Symbol warning on one of my hosts, VCenter in VSphere client?

Similar Questions

• I can't connect to Vcenter using vsphere client

  I installed vCenter 6.0 and vsphere client 6.0. I can connect to the web client, but when I am connected to vCenter using vsphere client I got error.

  

  In vsphere version 5.5 I can connect to vCenter using vsphere client 5.5.

  I can't find any information on this subject on vmware.com.

  Do vsphere 6.0 support connecting to vCenter using vsphere client?

  I guess you are using Vsphere Client beta built which has only the features of client enabled host.

  Try GA build Client to connect to vCenter. However, the latest vsphere 5.1 leave are available only in the web client.

• vCenter and vsphere client

  Hello

  -with a free hypervisor such as VMware vSphere hypervisor, is an agenda we can pour so vcenter United Nations donor on wants to benefit from multitudes of advanced functionality of VMware? Alternatively the Vcenter just goes along with the paid hypervisor?

  -that settles on another machine I always find the Vsphere client (no), in order to remote server access is there is other tasks pour client, and is what we can create our flat virtual form without client to use it?

  I am a beginner in the field of virtualization, and I am very intressée by this technology, is rescue thanks

  Kind regards

  Hello and welcome to the forum of the community of VMware ESXi 5.

  Please note that the 'official' language to the English forums.

  1. You want to know if it is possible to use vSphere 5 free on the host computers and manage this host using vCenter (charges apply).
     I'm currently not sure and assume that it is not covered in the license agreement for the free vSphere 5.
  2. You also wanted to know if it is possible to drive your without client vSphere vSphere hosts.
     Well, on vSphere 5 free, does not allow vMA for "write" for guests. So use withouth of some hacks and cheats sooner or later, you will need to the vSphere Client to manage the guests on your host computer.
     If you want to avoid the vSphere on your desktop/laptop client, you could install vSphere client on one of your guests on the vSphere host.

• Version 3.0 on 5.5 vCenter using vSphere client

  New vCenter 5.5 (build 2646482) most recent of the VMware Web site.

  vSphere client 5.5 (of course)

  Brilliant new V3.0 of OMIVV

  Installation device and registered in vCenter without error.

  Seems to work in the VMware web client (I'm still exploring). I can manually add servers iDRAC.

  Since the heavy Win32 client, I don't get the Wizard but I get an empty bar in the middle of the screen with "Error #2048" down at the bottom.

  My client is Win7 x 64 with IE10 default browser.

  Where to start?

  See you soon

  Ian

  Hello Ian,

  Try the following steps:

  1. Disconnect and connect to VMware Desktop client (thick client).
  2. Go to home > hosts and Clusters > select any host Dell > click the tab "OpenManage Intégration" and wait for it to load
  3. Now, click on Home > Dell Management Center, it should work now.

  Let me know how it goes.

  Thank you

  Vikram KV

• Migrate from ESXi hosting vCenter for vdSwitch

  Hello

  I'm trying to migrate my two 5.1 ESXi (port management and virtual machine) for distributed virtual switch but one of them host the vCenter 5.1. I import one successfully, but the one with the vcenter may not be imported. Is there a quick way to do without re install the vCenter?

  Thanx.

  If the vCenter is on a storage shared between two hosts of ESXi. Stop the VM vCenter. Once turned off.

  Connect to the two hosts individually using vSphere client by using the credentials of the root.

  Remove the vCenter VM inventory and re-register to the host using dvswitch.

  On the VM vCenter back and migrate the other host to dvswitch now.

• Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.

  I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:

  vSphere Client could not connect to "vCenter_Server_IP_Address".
  A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))

  I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".

  There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi

  Any ideas what could have happened and how to fix it?

  observe the following error in the logs.

  2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a

  Follow this article to fix the problem.

  http://alexjs.EU/VMware-ESX-and-a-full-SQL-Server-database/

• VSphere Client multiple connections to a single server vCenter Server?

  I have a vCenter Server that manages a few hosts. I know it's a bad habit to manage guests individually using vSphere Client, but I was wondering if I can have multiple connections to the same server vCenter Server vSphere client using the same Windows credentials?

  It seems counterproductive to only allow a connection to the server vCenter Server...

  Yes - by default, a connection up to 25 to vCenter

• Cannot start device to host vCenter

  Nice day. I have a strange here and can't find any info on the web, hoping someone can help. I have 2 5.5 ESXi hosts, one of them is running device vCenter. I can't start the machine vCenter using the following command from the command-line... vmsvc/power.on vim - cmd 14 (14 being the ID of the device of vCenter). All other VMs on the host started very well by using this command. When I tried on vCenter, I get no response, no error, nothing. The order is always suspended more than an hour now. I already tried to simply recharge the host but got the same problem, trying to start vCenter device. The CLI is now completely useless... Can I push on and get a return transport but nothing else, cannot ESC, out of order or the CLI or whatever it is. Anyone seen this before? Any suggestions?

  This article solved my problem. I consulted the host directly through vSphere, has been able to view the data store and the files of the virtual machine. Renamed .vswp and .lck files and she pulled up in 2 seconds approximately. Much thanks to the author of this article

  http://www.virtxpert.com/failed-start-virtual-machine-error-18/

• Creation function Interior package Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back

  Hello

  I am trying to create a function inside the packaging.

  In the Package BODY I've defined the function, but in the definition of the package, it gives me syntax errors.

  • Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back
  • Error (39.1): PLS-00103: encountered the symbol "END" when waiting for one of the following values: start the function pragma procedure subtype type current cursor removal exist prior

  What can I do wrong here.

  Thank you

  Ken

  Inner package BODY:

  / * FUNCTION to form the query * /.

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2

  )

  RETURN VARCHAR2

  AS

  varSQLQuery VARCHAR2 (10000);

  BEGIN

  varSQLQuery: = "test query";

  RETURN varSQLQuery;

  DBMS_OUTPUT. Put_line (varSQLQuery);

  END UDF_FORMQUERY;

  Definition of package inside:

  create or replace PACKAGE BODY MY_SQUERY

  AS

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  VARCHAR2 IN_SRC_CONDN( )

  RETURN VARCHAR2

  AS varSQLQuery VARCHAR2 (10000);

  END MY_SQUERY;

  your package definition is incorrect, you have included the part of the declaration of the variables of the function in the package definition. It should be like

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2)

  RETURN VARCHAR2;

• VCSA 6 - could not connect to one or more systems vCenter Server - but I already deleted it...

  I have a recording of question in my server vcenter (VCSA) after adding a few VCSAs to a single SSO. All VCSAs are displayed correctly, but I removed an old... will be... No... die. It causes the initial connection to last 2 to 5 minutes. It shows immediately and the error on the top of the page indicating the "vcenter server in not available.

  

  As you can see, the VCSA referenced in the error message is not even in the list of 'the vCenter inventory'-> 'resources"->"Server vCenter:

  

  But it's somehow in the section 'License' from the same server vcenter:

  

  I think that screwing with the other parts of my installation vcenter because that stuff will be reached a limit of 120 and stop working. Here is a SS just try to look at the Configuration of the system:

  

  It expires essentially like some other windows. Originally vcenter be largely unusable.

  I think that the main problem is that I can't remove a stale VCSA Mode related SSO. It causes hanging on login and many never completed processes. I could increase the time-out period, but this will not solve the bland entry which is the culprit.

  Here is the error that occurred within the VCSA. It is every time I have to refer to something to check with other vcenter servers. Given one is more accessible, it is not able to speak, causing a timeout. The data service has expired because a main task took more than 120 seconds. See the vsphere client - virgo.log for more details.

  Okay it looks like you can run the command cmsso-util. Time consuming but gets the job done.

  VMware KB: Dismantling of the vCenter Server or a Services Platform controller

  hqvcenter1: / # cmsso - unsubscribe util - node-pnid balvcenter3 [email protected] name

  2015 04-20 T 15: 21:17.810Z order: [' / usr/lib/vmware-vmafd/bin/dir-cli ', 'service', 'list', '-login', '[email protected]']

  2015 04-20 T 15: 21:17.952Z done by running the command

  2015 04-20 T 15: 21:18.145Z order: [' / usr/lib/vmware-vmdir/bin/vdcleavefed ', '-h', 'balvcenter3', '-u', 'administrator']

  2015 04-20 T 15: 27:37.058Z done by running the command

  Success

• How to pass the host vcenter is installed on?

  We just bought a new server that came with ESXi 5.0. We want to upgrade to 5.1 before adding virtual machines. We have only a handful of VMware servers, so this is the first time that we used vcenter. We licensed Essentials and installed vcenter VM and installed Manager upgrade on a server that is separate from Windows.

