Write the key (path)

Similar Questions

• I just downloaded today 21/09/12 the Microsoft Home Student 2010 trial, but I forgot to write the key number. What should I do to fix this 3r.

  Gretings,

  Please need help here.

  I just downloaded today 21/09/12 Microsoft for home Studen 2010 Trial, but I forgot to write the key number.   I would like to try this software to see if it will work for me or not.  What should I do to get a product key?

  Thank you...

  When you register for the trial, the product key must have been sent to you. Check your Inbox or junk folder. Product key should also be a part of the Setup file to install the trial version.

• Open XML, how to write the path

  Hello

  I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed using the desktop software. Now, I tried to put the file somewhere else on the Blackberry and I don't know how wirte the path to the source code. I tried the following, but it seems to be bad:

  private static String _xmlFileName = "file:///store/home/user/documents/test.xml";
  DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              DocumentBuilder builder = factory.newDocumentBuilder();
              InputStream inputStream = getClass().getResourceAsStream( _xmlFileName );
              Document document = builder.parse( inputStream );
  

  I hope you can give me a hint, how I write the correct path?

  Thank you very much!

  Best regards, jtr87

  PS: Sorry for my bad English, but I did not use it very often.

  You need to do something like that to get your InputStream:

  /** * @return an open InputStream for a file, or null if file does not * exist. * @throws IOException if there is an error opening the file */InputStream getInputStream(String name) throws IOException {
      FileConnection fc = null;
      try {
          fc = (FileConnection) Connector.open(name, Connector.READ);
          if (fc.exists()) {
              return fc.openInputStream();
          }
      } finally {
          if (fc != null) {
              try {
                  fc.close();
              } catch (Exception ignored) {
              }
          }
      }
      return null;
  }
  

  Notice that you must close the FileConnection at some point, regardless of if the call to openInputStream worked.

• Get the key to series of windows 7 (PC formatted)

  Hello, I bought windows7 professional edition online. but now, I formatted my PC and don't remember the product key. (piece of paper I write the key is missing) is it possible that I can recover the key? I have my receipt numbers something in my email. Thanks :)

  If you can still start Windows, here are a few utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  Paid (free demo is available): Recover Keys: http://recover-keys.com/
  "quickly scans your system for more than 3000 + software '.
  and produces a list of software activation keys.

  13 keyfinder programs:
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  Note: Also check the side of your PC case or at the bottom of the laptop for the
  Key OEM code. If there is a sticker with the code, it will probably not
  corresponds to what is displayed by the utilities mentioned above as OEM such as
  Dell use an internal key code when they build your PC.

  The key on the sticker code should be used with your Windows CD
  (who came if everything goes well with your PC) If you need to reinstall Windows.

  J W Stuart: http://www.pagestart.com

• I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. »

  I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage.  You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows?  Y at - it an easy fix?

  Have you tried to manually install the hotfix by clicking on it, and as an administrator?

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• Microsoft Camera Codec Pack (16.0.0652.0621) - "couldn't write the Progid value to key" error - Windows 7 on Macbook/Boot camp

  I am trying to install the new codec from Microsoft to allow me to browse/preview of RAW files. I use Windows 7 as administrator on a MacBook Pro with the book Camp. The error I get is

  Could not write the Progid value to key
  \software\microsoft\windows\currentversion\explorer\fileExts codec\.arw\userchoice
  Check that you have sufficient access to that key or contact your support team
  I used the x 86 file on the site
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  Any ideas?
  Thank you.

  What a PITA, it was!

  1. go in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts

  2. right click on permissions

  3. click on advanced

  4 uncheck «include permissions inheritable...» »

  5. click on remove

  6. click on add

  7. tap all and press enter

  8. click on the control to total control

  9 check "replace all child object permissions...". »

  10. click on Yes

  11. click on OK

  12 run the installation. It should go right now

  Once completed

  Repeat steps 1 to 3.

  4. check «include permissions inheritable...» »
  5. check "replace all child object permissions...". »
  6. click on Yes
  7. click on all members of the list of albums
  8. click on remove
  9. click on OK
  This should be it. Hope this helps everyone and MS solves the problem.

• I purchased a download version of Lightroom 6 from Amazon and when I write the number of license keys I get this message "we are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

  I purchased a download version of Lightroom 6 from Amazon and when I write the number of license keys I get this message "we are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

• Re: Tecra A10 - 18 M - writes a key without pressing again and again

  Hi all

  I have the laptop Tecra A10 - 18M.
  The OS is Ubuntu 10.04, but the problem also occurs with Windows XP.

  I have problems with my keyboard. From time to time (once a day), a single character (r) written without pressing the key.

  When I press "r" key nothing happen. When I write a digit (1-9) or around the 'r' key (e, f, t,...) he began writing of many 'r' again and again.
  This stops by pressing the keys on the keyboard with the flat hand and a bit of strength.

  I think that there is a broken cable?
  Someone has a similar problem?

  Thanks for your help

  Hello

  Sounds like a keyboard or keyboard cable malfunction...

  But just to be sure: did you notice the same problems with external keyboard?

• Why the key changes from d minor to ground minor Middle song in Garageband?

