Synchronization after reconnection event.

Similar Questions

• Time after the event, without blocking the user

  Hi, I am creating a software to control a power supply. One feature that I have bad to add is a timer.

  I have a structure for the event that fires when the user clicks on the buttons, which most slowly increases the current for a period defined by the user. I want the timer to count so far defined by the user of time (in seconds) after the event fires. One thing, however, is that I need to be free to trigger another event (which stops the power supply in an emergency) so I can't have this synchronization process lock me up for snap buttons.

  I was experimenting with the millisecond timer, as well as with a loop that goes through with a defined time interval, but it is not quite give me the functionality I want. (I've been placing these loops of timing outside the structure of the event to other events run yet, but I want the timer to only is triggered after an event is triggered, is it still possible?)

  If you need more information, just ask, thanks!

  Thnigs to do to dramatically improve your code:

  You need not separate loop.  Put your code from timer inside the structure of the case of timeout event.  Set the time-out to 50 instead of 500 to match what is in your separate loop.  You can get rid of the becaue of queue, it is no longer necessary.  Create registry to offset on the main loop.  When the event occurs to start timer, pass the time for the shift on the right side register.  Wire the shift register on the left side in the event of timeout to use its value.  BTW, the shift in your separate loop register is used to nothing because you do not change the value on the wire.  Don't put all the loop in the case of timeout, get rid of the loop and just put the code of the loop, with the exception of the EndTime variable that can be removed and 50mS delay, which can be removed.

  Put the Boolean value of early Inc. inside the case to start Inc. value change event.  Same for all Boolean values.  Put them in their cases of particular event.

  Get rid of local variables now.  You'll race conditions if you do not, you doing wrong in that you don't need especially now.  Look at the current limit control.  Add a wire from the control of the current limit to where feeds the local variable of the current limit.  Delete the local section.

  Move all the controls from the inside of the structure of the event outside the structure of the event, but still within the main loop.  Wire controls where they are going.  Now you can eliminate all local variables of thos and just wire from control where they are needed.

  All outputs error.  One is enough.  Create an error in your front panel.  On the block-diagram wire the error in the first function of Sorrensen before the loop.  Where the error from the Sorrensen hit the loop function, change the terminal on a shift register (right click and select replace with shift register).  Move the error Out 2 to out of the loop on the right side.  Error 2 wire the register shift on the right side.  Everywhere, you need a mistake in, branch off the error in the thread because it is in the loop.  Wire all your outs of the error in the case of the event and the last Sorrensen function to a function of merge error.  Wire of this error on the shift register.  All your errors are combined in a single indicator.

  That should do for now.

• Two master machine after reconnection

  We use the Berkeley DB 5.1.19 with standard replication manager.
  We test the given sample "excxx_repquote" in a configuration with two computers (a master and a slave)
  with the following configuration
  
  -ACK quoroum
  -nsite = 1
  -priority = 100
  -bulk = 1
  -verbose on
  
  We try to disconnect the cable between the two machines and check the state(MASTER/CLIENT) of the machine according to the events of BDB.
  
  We notice that disconnect after both machines became a MASTER as expected but after reconnecting the cable again
  Sometimes, they remain as MASTER without running in the electoral process, and sometimes it works as expected (one became CUSTOMER)
  
  If we update the table on the machine, it is automatically concluded election and finish well (a MASTER and a CUSTOMER)
  
  As our database solution is not updated frequently, we want to know if there is another way to make sure to get to the correct state
  without developing a ReplicationMager based on the BDB BaseAPI.
  
  
  
  Here is an example of a session when the two master machine of stay:
  
  LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib//root/RepQuoteExample h/opt/bdb /-l 2.0.0.110:12345 - r 2.0.0.210:12345 - a quorum b n 1
  
  [Node 1 - 2.0.0.210:12345]
  
  [1303813200:224828] [6870/1114081600] excxx_repquote: init 2.0.0.110:12345 with result 115 site connection
  [1303813201:226494] [6870/1114081600] excxx_repquote: 2.0.0.110:12345 EID connection handshake 0
  [1303813246:138904] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  [1303813306:199920] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  [1303813366:259927] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  [1303813426:319924] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  [1303813486:381340] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  [1303813546:441939] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  [1303813606:504223] [6870/1103591744] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11350] back
  
  
  [Node 2 - 2.0.0.110:12345]
  [1303817756:737444] excxx_repquote [28294/1134483776]: accepts a new connection
  [1303817756:737753] excxx_repquote [28294/1134483776]: 2.0.0.210:12345 EID connection 0 replaces existing
  [1303817785:985872] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303817846:51545] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303817906:118202] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303817966:181879] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303818026:247542] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303818086:311201] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303818146:374885] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303818206:439538] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  [1303818266:501207] [28294/1123993920] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [10654] back
  
  
  
  
  Here is an example of session work as expected:
  
  
  LD_LIBRARY_PATH=/usr/local/BerkeleyDB.5.1/lib//root/RepQuoteExample h/opt/bdb /-l 2.0.0.110:12345 - r 2.0.0.210:12345 - a quorum b n 1
  
  [Node 1 - 2.0.0.210:12345]
  
