System meets the specifications, cannot deal with AVCHD

Similar Questions

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Error MESSAGE: "Setup HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSADMIN "_".

  ERROR MESSAGE:

  "THE installation program HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. "LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSTEM ADMINISTRATOR.

  TRY SEVERAL DIFFERENT PROGRAMS TO INSTALL/DOWNLOAD AND KEEP THIS SIMILAR ERROR MESSAGE ABOVE!

  WHEN, IN FACT, I AM THE ADMINISTRATOR ON MY COMPUTER! HE DIDN'T THERE WAS NO OTHER USERS ON MY COMPUTER. WHY IS THAT IT IS SAYING THIS? VERY FRUSTRATING! THANKS FOR YOUR HELP IN ADVANCE!

  1. Open the prompt with administrator privileges by opening the Start Menu, type cmd in the search box, pressCtrl + Shift + Enter or click Start orb, all programs, Accessories, right-click on command prompt and selectrun as administrator.
  2. Type the following at the command prompt, and then press enter after:

     NET user administrator / Active: Yes

  3. Restart your computer and logon as an administrator.

• SE error message saying the printer cannot communicate with the computer cause of blocked files.

  Original title: DRIVER of PRINTER BLOCKED

  A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

  I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

  SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

  I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

  http://support.Microsoft.com/mats/printing_problems/

  If the problem is not resolved, contact Dell customer service.

• Recognizing the Intrusions and dealing with Registry Hacks

  Just installed a copy of Vista Ultimate 64 bit and got it upward and running without problem for a couple of days.  Today, the Internet stopped briefly and then minutes later he did again.  Suspecting an intrusion, I checked the relationship between downloaded to downloaded packages.  I looked at simply, does not download music, videos or something like that, and I had been on during a few hours.  Download Download the report is about 1 / 3 and I could see a lot of activity on the upstream with all browser windows closed and no open programs (other than background processes).  If it has been updated, I would see a lot more activity on the downstream!  So I shut down the system, disconnected my cable modem and waited to get a new IP address.  I don't think it is normal to see such a ratio and wait at least to a minimum, 01:10 regarding the packages downloaded from the downloaded packages. My gut tells me that someone was in my system mucking around.

  Am not a fan of the Windows registry because it allows keys to be surreptitiously inserted that I have no permission - even as an administrator - change.  People can edit your registry to open doors for them to come and go and give them the ability to run a remote software that does not appear on your screen.  They can run processes that do not appear in the list of processes.  Even if you think about it, once they take away your ability to see and remove their keys, you have no real way to do much.

  If someone in your system hacks the registry to defeat your security, it is not like a virus. If no virus checker will never see it.  He just thinks you want that your system is set up this way.

  Why Microsoft is not dating a utility that would allow an administrator to reset the Windows registry to a set of default values such as Windows returns to a State where it would be if it were installed with all the security current updates and drivers for hardware on the Microsoft Update site.  All entries in registry and other customizations user would be wiped off the register. No backdoor open, download closed.  In my opinion, it takes a utility like that and I'm certainly not the first to come up with the idea.  What stops Microsoft to release something like that?

  I think you are misunderstanding the registry and what it does.  I could spend a few weeks teach you this topic, or you could get books and studies.  But to list some of your misconceptions:

  1. the registry may only be changed by you by using the registry editor, or a program you gave permission to run on your system.  There is no way an Internet connection can edit your registry database, or the data that flows over an Internet connection.

  2. just put something in the registry is no harm either.

  3. somehow the registry cleaning as you suggest would kill every program installed on the system.  Any software that does not come with Windows (think, Microsoft Office, updated Internet Explorer, software utility, everything that you install) would probably be nuked and killed by such a destructive restore.  If all the drivers you have downloaded directly from the manufacturer, or provided with the hardware you have installed after that you did this registry restore. No hacker could do the kind of damage this type of restore registry would do to your system.

  If you suspect that someone can enter your computer, trying to protect or restore the registry is absolutely the wrong way to stop.  This is what software firewalls, antivirus, anti-spyware, etc. are for.

  'J T Schwager' wrote in the new message: * e-mail address is removed from the privacy... *

  Just installed a copy of Vista Ultimate 64 bit and got it upward and running without problem for a couple of days.  Today, the Internet stopped briefly and then minutes later he did again.  Suspecting an intrusion, I checked the relationship between downloaded to downloaded packages.  I looked at simply, does not download music, videos or something like that, and I had been on during a few hours.  Download Download the report is about 1 / 3 and I could see a lot of activity on the upstream with all browser windows closed and no open programs (other than background processes).  If it has been updated, I would see a lot more activity on the downstream!  So I shut down the system, disconnected my cable modem and waited to get a new IP address.  I don't think it is normal to see such a ratio and wait at least to a minimum, 01:10 regarding the packages downloaded from the downloaded packages. My gut tells me that someone was in my system mucking around.

  Am not a fan of the Windows registry because it allows keys to be surreptitiously inserted that I have no permission - even as an administrator - change.  People can edit your registry to open doors for them to come and go and give them the ability to run a remote software that does not appear on your screen.  They can run processes that do not appear in the list of processes.  Even if you think about it, once they take away your ability to see and remove their keys, you have no real way to do much.

  If someone in your system hacks the registry to defeat your security, it is not like a virus. If no virus checker will never see it.  He just thinks you want that your system is set up this way.

  Why Microsoft is not dating a utility that would allow an administrator to reset the Windows registry to a set of default values such as Windows returns to a State where it would be if it were installed with all the security current updates and drivers for hardware on the Microsoft Update site.  All entries in registry and other customizations user would be wiped off the register. No backdoor open, download closed.  In my opinion, it takes a utility like that and I'm certainly not the first to come up with the idea.  What stops Microsoft to release something like that?

• 5.3 of the ACS cannot work with two rules of service strategy

  Hello my name is Ivan

  I have a question about ACS v5.3 appliance.

  I have a v 5.3 ACS wo authenticate users wireless, as well as a cisco wlc. A profile is to business users and the second profile is invited.

  Business users must authenticate with Active Directory and the guest with WLC. Guest users to authenticate with the local database of GBA.

  I have set up two service political selection that correspond with the Radius protocol. The first rule is for users to Active Directory and the second is for users in

  the local database of ACS.

  When I try to authenticate users with active directory is OK, but when trying to authenticate users with the local database (Portal comments) GBA was trying to find the

  internal user in Active Directory, because math the first rule and the second profile cannot authenticate.

  When I change the order, first of all the State of users internal and second rule of users from Active Directory, internal users can authenticate in ACS, but

  in Active Directory users cannot authenticate.

  I think that my ACS authenticate only the first rule of the RADIUS to the Active Directory, not two rules of RADIUS at the same time. Or maybe there is a problem in the BONE of the ACS.

  Authentication separately is OK.

  Please could you help me to resolv this problem?

  I enclose my two rules

  Concerning

  Hello Ivan,.

  To solve your problem, you must configure your ACS so that the first selection policy (active directory) corresponds to only for users of the company and the other strategy of selection service (internal users) does not match.

  The second strategy selection of service must be only for guest users.

  If you use Cisco WLCs, it will be easier for you.

  Why?

  Because you can use 'End Station filter' easier to match the SSID.

  In feature selection policy, you build your game to the fine filter station (add it via the Customize button).

  Now, you must create two filters of end station, one is the ssid of comments and one corresponds to the ssid company. (tell how to create later)

  After you create the filter end station and match the selection policy of end station filter function, you have a political service selection matches corporate only guest SSID and other SSP the SSID matches.

  Now you can select different identity for the two SSP sources.

  Now for the filter end of station:

  End station filter is used (in our case) to distinguish the SSID.
  If I want to separate applications of different SSID, I use the end station filter to match what SSID I use.
  cretae end station filter to your SSID, follow the following image:

  

  on point number 4, write resounding brand (*) asteristk of your SSiD (case-sensitive), without spaces. Be sure to avoid spaces before or after.

  (I assume you are using cisco WLC. If not, the idea cannot be applied the way I described above).

  So far, we're OK, except one point. The default SSID guest is not sent by the Cisco WLC to the radius server when the client tries to connect to it, while the SSID of 802. 1 x is.

  To say the WLC to send the guest SSID, you must add this command to the WLC:

  RADIUS config callstationidtype ap-macaddr-ssid

  I hope I described correctly. Let me know if you got it or if you need more explanation.

  Greetings,

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Need help with XP, you try to restore the system to the mode safe mode with command prompt.

  XP does not start even in safe mode.  Can access the mode safe mode with command prompt. Tried to use the repeated suggestion here.  The said command is not available.

  http://support.Microsoft.com/kb/304449 I tried these instructions from microsoft are supported and the command will not be accepted.

  Any help out there?

  Hello

  1. What is the exact error message when you try to access the computer in safe mode?
  The issue seems to be with the corrupted registry that prevents Windows XP startup.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
  Note:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

• copy the operating system - backup drive - way to deal with

  I had to do this on 2 other newer computers purchased because no disk operating system was included in the purchase price, and I had to provide my own disks and copy it to myself. This compaq computer is 2nd hand and the back-up of operating drive was lost long before that I got it. After losing the computer has been reinstalled and registered. I would now like to make a recovery disc of my own to the operating system as a back-up to disk. I did this until my other computers however I was all threw the control panel and can not find the feature or place to start. you give me the path to start the registration process, please.

  You can back up the system disk to an image and get it back on the other two computers.
  because the system can not work in different hardware environments, the backup image must be restored with universal restore. I could not make it clear.
  Learn more about this article.

• live writing automation cannot deal with the mute switch or efx bad on/off...bad bad

  So if you mean mute a section of a track by writing automation live by turning the mute button market, the only way to do that is at an envelope at a time, and then stop playback, then press on play again and do the next envelope, press stop playin, and so on...

  If you try just keep on going and the envelopes are relatively close together, he will be like a diagonal line that it weakens or disable abrutely rather then just turn the mute or efx a far as you did when reading it is direct.

  Try it, it happens every time if you go in and out too fast.

  It should be able to follow, this is crucial, because without it's a lot of your time to get the power sequence you want for rhythmic passages, when you want on and apart from being in a certain rhythm based on other tracks or lyrics and these.

  Try playing with the settings under Edit > Preferences > multitrack > automation Options.

  Here's some of the Manual:

  Automation optimizations

  Contains options that determine how automated mix parameters are saved. (See Techniques for automating mixes.)

  Automatic correspondence unit

  Determines how fast parameters return to the original values in touch modes or lock. You can set values from 0.00 to 5.00 seconds; the default value is 1.00 second.

  Edit point linear thinning

  Removes all edit points that represent static and unchanging parameter settings.

  Minimum time interval thinning

  Creates edit points with intervals larger than the specified time value. Enter the time interval from 1 to 2000 milliseconds Minimum.

• System error: the program cannot start because mscms.dll is missing on your computer. Try reinstalling the program to fix this problem

  My system is Windows 7 64 Bit OS:

  Description of the problem:

  I get the error above with several programs: MS Money, MS Office and Picasa, but not all programs. Ex: Firefox, IE

  With Microsoft office programs, I get this error and when I acknowledge the error by clicking OK, application starts normally. With Picasa, I get the error and Picasa does NOT start.

  What I have done:

  I uninstalled and reinstalled Picasa without exploitation.

  I already uninstalled the recent programs that I installed on the PC.

  I have also run the command SFC on this file and I get the answer saying "Windows Resource Protection not found any breach of integrity.

  My ideas, please help.

  Ignore this request. I got the problem fixed.

  When I tried to go back to a previous restore point, Windows complained that the disc has errors and should be set before any restoration. Once I corrected disk errors in planning sweeping through reboot, mscms.dll problem disappeared and everything works fine.

  Thank you.

• Trouble Shooting basic steps if the printer cannot communicate with the computer.

  Here are the steps to follow if your printer has problems to connect to a computer for basic troubleshooting.

  USB:

  1. Make sure that the USB cable is connected sucurely at both ends.
  2. Make sure that the USB cable is connected directly to your computer.  If you have a USB hub between the printer and the computer, it can cause communication problems.
  3. Make sure that your do not plug the USB key into a USB 3.0 port.  HP printers do not work with USB 3.0 connections and can prevent the computer to see the printer.
  4. Make sure that the USB cable is less than 6 ft.  No more 6 ' can generate signals lose who will cause problems of miscommunication.
  5. Have a backup USB cable.  The truth is USB cables are good markets for be sold at low prices.  Sometimes they last for years without any problem.  Sometimes they are bad when buy you them.  It's really just a matter of chance.  The chances of getting a bad store fees are quite low, but it happens and it never hurts to prepare.

  Wireless and Ethernet:

  1. Follow all the steps in this document.  Do step in the document will ensure that your printer on the network and has a stable connection.  The only thing to change is under the fifth step.  Under the fifth step, it tells you how to set DNS information on your printer.  It tells you to use the IP of your router.  Do not.  Use the public DNS to Google for favorite 8.8.8.8 and 8.8.4.4 for the alternate.  The reason why I use Google DNS is twofold.  (1) HP printers seem to connect better with Google DNS.  (2) If your printer has web services, web services have a better chance to connect with Google DNS.
  2. If your anti-virus software has a firewall, disable it.  Anti-virus firewall can block network communication between devices on the same network, and disabling the firewall may allow communication to flow normally.  If the firewall is the problem, there are ports you need to open once you activate the firewall again.  These ports will be listed at the end of this post.

  These are the basic things that you can do if you think you have problems with the printer and computer to communicate with one another.

  HP printer ports
  UDP	TCP	Acronym	Definition	Used for
  137	137	NetBIOS	Network Basic Input/Output System - (basic communication)	UDP: Card printing, Photo Upload
  138		NetBIOS	Network Basic Input/Output System - (basic communication)	UDP: Photo card download
  	139	NetBIOS	Network Basic Input/Output System - (basic communication)	TCP: PhotoCard Upload
  161		SNMP	Simple Network Management Protocol - monitoring network devices	UDP: print
  427	427	SLP	Service Location Protocol (know what things can do on the network)	UDP: Card printing, Photo Upload, scan, fax, Installation
  	9100	PDL	page description language - print control language (how the printed page you want to watch)	TCP: print
  	9220			TCP: Scanning, fax
  	9500			TCP: scanning

  I hope this helps.

• Use video limiter first to meet the specifications of broadcast specific "color difference".

  Hello

  I received form specific color of broadcast and I'm not clear on how the units of translate video limiter of the Prime Minister. For my current project, I was asked to keep the difference of color component as follows:

  Positive max: 350 mV

  MV Black 0.0

  Negative Max:-350 mV

  How these numbers translate into first video limiter saturation % Min/Max settings? Smaller secondary question - how translate in scope Lumetri YUV Parade IRE units?

  Thanks for your time

  What they do they mean?

  UH... with a degree of difficulty? I never saw a "specific list" of what the numbers in the video limiter translate, so no help with that.

  shooternz or SAFEHARBOR11 might have some thoughts here and perhaps RameezKhan could help tech... but for that kind of specific thing, running ScopeBox on another installation of the monitor is that most colorists do to check this kind of thing. It is designed to give you good numbers of techniques & such.

  Neil

• Removal of the specifications of customization with Dr.-ip-customizer

  Hello

  I have three scripts of customization in my DR environment:

  

  I would like to get rid of them, because one of the servers no longer exists, and there are two scripts for the other. What I've read, it seems that the removal of the GUI is not a good thing (don't know why), so I tried to use the command 'drop' of the to do.

  So I run the following command to create the. CSV:

  VMware vCenter Site Recovery Manager\bin D:\Program > Dr-ip-customizer - cfg... \config\vmware-Dr.xml - csv d:\prod.csv - cmd generate

  It then creates the. CSV which contains entries for all protected of the VM, but does not list any of the indications for STMTEST. I then changed to remove all the lines containing the entries outside these two virtual machines (so two entries left, one for the shadow-vm-6448 and one for the shadow-vm-11151), and save the file.

  I then ran the customizer again:

  VMware vCenter Site Recovery Manager\bin D:\Program > Dr-ip-customizer - cfg... \config\vmware-Dr.xml - csv cmd d:\prod.csv - drop

  Part of the output includes:

  Deleted CustomizationSpecs out shadow VMs on VC.

  Everything looks good, but my customization scripts are still there.

  I have also tried to manually edit the prod.csv file to add entries manually and re-run the command 'drop '.

  

  Still no joy, the scripts are just going.

  Has anyone encountered this?

  After playing a bit with custom specifications, there are my conclusions:

  1. drop command detaches and removes the custom plug attached to the existing placeholders

  2 drop command deletes the customized specifications that are not attached to any placeholder, but the placeholder with ID and name exists

  3. drop command removes renamed not care or care of non-existent placeholders

  4 command drop do not detach or remove the personalised if you provide a CSV file "base" which was created by 'generate' command. You must provide the CSV file that you use for the command 'create' (with all the properties at the breast).

• my system meets the requirements for firefox 4/5, but he refuses to download

  iBook G4
  OS X 10.5.8
  Memory/space

  Firefox 4 "downloads", but with an icon "forbidden" superimposed, and then my computer does not recognize that it is running, it

  Firefox 4 & 5 requires at least OS X 10.5 and an Intel Mac. There is a version of third part of Firefox 4 and 5 that runs under OS X 10.4/10.5 and PPC Macs, for details, see http://www.floodgap.com/software/tenfourfox

  If you prefer, you can get the latest version of Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.