  When I try to upgrade from the host, it fails. I guess it's because I'm trying to get the same host I'm trying to get to level?

  I think that you do not use shared storage as you could just vmotion vcenter

  and with your lic does storage vmotion

  you have to pass the vcenter to another host.

  You can move VMs from the vcenter through a move/copy to another host via a data store browser

  or

  connection to the host, vcenter for export to the FVO, turn off vcenter. Connect to host2, import ovf containing vcenter.

  still a pain...

  or you could do manual updates on the host.

  Anyway its not too easy to do...

• I/o control of storage - "connected to one or more hosts pre-4.1 version...".  No, I'm not.

  Subject says it all.  When I click on the control of i/o Storage box, I get the message '< name of the data store > data store is connected to one or more hosts pre-version 4.1 that do not control of storage i/o support.  This is false.  There are only two servers connected, and they are the two 5.0 with the latest patch.  What gives?

  Apparently, it's a matter of having the correct license on you host.

  One company more SIOC support so if any host without it is connected to the data store, you will get the error.

  After thinking that out, it was to allow only on data warehouses that are connected to the Ent host exclusevly + and it worked without any errors.

  The one with my installation/ISO-files must have this option disabled because it is shared with the hosts having licences below.

  Of course, I pulled my hair on the error and started watching the bad VMs now outdated information for VirtualCenter until I found this blog:

  http://yuridejager.WordPress.com/2011/01/10/VMware-vSphere-4-x-error-the-datastore-is-connected-to-one-or-more-hosts-that-do-not-support-storage-IO-control/

  Hope this helps explaining your problem.

  (Yes, I agree that sucks it error if poster has nothing to do with the reason behind the problem in our case)

• PLS-00103: encountered the symbol "" when expecting one of the following values:

  Hello
  
  When running under pl/sql block get below error...
  
  Please advice me where I am wrong
  
  DECLARE
  T_DATE date: = sysdate-813;
  v_last_closing_book_bal_amt (19: 4) NUMBER: = NULL;
  v_txn_amt (19: 4) NUMBER: = NULL;
  v_max NUMBER (5): = 100;
  NUMBER (5) v_count: = 1;
  