  
  [1303813837:576838] [9750/1085184320] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, Star type
  t_sync, LSN [1] [13418] nobuf
  [1303813837:576970] [9750/1102199104] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11442] back
  [1303813837:602837] [9750/1112688960] excxx_repquote: init 2.0.0.110:12345 with result 115 site connection
  [1303813837:603267] [9750/1112688960] excxx_repquote: 2.0.0.110:12345 EID connection handshake 0
  [1303813837:719943] [9750/1085184320] excxx_repquote: bulk_msg: Send copy due to PERM after buffer
  [1303813837:719961] [9750/1085184320] excxx_repquote: send_bulk: send 252 (0xfc) bytes of buffer in bulk
  [1303813837:719969] [9750/1085184320] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type in bulk
  _log, LSN [1] [13510] hunting perm
  [1303813837:719992] [9750/1085184320] excxx_repquote: wait for the acknowledgement of receipt: need 1
  [1303813837:720330] [9750/1154648384] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 26 eid 0, type
  pmaster, LSN [0] [0]
  [1303813837:759986] [9750/1144158528] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 26 eid 0, type only
  WCLIENT, LSN [0] [0]
  [1303813837:760054] [9750/1144158528] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type news
  ITE, LSN [0] [0] nobuf
  [1303813837:760090] [9750/1144158528] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type newm
  Aster, LSN [1] [13566] nobuf
  [1303813837:760123] [9750/1144158528] excxx_repquote: NEWSITE info added site 2.0.0.110:12345
  [1303813837:760142] [9750/1144158528] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 28 eid 0, type only
  wmaster, LSN [1] [12926]
  [1303813837:760155] [9750/1144158528] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type dupm
  Aster, LSN [0] [0] nobuf
  [1303813837:760425] [9750/1133668672] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 26 eid 0, type vo
  TE1, LSN [1] [12926]
  [1303813837:760525] [9750/1133668672] excxx_repquote: master's voice has received
  [1303813837:760540] [9750/1133668672] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type newm
  Aster, LSN [1] [13566] nobuf
  [1303813837:760567] [9750/1133668672] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 28 eid 0, bu type
  lk_log, LSN [1] [13302] perm
  [1303813837:760575] excxx_repquote [9750/1133668672]: file received the master
  [1303813837:760585] [9750/1133668672] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 28 eid 0, bu type
  lk_log, LSN [1] [13302] perm
  [1303813837:760592] [9750/1133668672] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type dupm
  Aster, LSN [0] [0] nobuf
  Kills Apr 26 06:30:37 2011 - DB_EVENT_REP_PERM_FAILED.
  Kills Apr 26 06:30:37 2011 - thanks insufficient to ensure the sustainability of the transaction.
  [1303813837:771840] [9750/1085184320] excxx_repquote: rep_send_function returned: 110
  [1303813838:822994] [9750/1154648384] excxx_repquote: rep_start: old version 17 journal found
  [1303813838:823207] [9750/1154648384] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type recruiters
  bind, LSN [0] [0] nobuf
  Kills Apr 26 06:30:38, 2011 - DB_EVENT_REP_CLIENT.
  
  
  
  [Node 2 - 2.0.0.110:12345]
  
  [1303818383:768511] [1697/1116809536] excxx_repquote: Repmgr_stable_lsn: stable_lsn [1] [11442] back
  [1303818383:775392] [1697/1106319680] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 26 eid - 1, type sta
  rt_sync, LSN [1] [12778] nobuf
  [1303818383:775924] [1697/1106319680] excxx_repquote: bulk_msg: Send copy due to PERM after buffer
  [1303818383:775945] [1697/1106319680] excxx_repquote: send_bulk: send 252 (0xfc) bytes of buffer in bulk
  [1303818383:775953] [1697/1106319680] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 26 eid - 1, type bul
  k_log, LSN [1] [12870] hunting perm
  [1303818383:775975] [1697/1106319680] excxx_repquote: wait for the acknowledgement of receipt: need 1
  Kills Apr 26 14:46:23 2011 - DB_EVENT_REP_PERM_FAILED.
  Kills Apr 26 14:46:23 2011 - thanks insufficient to ensure the sustainability of the transaction.
  [1303818383:828424] [1697/1106319680] excxx_repquote: rep_send_function returned: 110
  excxx_repquote: site 2.0.0.210:12345 can not read: connection reset by peer
  [1303818385:199669] [1697/1127299392] excxx_repquote: Repmgr: bust of connection. Archives of block
  [1303818393:152555] excxx_repquote [1697/1127299392]: accepts a new connection
  [1303818393:152902] [1697/1127299392] excxx_repquote: site 2.0.0.210:12345 EID idle handshake 0
  [1303818393:269644] [1697/1158768960] excxx_repquote: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 28 eid 0, type b
  ulk_log, LSN [1] [13510] hunting perm
  [1303818393:269671] [1697/1158768960] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 26 eid - 1, type dup
  Master, LSN [0] [0] nobuf
  [1303818393:269882] [1697/1158768960] excxx_repquote: rep_start: old version 17 journal found
  [1303818393:270050] [1697/1158768960] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv = 26 17 gen eid - 1, new type
  customer, LSN [0] [0] nobuf
  Kills Apr 26 14:46:33 2011 - DB_EVENT_REP_CLIENT.
  excxx_repquote: ignore the event 4
  [1303818393:270161] excxx_repquote [1697/1179748672]: from the election thread
  [1303818393:270209] [1697/1179748672] excxx_repquote: Start election Europe 1, ack 1, priority 100
  [1303818393:270223] excxx_repquote [1697/1179748672]: election thread has egen 27
  [1303818393:272244] [1697/1179748672] excxx_repquote: count VOTE1 [0] (2147483647, 27)
  [1303818393:272270] excxx_repquote [1697/1179748672]: starts an election
  [1303818393:272284] [1697/1179748672] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 26 eid - 1, type vot
  E1, LSN [1] [12926] nobuf
  [1303818393:272310] [1697/1179748672] excxx_repquote: count VOTE2 [0] (2147483647, 27)
  [1303818393:272320] [1697/1179748672] excxx_repquote: counted my vote 1
  [1303818393:272328] [1697/1179748672] excxx_repquote: jump phase2 waiting: already had 1 vote
  [1303818393:272337] excxx_repquote [1697/1179748672]: got enough votes to win. election of fact; Gen (prev) 26
  [1303818393:272348] excxx_repquote [1697/1179748672]: election completed in 0.002117000 sec
  [1303818393:272358] excxx_repquote [1697/1179748672]: election; Egen 28
  excxx_repquote: ignore the event 5
  [1303818393:272386] excxx_repquote [1697/1179748672]: election ending in 0, e_th 0, egen 28, flag 0x2a2c, e_fl, 0x0, lo_fl 0
  X 4
  [1303818393:272411] excxx_repquote [1697/1179748672]: election; Egen 28
  [1303818393:272422] excxx_repquote [1697/1179748672]: new master gen 28, egen 29
  [1303818393:272829] [1697/1179748672] excxx_repquote: rep_start: old version of newspaper was 17
  [1303818393:272836] [1697/1179748672] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv = 28 17 gen eid - 1, new type
  Master, LSN [1] [12926] nobuf
  [1303818393:272854] [1697/1179748672] excxx_repquote: restore_prep: No. prepares. Skip.
  [1303818393:273175] [1697/1179748672] excxx_repquote: bulk_msg: Send copy due to PERM after buffer
  [1303818393:273184] [1697/1179748672] excxx_repquote: send_bulk: bytes of buffer for the bulk send 480 (0x1e0)
  [1303818393:273190] [1697/1179748672] excxx_repquote: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 28 eid - 1, type bul
  k_log, LSN [1] [13302] perm
  Kills Apr 26 14:46:33 2011 - DB_EVENT_REP_MASTER.
  ---------------------------------------------------------------------------------------------------------------------------------------
  
