system IO 2048 error message

Similar Questions

• Recently had a phone call from a person identified as a Microsoft employee and she warned me that my system was sending error messages

  Original title: scam?

  Recently had a phone call from an origin of the State of New York - the person identified as a Microsoft employee, and she warned me that my system was constantly sending through Microsoft error messages - asked me to press on "Control - Windows - R ' and other tasks... natch - I refused.

  Anyone know of this type of scam?

  What is and what is final potential?

  Fake phone calls to technical support

  Such unsolicited telephone calls are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft does ever not requested for telephone calls of support or security.

  (such persons may use names other than Microsoft as well)

• In e-mails AOL, verification of the individual messages in the results of regular system in this error message: there was an error while loading the message. Please try again later.

  In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »

  This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.

  On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.

  Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.

  You can do a check of malware with several digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• Receive vc system tray restart error message. How can I stop this on my laptop?

  Hello

  Get VCSystem plateau is restarting error message. How can I stop this on my laptop? My laptop model number is

  VPCEB4AFX.

  Hi nagk98,

  I'm sorry to hear that you are having problems with your laptop. The plateau of VCSystem is a process used by the VAIO Care program. To solve this problem is that you need to upgrade your VAIO Care program. You can uninstall and re install the program if VAIO update fails. You can check this link for more information on the VAIO update utility. I hope this helps.

  Thank you!

  Sean

  If my post answered your question, please mark it as "accept as a Solution.

• Configuration of the system "access denied" Error Message When change of selective startup to Normal startup

  I tried to get my XP to start without using the XP CD. I changed my system Config of selective startup to Normal startup, but I get the following message:

  "ACCESS DENIED ERROR WAS RETURNED WHILE ATTEMPTING TO CHANGE A SERVICE. YOU MAY NEED TO LOG ON USING AN ADMINISTRATOR ACCOUNT TO MAKE THE SPECIFIED CHANGES. »

  How, where and what is my administrator account. I'm the only one using this pc. What is my normal name & passowrd normal or what?

  Thank you

  Thomas

  Thomas,

  Follow the step on the next page to start the computer in Mode safe.
  Start the computer in Mode safe
  Once you start the computer Safe Mode, the built-in "Administrator" account should appear. I'm not saying that your user account is not an administrator account, but just to be sure to use the one built for all purposes it may serve you.
  
  See you soon ~!

• operating system not supported error message

  I try to install InCopy on a XP machine service pace 3 with 2.34 GB of RAM... I get a message that the operating system is no longer supported and the installation does not start.  What gives?  The machine seems to meet the specifications of Adobes for installation.

  Trying to install CC... called customer service... they said inCopy will not install on XP, so I spent the last 5 hours to do a clean install of Windows 7 (64-bit) and I should be good to go now...

  Thanks Jeff...

• Operating system facing the error message - pirated copy of Windows 7

  LAP TOP is CRUSHED HAD FIXED no has not GIVE BACK STARTUP DISK AND NOW SE SAY of READING WINDOWS 7 IS PIRATES COPY HOW can I FIX LAP TOP ORIGANALLY HAD VISTA INSTALLED AND I HAVE THE PRODUCT KEY WHAT DO I DO?

  You can download a copy of Windows Vista from the following link and use the product key located on the COA sticker attached to the bottom of your laptop:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  Note: You can use the HP format tool to format your USB (run as administrator) after the windows install so you can use it as a USB again. ;)

• Photosmart C7280 All in One Printer, Error Message - ink system failure

  Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

  The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

  Thank you, Cynthia

  This might help you:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• Whenever I have connect my system, the error message 'C:\Users\Dell\AppData\Roaming\mapnc.dll' does not exist.

  Whenever I have connect my system, the error message appears which displays

  "There was a problem starting, the specified module could not be found."

  and sometimes,.

  "C:\Users\Dell\AppData\Roaming\mapnc.dll" is not exist.

  How can I solve this problem? Please help me. The information system is given below,

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Manufacturer of operating system Microsoft Corporation
  System model Inspiron N5010
  System Type X 86-based PC
  Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz, 2528 Mhz, 2 Lossnay, 4 logical processors
  A09 BIOS Version/Date Dell Inc., 19/10/2010
  SMBIOS Version 2.6
  Physical memory (RAM) installed 4.00 GB
  1.86 GB available physical memory
  5.85 GB total virtual memory
  4.47 GB available virtual memory
  2.93 GB page file space
  Paging file C:\pagefile.sys

  Avira Antivirus Premium is also installed on the system. The error message from the last weak. However, the system had no no ill effect after that.

  Hello

  Thank you for writing to Microsoft Communities.

  1. have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.

  Method 1: Try to start the system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  Please follow these recommended steps and post if you still experience the problem.

• Fake print error message want 4502

  I Wibdows 8.1 with a new installoed want 4502 all-in-in-one. It will print perfectly, then the operating system sends an error message that the casting of the page is not printed. I say I'm getting low on black ink supply, but it seems to have been a lot.  The text of the message is about "error in printing on printer Envy 4500 - could not print (document source, Windows, Outlook, etc.). It appears after the document is printed perfectly. Any ideas?

  Been there, done that; without success. The message is caused by a low level of black ink. I changed the cartrage and the messqage went. Thank you once again for a flaky OS Microsoft and I thank you for your help.

• Can't make a genius bar reservation system guard indicating error when booking

  Hi ' I tried to book a session at the genius of Apple Sydney bar for spending a few hours, each time I try online booking, I get an error message when I press the book"" button. Is there a problem with the booking system?

  Error message is

  0f1752a6-7093-4620-9F8D-19c4bd4736d1

• error messages bad image

  Have an older Dell Dimension E510 under XP SP3.  At the start we get successive 'BAD IMAGE' error merssages.  For example, one is for "Services.exe - bad Image".  We click on OK, and a few seconds later, another Bad Image error message appears.  At the time of starting ends, we counted 28 messages of bad Image, each of which we 'OK' to continue with start.

  Then more bad Image error messages appear that we receive by e-mail, using IE, etc.

  Just started a week before, but seems to be here to stay.  I think I need to reload the OS, but thought I'd get other opinions first.

  Thank you

  Mike T GOES.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/bad-image-error-message/c7d04810-3661-4668-8769-7392729ff913

  There is some good advice from JoseIbarra in this thread. Follow it and post back with your results.

  On another note, since you had problems before (ie: your last thread) resettlement may be the answer, as when you format it will wipe everything for a fresh start.

  But maybe if the above link is for you, you can save yourself the time of relocation.

• can not backup files to restore the system to receive error code 0 x 80070005

  Original title: can not save the files in system restore

  > error message... a shadow copy could not be created (0x80070005).

  Hello

  Disable the security software and activation of Volume Shadow Copy and backup service can help in performing a backup.

  Check the steps suggested by Sandeep GNT from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Vista-Home-backup-0x80070005/4558119a-73d6-4C18-9a95-8ae484678586

  Good day!

  Answer please if you face concerns.

• Presario continually offers the error message 'space' insufficient on drive D: (CD-ROM). How to fix?

  During my first backup via Presario backup on the CD-ROM drive (D), I ran out of discs and decided not to continue. But the Presario guard operating system throw up error messages drive D is "saturated". The drive is empty since the abandonment of the backup two weeks ago. How can I tell Presario to cancel the backup, or whatever it takes to stop the error message?

  I'm sorry I don't exactly understand the problem you are having... can u please develop once more?