system hang

Similar Questions

• System hangs if Linux tries to activate the PCMCIA device

  Hello
  I have a Toshiba Satellite M30X-118 with dual boot Windows XP and linux Suse 6.3 System pro. The problem is with the on board, pcmcia device during installation and start-up when linux tries to activate the pcmcia device, the system hangs... Please if anyone has the same problem and found a solution please share it with me

  Thank you

  Hello

  I'm not a great teacher of Linux, but I found some good sites on this topic.
  Please visit these sites:

  http://pcmcia-cs.sourceforge.NET/man/PCMCIA.5.html

  http://www.buzzard.me.UK/Toshiba/index.html

  http://newsletter.toshiba-tro.de/main/index.html

  Best regards

  Good bye

• System hangs after installing UPDATE for Windows XP (KB955759)

  Update for Windows XP (KB955759) installed on my system without problems. Once the system reboots and the Office rises, the system hangs.

  Are there any known issues or fixes for this?

  The system is XP Pro SP3

  Thank you!

  Run the 'unsubscribe' Fix It (left hand) on this page and you do not need KB955759: http://support.microsoft.com/kb/954157

• Original title: System hangs when you open Add/Remove programs

  Original title: System hangs

  Windows XP crashes each time I have open the control panel and try to view add or remove programs (it also crashes in safe mode). He locks also after has been idle for a few minutes. I tried selective startup mode and the shutdowns continue to be committed. All the screensavers and standby/hibernation modes are turned off. I ran the diagnostics and only met with a 2000-0146 error code. Any other ideas out there?

  I was finally able to save all my data and was able to reformat my existing hard drive. I also reinstalled XP SP3. I finally got all the drivers reloaded and have reinstalled virus protection. So far, everything seems to be back to the standard...

• When you've been a long game my system hang and see a blue screen?

  When you've been a long game my system hang and see a blue screen?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Hope this helps, Gerry Cornell

• System hangs for a minute when sending emails in Windows Mail.

  Original title: Windows Mail problem.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • When I try and create e-mail or reply to a message, the system hangs for a minute before moving forward
  • Error messages - if you try and press the button create again, he says not responding do not
  • Recent changes made to your computer - no recent changes
  • What you have already tried to fix the problem - nothing
  Ensure that Avast is not set to analyze them.  That happens for every email or only the first message that you create?  Responses take longer?  You have a large list of contacts or a large number of fonts installed?  Both of these can slow down WinMail.
   
  In addition, after the removal of Norton, you must set the mail settings for the account, so its best to remove the e-mail account, close and reopen WinMail, and then add it again.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I got rid of Norton and actually put on Avast anti virus lately. As I said when I hit Create Mail I get a message saying "windows mail does not" and then after about 45 seconds it comes up and I can send emails. I used this Windows Mail utility (www.oehelp.com/WMUtil/) to compact and repair the database and it has not changed much.

  Johnny

   

• Description of the problem: my system hangs on BCCode 50 message

  original title: Description of the problem: my system hangs on the following message:

  Description of the problem: my system hangs on the following message:

  Product
  Windows

  Problem
  Stop unexpectedly

  Date
  14/03/2011 10:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini031411 - 01.dmp
  SysData. XML
  Version.txt

  Additional information about the problem
  BCCode: 50
  BCP1: B0DB1E82
  BCP2: 00000001
  BCP3: 0200007F
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Information about the server: d9f00af1-a541-4e60-af92-c7939b69fe03

  y at - there an update I can install to stop this thype of the problem

  L van BUREN
  Operating system: Windows Vista

  I returned to the load of the system factory and I still get this problem. Since charge files of vista it happened about 6 times in the last two weeks — three of them arrived the same day.

  I use a heward packard pavilion 4600-2 GB - 3

  Hi Lawrence001,

  ·         Did you change your computer recently before this problem?

  ·         Are you able to boot to the desktop?

  I suggest you to follow the steps described in the article provided below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• System hangs after installation of security.

  My Dell computer freezes.
  After the installation of Verizon's Internet security suite.
  I restarted and was ased by adobe acorbat to install a undate immediately.
  I did and rebooted again.
  Now when my office is ready, if I hit any key, the system hangs.
  Can I restore back a few days in "safe mode" may solve my problem?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• Possible problem HARD drive - by clicking on the sound and the system hangs on Qosmio G30 - 116

  Hello

  I just got my G30-116 return of service (replacement of the screen) and after 2 days another problem. He just continues to hang out.

  I do not change a thing since I got it and now it just stop working on things sometimes like browsing the internet. It has not happened before. And my biggest concern is the trigger that made my hard drive.

  What can be wrong? It not crash until I have it sent to the service, I think that my hard drive is defective... Thank you

  What to say? If you can not find out why freeze the problem occurs, try to preinstall the operating system with recovery DVDs delivered.

