Similar Questions

• ID package already in use, an error has occurred during the recording of output ' 1.1.0"to the database.

  Hello

  I currently have an application called "Apa Doanya' (id 33020976) for BB 7 and below. Now, I created another version of it for BB10. To publish this version BB10, I created a new application named also "Apa Doanya' (id 46317888), download the file bar, but not yet to introduce the new application for review. Later, I changed my mind, I want to release this BB10 version under the name of my current application so that I can keep the sides and the current download figures. So in my application, I added a new version, download the folder bar and increment the version 1.1.0. But I got an error when recording on step 5, he said:

  Package already in use ID
  An error has occurred during the recording of output ' 1.1.0"to the database.

  I tried several times but no luck. What has caused this? Is - it because I already download the bar file to another application (id 46317888)? Just to be sure, I remove bar app 46317888 file and download a dummy cod file (so that the application can be saved). Then repeat the previous step (add a new version and so on) but I still have the same error.

  Really appreciate any help.

  -Hammemi - D

  Hi erik,
  Thanks for reminding me

  Yes, the problem is now RESOLVED. It was, I think, a bug/error on their part (support of the seller) so they erased the package id (I quote: "the package ID has been deleted.").

  Thank you very much :-)

• Communication error has occurred during the last request please check connection.

  I get this error, Communication error occurred during the last request please check connection.

  Request failed with the following error message:

  301 moved permanently

  Nginx

  --.

  You want to start the last request?

  Original title: Communication Error Message

• Getting the error "System 5 error has occurred" during the startup of service SQL in Windows 7.

  I'm restarting SQL server, what I used to do via the following command line:

  net stop mssqlserver
  net start mssqlserver

  However, I am on a new Windows 7 machine and I get the following error when I try:

  net start mssqlserver
  System 5 error has occurred.

  Access is denied.

  My account is a member of the administrator group, and I can restart normally through the Services Control Panel.  I have tried to turn the UAC settings all the way down, but still this message.

  (This also fails if I try to use PowerShell.)

  What should I do to be able to restart the services via the command line?

  Thank you
  -Peter

  I had exactly the same problem:

  1. new installation of windows 7
  2. net start MSSQLSERVER fails with "Access denied" from the command window, but works at the start of Service Control Manager
  3. connected as a user of Directors of the Group - same account used for the automatic start
  4. I tried the above steps to register. They do not work.
  5. I tried to settle my UAC account at the lowest possible level, as recommended in another forum. It also did not work.
  I was amazed by the number of desperate people with similar problems - and apparently some resolutions there. I've used Windows 3.1, Windows NT, Windows Server 2003 and Windows XP a few years back and then switch to Mac OS X and Linux. Now, I'm hard to get used to this kind of problem again, (sigh) Windows.
  In any case, one of my colleagues just came and gave me an easy solution. He said that the problem is that your user 'administrator' is not ' administrator enough "-go figure. In fact, being in the Administrators group is not the same as being THE administrator account.
  1. create a shortcut to 'cmd.exe' on your desktop.
  2. click right on the shortcut and select "run as Administrator".
  3. in the command window that opens, "net start MSSQLSERVER" works
  Good. So now I can go on this restart-SQL-Server-when-it-decides-to-die script for our customer site. Another sad story of Microsoft...

• NET USE error: '67 system error has occurred. The network name cannot be found. »

  Original title: NET USE worked for error.

  OK I used the following with a RDP'ing of XP in a server of S2k3 years:

  NET use lpt2 \\SERVERNAME\printername /persiternt:yes

  now, I get a "system error 67has has occurred. The network name cannot be found. »

  What made me state was I restarted my XP machine.

  What I've done since then rebooted the box of the network, hubs, Wireless DSL modem router and the win 2 k 3 boxes with the same results...

  suggestions?