  Title says it all, why the key automatically changing? I don't even think that you were able to change the key mi song in Garageband 10. It is a problem what I record in garageband after that Exchange (at the 42nd bar) not get moved down to adapt the new change of key. Also it doesn't let me change it back to d minor as anything I click has no effect. How can I stop the key to evolution?

  Thank you.

  Check the path to the conversion.

  In the track menu > see Transposition.

  You can define a conversion on the track, which changes the tone of the song from bar 42.

  

• Satellite P200 - 1 K 8 - lack of pressure on the keys at random

  Hi all

  I noticed that when sometimes typing on the keyboard, some keys will be not registered. So far, it occurs at random intervals, but usually keys such as a, e and o seem to be affected. For example, when you type this message I had to go back and complete lack of letters 3.

  It doesn't always happen, but is deeply frustrating when it does.
  Everyone knows about this problem?

  Thank you very much.

  Published by: ADMIN

  You said it happens sometimes and at random intervals?
  So, are you sure this isn't your fault at 100%? I mean, perhaps, that you write to fast and miss the keys?

  It of very strange that this happens only sometimes if it is really not easy to tell if it s a hardware problem

  What version of BIOS do you have?
  If a newer BIOS is available and then try to update

• AppleScript to obtain the physical path of a picture in the Yosemite photos app

  In iPhoto, we had this nice XML file with the metadata for each image in iPhoto.

  In the Photos of Yosemite application, there is no file.  So, I wrote an Applescript script that loops on each folder, subfolder, album, etc. and write the details to an XML file.

  When code loops, I have:

  Repeat with img in each media element of myContainer

  and I get these details:

  • file name: 2011-07-10 020. JPG
  • Keywords: 2011-07-10
  • name: missing value
  • Description:
  • favorite: false
  • Date: Monday, July 4, 2011 at 12:34:30
  • ID: 9XCpq6SzSD666TwlCHW8HA
  • height: 3240
  • Width: 4320
  • altitude: missing value
  • Location: valuemissing missing value

  But nothing in these attributes tells me where the actual image file is on the hard drive.  Anybody know a way in AppleScript to obtain the physical path of a picture in Yosemite photos app?

  Thank you!

  There are two categories of images within a library of Photos: 1) copied - no external location information stored (by default) and image is stored in the photo library and 2) referenced - only the pointers to the location of external images are stored in the photo library, and location information to real image from the file menu and context menu as file referenced in the Finder menu item slide show can be found.

  In pictures preferences: general Board, there is an import: box - copy items to the photo library. Apparently, this option is enabled by default, as it was the once Photos migrate my iPhoto library. It also means that I don't have category 2 above and the menu items are gray, because there is no location of external file stored in the photo library.

  More on that here on different application.

• How to write the comma delimited numbers of configuration file

  Hello

  In the attached Configuration File.vi write, I am trying to crush several whole decimal in the keys 1 and 2 of the attachment Test.ini. I am to convert the array of integers in a string. Because of this, the string written in the ini file is now being bracketed by apostrophes. What should I do to write the string without the apostrophes, as in the Test old.ini file?

  I appreciate your help. Thank you.

  Best regards

  Peter

  See here:

  http://forums.NI.com/T5/LabVIEW/configuration-string-keys-in-LabVIEW-2009-changes/m-p/1147371#M50489...

• The cancellation of the 'file' dialog box and handle errors caused by the empty path that makes the DB connection

  Hi guys.

  I developed a VI that connects to the database reads the names of tables, columns of the selected table, etc. It works well as I want to.

  However, I have problem with identifying the UDL file with function of dialog 'file' use in a structure of the event that is triggered when the button 'Open' value is changed. It also works well, when I choose the UDL file, but the problem is when I cancel it and I get the error 43.

  I tried to deal with this problem with a "error handler" function to clear the error 43 but the next errors that are associated with the database conncetion appeared. The reason is, when file dialog is cancelled, an empty path passes by reference of connection and I can't start the while loop where are the key codes. I also used a box Structure connected to "Cancelled" with 'DB connection tool' in case of real and connection the reference connection for the while loop, but I get the same result.

  I want to apply for work as: start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Thanks a lot for your help in advance.

  Hi lman,.

  start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Some pseudocode, easy to implement:

  WHILE
  
    onevent(OPEN button)
      FileDialog
  
    IF file selected THEN
      open database
      do calculations
    ELSE
      do nothing
    ENDIF
  
  WEND
  

  What is your problem with the help of loops and structures of the case?

• Write to file path control

  Hi all.

  I was wondering if it is possible to write to a file of trajectory control. Right now I use control path of file for selectable modules that is then written to a configuration file. From the beginning, I want the config read to write in the same path of file control. Instead, I have to read the configuration of a path of the file indicator file instead which is not ideal. Is it possible that I can write directly to the file control?

  Select this option.

  Right-click the control on the front panel, then select Create the local Variable. Then, drag this variable in the same place you have the led terminals. This will write the value in the control.

  

  You will hear many people say that you should avoid local variables (race conditions, hard to debug, etc.), but in this case, they are OK. I use all the time to initialize my UI to a config file.

  P.S. Did you put more thought into rewriting the code?

  P.S.S. you took my picture at the school 15 years ago?