  
  
  Thanks in advance
  So any idea can be offered

  To follow up, I wanted to let you know that we could add something to repmgr to detect masters duplicates in our next release. Thank you for reporting this!

  Paula Bingham
  Oracle

• Program hangs after 25 events

  I'm running on an issue where my program crashes after 25 events were recorded from a cluster. I created a cluster 32 Boolean controls, and when a control is pressed it triggers an event in my structure of the event. It doesn't matter which of the 32 controls I click, after exactly 25 button presses, that the program crashes. Does anyone have ideas, which could be the cause?

  It would really help if you could do a simplified demonstration.

  In the zone configuration of the event, is there something interesting (front of the lock, limit maximum instances, etc.)

  You set a maximum queue size?

• Box state to read option after another event of the listener

  I know that it is something very simple, but I'm still a little fuzzy on the scope of the fields & methods.  I want to read the State of a radio button after another event to the listener.  I did a work around, but I don't know that there is a much better way.

  Code:

  / public final class SelectionScreen extends screen
  {
  public boolean selected;
   
  public SelectionScreen()
  {
  Initialize and configure the title bar
  Super (MainScreen.VERTICAL_SCROLL |) MainScreen.VERTICAL_SCROLLBAR);
  setTitle ("choice screen");
              
  create and add radio buttons for the selection of the screen
  RadioButtonGroup screenGroup = new RadioButtonGroup();
  RadioButtonField screen1Field is new RadioButtonField (Goto screen '1', screenGroup, true, RadioButtonField.FIELD_RIGHT);.
  RadioButtonField screen2Field = new RadioButtonField ("Gogo screen 2", screenGroup, false, RadioButtonField.FIELD_RIGHT);
  Add (screen1Field);
  Add (screen2Field);
      
  I would like to remove this code...
  selected = screen1Field.isSelected ();
      
  screen1Field.setChangeListener (new FieldChangeListener() {}
  {} public fieldChanged no (field arg0, int arg1)
  selected =! selected;
  }
  } );
  down here and use the isSelected inside the button1Press() method
             
  ButtonField buttonField_1 = new ButtonField ('Next', ButtonField.CONSUME_CLICK |) ButtonField.FIELD_HCENTER);
  Add (buttonField_1);
                    
  buttonField_1.setChangeListener (new FieldChangeListener() {}
  {} public fieldChanged no (field arg0, int arg1)
  button1Press();
  }
  } );
  }
    
  private void button1Press() {}
  I would use the next line here
  If {(screen1Field.isSelected ())}
  If {(selected)
  Dialog.Alert ("goes to screen 1");
  } else {}
  Dialog.Alert ("goes to screen 2");
  }
  }
  }

  Just make your RadioButtonFields of the private members of your class so that you can access them from anywhere within the class. That is to say:

  private RadioButtonField screen1Field;

  public SelectionScreen()
  {
  Initialize and configure the title bar
  Super (MainScreen.VERTICAL_SCROLL |) MainScreen.VERTICAL_SCROLLBAR);
  setTitle ("choice screen");
              
  create and add radio buttons for the selection of the screen
  RadioButtonGroup screenGroup = new RadioButtonGroup();
    screen1Field is new RadioButtonField (Goto screen '1', screenGroup, true, RadioButtonField.FIELD_RIGHT);.

  .........

• Enabling LDAP synchronization after configuration of the IOM in R2

  Friends,
  
  Did anyone tried enabling the LDAP synchronization after configuration of the IOM in R2?
  
  I'm doing the steps the below url.
  
  http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
  
  But I'm not finding below.
  
  / db/LDAPUser
  / db/LDAPRole
  / db/LDAPRoleHierarchy
  / db/LDAPRoleMembership
  / DB/RA_LDAPROLE. XML
  / DB/RA_LDAPROLEHIERARCHY. XML
  / DB/RA_LDAPROLEMEMBERSHIP. XML
  / DB/RA_LDAPUSER. XML
  / DB/RA_MLS_LDAPROLE. XML
  / DB/RA_MLS_LDAPUSER. XML
  
  Few of them exist in/metadata/iam-features-ldap-sync, but not all. I'm not find LDAPContrainerRules.xml anywhere at all.
  
  I do something wrong or this documentation is wrong.
  
  Please suggest.

  Another post, try the following
  I do not have the tiried yet, it seems ok. After your results/experiences, must also try.

  Find the detailed steps in the link below
  http://docs.Oracle.com/CD/E27559_01/install.1112/e27301/OIM.htm#CDDGJIBJ
  http://docs.Oracle.com/CD/E14571_01/install.1111/e12002/oidonly014.htm

• Firefox Sync synchronize after reinstalling windows.

  Afret reinstall I loged in Firefox sync and started to wait for the synchronization. Nothing happened. I tried once or twice, restart firefox, and sync still doesn't work. I decided to reinstall firefox with removing profile folder. After that, I loged in F sync and it downloaded history and etc., I created a few minutes ago. I don't understand why it won't download my latest profile news.

  The previous answer is outdated information. The 'sync key' (aka recovery key) last used in Firefox 28 with the earlier version of Sync. 29 Firefox and later versions (with Sync 1.5) can an implementation of the 'key' that the user never sees, which is created from the selected password. As mentioned above, if you change the password data in the synchronization server are wiped to allow you to continue using this account with a new password and to prevent your access data by an unauthorized person.

  In addition, you use Sync in a way that was not intended. Sync to synchronize the data of Firefox across multiple devices, not as a backup media for a device, as it looks like you were trying to use.

• Unable to recover the old data synchronization after reinstalling operating system

  Hello

  I was using Firefox 26. Recently, I've upgraded to the latest version. A few reasons, I had to reinstall my windows 7 OS.

  After I installed Windows 7, I installed the latest Firefox and tried to synchronize data. I was unable to connect because I forgot the password. I tried using the link "password forgotten", but he said there is no such thing as e-mail id. It was surprising to me. I'm still all emails, including the secret key, I used to add new devices earlier, since Firefox in my mail box.

  Since I left without another option, if I'm creating a new represent now on Firefox with old email ID. The account is created successfully. Again, it is strange to me. However, my old data are not synchronized.

  I need the old data. Help, please.

  -
  Thank you
  Ravi

  Sorry, Sync was not intended to be used to backup Firefox data before reinstalling the operating system. Its purpose is to synchronize several separate installations of Firefox, usually on the various devices.

  The old version of Firefox 26 uses another version of Sync, the latest version of synchronization happen in Firefox 29. The largest variation in sync had to do with the recovery key ('secret key') - is no longer something to see the user or has to deal.

  You should have installed Firefox 28 or earlier and then connected to your account synchronization to recover your data and then put updated for Firefox 32. By creating a new account with the same email address, your data has been wiped out by synchronization servers to allow you to start a new.

• iPod and iPhone do not synchronize after upgraded iTunes 12.4.1.6 WiFi

  I use OSX 10.11.5 on my iMac. My iPiPod and my iPhone fail to synchronize wireless after iTunes 12.4.1.6 set to level. I tried a manual synchronization, who has worked in the past to return wifi sync but it made no difference this time. Can anyone help?

  Sync your iPhone, iPad or iPod touch with iTunes using Wi - Fi - Apple Support

• How to restore synchronization after reset?

  My sync is no longer active after a reset troubleshooting on my windows pc. When I try to reactivate it on the Tools drop-down menu I see two options: 1) "sync configuration" which gives me options to "create a new account" or "I have an account") or 2) tools - > options-> options-> sync that gives me the choice "set up firefox sync" or "associate a device." on my existing or already paired device (mac) on the Tools menu shows only a selection of 'sync '. None of the choices seem so, how do I get an existing account to sync works on my windows pc? the instructions, if any, to do exactly this are vague. I have my key account e-mail, password synchronization and recovery. Sorry if I'm missing something here. Thank you.

  Thank you very much! This seems to work... Setup is completed and first synchronization, etc., is the treatment now. If only the option 'I don't have the camera with me' was explanations mentioned to select in the circumstances I have described. I was just not go there as it does not seem appropriate. Thanks again.

• Equium A60-181 screen is very low after reconnection of cable

  My satellite had been very slow lately and I was advised to remove the base and clean the dust fan (I'm quite a novice).

  When I replaced the screw, the screen would not work, but all the power lights were on. I reopened the base and found that a wire was disconnected and rested there. After that, the screen went very dark.

  Any ideas what it could be?

  Any help appreciated.

  Hello

  Uh, I think that it s is probably not a good idea to screw on your machine without having experience with mobile systems.

  Thus, for your problem, try to reconnect the cable but correctly. In the case of no success, it would be useful to bring your machine to a technician or at least to an authorized service partner to check your machine/connections. Maybe they can find the error.