  Hey cvs334, would you unplug the ethernet cable from all these devices ' network box, hubs, Wireless DSL modem router and the win 2 k 3 boxes "then unplug the power cord for each. Then after about 60 seconds, connect waiting for DSL modem for sink power cord. Then plug the router after sink connect the router to the modem, and then connect the hub and other devices. This allows the automatic redirection Web DNS router to the modem. The router may be failing or the router LAN port may be faulty.

• Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

  Hello

  I still have the "system error 1068. The dependency service or group was able to start.

  "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

  I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

  I tried "restart the spooler to print the title of the services, it does not, with the error message above.

  I have check the dependencies and it say HTTP and RPC

  I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

  I went to regedit and found the keys as follows I don't know if its correct:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

  'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

  "Group"="SpoolerGroup."

  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

  'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" =: 00000002

  'Type' = dword:00000110

  "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

  70,00,00,00,00,00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

  00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

  69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

  00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

  6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

  "Close" ="PerfClose."

  "Collect"="PerfCollect."

  "Collect Timeout" = dword:000007 d 0

  "Library"="winspool.drv".

  "Object list"="1450".

  "Open" = "PerfOpen."

  "Open Timeout" = dword:00000fa0

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

  Any other advice would be greatly appreciated...

  Hello yan_dao69,

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Ideally, this would set the print spooler service issues.

  Method 2:

  I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3:

  Check the dependency of the spooler services in the registry.

  a. Click Start, type regedit in the search box and press ENTER.

  b. look for, and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  c. right-click on spooler, click Export, save a backup file on your desktop.

  NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

  d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

  e. in the value data box, delete the other keys and then click OK.

  f. exit the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Here are the details of the error that occurred during the installation of nero 8.

  Details Product: Windows operating system ID: 1000 Source: Application error Version: 5.2 Symbolic name: ER_USERCRASH_LOG Message: Failed module %3 failed application %1, version 2%, 4% version, address failure 0 x %5.

  Please help me on the following error message, I tried to install nero 8 on my pc at home, but he could not install. I use nero oem disc 8.

  Hello chanderkant,

  Where did you get the disc for Nero 8 OEM? Is it preinstalled on a computer on which store your purchased in a retail store?
  If so, it may be that the OEM software works only with the preinstalled computer where it was originally installed. It depends on the license to the
  the computer manufacturer.
  You can contact your computer manufacturer and ask questions about the Nero 8 disc.

  Or you can post in a community forum, if the OEM has one.

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Mail - "a few errors have occurred during the processing of requested tasks"

  I get a window every time I have bring to the top of the box mailbox Windows that indicates that 'the host 'YAHOO' could not be found. Check that you have entered the server name correctly - the Yahoo Acct. "Protocol: Pop3, Port: 110, secure (SSL): no, SocketError:1101, error number: Ok899CCCOD.

  There are displayed (hide) (cancel) (Review) boxes which do not appear to cause the return of this particular window to solve.   When I click on 'Review' there is another window appears which States "1 of 2 tasks are completed properly" when I click on "Hide" the window closes but will repeat whenever I visit the Windows Messaging page.  I've not been able to find an answer to this situation, although I did a lot of research to help and support without result.

  You will appreciate any useful info that can clear up this episode.

  Hello RenoMac1,

  Solution: -.
  In all likelihood, your mail server does not work. The ISP (or internal it Department) brought the server for maintenance. Perhaps the server was interrupted due to other problems, or there is a problem with the connection.

  There is really nothing you can do but wait, and keep trying. If the problem persists for a long time, you can call your ISP (or internal it Department) and find out if there is a problem. You can usually find out if it's a connection problem trying to access the World Wide Web using your browser. If you can access the Web, you can assume the connection is good, and the problem lies in the server. Some access providers offer network status reports on their Web sites. You can see the status page of the network on the Web site to see if the ISP knows the problem and is working to fix it. If this is not the case, call your provider and find out if this is a known issue. In most cases, the problem is on the side Server and not with your PC, and you have to wait for its resolution.

  --

• Errors that occur during the iTunes Installation

  Product name: iTunes

  Processor speed: 1.50 GHz

  RAM: 4.00 GB

  Operating system: 10 64-Bit Windows Home

  After leaving my laptop sit idle for a few days, I tried to open iTunes last week, and an error resulting in a ToolTip telling me that a file has been moved, deleted, or damaged. The error message was "error 0x000012f".  I uninstalled iTunes and tried to reinstall to fix the problem, but it does not, because I now have problems with installation of iTunes. Can someone help me?

  

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Error: "some errors have occurred during the processing of requested tasks". Sending emails from Outlook Express

  Original title: Repetitivet sending emails from Outlook Express

  When sending emails from my Outlook Express , the following occurs:

  (1) as usual, send the message falls into my Outbox and begins to be sent.

  (2) when the message was sent, I get a message that "some errors occurred while processing requested tasks" but no actual errors are displayed.

  (3) the sent items folder does not show that a message has been sent... but a message has been sent.

  (4) the original message remains in my Outbox and will be sent over and over again.

  As you can imagine, it's a very embarrassing problem.  All suggestions are welcome, but please keep the instructions clear and simple.

  Ed *.

  Hello

  Windows XP Service Pack 2 is installed on your computer? To work on this question, see these steps.

  It seems that there is a corruption of dbx file.

  I suggest you go over your messages out of the Inbox, and then create new folders Outbox and sent items after you move the messages you want to save to a local folder that you create.

  Reference:

  (a) click onTools

  (b) thenOptions

  (c) selectMaintenance

  (d) Record Store will reveal the location of your Outlook Express files.

  (e) Note the location and navigate on it in Explorer Windows or, copy and paste to start and select run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden.

  To view these files in Windows Explorer, you must enable Show hidden files and folders

  Reference:

  (a) clickStart

  (b) Control Panel

  (c) Folder Options icon

  (d) notice, or in Windows Explorer

  (e) Tools

  (f) the Folder Options

  ( viewof g).

  With Outlook Express closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open Outlook Express.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Reference:

  (a) clickOutlook Express at the top of the the folder tree so no folders are open.

  (b) click onthe file

  (c) work offline (or double click working online in the status bar).

  (d) file

  (e) file

  (f) compact all folders. Wait for the compaction to complete.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend about a300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Compact often as specified above.

  Reference:

  (a) in the Tools

  (b) selectOptions

  (c) maintenance:

  (d) uncheck Compact messages in the background and leave it unchecked. (N/a if running XP/SP2).

  And backup often.

  See also: error messages when you send and receive in Outlook and Outlook Express http://support.microsoft.com/kb/813514

  An Outlook Express basic repair kit

  http://support.Microsoft.com/kb/2398839

  Hope the information is useful.

• Windows Live Mail a few errors have occurred during the processing of the task. Please see the list of errors below for more details.

  How is it, I always get this message every time I check my e-mail. On the one hand there are no errors below. Is there a way that this error can be fixed? If so, how?

  Windows Live Mail has its own support forums at the Windows Live Solution Center . Ask any question you may have in any of the forums on the right side of the this page. You will probably be asked to give your version of WLMail and Windows so that the answer may be more accurate. In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
  It would be useful to know a little more about the problem. Do all tasks in case of failure, or perhaps only the first on the list? Each time I check my e-mail address means whenever you click send/receive (or Sync, according to version)? Or maybe only every time a scheduled send/receive takes place?
  There is a bug in WLMail 2011 described by Peter.R shortly after he was released a year ago: a shipment / automatic reception fails on behalf of the city in the first place the mail in the task list if the include this account when checking for new messages is selected for a news account. To work around it, right-click on the name of the news account in the folders pane, select Properties and uncheck the option on the general tab, delete the account can make things worse.

  Noel

  updated information hit. Windows Live Mail forums are just around the corner under Windows Essentials

   

• Error read-only during the Windows XP networking with a Windows Vista-based computer

  Help, please.  We have set up a working group, the destop with Windows XP behaves as the server and laptop with Windows Vista is the other computer.

  We can share and open all files.

