System can not recognize the driver for Epson R2400
Hello
I was a document of problem with my R2400 to power and thought start Id by simply reinstalling the driver and see if by chance that he healed. Oh dear! The driver from the disk was not found and the downloaded file from Epson will not install because my computer thinks its Vista 32 bit when its actually 64-bit Vista. The dialog box tells me that I have the wrong file and check if Im with 32 or 64 bit vista. Needless to say that really, but if as an act of desperation, I try the 32-bit driver it tells me exactly the same or bad file. In any case, for some reason, he refuses to recognize and install the driver. Ive been in touch with Epson and they checked their drivers and as expected, they seem well. Hope one of you can tell me what to do to recover my life photo printer if I can make some delicious prints that are ready and waiting. Arghhh!
This sounds familiar, here's the solution that worked for me:
I can't believe how easy the solution was... amazing that this simple solution has been so difficult to dig for!
All I had to do was go to the Device Manager and disable the PCI Standard improved to the USB host controller.
That's all! Turned on my printer and installed the software and I printed a page within 3 minutes!
How frustrating that it took me more than 30 hours to get this simple solution. But I hope that it can save someone else from countless hours and frustration.
I found the answer on CNET: http://forums.cnet.com/7723-12546_102-215320.html
Tags: Windows
Similar Questions
-
Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account
Mail asking me to "Enter your password for [my AOL account] in Internet accounts."
When I enter my password Internet accounts says it is "Impossible to verify the account name or password."
iMac (24 inch, early 2009)
Processor clocked at 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
OS X 10.11.1 (B 15, 42) El Capitan
Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.
The problems of Keychain - see post of khati
-
Wireless 802.11b/g/n LAN featuring single-band (2.4 Ghz), 1 x 1 technology
Ethernet LAN: Realtek RTL8151GH-CG
PCI and BCM43142A0 of Palivion HP 550 - 032L
Can not find the driver for OS: Windows 7-64 bit!
Help me, please!
Hello
Please try:
Wireless:
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_135105_1
Wired (LAN)
http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71102.exe
Kind regards.
-
Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer
Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer
And it is a Windows problem why?
P.S., A lot of people just leave the CF card and use a card reader:
http://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=CF+card+reader&x=0&y=0
-
Can not find the driver for my Satellite M40X-161 WLAN
Hello
I have a problem, I have the new system installed on my laptop - windows xp and I can't find a CD with drivers. I tried to download the drivers from the internet, but can not find the drivers for my laptop. I am looking for the drivers for the wireless card and it is not on Toshiba s page.
There are only drivers for windows vista - I tried, but it did not work. The other problem is that I don't know is my wireless card. At the back of my laptop it has the info that I have peripheral radio ar5bmb-43, but I can not find the drivers for this device.
Can someone help me to find drivers?
Thanks in advanceUnfortunately I wasn't able to find out what WLAN card is inside, but it must be Atheros or Intel, so I recommend you try to install the two drivers for Windows XP Home edition.
Two of them you can find on http://aps2.toshiba-tro.de/wlan/?page=downloads Portal Toshiba WLAN
Try to install Windows XP Home version for Atheros 9.2.0.419.0 or Windows XP Home version 9.0.4.39 for Intel.Please post comments.
-
Can not find the driver for my Satellite L555-10U display
Hello
I can't find the driver for 4500/5100 hd graphics card to upgrade my PC
It is pslw8e by Satellite L555-10UThank you max9z
I put t know what OS do you use, but all the latest drivers for the supported operating systems you can find on http://www.toshiba.eu/innovation/download_drivers_bios.jsp
-
Computer does not recognize the driver for HL-DT-STDVDRRWGSA-H2OL ATA Device
original title: HL-DT-STDVDRRWGSA-H2OL ATA Device
its as it disappeared from my machine. the computer will recognize the pilot but but the drive does not appear when I go to computer file. If you insert a cd in the drive, it runs but can not read the cd/dvd.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
problem to find a driver for my Toshiba satellite laptop that has a CD/DVGW TSST Corp TS-L632D ATA MK1637GSX ATA
pilot info (which is apparently a published Microsoft driver) for the device in the computer laptop Toshiba Satellite P200-RT5, full info about 2 years is:
TSST Corp TS-L632D ATA MK1637GSX ATA CD/DVGW
Windows version: 6.0.6002.18005 created: 21/06/2006; modification: 04/10/2009; size: 65.5 KB; Description of the file: SCS1 CD-ROM drive.
I can't find it on your site or Toshiba. My driver I think is damaged. My Device Manager, in properties, said to me:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
Can not find the driver for ISATAP adapter #4
Original title: ISATAP adapter #4
This device does not. Respomse is "Pascal find the driver for this device.
Windows says I have the latest version of the driver that is already installed
Microsfir can not find a solution
Help
Hello
Since you have posted in the forum Feedback and specifies your version of Windows
I had to guess as the operating system. It is best to post in the Forums Windows Vista of answers.
(Question was transferred in windows - Forum-Other/Unknown).Windows answers forums
http://answers.Microsoft.com/en-us/Windows-----------------------------------------------------------------------------------------------------
For Vista:
Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore errors
If you wish and on some computers, it will always be there but no problem to be expected.On a Windows Vista-based computer or on a Windows Server 2008 computer.
the Microsoft ISATAP map appears with a yellow exclamation mark next to it in
Device Manager and you also receive an error message
http://support.Microsoft.com/kb/932520Check the answer by Diana D. here:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a75e8bf1-9a63-4CF4-BF6C-d43a26175959I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
OfficeJet Pro 8100: Can not find the driver for the Officejet Pro 8100 online
I've recently updated to Win10 (the free update, I do not know how many bits). I also then changed my wireless carrier. Now my laptop is not connecting to the new hub, and it seems that there is no driver more - so I don't know if these changes are the problem, or one of them.
I tried to install a new driver and I first started the process, but the printer not print report pages, and then the laptop don't would not recognize the USB cable, even though it had been plugged in all the time. I tried to remove the cable and reinsert; also turning the printer market, but cela did not work.
I also have Virgin and with them her reset the hub, but the hub still not connect to the printer.
Now when I go to the page of drivers hp and it identifies my product, it then tells me there is no drivers for this printer now, and I should come back later in case they are developing.
I can't believe that this is true. Can you please give me a link to a page where I can find and install the driver?
May also explain why the cable USB is not recognized?
Thank you.
For your convinence: driver HP Officejet Pro 8100 that supports Windows 10
Last updated driver, click on "Support" tab above and "drivers software &" or just google.
-
ScanJet G2410: can not find the driver for Scanjet G2410 on OS 10.7
Hello.
I just bought a Scanjet G2410.
When I first ran the installation CD, the instalation of compleete with the following message:
"The «/System/Library/Extensions/hpPlugInInit.kext system extension" has not been installed properly and cannot be used. "Try to reinstall, or ask your dealer pour an update.
And when I tried to scan something I get the message:
"Scanner could not be initialized scanner not found."
So I tried to uninstall and reinstall the proper drivers.
But I can't find a driver for my version on Mac OS 10.7.
There are only drivers for 10.5 and 10.9.
Can you help me please?
Thank you
Paul
Hi Paul,.
Follow the steps below and let me know if this is useful:
First step: remove the existing software of HP Scanjet
1. go in the Dock, click on the Applications folder, and then click the Hewlett-Packard folder.
2. click on uninstall HP icon.
3. click on continue.
4. Select your scanner model and then click on uninstall.
5. click OK to complete the uninstall.Second stage: repairing disk permissions to avoid the potential conflicts
1. open the Applications folder.
2. go to the Utilities folder.
3. double-click on disk utility.
4 Select the hard disk that contains the boot volume.
5. go to the first aid tab and select Repair disk permissions.
Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.Third step: software full features installation HP for OS X 10.6 (Snow leopard)
Download and install the latest version of the software for OS X 10.6 from following link:
http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3423841&swItemId=sj_78355_5&swEnvOid=219
Step 4: install HP Scanjet update of OS X 10.7 (Lion)
Download and install the update to ensure that the update below:
Shlomi
-
Can not find the driver for Soundcard in Satellte A215-S4807
Hello world.
I bought my laptop in the United States this summer. When I came back to the Russia, I installed XP instead of Vista. But the problem is that the drivers do not work. I could not find a driver for the sound card, because I don't know what sound card I have. It is not specified on the official website of Toshiba. Where can I download the driver?
I really need!Thanks 4 your attention.
OK, here´s the solution for you:
you have a realtek installed soundchip. Www.realtek.com visit and download the rather for "realtek HD audio. This driver must match your chipset.
Good luck
Welcome them
-
Gradient of the Visa OS came with the PC for XP. Installed new HD and partitioned drive so there is no pass file.
I found that it is management of network integrated 10/100 Base-T interface but cannot find the manufacturer to use it Web site. In addition, been
playback ChipSet might need drivers or upgrade? Don't know that much about this, but enough to get in trouble if
I'm not "coached" through it all. Low grade was the Visa MS HP accompanying MS XP Professional. Need a link or help find the Driver for the network card.
Thank you.
Thank you very much... which seems to do the job for letting me use the network card. Once I installed the chipset you me too, my IE was able to get the net. The only thing that happened that I wonder about, what I choose to accept or not something RAID, which I accepted and it seems to work with one small annoying side affect: I can't get Windows Update to run. I get this error: 0x8024400a and I spent literally hours looking for and trying different solutions, which none have worked. Do you think that there is something that would change this Nvidia software which would cause that? I get out to the internet OK and can go to any web page. It runs a bit slow, but I thought it might be because I'm using a newly installed Win XP and it has only 2 SP. My next step in getting this thing to work was to run Windows Update and anti-virus stuff set. Any way, thanks again for your help.
-
Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4
I can only find 4100 series that does not install.
Ideas?
Hi sensho.
Welcome to the HP Forums!
I see you are trying to find the driver for your HP Deskjet 4180, with a new MacBook Pro with OS X 10.9.4, and I am happy to help you with this driver issue!
Please take a look at this website, OS X Mavericks v10.9: installing and using the printer on a Mac.
Hope this is what you are looking for and have a great day!
-
Portege A600 - can not find the driver for hotkey
Hi guys,.
I ve a problem with my laptop. I ve installed Windows 7 64-bit Professional on my device. Diver most were installed automatically by Windows. Other one I found on the homepage of Toshiba. But I can´t find a driver for my shortcut key. Sorry for my bad English.
Could someone help me?
Martin
Hey Buddy,
The driver you want to say is called Toshiba Value Package added and is necessary for the FN keys.
You should check the Web from Toshiba site again:
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jspIf you have any other questions, please let us know! :)
Maybe you are looking for
-
Why is to speak the text doesn't work does not correctly?
I get a circle turning for a while and no results. He used to work. I have the latest OS 9.2.1. I can see the memory. I have hard reset (home + power on button). I have reset the settings. Nothing helps.
-
Lenovo K3 Note Blutooth frequently disconnects
Hi, I brought K3 note recently for sale online. When you are using Bluetooth connected with my Sony music system, it disconnects frequently. It is very irritating me. I can't able to listen to the songs in my music system. Please help me solve this p
-
try to install the vista security update (KB97558) get error 800b0100
Get the error 800b0100 security updates
-
Access after you turn off the router/nat [WCG200 v1]
I use the WC200v1 for a while and it was a lot of work. I disabled the router/Nat and comes to be used as a modem only. After you disable the routing/Nat, you are given an IP address, which still allows access to the device. I don't remember what
-
"permalinks" to files on NTFS disk network
Hey, there, My office uses a shared network (NTFS) drive, and we are running Windows 7 on our individual machines. I want to do is be able to create hyperlinks between documents on the shared disk that will continue to run when the target file is mo