System Image recovery, restore the system from an image will include my program inside?

Similar Questions

• Recovery of the factory from 32 bit to 64 bit with the note system performance

  Recovery of the factory from 32 bit to 64 bit with the note forever system performance, it's about associated wire
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50433
  which is closed/locked, and had no correct answer.

  I just bought a Toshiba L750. After learning of the default Windows 7 installed is Windows 32 bit, I decided to go Recovery Wizard from Toshiba upgrade to 64 - bit. However, the process is stuck to the system performance of note, that repeated several times for 2 hours.

  Given that I guessed that screen performance of system just note one full screen of a normal process of Windows, so I pressed the button Windows start to display the taskbar which showed a component of Adobe installation process has failed. In any case, I clicked on the install Adobe on the taskbar button and close the window.

  The note system performance then continued with about 10 steps ahead after 15 minutes. All well done.

  So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  A suggestion from bits to the team of Toshiba laptop:
  The full screen of the Recovery Wizard is good to hide technical details from users. However, if hang in some components, like the Adobe component I've seen, this will be confusing and advises current defects if the end-user following some in the thread above, legacy because of some missing components and the wrong configuration. It is preferable that the wizard of recovery to exit full screen at a given time, or the wizard handles error scenarios better.

  > So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  Thanks for sharing this with us!

• System Restore (with backup) for Windows XP how to restore the files from here?

  I saw the other posts for this but they have not answered the question. When I look in the C drive, and open the folder backup (backup C:\My--01/12/23 1134 AM), my photos, videos and documents are not available or are invisisble. When I tried to make hidden files visible, all my desktop icons and all the Start Menu program buttons disappear. I can see the files when I search with a software such as jdiskreport - 1.4.0, but I'm unable to move with this program. When I tried to move them with jdisk... they is locked in the tree of files of jdiskreport. Whenever these trees of missing or file icons has locked, I had to restore to the good previous restore point. In my view, the full restoration of the system (with backup) fails and should be avoided at all costs.

  So, if someone knows a way to access these files, I would appreciate the help of course. And please, no answers don't like "cannot not you just copy and paste?" because it is not currently a solution until the files are visible without erasing my desktop and the Start Menu.

  Hello

  Select the advanced restore options to restore the files. See the steps in the following article.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/restore_overview.mspx?mfr=true

• System restore failed during restore the registry from the restore point. An unspecified error occurred during the restoration of the system (0x800703f9)

  Well, all I can say is I tried to use the tool of restoration but always have the same answer, cannot perform the task. I wonder what to do because I opened the registry editor to see if something I did that intrigues, restoring the system but found nothing. While it would be!  Thank youvery much!

  Hello!

  You have published in the Forum in Portuguese. Take your questions on the specific Forum in your language.

  Even more.

  Elton Reis

• Restore the partition from the Satellite Pro A200 recovery

  Hello

  I accidentally deleted the 5 GB recovery partition on my Satellite Pro A200. I have since recovered (and the data inside) and tried to create my discs of recovery using the "Recovery Disc Creator', but it is to say that it cannot find the recovery partition :(

  I tried fishing by the ini files for recovery disc creator find where he seeks the score, but could not find anything...

  One thing I noticed is that now it is recovered, it appears as a NTFS fs (I think that before it was an unknown FS type?) and volume label "HDDRECOVERY".

  Any ideas on how I can either:

  (a) wrong recovery tool by using the recovery partition
  (b) to make the score look exactly as it did before I deleted it, so I can use the tool as it is.

  Would really appreciate any help - want to make these recovery disc for my vista ultimate before I go around whacking backtrack top :) and dicking

  your

  Frank

  Hello

  > accidentally deleted the recovery partition of 5 GB on my Satellite Pro A200. Since I got (and the data inside)
  I wonder how you restored the deleted partition. Perhaps the recovery settings partition are not the same that before and, therefore, the "Recovery Disc Creator' doesn t work properly.

  Unfortunately, I think you will not be able to fool the recovery tool, if the recovery partition cannot be found.
  You can rename only the partition NTFS FS. This can be done in the disk management console.
  But I don t think this will solve this problem.

  It seems that you have to reinstall the whole OS using the CD of restoration of Toshiba or the original CD of Microsoft Vista

  Good bye

• Pavillion6360uk: Restore the files from the dvd

  Last night my PC could not initialize so I did a system restore, but before that he asked me to back up my files on DVD... so I backed up my files to DVD 9. The PC is a complete system restore, but when I go to backup and restore there is no option for me to restore my files from the DVD, I burned, it only shows my router and my pc, but it will not show my dvd drive. I restore from the bad program / location?

  Your help will be greatly received as all my stuff working in daye is on these dics that I hope!

  Its OK he sussed by running the recovery as an administrator manager who runs the file restore program in the Recovery Manager.

• New iPad: restore the data from the old iPad, but...

  I got a new iPad. I have already backed up my old iPad to iTunes and wanted to put in place the new iPad to restore this backup data. BUT when I connected to iTunes, I've learned that I have to update the operating system first. He wouldn't let me NOT restore from backup! I had to set up as a new iPad.