  The problem is with a mortgage loan software. (Chalice)  On the Vista computer, when you try to open a file, we get the error "the file is used by someone else.  You want to open the file in read-only Mode? "We have worked with their Tech Support who insists on the fact that it's a Microsoft set up the problem with the server computer.  In their diagnosis, they say that the cause may be "the server has locked files or you don't have full access to the records.  Their Technical Support remotely connected to our two computers and verified that we have the network set in place correctly-"everyone" has full control of the files.  Both computers have disabled the Windows Firewall.  How can I check if the file is locked by the server?  And why would he block specifically for mortgage loan software?  Any other troubleshooting help would be most appreciated.  They have guaranteed that this software can run on both Windows XP Vista computers & a set.

  Another question - when I right click on the folder that this error message, and then click Properties, on the general tab, attributes, the 'Read only' box is populated with a solid green box.  It can also be a check mark or a cache.  I deleted the solid green box and tick, apply settings, but still no luck.  What is the difference between the solid green box and the checkbox for that?

  Thank you to those who can help - we are really at a loss!

  Edit:

  Additional info - The Windows XP computer using IE 8, 32-bit, Windows XP, Media, 2002 Edition, SP3.

  The Windows Vista-based computer uses Vista Home Premium SP2, IE 8, 32-bit Edition.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• I receive the error "an error occurred during the scan" on HP Officejet Pro 8500 a

  When I try to scan a document, I get error "an error has occurred during the analysis".  It will occur at each attempt of third analysis or during the use of the document then automatic flow.  I have a HP Officejet Pro 8500 a on a Windows 7 64-bit operating system.

  Hi mdewitt,

  I appoligize we do not have a program scrub for this software package. I would like that restart you the equipment in the following order. Turn off the router, printer & computer and reboot the router. Once the router is completely reloaded start the printer and the computer. Let me know if you can scan using the HP software. If you are unable to scan using the HP software open paint and try scanning from Microsoft Paint.

• BlackBerry Z30, an error occurred during the installation of the software

  Hi all, hope someone can help. I have a new Z30 which does not seem device for Outlook synchronization. When I remove/open email on the device, it does not have the same on my Outlook on the PC, but it does not vice versa (i.e. When I remove/open an email on my Outlook on my PC's did the same thing on the device). In order to solve this problem, I thought download drivers/software may help, but when I try to do it I get an error "an error has occurred during the installion of the software. Some of the previous versions of the software installation files cannot be deleted. Make sure that no other application is using these files. I'm went into Control Panel and tried to remove the old version but cannot find all programs installed RIM or Blackberry. Am I missing something here? would be very grateful if someone could help that may have had a similar problem? Thank you, Hannah

  Starting from the hub, select the overflow menu down/right 3 points. Then settings > display and Actions. This screen offers a framework for "delete On". If this is set to 'Hub' only, then the behavior is as expected... change the setting you want.

  You can also try remove and reinsert the account from scratch... sometimes that helps things.

  Unless... you found "it is a working device"... If by that you mean that this is a BES compatible device, then you should work with your BES administrator.

  Good luck!

• An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file. I use ipconfig /renew6.

  Hi all

  I use version 2.1 of WINPE. It works with ipv4 network services.

  I have a "Windows2008R2" machine in my network. In this server I am running a DHCPv6 server in my network. This server is the allocation of IPv6 addresses to all computers that have the OS Vista and Win7, etc (for vista and above).

  But I'm not able to receive the ipv6 address for winpe2.1 pc which is my test pc.

  What are the basic things I should do to receive the IPv6 ip address.

  If you please suggest me that how I can solve this problem.

  I tried to have run the command as "ipconfig /renew6" but he throwed an error

  An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file.

  It is very urgent for me. I ask if anyone knows the steps so that the WINPE2.1 system get IPV6 will be appreciated.

  Thank you very much.

  Andy

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in the community of Windows Server above with your questions.

  See you soon.

  Mick Murphy - Microsoft partner