  BEGIN
  
  FOR I IN 1.30
  LOOP
  
  WHILE (v_count < = v_max)
  LOOP
  Insert into AI_ODS_TXN (BANK_BRANCH_ID,ACCT_NO,ISO_CCY_CD,CR_DR_IND,BOOK_DT,VALUE_DT,TXN_KEY,TXN_TYP_DE,TXN_CAT_DE,TXN_CD,TXN_AMT,FUNDS_TYP_CD,RPT_REF_TXT,INSERTED_TS,UPDATED_TS,BANK_ABA_NO,BENE_PARTY_BANK_ID,BENE_PARTY_BANK_NM,BENE_PARTY_BANK_ADDR_LINE1_TXT,BENE_PARTY_BANK_ADDR_LINE2_TXT ,BENE_PARTY_BANK_ADDR_LINE3_TXT,BENE_BANK_ID,BENE_BANK_NM,BENE_BANK_ADDR_LINE1_TXT,BENE_BANK_ADDR_LINE2_TXT,BENE_BANK_ADDR_LINE3_TXT,DETAIL_LINE1_TXT,DETAIL_LINE2_TXT,DETAIL_LINE3_TXT,DETAIL_LINE4_TXT,DETAIL_LINE5_TXT,FED_CLEAR_TS_TXT,CR_DR_PARTY_NM,CR_DR_PARTY_ADDR_LINE1_TXT,CONTROL_NO,INTERMED_BANK_ID ,INTERMED_BANK_NM,INTERMED_BANK_ADDR_LINE1_TXT,INTERMED_BANK_ADDR_LINE2_TXT,INTERMED_BANK_ADDR_LINE3_TXT,ORG_BANK_NM,ORG_BANK_ADDR_LINE1_TXT,ORG_BANK_ADDR_LINE2_TXT,ORG_BANK_ADDR_LINE3_TXT,OGB_BANK_NM,OGB_BANK_ADDR_LINE1_TXT,OGB_BANK_ADDR_LINE2_TXT,OGB_BANK_ADDR_LINE3_TXT,INSTRUCT_BANK_NM,INSTRUCT_BANK_ADDR_LINE1_TXT ,UNCLEAR_DT,UNCLEAR_ITEM_IND,INSTRUCT_AMT,INSTRUCT_CCY_CD,SENDER_CHARGE_LINE1_TXT,SENDER_CHARGE_LINE2_TXT,SENDER_CHARGE_LINE3_TXT,SENDER_CHARGE_LINE4_TXT,REGULATORY_TXT,BANK_REF_TXT,EXT_REF_TXT,YOUR_REF_TXT,FED_DR_ACCT_NO,SWIFT_STMT_NO,NDC_CD,BAI_CD,SWIFT_CD,CNS_SEQ_NO,LOAD_NO,UPDATED_WORKFLOW_NM,EXCHANGE_RT,ORG_BANK_ID ,OGB_BANK_ID,INSTRUCT_BANK_ID,SRC_MSG_TYP,CLEAR_DT,JOURNAL_NO,SERIAL_NO,SWIFT_STMT_DT,CR_DR_TXT,SUPP_DETAIL_TXT,GVC_CD,BOOKING_TXT,ITEM_TYP_DE,ORG_BANK_ACCT_NO,RETURNED_DDT_TXT,DETAIL_LINE6_TXT,DETAIL_LINE7_TXT,DETAIL_LINE8_TXT,DETAIL_LINE9_TXT,DETAIL_LINE10_TXT,DETAIL_LINE11_TXT,DETAIL_LINE12_TXT,DETAIL_LINE13_TXT ,DETAIL_LINE14_TXT,EXTRA_BCS_DETAIL_IND,OGB_BANK_ACCT_NO,INTERMED_BANK_ACCT_NO,CR_FLOOR_LIMIT_AMT,DR_FLOOR_LIMIT_AMT,MT942_TOTAL_CR_AMT,MT942_TOTAL_CR_NO,MT942_TOTAL_DR_AMT,MT942_TOTAL_DR_NO,INTERIM_FINAL_TXN_IND) values ('DBBRUSSELS','825-0004665-47','EUR','C',to_timestamp(v_date,'DD-MON-RR HH.MI. SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), '2009102201521911232172' + v_count, "TRANSFER", "TRANSFER of FUNDS", "SWF", 100, "VT", "I000424906808216", to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), null, null, null, null, "AAAAA35AAHNLEITEN GMBH", null, null, null, null, null, null,'IHR KT 0000002056/200000044 ', 4 NR.5100000835 09.03.09/N','ETTOBTR. NR.510000', ' 0872 6.627,01 10.03.09/NETTOBTR. 4', 559, 21 NR.5100000891 11.03', null, null, null, null, null, null, null, null, null, "DUROPACK AG 1235 WIEN", "XXN33XXXXROHNLEITEN GMBH", null, null, null, null, null, null, null, null, null, ' n, null, null, null, null, null, null, null, ' PET326000108PAGE AND ', 'I000424906808216', 'I000424906808216', null,' 102/1 ', null, 195, 'TRF', null, 0, "w_MT940_PROC - Type: first STMT ', 0, '15150', null, null, '940', null , null, null, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) (SSXFF AM'), 'C', null, '051', ' GUTSCHRIFT ELEKTRON. ", '76VB', '501057590',"QQQ34DQQQROHNLEITEN GMBH ", 09/NETTOBTR. 5.093,33 NO.5 ',' 100000899/12.03.09/NETTOBT','R. 2.302,58 NR.5100000917 / 13.03.09/NETTOBTR «,» (831,37 no, 'R.5100001006 2', null, null, null, null, null, null,' n, null, null, null, null, null, null, 'F');
  COMMIT;
  
  v_count: = v_count + 1;
  
  END LOOP;
  
  
  
  
  
  Select nvl(last_closing_book_bal_amt,0) in the v_last_closing_book_bal_amt of ai_ods_acct_tbl
  WHERE ACCT_NO = 825-0004665-47' AND BANK_BRANCH_ID = 'DBBRUSSELS' AND ISO_CCY_CD = "EUR";
  
  Select nvl (sum (txn_amt), 0) in the v_txn_amt of ai_ods_txn
  WHERE ACCT_NO = 825-0004665-47' AND BANK_BRANCH_ID = 'DBBRUSSELS' AND ISO_CCY_CD = 'EUR' and book_dt = to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM');
  
  
  
  Insert into ai_ods_BOOK_dt_agg (BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, BOOK_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ('DBBRUSSELS', 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  Insert into ai_ods_value_dt_agg (BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, VALUE_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ('DBBRUSSELS', 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  Insert into ai_ods_CATEGORY_agg (TXN_CAT_DE, BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, BOOK_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ("TRANSFER of FUNDS", "DBBRUSSELS", 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  
  Insert into ai_ods_acct_bal (BANK_BRANCH_ID,ACCT_NO,ISO_CCY_CD,BOOK_DT,INTERIM_FINAL_BAL_IND,LOAD_NO,BOOK_BAL_AMT,VALUE_BAL_AMT,COLLECTED_BAL_AMT,TOTAL_DR_AMT,TOTAL_CR_AMT,TOTAL_CHECK_CR_AMT,TOTAL_LBX_AMT,TOTAL_IMPREST_DR_AMT,TOTAL_IMPREST_CR_AMT,ONE_DAY_FLOAT_AMT,TWO_DAY_FLOAT_AMT,THREE_DAY_FLOAT_AMT ,FOUR_DAY_FLOAT_AMT,MTD_AVG_COLLECTED_BAL_AMT,YTD_AVG_COLLECTED_BAL_AMT,INSERTED_TS,UPDATED_TS,UPDATED_WORKFLOW_NM,OPEN_BOOK_BAL_AMT,SWIFT_STMT_DT,SWIFT_STMT_NO,MISSING_STMT_IND,SRC_MSG_TYP,TAG_60F_DT,TAG_60F_AMT,STMT_TYPE_IND) values ('DBBRUSSELS','825-0004665-47','EUR',to_timestamp(v_date,'DD-MON-RR HH.MI. SSXFF AM'), 'F', 0, v_last_closing_book_bal_amt + v_txn_amt,.
  v_last_closing_book_bal_amt + v_txn_amt, 0, 0, v_txn_amt, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), ' w_MT940_PROC - Type: first STMT ", v_last_closing_book_bal_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) (SSXFF AM'),' 102/1 ', ', '940', to_timestamp (17 April 09 ',' DD-MON-RR HH.MI.) SSXFF AM'), v_last_closing_book_bal_amt, '=');
  COMMIT;
  
  T_DATE: = sysdate-809;
  T_DATE: = T_DATE + I;
  v_count: = 1;
  
  END LOOP;
  END;
  /
  
  
  ERROR
  *=====*
  
  T_DATE date: = sysdate-813;
  ***
  ERROR on line 2:
  ORA-06550: line 2, column 7:
  PLS-00103: encountered the symbol "" when expecting one of the following values:
  constant exception < an ID >
  * < a double-quoted delimited identifiers > table double Fedya Ref *.
  char time timestamp interval date binary national character
  NCHAR

  Hello

  First of all, you said T_DATE as DATE data type

  v_date                                      date := sysdate -813;
  

  And then you try to use a timestamp like this

  to_timestamp(v_date,'DD-MON-RR HH.MI.SSXFF AM'),
  

  T_DATE's DATE, not VARCHAR2.

  You should try CAST to convert the TIMESTAMP DATE. Or. first convert the VARCHAR2 DATE, then by TIMESTAMP.

  Kind regards

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• vSphere Client 5 U1 unable to connect to the host of U1 ESXi 4.1

  Hello

  I'm having a small problem.

  I am currently using vSphere Client 5 U1 (5.0.0 Build 623373) to connect directly to ESXi hosts (still no vCenter).

  I can connect successfully to 5.0 U1 hosts, but I have a few hosts U1 4.1 inherited in the lab which I just can't connect with.

  A little research in the compatibility tables show that with the most recent client, I should be able to connect do former ESXi hosts.

  However, when I try to connect to this host U1 4.1, I get a popup to update with the message "customer support required files must be extracted from the 'vsphereclient.vmware.com' server and installed". And then I get a prompt to install/save a Setup program.

  What is this new installer? Another version of the Client? Have I not the newest one? Anyway, I can't complete the download for this new installer (connection failure).

  The host of ESXi 4.1 is on the network and I can connect with an older Client (4.1) that is installed in a different workstation.

  What happens here?

  Thanks in advance!

  You must install as vSphere client major versions (3, 4, 5) but VMware tries to make this process as transparent as possible. That's why it asks to install it automatically.

  Once installed, just launch v5 and it automatically and transparently pass the correct version if you connect to a 4.x server.