  So, I did the installation of the new operating system. But I have a lot of applications and data from the old iPad I want on the new iPad. How can I quickly transfer these data? I have found no method to restore the backup of the old iPad now since. Frustrated!

  Follow the directions here: https://support.apple.com/en-us/HT203434

  Basically, now that iOS is updated you need to clear the iPad and then you can restore from a backup. -AJ

• Restore the registry from the host.

  Hello

  Recently, I had a new hard drive installed in my Tower for my counter top.  I like to play POGO games and was not able to load some games.  When I called POGO they told me that my 'winregistry home' had disappeared and I needed this registry to load games.  They also said that they could solve the problem for $99.00.  I ask if there is another way to save me this kind of spending, and always to restore the registry.

  Because I know very little about all this, I don't want to get ripped off and to find more late that could have been done online for free.  Can someone at Microsoft explain that and then maybe help me with this problem.  Thank you very much.

  Chief John

  e-mail: * address email is removed from the privacy *

  Hello

  What version of Windows are you using?

  They were talking about the Host file?

  Never touch the file and the fact that he disappeared may be an indication of a virus or malware.  Restart and start typing the F8 key to display the logo of the manufacturer.

  Select Mode safe mode with networking

  Download the following tool and run a scan complete

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  When finished, restart the computer

  Open the Windows program Notepad and find the following information:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line. In addition, there must be at least one space between "127.0.0.1" and "localhost". The second line is an IPv6 address mapping to localhost, and this line is part of the default for Windows Vista and Windows 7 hosts file. There must be at least one space between ": 1" and "localhost".

  In Windows 2000 or XP, all you have to do to save this file "hosts" and you're done. In Windows Vista or 7, you have launched the program Notepad "as Administrator". This will allow you to record in the "hosts" file and the path when you try to save is a file system type.

  # Copyright (c) 1993-2009 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  resolution of name localhost # is handled within DNS itself.
  # 127.0.0.1 localhost
  #: 1 localhost

  Do not add the # in front of the last two items

  Name the file Hosts

  It goes in C:\windows\system32\drivers\etc

• Restore the catalog from the NAS - PSE 13

  All media (pictures, videos) stored on an external NAS, an extensive catalog was stored on my HARD drive and saved on the NAS server.

  When my hard drive crashed, I tried to restore the catalog, but he could not 'connect' to existing media still on the NAS, but instead I had to restore all media on a differrent drive.

  I'm looking for is the ability to simply restore the "database" and connect it to the existing media.

  Is there such a possibility in PSE 13?

  Also, I would be grateful for an explanation of the different files PES creates in a catalog. The files contain the actual "database"? Can these files be saved directly without using the "catalogue of back-up" - command to post-secondary studies?

  Thank you for your help,

  Mark Bachner

  mark_bachner wrote:

  All media (pictures, videos) stored on an external NAS, an extensive catalog was stored on my HARD drive and saved on the NAS server.

  When my hard drive crashed, I tried to restore the catalog, but he could not 'connect' to existing media still on the NAS, but instead I had to restore all media on a differrent drive.

  Yes, it's how a backup of the Organizer. You cannot use the backup yourself, it is not a simple "copy" of your photo files folder field of the plantation. It is a resource for the process of restoration of the catalog. You cannot 'connect' in the backup folder. But the huge advantage is that you can restore your catalog (database and other resources) so your image files.

  I'm looking for is the ability to simply restore the "database" and connect it to the existing media.

  Is there such a possibility in PSE 13?

  Also, I would be grateful for an explanation of the different files PES creates in a catalog. The files contain the actual "database"? Can these files be saved directly without using the "catalogue of back-up" - command to post-secondary studies?

  No problem.

  The catalog itself is not a file, it is a complete folder containing your database: a file named ' catalog.pse13db, which is a database sqlite; more than many other files and subfolders.

  Looking for the location of the catalog in the menu help/information system of the Organizer. You may need to do a search with Windows Explorer for file catalog.pse13db.

  It is simple to copy or move the catalog folder. Because its content is not changed when you move or copy, it is easy to "Save" and "restore" the catalog itself.

  The problem is that if the content of the catalog do not change the location of the file changes when you restore to a different location (disk or main folder). You must "reconnect" files, which is to change the location of each file that is saved in the database.

  Knowing the purpose of all the files and subfolders in the folder catalog probably will not help you. To 'reconnect', you will need to use sql queries to change the catalog.pse13db database.

  This is a discussion on a similar problem:

  Problems of trying to reconnect files in the Organizer PE10

• can application not available I restore the data from an encrypted backup?

  I had to get my iPhone repaired, so I did a full backup to iTunes and reset Once it was fixed, I have restored the backup, but a few apps "could not be restored. In the case of the one that interests me, the app no longer seems to exist on the App Store - I found a link for it from a review of old, but the link is dead: the app no longer exists. Since it is an application that stores data on the heights of our children, and I had used it for a few years, I would like to be able to recover at least the RAW files of my support, even if the app no longer exists. It is not a large amount of data. The backup is encrypted, so none of the files have names that are meaningful, it is impossible to guess what file is associated with that particular application. Any suggestions?

  If you have the app in the iTunes library on your computer you can restore it from there.

• Restore the Contacts from Iphone restore

  I'm very frustrated by that.  I had to do a total restore my Iphone 5 as a result of an error in the former area software and storage being gone.  I backup of the phone before doing this, but that the backup is worth nothing because to restore the previous backup would return to restore the bug in the software again.  So I basically had to a do a new restoration of the phone and gradually bring only my necessary stuff on the phone.  I can't seem to get the contacts and calendar, that I had to come back and I see on Itunes there is a place to synchronize those.  Still when I sync them they are not restored.  My contacts have some inside information, but lack of contacts.  Those who are there are missing phone # s and addresses e-mail.   I can see the calendar and contacts that they were originally on my Ipad so I know that they are at least there.  Are not the contacts and calendars supposed to migrate in Icloud and update all my Apple devices (I have a Mac Pro too) so that they are compatible?  If there are some parameters jiving not somewhere I'm lost as to what to do and what devices for all works in harmony.

  My plan is to do a backup of my phone after I put everything so that I have a clean backup, that is not a bug in there and has all the correct information.

  Hello heffmonster,

  Thanks for this info and choosing the communities Support from Apple. I know how important getting your contacts on your iPhone is to you! From what you said, it seems you maybe problems with having the correct accounts added to your iPhone after you restored, since you mentioned that the lack of contacts are on your iPad. You asked if iCloud syncs contacts, and he does, but only those in iCloud. iCloud will not synchronize contacts that are related to other accounts, such as Gmail, Yahoo, Hotmail, etc. I check what are the accounts on your iPad and make sure your iPhone has the same ones added correctly. This article can help explain more about the use of Contacts on your iPhone:

  Add contacts - iPhone help

  See you soon!

• Restore the folder from Time Machine backup external hard drive

  Hello world

  I have a folder of music that is 600Go and has been saved on Time Machine my previous internal hard drive in the iMac.

  Ive since upgraded to SSD and do not want to want to restore this music folder on my new SSD due to its massive size.

  Is there anyway I can restore the folder music of time machine on an external hard drive?

  This way I can still recover my music collection but away from the internal SSD.

  Any info and advice would be great.

  Open Time Machine

  Navigate the backups to find the music folder

  Click on the music folder to highlight

  Click on the gear at the top of the window icon

  Click on "restore to".

  In the next window that appears, locate the hard drive

  Click on the hard drive to highlight

  Click on choose

• Restore the backup from the clouds

  Salvation;

  I'm using MS cloud for backup of my laptop with Windows 7.

  I had a crash of HW so I had to restore the laptop with the original SW containing no cloud backup.

  How can I ge the hand on my backup data in the cloud of MS and download it?

  [moved German forums]

  Hello Lervik,

  Thanks for posting your question on the Microsoft community.

  I need additional information about the problem so that we can help you better.

  1. is your computer connected to a domain network?
  2 are you referring to Microsoft Azure or OneDrive when you say "MS cloud"?

  Thank you for details on the issue.

  I suggest to check the following items and check.
  Reference:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  https://azure.Microsoft.com/en-us/services/backup/

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Need to restore the tile from photo library

  I accidentally hid the tile of photos under the Photo app library. Anyone know how I can restore it?

  Thank you for this answer,

  I have the Photo app. It's just that after clicking on the application there are 5 folders:

  My photos

  Photos from SkyDrive

  Photos from Facebook

  flicker photos

  Devices of

  They each have a "Hide" link in the upper right corner, I accidentally clicked on that and the disappeared from my pictures folder.

  I guess there must be on my computer somewhere, I clicked on 'Hide' not 'uninstall '. I don't know where to look to find it.

  Thank you

  Click settings (take the mouse cursor to the extreme right) > Options > Locate "display photos and videos of" check the box against those that are hidden.

• How do I restore the backup from iPad Mini if the button "restore backup...". "is grayed out?

  Hello

  Yesterday, I tried to downgrade my iPad Mini 2 (128 GB) of 9.3 to 9.2 of iOS in DFU mode. Before that, I backed up my iPad in iTunes. After decommissioning, apparently all of my 3rd party apps have been wiped out, and that left me with a huge 'other' part of the use of the iPad. So I decided to reset the iPad and erase everything. I noticed that after the reset, the iOS returned to 9.2.1.

  When I plugged the iPad to my computer later, and tried to restore the backup, I got the message "the backup cannot be restored for iPad because the software is too old". In addition, in the iTunes iPad summary page, the button "restore backup... "is grayed out.

  I guess it's because I backed up my iPad to iOS 9.3, and now it's 9.2.1. But y at - it another way to restore backup of iTunes? Or do I have to update to 9.3 first? iOS 9.3 is currently unavailable (last week it was, however).

  Thank you!

  You cannot restore a more recent iOS backup on a device that has an older iOS. You have saved when running iOS 9.3 and your device is now in 9.2.1. You must update the device until backup, you can ise. Unfortunately, as you know, the update is no longer available. Apple shoot because there were significant problems.

  Read more here.

  For those having issues with the iOS 9.3 update please read...