Two button dialogue - fire once

Similar Questions

• Press ESC to exit two button dialogue

  Hello

  I have a dialog button two that I use to apply for the type of test done.  I would like to disable the ability to ignore the pop up dialog box if the user holds the ESC key.  Is there a way to do this?

  Thank you

  Mr. Bobby wrote:

  I have a dialog button two that I use to apply for the type of test done.  I would like to disable the ability to ignore the pop up dialog box if the user holds the ESC key.  Is there a way to do this?

  It seems that you want to remove the > esc > button assignment dialog box navigation.

  Just create your own (a Subvi simple with a few buttons) dialog box and assign the navigation key as you wish

  (Right click...... advanced navigation key).

  (for example don't assign it not the ESC key to cancel)

• Works on two buttons ActionScript, ActionScript on once is not.

  For some reason, the ActionScript code I have the two buttons in my game. When the program starts, it goes to the first page, which has two buttons leading to other scenes. These two buttons work. One of them is a button of the route leading to the instructions page. I have another button on my page of directions I want to go back to the title page, the scene with the two buttons. (By the way, I use ActionScript 2)

  The code I used for the first two buttons:

  {DirectionsButton.onRelease = function ()}

  gotoAndPlay ("Directions", 1);

  }

  {PlayButton.onRelease = function ()}

  gotoAndPlay("Game",1);

  }

  ------------------------------------------------------------------------------------------ --

  The code I used for the button to return to the scene of Directions:

  {BackButton.onRelease = function ()}

  gotoAndPlay("Title",1);

  }

  ------------------------------------------------------------------------------------------ ---

  For some reason, it is in the same format and exactly the same way as the other two buttons, but it WILL NOT work. The cursor turns into the hand instead of the arrow, but nothing happens when I click it. The codes are in the background of every scene, and each of them are buttons. Two of them work, but the other does not work!

  It's really boring, so please help me. Thank you in advance!

  Not that it of any consolation, but using scenes is not recommended practice - if you only do so for your classes, you should plan on oblivion of their use in the future.  Your can be troublesome without reason as you discover.  Just as an additional test, rather than use off all gotoAndPlay ("Directions", 1);   try to use _root.gotoAndPlay ('Directions', 1);

• dialog two buttons

  Hello. currently im doing a project to detect road marking using multiple special geometric criteria. My idea was when the user has two choices, the program prompts the user to choose which way to go. in my program, I used a marking 'go left or right' and I plan to use two button dialog box. However, it only appears once at the beginning of the program and no longer appears. is it something wrong with the loop or in my program? or if you guys can share an idea of how is the best prompt the user to make choices.

  I here enclose the program along with the models. any help is very appreciated. Thank you

  your code should be something like this

• My keyboard is not save when I try to use a button more than once.

  My keyboard is not recording that I use a button more than once and it's causing problems with typing and use / the overall experience from my computer.
  If I try to go back an entire word, it will be only a matter of erasing and then the keyboard does not recognize that I use the back button back until I have use another first. Essentially, I am unable to use a button more than once, unless I hit another key.
  This problem does not extend to the buttons of the mouse and trackpad.
  This problem is not just with the keys to the letter, with all the control keys.
  I use a HP Mini with Windows XP Professional.

  Hi Danielle,

  The first two thoughts that come to mind are supposed to check and "fiddling" the following:

  1 Control Panel > keyboard > Ketboard Repeat Delay and/or keyboard repeat rate.

  2 panel > Ease of Access Center > facilitate the use of the keyboard > disable filter keys or to adjust the applicable rates, if you want to use them.

  I hope this helps.

  Good luck!

  Kosh

• Formatting text in "function of two button dialog box."

  With monitors high resolution, the text in the Panel that displays the function of two dialog button is often small and difficult to read (at least for these old eyes).  Is it possible to format this text?

  Roy

  You can make your own.

  Make a simple Subvi with two buttons and a text indicator. Make windows style 'dialogue' appearance and add some logic (for example an event structure) to flip the button which was pressed.

• Using two buttons market timer / stop, need help please.

  Hey everybody.

  I am stil working on my project, and now I'm trying to implement a timer using two buttons market / stop. Everything I do now is when you press start the stopwatch starts and when you press stop I want the timer to stop and display the time.

  Whats happening is when I press start, the timer starts, but when stop is pressed the timer displays a value of say 12 seconds, a second more later I press stop again a value of 14secs arise and it stops at 14.  Now, whenever I press on start it will start at 14 and repeat this process.

  So I think that somewhere, I did not put my right timer.

  Could someone say somethings that I should change in my code.

  They are declared at the top:

  static public boolean status=false;
  static public int count=0;
  static public Timer timer;
  

  Here is my code:

  ButtonField start = new ButtonField("Start",ButtonField.USE_ALL_WIDTH|                          ButtonField.FIELD_HCENTER|ButtonField.USE_ALL_HEIGHT);                          start.setChangeListener(new Listener1());add(start);
  
  ButtonField stop = new ButtonField("Stop",ButtonField.USE_ALL_WIDTH|                            ButtonField.FIELD_HCENTER|ButtonField.USE_ALL_HEIGHT);                            stop.setChangeListener(new Listener2());                          add(stop);          
  
              public class Listener2 implements FieldChangeListener            {            public void fieldChanged(Field field, int context)             {            ButtonField btn = (ButtonField) field;            Status.show("Timer is at" + Integer.toString(count));            status = false;            timer.cancel();            }            }
  
              public class Listener1 implements FieldChangeListener            {            public void fieldChanged(Field field, int context)             {            ButtonField btn = (ButtonField) field;            Status.show("Timer started");            status = true;                try                {                                                timer = new Timer();                                        timer.scheduleAtFixedRate(new StartEvent(),1,1000);                }                catch(Exception e)                {                //do nothing                }            }
  
      private class StartEvent extends TimerTask    {    public void run()       {        if(status = true)              {              count++;                        }        else            timer.cancel();//        count=0;    }    }    }
  

  any help is appreciated

  Thank you guys

  

  Probably best to follow just a matter of a Thread.  So next time, you can start a new Thread with a new question.  However, you should also search the forum before asking questions, that your two supplementary questions have been answered in other posts on this forum.

  Concerning your problem to press the stop and get another moment, I think that you must have application logic that disables the stop button once pressed, until you press the Start button.  For example, you could do by assigning to the time of departure - 1 in the Stop button, and then, when you press the Stop button, he can check the start time and displays a message saying "Timer not started" If the start time is - 1.  There are a number of other ways to do this, I described this method because it is easy to explain.  It is not really how I'd do.

  The best way to set the buttons next, is to add then to a HorizontalFieldManager, then add the HorizontalFieldManager to your screen.

  To stop the button displays the menu, you must set it with the style CONSUME_CLICK, for example:

  ButtonField stopButton = new ButtonField ("Stop", ButtonField.CONSUME_CLICK);

• Synchronization of the configuration shows two buttons

  I have correctly set up Firefox Sync and used Firefox for a while successfully Sync in the PC Windows standard user on 3 computers accounts. However, when I tried to sync the administrative account on a computer, I was unable to. Since then, whenever I'm doing a tools/configuration synchronization, or Tools/Options/synchronization on all my computers, only two buttons to the top: "Create a new account" and "I have an account". There is no button 'Manage account', not related to Unlink this computer from Sync, nothing. I tried all kinds of things and I looked a long time for help on this problem and have not found something to help. If I delete my account just to start and complete synchronization, it will work, or could I be causing other problems by doing this? Any other suggestions? Thank you.

  What do you see in the list of menu drop-down menu button Firefox?

  Is - this set up sync or synchronize now?

  If you have 'Set up sync' then you seem to have lost the configuration of the synchronization and you will have to redo the set up Sync.
  
  If this is not possible, then try to delete (or rename) the armor in the Firefox profile folder file and reset synchronization preferences on the topic: config page.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  You can open the topic: config page through the address bar and to search for the prefs that begin with services.sync and reset set user prefs ("BOLD") through the context menu on the default value.

  If it still fails, then you can try a new profile.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How can I have two buttons for 'new tab' in version 4?

  In version 3.x, there is a removable button on the toolbar for 'new tab' plus a button '+' at the end of the address of the open tab I could click to create a new tab.
  In version 4, I can have the removable button, but I do not see how to add the button at the end of the address of the open tab. I can move the single button at the end of the address window, but I can't have two buttons.
  Is it still possible?

  You must drag the button new tab (+) of the tabs to another toolbar toolbar to make the second button to appear.

  "Firefox > Options > toolbars" or "view > toolbars > customize.

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.

• Satellite A350D-201 - pad touch and two buttons doen't work

  After updating the BIOS from version 1.6 to 1.8 the two buttons and the touchpad does not work.
  USB mouse works. Pointing device-enable (bios).

  I decided to reinstall Win7, in a time of installation the sensor does not work!
  Disassembled the laptop, I found nothing.

  Help!

  Have you installed the touchpad driver after the installation of Win 7?

  If so, you should also check if the touchpad has not been disabled using FN + F9 keys
  Also recommend that you check the setting in Control Panel-> mouse-> Advanced tab
  Here, you have to go into the advanced settings.
  For all I know, you could turn on and off several options of touchpad and touchpad functionality.

• How to add the full value of two buttons?

  How to add the full value of two buttons (any key) VI and display it in the output text box? I am attaching a sample program, but I know that his evil... Help, please

  Try this

• Two buttons

  I have two buttons.

  -first button on the left of the screen

  -second button to the right of the screen

  I try to do it like that, but it doesn't work)

  HorizontalFieldManager titleHFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_HCENTER);
  HorizontalFieldManager leftHFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_LEFT);
  leftHFM.add (new ButtonField ("Left"));
  HorizontalFieldManager rightHFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  rightHFM.add (new ButtonField ("Right", ButtonField.RIGHT));
  titleHFM.add (leftHFM);
  titleHFM.add (rightHFM);
  Add (titleHFM);

  Hello

  You can get this in overridng sublayout the title of Manager and not need to take the separate handler for each button.

  Try like this,

  HorizontalFieldManager titleHFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_HCENTER)
  {
  protected void sublayout (int maxWidth, maxHeight int)
  {
  setPositionChild (getField (0), 0, 0);
  layoutChild (getField (0), getField (0) .getPreferredWidth (), getField (0) .getPreferredHeight ());
                  
  setPositionChild (getField (1), Display.getWidth () - getField (1) .getPreferredWidth (), 0);
  layoutChild (getField (1), getField (1) .getPreferredWidth (), getField (1) .getPreferredHeight ());
                  
  setExtent (maxWidth, maxHeight);
  }
  };

  titleHFM.add (new ButtonField ("Left"));
  titleHFM.addnew ButtonField ("Right");

  Kind regards

  Lakshman K

• Two buttons in the title bar

  Hello

  Please, I need a help. I want to put two buttons in the title bar, but I can't (sorry, is my first application using Cascades).

  

  Can you help me with the code for the QML file?

  PS: Sorry, but my English is basic

  It's really easy to make!

  here:

      titleBar: TitleBar {
          title: "Title"
  
          dismissAction: ActionItem {
              title: "Cancel"
              onTriggered: {
                  // cancel code
              }
          }
  
          acceptAction: ActionItem {
              title: "Save"
              onTriggered: {
                // save action
              }
          }
  
      }
  

  Don't forget to mark as resolved and like my post if it worked!

• Display two buttons

  Hello

  I try to display two buttons. I wrote the following code:

  import java.awt.*. *;

  Javax.swing import. *;

  public class Gui32B {}

  Public Shared Sub main (String [] args) {}

  JFrame frame = new JFrame ();

  frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);

  frame.setSize (new size (300, 100));

  frame.setTitle ("a frame");

  frame.setLayout (new FlowLayout());

  JButton button1 = new JButton ();

  Button1.SetText ("I'm a button");

  Button1.setbackground (Color.Blue);

  Frame.Add (button1);

  JButton button2 = new JButton ();

  Button1.SetText ("Click Me");

  Button1.setbackground (Color.Red);

  Frame.Add (button2);

  frame.setVisible (true);

  }

  }

  His poster the 2 buttons, but there is no text on the first button. The 2nd button also has a transparent top rectangle. Some body please correct my program. I used the border and the flow of page layouts.

  Zulfi.

  Hello

  I am able to run the code:

  import java.awt.*. *;

  Javax.swing import. *;

  creation of 2 buttons

  no visible Button2

  public class Gui3 {}

  Public Shared Sub main (String [] args) {}

  JFrame frame = new JFrame ();

  frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);

  frame.setSize (new size (300, 100));

  frame.setTitle ("a frame");

  frame.setLayout (new FlowLayout());

  JButton button1 = new JButton ();

  Button1.SetText ("I m a button");

  Button1.setbackground (Color.Blue);

  frame.getContentPane () .add (button1);

  JButton button2 = new JButton ();

  Button2.SetText ("Click me");

  Button2.setbackground (Color.Red);

  frame.getContentPane () .add (button2);

  Frame.Pack ();

  frame.setVisible (true);

  }

  }

  Thanks for your link.

  Zulfi.