System File Checker does not not :(

Similar Questions

• System File Checker does not seem to fix corrupt files.

  I ran sfc/scannow and at the end he said he found and repair corrupt files. However if I run a second or third or 4th time it always says the same thing as if corrupted files were not repaired.

  Hello

  It's the usual message that some errors are not really causing all the problems.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  =========================================

  If necessary to fix the Vista installation:

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows system file checker (sfc.exe) for vista

  for some time I have been questions in Microsoft questions and things answers.mainly does not properly in my computer.now that I just learned that I have a System File Checker tool in my computer that finds all windows corrupt the file in my computer and fix it.and if I have windows files missing they will replace it... I didn't know I had.it States if your computer is slowing down or crashing, no matter what material is slow or does not work it is most likely that you have a lack of windows file or a file that is corrupted .you can find your rejection to start your computer.now wouldn't great if it could come in automatic mode say every month check on your computer, repair files lost or corrupted, if your computer runs like new. I an engineer coming around today to tell me any it.because as I said I'm on over the years and a lot about computers, I don't have really know.like much people.if it is a tool to help us with our computers, we should use it.please Microsoft allows to get this working so its on our computers automatic to keep running as new.also whole body outside their who can help me with more info about system file sfc.exe.would auditor all be aid.

  Bob

  http://support.Microsoft.com/kb/929833

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  System File Checker is not a universal solution, but it can help in certain situations.

  You really ned to determine the nature of the error before deciding on solutions.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• the button new folder does not have System File Checker says no breach of integrity

  Mem of Windows 7 64 bit, Sony VAIO, 8 GB, the latest journals to install checked no found error. Keyboard shortcut for the new folder does not work, but good ciick new-folder is there and works. Said it was problem-no hard drive problems, File Checker said no violations. Did usual defrg, reg cleaner, virus scans, etc. New folder button Windows Explorer stopped working after I upgraded my backup of instant backup software Memeo Memeo Backup Premium. When I return at the moment (the button) works when I uninstall Instant, it works, but when I insall Premium button no longer works. Explore premium a integration of windows and instant does not work. I say that the problem is because of this, but of coarse Memeo said it's a hard drive issue or microsofts problem. No hard drive problem, it's almost all scanned and new directions. The registry is scanned. I played in windows since 3.0.Granted I'm not a programmer, but I put togeather computers (all Windows Basic) since the 1980s. Did do a little programming for timex sinclair Boy I'm giving my age :) away  I solved just a poblem resolved not technicians at Sony. They told me that my only option was to restore my computer to factory State and again UGH!  Found the problem of sony, a former .exe file which does not have ugraded when needed, the deleted files and the sony program now works fine!  If the ideas on my "new folder button?

  Found the answer! It was just like I thought Memeo Backup Premium has a subprogramme called backup that he mixes with the Explorer of Windows 7, uninstalled this (backup) and the new record button works again. Memeo people had me uninstall the rest of the software and gave me a link to download the software less backup. Now, I'm trying to find out if I will return my money or a fixed copy. No answer yet! But I don't think they work on Friday, so I'll have to wait beyond Monday to see if they're going to answer me. I tracked their problem they should pay me ;)

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• When I run scannow this returns C=\Windows\Logs\CBS\CBS.log when I try to look at this file it does not?

  When I run scannow this returns C=\Windows\Logs\CBS\CBS.log when I try to look at this file it does not?

  also tried on high administrator.

  'c' not recognized as an internal or external command, an executable program or a batch file.

  I have a laptop windows vista, the 3gig of ram, I removed a lot of pictures and school work to free up space, also done a system restore. Hoping that this would remove the corrupted files, badly how I was.

  Can I get some advice please as to my next step.

  Thank you

  Hello

  see if that helps you

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Office work 9 spell check does not

  Hello

  When applying for a spell check on Works 9 it says files missing needs a reload.
  I can't as it came preloaded. New laptop to 2 weeks of age.

  It came with the trial of OFFICE 2007 which I use. Spell check works OK.

  Spell check does not work on enamel, but fixed by changing to non-English chossing then English.

  Thank you

  Ray

  > The message I get is 'Works cannot finish checking the spelling and grammar because an error occurred. Some files may be missing or damaged. To resolve this problem, please reinstall Works.

  In your case, you will need to reinstall the complete picture Toshiba because of my knowledge, this software is just part of the picture, and it was not delivered the external drive of Microsoft.

  So if you want to get a disc from Microsoft then I guess you'll have to pay for it.

• My spell checker does not work on my OE longer since I installed Microsoft Works and I don't want to change my e-mail program.

  SPELL CHECK QUESTION

  My spell checker does not work on my OE longer since I installed Microsoft Works and I don't want to change my e-mail program. This spellchecker programs seem to work better with OE.

  Thank you

  Read on...

  OE 6 doesn't come with it's own spellcheck. You need to Word or MS Office program, before 2007. The spell checker in Works 4 to 6 will work with OE, but not other editions. If you do not have such a program, you can download a free spell check to one of these sites.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• spell check does not work correctly. It highlights each word

  my spell checker does not work correctly. When I send a message it highlightes, virtually every word and all are spelled corectly - help please

  You use Outlook Express when you see this? Office Word 2007 or 2010 is installed?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Spell check does not.

  The spell check on Window Vista simply stopped working.  Whenever I click on "tools can spell check, the box comes in asking me if I want to check from the beginning.  If I click Yes, it then says that he finds no error and the window disappears.  I did a scan of the systems, but that has not changed anything.  In addition, the automatic spelling checker does not either.  Nothing is automatically highlighted when misspelled.  Help!  I need this function.

  The spell check on Window Vista simply stopped working.  Whenever I click on "tools can spell check, the box comes in asking me if I want to check from the beginning.  If I click Yes, it then says that he finds no error and the window disappears.  I did a scan of the systems, but that has not changed anything.  In addition, the automatic spelling checker does not either.  Nothing is automatically highlighted when misspelled.  Help!  I need this function.

  I think you were on the wrong window. Have you clicked on create a message first, and then the tools?

  Open Windows Mail > (do not click on create a message) >, menu bar tools > Options > spelling. Put a check mark on "Always check spelling before sending" > OK

  t-4-2

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Automatically Reload external files modified does not

  When I modify an external file (eg with Notepad ++), the function automatically Reload external files modified does not work.  This is regardless of whether or not the boxes automatically Reload external files changed or silently reload when file is not modified are checked in the preferences of the environment.

  Oracle SQL Developer 4.0.2.15, 15.21, x 64 build

  Java Platform 1.7.0_55

  Windows 7 Professional 64 bit

  I noticed other forum threads has this connection, but they have all been archived:

  https://community.Oracle.com/message/1244946#1244946

  Bug 9.0.3.3: no editor refreshment for files modified externally

  The current solution - use SQL Developer 3.2.20.09 instead.

  The links that reference you are dated, and one (in fact for JDeveloper) predates the existence of SQL Developer.  Auto-recharge works fine for me, both for Notepad and Notepad ++.  Given that it also works for you with the 3.2.2 version, I can't that assume your user for 4.0.2 settings got corrupted somehow.  If you have migrated the 3.2.20.09.87 or any other rejection of some, I recommend...

  1. exit SQL Developer

  2. delete or rename %APPDATA%\SQL Developer\system4.0.2.15.21

  3. remember that Windows by default, considers the part folder AppData C:\Users\\AppData to be hidden.

  4. start SQL Developer and jump in front of all the guests on the migration of user settings.

  Hope this helps,

  Gary

  SQL development team

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk