System makes the rattling while you type

Similar Questions

• How to determine which hard drive makes the rattling?

  Sometimes I hear the hard drive makes clicking, get 4 hard drives and would like to know how to determine who makes clicking sounds.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Sunday, September 16, 2012 12:58:32 + 0000, oem7110 wrote:

  Sometimes I hear the hard drive makes the rattling

  Almost certainly an indication that a disc is a failure and should be
  replaced as soon as POSSIBLE.

  I get 4 hard drives and would like to know how to determine who makes clicking sounds.

  Does anyone have any suggestions?

  1. open the case and disconnect the power cables of all readers but
  C:, then run the computer for awhile. If we click, it is C: this is
  dying.

  2. then plug the power cable into a different drive and run it
  computer for a while. If you click on, it's that you reconnected
  who is dying.

  3, number 2 twice more if necessary to repeat.

  Ken Blake, Microsoft MVP

• Why you put "Open a new tab" on the right side of the browser, when you close a tab on the left and you type a new URL in the browser on the left?

  I changed my computer from XP to Windows 7 and migrated my FF browsers. But... now the tabs at the top of the page are all right (they were upper-front left - where I loved her)

  The most important is the "open a new tab" + - is on the right. But that is not sensible. Why you put "Open a new tab" on the extreme right of the browser, when you close a tab on the left and you type a new URL in the browser on the left?

  How can I put my "open a new tab" immediately to the right of 'Close tab' - as if it was before?

  Please advise?

  Try clicking on "Restore default settings" in the palette to customize to reset the toolbar customization.

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize
  • https://support.Mozilla.org/KB/customize-Firefox-controls-buttons-and-toolbars

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

• How can I disable the voice when you type with iOS 10.0.1

  How can I disable the voice when you type using iOS 10.0.1?

  GO to settings - general - accessibility-speech - Feedback-turnoff typo Word...

• I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  find it hard to imagine that Apple could sell these defective products.

  If the seller is an authorized Apple reseller, an independent company,

  You may need to ask you if you could see & try a different product sample

  because you might be looking at something that has a defect.

  {According to the related help page, Type position should be more

  stable to use. However if the keyboard is not flat, this sounds like default.}

  Sounds as if you're not at the official Apple Store (apple retailer)

  but, on the contrary, are somewhere else. Could you give more information?

  Some keyboard accessories are made by third party companies; so

  If the product has an Apple product model number, we note here.

  When considering the purchase of an accessory, it's a good idea to test

  and check in the store before you buy. An official Apple Store has

  a different return policy as an independent reseller of Apple.

  Don't know if I can be useful; These chat rooms are usually Apple

  users of products such as yourself, who have taken their unpaid time

  to see if they can help the other users of the product.

  Good luck...!

• How can I do to make the taskbar allows you to hide every time I have remove the slider from?

  2 questions: How can I do to make the taskbar allows you to hide every time I have remove the slider from?  This rarely works.  Question 2: name of the task SystemSoundsService is called by the Microsoft PlaySoundService class action.  What is his function, and above all, what is the best place for these tasks apparently running in the background all the time?  Is it good to put an end to this task?

  Hello

  Check the scheduled task SystemSoundsService here.

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/kb/939039/en-us

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problems with the cursor when you type

  I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!

  I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?

  Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:

  Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
  Click the Pointer Options tab, and then do one of the following:
  Uncheck the Hide pointer while typing Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use win 7 and the cursor jumps all over the page when you type

  When you type using windows 7 I find that the cursor jumps around

  It also also increases that you typed!

  Would appreciate, if possible, a simple fix step by step if there is a.

  Juice now this msg has lost about 2 sentences? and I don't know where they are! ??

  Hello

  Laptop?

  Check with the manufacturer of system support, documentation in line, or forums as there
  probably are shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with)
  Entries of TouchPad) and some have a utility that loads in the Notification area near clock on
  at the bottom right. There "may" be the sensitivity settings.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work) try to update
  the driver for the TouchPad.

  Panel of configuration-Device Manager - mice and pointing devices - Double click on touch pad
  -Pilot Tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear
  the device if it is present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  =================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cursor jumps to another part of the page or the screen when you type

  Hello

  When you type on the keyboard of my laptop cursor will go to a random part of the page or the screen and keep tapping on what I already typed.

  I had this problem with a Dell Inspiron, and they provided a patch with has been for the Bios or the touchpad.

  Is this a common fault with the Toshiba. I've seen some messages referring to disable the touchpad. However I don't think that this is a solution to the problem and Toshiba should provide a fix.

  Does not at any time have my finger on the touchpad while I was seized.

  Hope that answers.

  Huw.

  Hello

  As Christopher said use FN + F9 key combination to disable the touchpad. If the problem persists you should contact the Service partner. I'm sure they have more experience with it.

  I use two models of laptops different and same happen to me. Not often, but sometimes.

• How to disable the ToolTips while you item Hover mouse over a taskbar...

  OK this question is clearly asking how to disable or delete ToolTips and not the ones int the browser but other places like the taskbar, for example. you hover over low start and it says start or a brooch exe scrap cuts and it displays the names for the date and time of it... over and it shows time and date which is really annoying... Why piont on evidence... ToolTips... anyone gets you t use any OS would be irritated by ToolTips... Imagine that you will turn on your TV and it displays a ToolTip saying tv you watch news with it... then you go sitting on a couch, an another ToolTip pops up saying sofa sit it people... common ot... Please MAKE DISAPPEAR... not the tooltips of the Explorer, but any other ToolTips for example the ToolTips of the taskbar...

  Here an article with a procedure to disable ToolTips in Windows (not just the taskbar). http://www.windowsreference.com/windows-xp/how-to-enabledisable-tooltips-in-windows/.  It is a modification of the registry, so you must first create a point in http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ restoration system AND back up the registry http://www.adamsdvds.co.uk/tutorials/vista/regedit/backup.php.  I could find no way to hell for all the different programs and features individually using ToolTips - they do not seem to be controlled in this way, even in the registry.

  I don't know if this will also affect Internet Explorer (it might).  If so, I know no way to activate it just for IE.  If you prefer to have them everywhere (including taskbars) than losing them in IE (and), then repeat the procedure but use a value of 1 instead of 0 to restore tooltips - or just don't do it in the first place.  The decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the drive after you type the correct password for BitLocker. Access is denied.

  Hi all!

  I really have a problem with my disc drive BitLocker encrypted.

  On my PC at the beginning (from 2009), with OS win7, I encrypted my external WD 500 GB MY BOOK hard drive.

  Unfortunately, old PC died:(et il y a un problème.)

  Now on my new computer with win7 OS or another, I can't access my WD 500 GB MY BOOK external hard drive?

  my first try the solution: I try to unlock the drive with my correct password and everything seems OK, drive is unlocked, but when I try to enter the disk I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  After that, I try another option.

  try my second solution: In Control Panel > system and security > BitLocker Drive Encriptación I chose my encrypted disk and try to decrypt the drive. After maybe 7 hours and 99 percent, I got a pop-up message with the error. I don't remember now exactly how was the message.

  Now, when I log on windows, on another device (laptop) when I attach my WD 500 GB MY BOOKoutside, drive in my computer , I have the following status: my external WD MY BOOK 500 GBhard drive is unlocked, visible and recognized as a drive J:\, but I can't access it.

  When I try to enter again the drive, I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  Also, I have the correct password and BitLocker recovery key stored correctly the USB onmy.

  Help, please

  Best.
  

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Try changing the permissions on the drive for access.

  a. go to "Computer".

  b. right-click on drive J and choose Properties.

  c. click the 'Security' tab and see if your current user is displayed in the ' group or user names " list. If not, please click on the Add button, type the name of your current user account in the "enter the names of the objects to select " box, then click 'OK' to add this group.

  d. Select the user from the list, then check the box 'Allow' next of ' Full Control '.

  e. click on the Advanced button, and then click the 'Owner' tab. Then, press the button "Edit" .

  f. Select current user in the list and check the box "replace the owner of subcontainers and objects".

  g. click 'OK' to save the changes and wait for Windows to transfer ownership of all objects on the partition.

  h. click OK to save the changes and exit the Properties window.

  Check if you are able to access the drive.

  You can also check: BitLocker Drive Encryption Step Guide for Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• How can I stop my cursor jumping around while you type

  The cursor jumps around while I type.  Sometimes what I just typed disappears.

  I'll guess that you are using a laptop with a touchpad? If Yes, go to control panel and see if you can adjust the sensitivity of it, because chances are you're grazing while typing.

  I hope this helps.

• The website has encountered a problem and cannot display the page while you try to run Windows update and get error code 0 x 80240036

  I can't update, repeat me the website has encountered a problem and cannot display the page. I need to update to Windows XP Service Pack 3. The error code is 0 x 80240036

  Original title: does not refresh

  Hello

  1 did you changes to the computer before the show?

  2. who is the antivirus installed on the computer program?

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform the steps described in the article:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3:

  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/( )

  I hope this helps.

• Erratic behavior of the mouse when you type text

  I have a Microsoft Usb mouse and when you type text, it sends all of a sudden the arrow toward the corner top or bottom of the screen. It stops also do something and you have to click back in your text before you can continue to write

  Is the most recent current/software-drivers installed from microsoft, version 8.0

  In addition, install the latest drivers for the youre MB chipset, which gains its mfg website (intel, amd, etc.).

  which has drivers software USB for pc MB... Once everything is up to date, open the device mgr, expand

  the tree, R.click the mouse on it, properties, Advanced tab, reset the sampling frequency & the entry stamp

  length of higher following setting, it becomes best answer to the computer, close when thru.

• How to stop the rattling when I type, etc... (obviously I'm not much more than one expert)

  I am a senior and not an expert!

  How can I stop the rattling noise when I type th

  I am a senior and not an expert!

  How can I stop the rattling noise when I type th

  If it's a mechanical sound, it cannot be stopped.

  If it's electronic, it can be a (DIP) switch on the back of the keyboard.