on the second partition. Later, you can try to start the facilities of the second partition.

  Please check carefully section Portege. There must be an interesting topic on the similar theme.

• Cannot install W2K on Portege 3480CT

  On eBay, I bought a Portege 3480CT use it as a good machine to create texts out of office. But now I can not install W2K on it.

  It has an external CD drive and does not install: w2k, Linux, W98 (original)... for my favorite W2K, it says: "could not find NTLDR" (w2k) and: "media entfernen - neustart: taste druecken;

  There is no other boot device, no other disc in any location... the disc is my original one, the boot device is passed to 'boot from CD' - the system is used for W2K (there a sticker on the back, which gives me this information).

  and now I'm at the point, I have no idea how to continue.

  Is it possible to make it work again?
  Thanks in advance

  Hello

  If a "NTLDR is missing" message that this indicates that the disk is not bootable.
  Many times this is caused when the computer tries to boot from the CD-ROM or a diskette not bootable.
  In this forum, many users wanted to install the W2K on this laptop.
  First of all, you need a bootable disc.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7187&MessageID=24896

  If you want to boot from the CD of Win98, you must first create a companion disk. See the page of the Toshiba driver for companion disk files.

  Please also see this site. Maybe this helps:
  http://www.computerhope.com/issues/ch000465.htm