  Welcome them

• Lose the speech synchronization after mixing

  After spending a lot of time to synchronize my voice on the singer for most of the time very darn close it ok in multisession, but when I mixdown, synchronization is sometimes result. No reason for this and is at - it a correction/adjustment I can do before mixing. Some records are not a problem because you can go down singing a little without screwing in support, but others, you can't. I know good karaoke is the answer and they are used when it is available, but not always available, I'm afraid

  Just a thought - after you have made all of your changes and adjustments etc., save the session and then exit the session.

  Opening of the session, and then do your export/mix.

• activeDocument null after the events focused on LCD screens

  ====================================================

  Problem:

  ====================================================

  Prob 1) in a TitleWindow popup, I a Dataservice oriented LCD screens that populates an ArrayCollection «pictures» collection  See source below PreviewImage.mxml.  On a CollectionChange event on 'photos', I have a listener "dataChangeListener(event:CollectionEvent)."  In turn, this listener calls a static method NewsAgencyPhotoshop.updateMetadata (args).

  When an image is open in PS, depending on the NewsAgencyPhotoshop.updateMetadata (args) get the reference of the Photoshop document active, check if it is not zero, and proceed to update the metadata of activedocument via the "info" property  Example:

  App: application var = Photoshop.app;
  var docRef:Document = app.activeDocument;
  If (docRef! = null) {}
  var docInfo:DocumentInfo = docRef.info;

  .....

  However, every time I check if docRef is null, is null.  I use the same lines of code to get a reference to the current document in other functions like close() or writeWatermark(), and in each of these cases, the docRef object is valid (non-null).

  It seems that when a static function is called on the NewsAgencyPhotoshop manually by clicking a button or the activeDocument reference is good, but when calling a static function as an event listener for an event linked screens LCD LIQUID, then the activeDocument is always null.

  Why?

  Prob 2) I tried also to the activeDocument reference a static class variable, then the references in access to static functions.  In the open function (filePath), I instantiated the class static variables, like this:

  public static void open(filePath:String):void
  {
  App = Photoshop.app;
  var file:File;
  = new File (filePath);
  App.Open (file);
  app.activeDocument = docRef;
  }

  Using this approach, manual event-driven functions are working and have good docRefs, like this:

  Public Shared function writeWaterMark (): void
  {
  App: application var = Photoshop.app;
  var docRef:Document = app.activeDocument;
  var myTextLayerRef:ArtLayer = docRef.artLayers.add ();

  However, this works only in part with the function called by my LCDS change event listener, since the docRef is then not null it penetrates into the code block and attempts to write metadata to the activedocument, like this:

  public static void updateMetadata(filePath:String,_data:Object):void
  {
  App: application var = Photoshop.app;
  var docRef:Document = app.activeDocument;
  If (docRef! = null) {}
  var docInfo:DocumentInfo = docRef.info;
  docInfo.copyrightNotice = data.copyrightNotice;

  The problem here is that the docInfo.copyrightNotice line throws the following exception in Flash Builder:

  17/02/2011 00:08:44.226 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  : Error General Photoshop. Maybe this feature is not available in this version of Photoshop.
  -no additional information available >
  at flash.external::HostObject/__set()
  at com.adobe.csawlib::CSHostObject/hostSet()
  at com.adobe.photoshop::DocumentInfo/set copyrightNotice()
  to NewsAgencyPhotoshop$ /updateMetadata () [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/src/NewsAg encyPhotoshop.as:52]
  to PreviewImage / dataChangeListener () [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/src/PreviewIma ge.mxml:103]

  Your advice is appreciated.

  Thank you

  Steven Erat

  ====================================================

  Environment

  ====================================================

  Photoshop CS5 Extended 12,01 x 32

  Flash Builder 4

  CS SDK 1.02

  Extension Builder SDK 3.4

  MacBook Pro / OS X 10.5 / Intel Core 2 Duo clocked at 2.66 GHz / Procs: 1 / Cores: 2 / memory: 8 GB

  App, configured for Photoshop CS5 and Photoshop CS5 Extended

  ====================================================
  PreviewImage.mxml (popup)

  ====================================================

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:TitleWindow ' http://www.Adobe.com/2006/MXML "xmlns =" com.stevenerat.news. * ""
  title = "Preview Image" horizontalAlign = "center" verticalAlign = "middle" horizontalScrollPolicy = "off" verticalScrollPolicy = "off".
  paddingBottom = "20" paddingLeft = "20" paddingRight = "20" paddingTop = "20" width = "270" height = "550".
  creationComplete = "init (); ">

  ....
  
  < mx:Script >
  <! [CDATA]
  import flash.events.TimerEvent;
  import flash.utils.Timer;
  
  Import mx.events.CollectionEvent;
  Import mx.managers.PopUpManager;
  Import mx.utils.ObjectUtil;

  ....

  
  public void init (): void {}
  DS. Fill (pictures);
  ....
  }

  ....
  private void dataChangeListener(event:CollectionEvent): void
  {
  If (lblStatus appearing! = null & & imgIsOpen) {}
  lblStatus.text = "update of METADATA";
  setButtonState (false, true, true);
  Table: data var = event.currentTarget.list.localItems;
  for (var i: int = 0; i < data.length; i ++) {}
  If (.) Data filename [i] == this.fileName) {}
  NewsAgencyPhotoshop.updateMetadata(data[i].dirPath+data[i].fileName,data[i]);
  break;
  }
  }
  }
  }

  ....

  < mx:DataService id = "ds" destination = "NewsAgencyPhotos" autoSyncEnabled = "true" autoCommit = "false" / >
  < mx:ArrayCollection id = 'photos' collectionChange = "dataChangeListener (event)" / >
  < LocaleInvitez / >

  ====================================================

  NewsAgencyPhotoshop.as

  ====================================================

  package
  {
  import com.adobe.csawlib.photoshop.Photoshop;
  com.adobe.photoshop import. *;
  
  import flash.filesystem.File;
  Import mx.utils.ObjectUtil;
  
  public class NewsAgencyPhotoshop
  {
  public static var App: application;
  public static var docRef:Document;
  
  public static void open(filePath:String):void
  {
  App = Photoshop.app;
  var file:File;
  = new File (filePath);
  App.Open (file);
  app.activeDocument = docRef;
  }
  ....

  
  public static void updateMetadata(filePath:String,_data:Object):void
  {
  App: application var = Photoshop.app;
  var docRef:Document = app.activeDocument;
  If (docRef! = null) {}
  var docInfo:DocumentInfo = docRef.info;
  docInfo.copyrightNotice = data.copyrightNotice;
  docInfo.headline = data.headline;
  var keywordSt:String = data.keywords;
  var keywordAry: Array = keywordSt.split(",");
  for (var i: int = 0; i < keywordAry.length; i ++) {}
  docInfo.keywords [i] = keywordAry [i];
  }
  docInfo.caption = data.description;
  docInfo.city = data.city;
  docInfo.country = data.country;
  docInfo.provinceState = data.state;
  }

  ====================================================

  Console

  ====================================================

  [SWF] StageManager - 2.0.swf - 1 188 270 bytes after decompression
  17/02/2011 creationComplete() com.adobe.csxs.stagemanager.StageManager 00:08:18.971 [INFO]
  17/02/2011 00:08:18.981 [INFO] com.adobe.csxs.stagemanager.external.ExternalEventReceiver ExternalInterface callback registered.
  17/02/2011 00:08:18.982 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver ExternalInterface callback registered.
  17/02/2011 com.adobe.csxs.command.GetPendingStageManagerIdCommand 00:08:18.984 [INFO] call GetPendingStageManagerId via ExternalInterface
  17/02/2011 00:08:18.993 [INFO] com.adobe.csxs.command.GetPendingStageManagerIdCommand returned branchezBranchez StageManager ID. execute()
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.026 [INFO] adding extension CH
  17/02/2011 00:08:19.027 [INFO] com.adobe.csxs.stagemanager.model.ExtensionManager add extension com.example.helloworld.extension1
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.028 [INFO] adding extension BASICAMFCONNECTOR
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.028 [INFO] adding extension CSREVIEW
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.028 [INFO] adding extension HELLOPHO
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.029 [INFO] adding extension KLR
  17/02/2011 00:08:19.029 [INFO] com.adobe.csxs.stagemanager.model.ExtensionManager add extension com.stevenerat.news.extension1
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.029 [INFO] adding extension CREATENEWCSREVIEW
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.030 [INFO] adding extension NETAVERAGES
  17/02/2011 00:08:19.030 [INFO] com.adobe.csxs.stagemanager.model.ExtensionManager add extension com.adobe.rc.mymessages
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.030 [INFO] adding extension CHWE
  17/02/2011 00:08:19.031 [INFO] com.adobe.csxs.stagemanager.model.ExtensionManager add extension com.adobe.rc.operationalmessages
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.031 [INFO] adding extension HISTORY
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.032 [INFO] adding FRIO extension
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.032 [INFO] adding extension MINIBR
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.032 [INFO] adding extension BLCSLIVE
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.033 [INFO] adding extension CHSIGNIN
  17/02/2011 com.adobe.csxs.stagemanager.model.ExtensionManager 00:08:19.033 [INFO] adding extension swfpanel-onOne-0
  17/02/2011 00:08:19.034 [INFO] com.adobe.csxs.stagemanager.extension.impl.ExtensionLoader ExtensionLoader() record ExternalInterface callback loadExtension
  17/02/2011 00:08:19.034 [INFO] com.adobe.csxs.stagemanager.extension.impl.ExtensionLoader ExtensionLoader() record ExternalInterface callback unloadExtension
  17/02/2011 checkLoadingQueue() com.adobe.csxs.stagemanager.extension.impl.ExtensionLoader 00:08:19.035 [INFO]
  17/02/2011 com.adobe.csxs.command.GetLoadingQueueCommand 00:08:19.037 [INFO] call GetLoadingQueue via ExternalInterface
  17/02/2011 00:08:19.041 [INFO] com.adobe.csxs.command.GetLoadingQueueCommand execute() branchezBranchez returned to load extensions.
  17/02/2011 00:08:19.042 [INFO] com.adobe.csxs.stagemanager.extension.impl.ExtensionLoader loadExtension() com.stevenerat.news.extension1
  17/02/2011 00:08:19.045 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager Extension com.stevenerat.news.extension1 is not an extension plugin-> validate.
  17/02/2011 com.adobe.csxs.stagemanager.security.impl.ExtensionValidator [INFO] 00:08:19.049 in debug mode, the signature of the extension is not validated.
  17/02/2011 com.adobe.csxs.command.SetExtensionSignedCommand 00:08:19.053 [INFO] call SetIsSigned via ExternalInterface
  17/02/2011 00:08:19.133 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager doLoadExtension() Extension loaded com.stevenerat.news.extension1.
  17/02/2011 onCreationComplete() com.adobe.csxs.stagemanager.window.ExtensionWindow 00:08:19.230 [INFO]
  [SWF] / Users/stevenerat/Library/Application Support/Adobe/CS5ServiceManager/extensions/com.stevenerat.news/NewsAgencyPhotos.swf - 1 976 113 bytes after decompression
  17/02/2011 com.adobe.csxs.stagemanager.window.ExtensionWindow 00:08:19.369 [INFO] com.stevenerat.news.extension1 of the extension loading complete.
  17/02/2011 com.adobe.csxs.stagemanager.window.impl.SWFEventDispatcher 00:08:19.371 [INFO] com.stevenerat.news.extension1 of the extension loading complete.
  17/02/2011 00:08:19.396 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:19.397 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 onExtensionComplete() com.adobe.csxs.stagemanager.extension.impl.ExtensionLifeCycleNotifier 00:08:20.230 [INFO]
  17/02/2011 com.adobe.csxs.command.SetExtensionLoadedCommand 00:08:20.231 [INFO] call SetIsLoaded via ExternalInterface
  17/02/2011 dispatchInvokeEvent() com.adobe.csxs.stagemanager.extension.impl.ExtensionLifeCycleNotifier 00:08:20.233 [INFO]
  17/02/2011 com.adobe.csxs.command.CheckStartOnEventCommand 00:08:20.236 [INFO] CheckStartOnEvent via ExternalInterface call for com.stevenerat.news.extension1
  17/02/2011 onExtensionComplete() com.adobe.csxs.stagemanager.window.impl.WindowStateManager 00:08:20.245 [INFO]
  17/02/2011 00:08:20.252 [INFO] com.adobe.csxs.stagemanager.window.impl.SWFEventDispatcher dispatchEventToExtension() routing event type extension com.stevenerat.news.extension1 com.adobe.csxs.events::StateChangeEvent
  17/02/2011 00:08:20.257 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:20.258 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 00:08:31.858 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:31.859 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 00:08:33.333 [INFO] com.adobe.csxs.stagemanager.window.impl.SWFEventDispatcher dispatchEventToExtension() routing event type extension com.stevenerat.news.extension1 com.adobe.csxs.events::StateChangeEvent
  17/02/2011 00:08:36.394 [INFO] com.adobe.csxs.stagemanager.window.impl.SWFEventDispatcher dispatchEventToExtension() routing event type extension com.stevenerat.news.extension1 com.adobe.csxs.events::StateChangeEvent
  17/02/2011 00:08:36.683 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:36.683 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 00:08:36.718 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all