  In any case, from your description, I'm afraid there is a serious problem with HARD drive and it can be simply worse then now. Please be sure that your data is backed up.

  Please contact service again and explain the situation. If the HARD drive is faulty, you will get a new, and if they have the HARD drive on stock, it can be replaced very quickly. G30 is lovely and I hope that you will be satisfied. A few days ago my friend visited me and we have tested his G30 with HD-DVD player on my LCD TV. I can tell you one thing: I am really impressed with the HD picture quality.

  Good luck!

• Windows 7 update causes system hang

  Hi every1

  I use 7 premium.my house system gets hanged almost whenever I restart after an update of the window or a software update. Help, please...

  * original title - windows hang problem.*

  You have external devices such as an external hard drive on? Are you shut down Windows with open applications?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  --------------------------------------------------------------------------
  Click Start > type in the search box > display the event log > click on the result and to identify any error and criticism during the time that you are having crashes on your machine.

  If you can post back with events, we can narrow down the cause of the problem.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 - system hangs on install updates 1 of 2

  Windows 7 hangs on the first when told to close on the first configuration of the user. The installation program will suffer if I turn off manually?

  * original title - please do not power off or unplug your machine. Installing Update 1 of 2... in movement. Hard drive light does not *.

  No, it should not be, Windows 7 uses a file system that is logged, so recovery should not be a problem, the system will pick up where it left off.

  I recommend do you a manual download and install updates that have been incriminated by go http://www.microsoft.com/downloads.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• System hangs when you work on Foxprox 2.6 for DOS

  hanging system

  I work in foxprox 2.6 for dos. My foxprox program hangs when system os on snare for one or two seconds how can solve this problem. the system is active and only the program hangs.

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the MSDN forums. Please ask your question in the following forum.

  Visual FoxPro general forum

• system hang and hear no sound after Service pak2 charged.

  Event ID = 10005. Vista operating system repeatedly freezes at startup. Runs in safe mode. Uninstalled audio in Device Manager. start in normal mode and system works fine with a red x in the speaker (audio system does not). As the system loads and installs the drivers (Creative X - FI audio Processor (WDM) system crashes.) Have to hard every time start starting System. Event log recorded. Have messages such as Dcom got error 1084 to run {9e175b6d-f52a-11d8b9a5-505054503030}. Another event ID = 7026, start the following - system or boot-start drivers failed to load: mpfilter, spldr, wanarpv6.
  In September, I did a system restore with the operating system disc, but he continues to hang out with the same error messages. I contacted Gateway technical support and paid $199. for services and they could not identify the problem. You run microsoft fix - it and he tells me "system cannot play audio because the windows audio service is not enabled. Family using windows vista premium with Service Pack 2 installed. Sound Blaster X - FI PCI Card. All solutions is welcome.

  Hello frustrated1since080810,

  In addition to reply Manasa P, please pass the status after you run the Fix It tool in the link below and also listed in the answer above:

  How to solve problems that you experience after you install a Service Pack for Windows Vista?
  http://support.Microsoft.com/kb/948481

  Please also relay the exact brand and model of your PC and the sound card.

  You can also try to install the driver of sound card directly from the manufacturer of the sound card to the sound card and then check the question:

  http://us.store.creative.com/

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why is my system hangs for 20 minutes?

  Explore files, IExplorer9, tasks etc. hang with "not responding". When I click or right-click on the icon trash it crashes. Vista Ultimate SP2 observer of events shows many more crashes...

  Event 10010, the Service Control Manager event log provider
  A timeout (30000 milliseconds) was reached while you wait for a response from the service event log transaction.

  Event 10010, DistributedCOM
  The server {7F6316B4-4D69-4765-B0A3-B2598F2FA80A} is not registered with DCOM within the required time.

  Event 8210, System Restore
  Scheduled restore point could not be created.  Additional information: (0 x 81000101).

  Event 8193, System Restore
  Unable to create on the volume restore point (process = C:\Windows\system32\rundll32.exe/d: c:\windows\system32\srrstr.dll, ExecuteScheduledSPPCreation;)

  Descripton = regular control; HR = 0 x 81000101).

  Event 1002, Application Hang
  SystemPropertiesAdvanced.exe version 6.0.6000.16386 program ceased to interact with Windows and was closed. To see if

  more information about the problem is available, check the history of the problem in the reports on the problems and Solutions control panel.

  Process ID: 146c Start Time: time of termination 01cc011d94ceb342: 0

  Event 3002, MicroSoft antimalware
  Feature of Microsoft Antimalware Real - Time Protection has encountered an error and has failed.
  Feature: Access
  Error code: 0x80004005
  Error description: unspecified error
  Reason: The pilot filter skipped scanning points and is in through mode. It is maybe because of the conditions of low resources.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/