System elevated command prompt
do not prompt for administration
I need to access the hierarchy command prompt to join the account sys Im planing to make a few tweaks to my taskbar, implement a rotation to display the desktop and adding some defensive work to my firewall.
I know that its possible Ive been reading about all day, but there is a security file blocking the best way to access the account.
time / interactive "cmd.exe" did not work I got the following error
"WARNING: due to security enhancements, this task will run at the scheduled time, but not interactively.
"Use the schtasks.exe in interactive task utility is needed.
Schtask.exe is interesting because none of the switches back work. even in SafeMode invites
I tried to use psexec.exe to bypass around your security file of coarse it was also a bust.
tried to use the Task Scheduler to activate a system level command prompt, it worked but its ruin in the background. lol system d$ * #.
I then tried to get the interactive prompt by running to time / interactive "cmd.exe" in a batch file, calling it a scheduler of tasks that the system,
I should have seen it coming, he just ran in the background.
If anyone knows about the top of head how to access the account and hierarchy system prompt, pls gave me, but also don't size your time it get on my account if you do not know
Thank you
Use PsExec with the option/s: http://technet.microsoft.com/en-us/sysinternals/bb896649
Example follows:
-START SHELL BLOCK-
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\System32>whoami
antichthon\kj4ips
C:\WINDOWS\system32>C:\Users\KJ4IPS\Desktop\PsExec.exe/s cmd.exe
PsExec v1.98 - execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\System32>whoami
AUTHORITY NT\SYSTEM
C:\WINDOWS\system32>^C
cmd.exe is out on ANTICHTHON with the error code 0.
C:\Windows\System32>whoami
antichthon\kj4ips
-END OF BLOCK SHELL-
Tags: Windows
Similar Questions
-
What is the elevated command prompt
I am running vista and I supported the man-ware problem but I make a point of endpoint not found on my external drives when I try to share the show upward except when I click on them, they say, folder is empty, site says here if after enforcement of male ware to launch an elevated command sfc/s then prompt how can I do this please I can't lose the makings on my disks, they are my backups
How to open a command prompt in Windows Vista
http://www.Winhelponline.com/articles/158/1/how-to-open-an-elevated-command-prompt-in-Windows-Vista.html -
What is system error 5 in Vista command prompt
I do not join using the 'net administrate user' command in cmd.
http://www.Vistax64.com/general-discussion/214805-command-prompt-system-error-5-a.html
A similar problem is at the link above.
http://en.kioskea.NET/s/what+is+system+error+5+in+command+prompt+in+Vista
Various solutions to the above link.
This is what you hear: net user administrator / Active: Yes
If so, read above.
And read this also.
See you soon.
Mick Murphy - Microsoft partner
-
How to create an image system to the command prompt?
I need to create an image of 'system' and I can't have accdess Wizard "backup and restore".
Hi princesscontino,
Thanks for the question.
(1) what exactly happens when you try to access Wizard backup?
(2) there was recent changes made to the computer before the show?
(3) you have other programs of backup of other third-party backup programs?
You can configure Windows backup to run any way you want and also to create a task in Task Scheduler to run the weekly wbadmin command to create the system image. For the sup of wbadmin commands, see http://technet.microsoft.com/en-us/library/cc754015 (WS.10) .aspx
You must run wbadmin from an elevated command prompt. (To open a command prompt, click Start, right click Guest and then click Run as administrator.
"Wbadmin" command line utility and the utility is available only in Windows Vista Business, Enterprise and Ultimate editions and not in the Home Basic or Home Premium editions.
You can also check: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions
Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
Cannot run system utils in command prompt even if high in mode
Hello
Recently, I tried (and continued to try) to run chkdsk on a hard drive, to get the message "access denied because you don't have enough privileges." You have to invoke this utility running in elevated mode. "However, the command line is in high mode.
The exact command was 'chkdsk E:/r.
However, chkdsk runs on boot, OS, windows, master drive in the usual elevated command prompt. Run the command chkdsk command with its parameters from the command prompt was not a solution.
What should I do to activate myself run chkdsk on another drive? UAC is disabled and I have combed through policy to activate my account administrator full. The OS is Windows 7 Ultimate 64-bit.
In many ways, all leading to a prompt titled "Administrator: command prompt".
The first is to simply open the command prompt. Being in the Administrators group and have disabled UAC makes high command prompt by default. The second was to do a right click and "Run as Administrator", and the third was to open the Run dialog box and enter 'cmd', who was then created with administrator privileges.
However, the issue seems to have been resolved, and I am at a loss as to how or why. I don't know if it's something I've done or by chance, but at the same time I was interacting with the SYSTEM account to see if a guest has led to it would be able to run the chkdsk utility. It was, but then later I was also able to run the utility from the elevation prompt.
-
Run as administrator command prompt using the exec.vi system
I have an application that will not open unless it is executed via the administrator command prompt. I found a way to add a shortcut on my desktop to open (Administrator: elevated command prompt) but do not know how to open programically this program. Does anyone have a quick and easy solution to this? I want to open the administrator: elevated command prompt and then start writing my orders.
Thank you!!
Difficulty with the command line: cmd/r 'Elevated Command commandes.lnk ".
-
Recovery, the system failure - using the Command Prompt
Windows vista OS and windows does not load. Automatic recovery system active at startup upward. No solution known thanks to this tool, and when I try to use one of the system recovery tools, none of them don't function. I went in F2 start and checked to see if he recongnized HD for this. I don't have a windows vista startup disk system has been preloaded on acer laptop. can't even go back to a previous restore point. I checked the memory and it is 100% good. I have firewall and norton 2011 full security virus, so I think not only computer has been infected.