  .......
  17/02/2011 00:08:44.132 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 00:08:44.190 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:44.191 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 00:08:44.209 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:44.209 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  17/02/2011 00:08:44.225 [INFO] com.adobe.csxs.stagemanager.external.CSXSEventReceiver receiveExternalEvent() send CSXSEvent to all extensions...
  17/02/2011 00:08:44.226 [INFO] com.adobe.csxs.stagemanager.window.impl.WindowManager routing event of type com.adobe.csxs.internally.events.BroadcastEvent to all extensions.
  : Error General Photoshop. Maybe this feature is not available in this version of Photoshop.
  -no additional information available >
  at flash.external::HostObject/__set()
  at com.adobe.csawlib::CSHostObject/hostSet()
  at com.adobe.photoshop::DocumentInfo/set copyrightNotice()
  to NewsAgencyPhotoshop$ /updateMetadata () [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/src/NewsAg encyPhotoshop.as:52]
  to PreviewImage / dataChangeListener () [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/src/PreviewIma ge.mxml:103]
  to PreviewImage / __photos_collectionChange () [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/src/Pre viewImage.mxml:163]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at mx.collections::ListCollectionView/dispatchEvent() [C:\autobuild\3.4.0\frameworks\projects \framework\src\mx\collections\ListCollectionView.as:862]
  at mx.collections::ListCollectionView/handlePropertyChangeEvents() [C:\autobuild\3.4.0\framew orks\projects\framework\src\mx\collections\ListCollectionView.as:1224]
  at mx.collections::ListCollectionView/listChangeHandler() [C:\autobuild\3.4.0\frameworks\proj ects\framework\src\mx\collections\ListCollectionView.as:1096]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at mx.data::ConcreteDataService/dispatchCollectionEvent() [C:\depot\flex\branches\enterprise_ bridgeman_final_hotfixes\frameworks\mx\data\ConcreteDataService.as:4404]
  at mx.data::ConcreteDataService/itemUpdateHandler() [C:\depot\flex\branches\enterprise_bridge man_final_hotfixes\frameworks\mx\data\ConcreteDataService.as:4946]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.stevenerat.news::NewsPhoto/dispatchEvent() [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/s rc/com/stevenerat/news/NewsPhoto.as:26]
  at mx.data.utils::Managed$/setProperty() [C:\depot\flex\branches\enterprise_bridgeman_final_h otfixes\frameworks\mx\data\utils\Managed.as:383]
  to com.stevenerat.news::NewsPhoto/set description() [/ opt/Adobe_Flash_Builder4/NewsAgency_Ext/src/com/stevenerat/news/LocaleInvitez. as: 13]
  at mx.data::ConcreteDataService/updateManagedProperty() [C:\depot\flex\branches\enterprise_br idgeman_final_hotfixes\frameworks\mx\data\ConcreteDataService.as:5618]
  at mx.data::ConcreteDataService/updateMergedItem() [C:\depot\flex\branches\enterprise_bridgem an_final_hotfixes\frameworks\mx\data\ConcreteDataService.as:5638]
  at mx.data::ConcreteDataService/mergeUpdate() [C:\depot\flex\branches\enterprise_bridgeman_fi nal_hotfixes\frameworks\mx\data\ConcreteDataService.as:5155]
  to mx.data::ConcreteDataService / http://www.Adobe.com/2006/Flex/MX/internal:mergeMessage ([C:\depot\flex\branches\enterpri se_bridgeman_final_hotfixes\frameworks\mx\data\ConcreteDataService.as:2555])
  at mx.data::ConcreteDataService/messageHandler() [C:\depot\flex\branches\enterprise_bridgeman _final_hotfixes\frameworks\mx\data\ConcreteDataService.as:5199]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to mx.messaging::AbstractConsumer / http://www.Adobe.com/2006/Flex/MX/internal:messageHandler ([C:\autobuild\3.4.0\frameworks \projects\rpc\src\mx\messaging\AbstractConsumer.as:765])
  at mx.messaging::ConsumerMessageDispatcher/messageHandler() [C:\autobuild\3.4.0\frameworks\pr ojects\rpc\src\mx\messaging\ConsumerMessageDispatcher.as:261]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at mx.messaging::ChannelSet/messageHandler() [C:\autobuild\3.4.0\frameworks\projects\rpc\src\ mx\messaging\ChannelSet.as:1457]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at mx.messaging.channels::NetConnectionChannel/receive() [C:\autobuild\3.4.0\frameworks\proje cts\rpc\src\mx\messaging\channels\NetConnectionChannel.as:318]