I started in 'safe' mode and tried to use the restore point - no luck. tried to go in windows in safe mode - no luck.
How do you use 'command prompt' computer startup tool and get in windows vista? What can I do using command prompt to check on this failure? Thanks, ej.
Windows vista OS and windows does not load. Automatic recovery system active at startup upward. No solution known thanks to this tool, and when I try to use one of the system recovery tools, none of them don't function. I went in F2 start and checked to see if he recongnized HD for this. I don't have a windows vista startup disk system has been preloaded on acer laptop. can't even go back to a previous restore point. I checked the memory and it is 100% good. I have firewall and norton 2011 full security virus, so I think not only computer has been infected.
I started in 'safe' mode and tried to use the restore point - no luck. tried to go in windows in safe mode - no luck.
How do you use 'command prompt' computer startup tool and get in windows vista? What can I do using command prompt to check on this failure? Thanks, ej.
Hey eacepay
Download and create an ERD for starting a Startup Repair restoring the system etc.
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable
Contact the computer manufacturer and ask them to send vista recovery discs
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
Walter, the time zone traveller
-
Trying to attack a NIC with the command prompt "arp s 010.010.014.100 00-20-4A-0B-1B-6B" and continue to be "ARP entry addition failed: 5" message.» Anyone know what this means?
I think it means that you do not have the correct privileges. Did you use an elevated command prompt?
You can do the same thing with the netsh command
http://TechNet.Microsoft.com/en-us/library/cc731521 (WS.10) .aspx #BKMK_setneighbors
-
(Admin) command prompt, Windows 7
How can I open administration command prompt
in Windows 7
Hello
http://www.bleepingcomputer.com/tutorials/Windows-elevated-command-prompt/
Method 1: Run as administrator of shortcut
The first method is to launch the administrator command prompt. This can be done by clicking on the Start menu, and then select all programs, then Accessories. You will see now a shortcut labeled command prompt. Right-click on it and select run as administrator as shown below.
Run as administratorWhen you select run as administrator a user account control prompt pops up asking if you want to enable the command prompt to make changes on your computer.
User account control promptClick on the Yes button and you will now be at the prompt, as shown below.
Elevated command promptSee you soon.
-
Can not enter in the command prompt
I recently needed to go in my command prompt to check something, but when I tried it, I couldn't find it. I tried to go through a few things, but I have not yet get what anyone. I have a Windows 7 Pavilion g7, if that helps. Thanks in advance!
Luke,
Have you tried to open it in administrator mode?
Click the link to see what I mean
Or
http://TechNet.Microsoft.com/en-us/library/cc947813 (v = WS.10) .aspx
-
IAM using window 7 Ultimate
Maybe
-
How to hide the command prompt window when using exec system
Hello, I use the exec system VI to do some transfers of files for a LabVIEW application. I'm afraid that the black white scroll text command prompt window that appears when exec system is called might scare users this LabVIEW application non-tech savy. Is there a way to hide the command prompt window?
Feed a REAL running reduced entry.
Mike...
-
a way to talk to the command prompt without using exec.vi system
I had used exec.vi system in recent weeks to send commands to the command prompt and then bring back the exit in labview. All of a sudden this week the vi does not work and I can not even an exec.vi system output when I send the same commands that I sent before. I was wondering if there was another way to send & receive orders from the cmd prompt in labview without using exec system?
-
The system restore. I can't even to safe mode or a command prompt.
How should I do system restore when I can't even at a command prompt or safe mode. I tried to open using two techniques, but the computer crashes as drivers are loaded. all this happened after I had an automatic download of the latest updates of microsoft xp.
The good news is that you have an installation CD of Windows XP (from what you describe). The method described here should work for you:
http://support.Microsoft.com/kb/307545
Type carefully!
-
system files and command prompt does not work
For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).
I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system. When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.
I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much
Please provide additional information on your system:What is your system brand and model?What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..The afflicted system has a CD/DVD drive work?You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?It seems that your system has or has had a malware infection.What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? System Restore is not a time machine...You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.Don't forget to fix the problem and the difficulty not only the symptom of the problem.If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).I run a few scans of such malicious software indicated below, then work on all the remaining issues.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary. System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.Restart your system and resolve outstanding issues.If your system restore calendar is always to show just a blank white screen, do the following:The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).Re-record the dll is correct, even if they do not need re-registration. You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.Click Start, run, and in the box enter orders following one at a time. Click the OK button to execute each command one at a time:regsvr32 jscriptregsvr32 vbscriptregsvr32 /i mshtmlThe last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.Check your system restore calendar now.Do, or do not. There is no test.
Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.
I decided to implement the points for a new puppy instead of a pony!
Maybe you are looking for
-
How applications can be transferred between iPhones
With iCloud, my transfer from an iPhone 5 c for an iPhone that is has gone well, but only one application, which no longer exists, but it works perfectly on the 5 c, did not come. How can I move it to my self?
-
Libretto U100 - issue of drivers
Hello Please can you let me know how to check that I have the latest video drivers? Thank you very much.
-
cannot down app.to of the old norton.say window.
do not download norton.say my windows to old app.is.
-
NETFramework will not work research restoration help and user account blank screens
When I try to access the microsoft fix option it says need net framework, but it is installed to restore the white screen go to the empty user account go to help the screen white screen
-
BLUE SCREEN - 0x000000fe downloading a program
original title: SCREEN BLUE MY WIN7COMPUTER WITH a NEW FIRST NIGHT! PLEASE HELP ME. I just bought a new HP Pavillion dv3 with 64-bit i3Core and you already have a blue screen! The only thing I did with it was to copy the folders my DOCUMENTS and DOWN