  Steven,

  You have run into a bug Photoshop Mac involving events, a description, the workaround and the library are described here:

  http://cookbooks.Adobe.com/post_Creative_Suite_5_Extensions_and_Photoshop_CS5_Redu-17727.h tml

  You can download the library.swf as a sample project from this page. As you've seen, the problem is that after receiving an event, the active document as well as other references of Photoshop DOM will be null. Workaround kicks Photoshop by the valid DOM, essentially re - run your function with a valid context.

  As the book post was written by Bob, I used workaround often successfully, of course we are also working closely with the team of Photoshop for repair. Once again, as you have seen, it is a problem for LCD screens, but it is also necessary in frameworks such as PureMVC as well as FlexUnit.

  Here is my version of a line of code, that I put at the top of each function called by these events.

  If (Utilities.shouldForceClean ()) if (PsEventScrubber.getInstance () .forceClean (this, arguments, arguments.callee)! = null) return; Workaround

  Note you mentioned creating a static function, with a static, you can't use 'this', simply replace this with your class:

  If (Utilities.shouldForceClean ()) if (PsEventScrubber.getInstance (.forceClean (MyClassHere, arguments.callee, arguments))! = null) return; Workaround

  Finally, the Utilities.shouldForceClean () is my simple check that prevents even to make the call. Although Bob wrote PsEventScrubber to do an audit of the platform, I put this to avoid calling even when not on a mac. It is also for a function that could detect bugs and avoid making the call in a future version, when it is fixed.

  /**

  * Utility to specifically target Photoshop Mac Bug - Ps Bug # 2584580

  */

  public static void shouldForceClean(): Boolean {}

  Return (flash.system.Capabilities.os.indexOf ("Mac OS") == 0);

  }

  Let us know how it works for you.

  -Mark

• Data synchronization after restoring the database to the Source or target

  Hi DBAs,
  
  I've implemented replication unidirectional flow at the level of transactional database to the database schema (excluding some tables). It works very well without any problems after doing the tuning of flow with the help of health check scripts. My question is if some reasons, if I have to recover to the level of the database on the database Source then I need rebuild flows from scratch? Database size is close to 2 TB and after recovery, even using the pump data at the same time, it could take hours and also the source won't be available even after the recovery (data pump running job - if the source is online, then I was getting ORA-01555 errors and work was not).
  
  Please notify by above circumstances what is the best way to re - synchronize data between the source and target.
  
  Thank you
  -Samar-

  I would export of the datadict (build) once again, just to avoid any MVDD, something to do directly after the restoration of the DB,.
  because I'm not sure from the perception of this restoration DB in terms of DBID. Have you checked in rman if source db is considered to be the epitome?

  Then restart what are the messages in the target error queues. I think that you will have problems to move the first_scn
  due to differences on some YVERT in source/target system.logmnr_restart_ckpt$. system will think it has holes.
  You may need to manually remove a bunch of lines to allow the flow to jump on the fate of the YVERT
  that have been sent and are not present in the source system.logmnr_restart_ckpt$

• I registered synchronize after the reset my password computer and firefox and it won't bring back my bookmarks or settings.

  I recently had to "Refresh" my computer and redownload firefox. I couldn't remember my password firefox sync, so I reset it. Then, once he said that it is synchronized, nothing happened. I checked the forums and apparently there is a danger of information being deleted on a password reset, but I see no warning of this at all when I reset the password. Is it possible possible to recover my favorites? I've had hundreds, and many have been for academic work, I worked to years. Thanks for any assistance, you may be able to provide.

  When you reset the password of the account synchronization, and then it has deleted all data on the server, because the synchronization used internal key that is used to encrypt/decrypt data is generated from the password of the key of the synchronization.
  If, unfortunately, that your personal data will be lost unless you have a local backup, possibly a previous (shadow). copy in a folder C:\Windows.old.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

  "AppData" (XP: Application data;) Mac: ~ / library. Linux: ~/.mozilla) is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders