Satellite L10W-B - current trackpad problems

I bought a Satellite L10W-B 6 months ago. Since then, I found the trackpad to be steep and difficult to use.
It works fine if I don't hold a mouse button, but while holding a key it does not move.
It's very frustrating.

Any suggestions?

You said that the touchpad does not work well, while pressing the button.

Hard to say what's not here but the fact is that all the touchpad settings and properties can be modified:
Control Panel-> mouse-> last (Properties tab of the device)
There, you can try to increase the sensitivity of the touchpad.

Alternatively, you can try to reinstall or update the driver for the touchpad. The package should be available on the Toshiba driver page.
So in case the question mentioned is related to the failure of software, the update should fix permanently.

Tags: Toshiba

Similar Questions

  • Reboot and select proper on the Satellite L10W-B1768 boot device

    Dear

    I have this error in my Toshiba Satellite L10W B1768

    Reboot and select proper boot device

    or insert boot media in selected boot device and press a key

    I can't do recovery also USB does not work, I try to install windows from USB / driver external CD/DVD, but not the work redirect me to this page

    Reboot and select proper boot device

    or insert boot media in selected boot device and press a key

    I tried pressing the '0' key, nothing happens

    I tried "F12" don't get recovery options.

    also in the configuration of the bios not UEFI and CSM (in the advanced-> System Configuration)

    How can I solve this problem?

    Dear

    I have a problem in my toshiba Satellite L10W-B1768

    "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

    I do not get an option «HARD drive recovery» If I press the "0 or F2" key multiplication, even the boring massage.

    How can no recovery Option, I solve this problem?

    also I restore the values by defect of the BIOS but same problem

  • Satellite Pro U300 Expansion Chassis problem

    Hello fellow users.

    I am trying to use an expresscard with my satellite pro expansion chassis. Problem is that in Device Manager, I am getting error code 12 for PCI bridges in the chassis and the error code 31 for the PCI bridge on the card I want to use in the expansion chassis.

    I installed latest version of the BIOS but cannot solve the problem.

    Slot for Express card in my computer is fine because I use an Ethernet Express of 1 card G without problem.

    Hunting on the web, it seems that the problem is related to the BIOS being unable to handle the number of PCI bus in the system, refer to the knowledge base article 942959 Microsoft. This article explains the problem and how to Vista and W2008 reslove.

    I am running XP and work around, that they said, does not work. Upgrading to Vista is not really an option as software I want to use is not yet the version for Vista.

    My only options left at this stage are fresh install XP to see if it corrects the problem, or vista fresh install and hope I want to use drivers/software works under Vista.

    Has anyone else seen this problem, got any other suggestions.

    Thank you very much

    Hello

    your problem is unusual, but what I want to know is: which model / manufacturer, what is this expansion chassis?
    It would be interesting since without knowing what we´re talking expansion chassis, it would be difficult to know where exactly the problem could be...

    Greetings

  • Satellite A660 - 190 (PSAW0E) some problems after BIOS update

    Hey,.
    After updating the BIOS for my Satellite A660, I have some problems with toshiba apps 2:

    * 1. HWSetup - is not working. When I try to open it there is an info: *.

    + "Microsoft Visual C++ Runtime Library
    + This application has requested the execution to terminate in an unusual way. +
    + Please contact the support team of the application for more information. » +

    * 2. FN key is not working *.
    (a) after the installation of the package of added value + Toshiba Wizard cards Flash Utility
    * When I hit FN keys I don't see the keyhelper on the screen, pressing FN + F6 or F7 or others - there is no action
    * the keys are not working and I can set up and then

    (b) after uninstalling VAP + Assistant Toshiba + cards Flash Utility
    * When I hit FN key I still don't see the keyhelper, but I can change for example brightness by pressing FN + F6 or F7
    * the keys work correctly, but I can't configure the

    Anyone can solve this problem WITHOUT having to reinstall the system?

    Toshiba Satellite A660-190 (PSAW0E)
    Microsoft Windows 7 Home Premium

    Hello

    Try this:
    -Uninstall the VAP and Flash memory card Support utility
    -Install CCLeaner and clean the system and register using this tool
    -Now reboot the laptop and install the latest version of VAP. Use the VAP Advanced installation option and check if all the components of VAP are checked.
    -After installation of VAP, restart the laptop and test the FN keys.
    -If the FN buttons would not work, install Flash memory card Support utility.
    -Restart and test

  • Satellite A300D-11 q battery problem

    Hello!

    I was on the point of start almost the same topic, when I saw there was very similar question several hours - [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61884&tstart=0]. Yet, I decided to share my problem.

    I have the Satellite A300D-11 q PA3534U-1BRS 4000 mAh battery and 10.8 V.
    The difference in my case is that I bought a new battery, PA3533U-1BRS, 7200 mAh, 10.8V, but a third-party manufacturer.
    Before that, I was told by the official service of Toshiba PA3533U-1BRS is compatible with my computer. Of course, this trusted third party (Brainydeal, a U.S.-based company., but the battery is made in China, by AGPTEK). It was pretty tempting as the price was half that quoted by Toshiba for a 6000 one mAh. And there were 16/16 sides of 5 stars on Amazon for the same battery.

    So, the problem. I had very similar flashing red LED, but nevertheless the battery could be charged and was able to power the laptop for about 2 hours. However, the computer could not get information nor on the level of load (and therefore couldn't not to assess what is the period of hibernation, so was suddenly stopped), voltage, or manufacturer.

    And the model seems to be PA3593U-1BRS depending on the software (Lavalys Everest and also BatteryMon).
    I've had a few matches clumsy with Brainydeal where they assured me that the battery is high quality and all going well, 3593 is compatible with my laptop model.

    Finally, I returned it to the manufacturer for replacement, and yesterday, I received a new. However, the same is happening again.
    Exactly the same thing.

    Before writing back to the manufacturer, I decided to check here for review.
    May be the battery Electronics is a failure?
    Or could it be somehow related to the fact that the computer is purchased the battery - of the USA and Europe? Or I just had very bad luck?

    Post edited by: marchemence

    Just one question: the old battery is working correctly?
    I mean do a blink led using the old battery or only the new battery?

    I read in some discussions that last BIOS should be used for series Satellite A300 to solve some problems of battery.

    Please check if you are using the latest version of the BIOS!

  • Satellite L500D - Iinitially had a problem "could not load the profile.

    Satellite L500D initially had a problem 'could not load profile' then stop. It is now the windows installation discs that I don't have. Where can I get them? They can be downloaded from Microsoft or Toshiba sites?

    Error message:
    File: \boot\BCD
    Status: OxcOOOOOOf
    Info: an error occurred while trying to enter the boot configuration data

    ANY HELP WILL BE GREATLY APPRECIATED THANKS

    Hey Buddy,

    > They can be downloaded from Microsoft or Toshiba sites?
    No, the disc can t be downloaded because it s not for free.

    You can start in safe mode?

    In the worst case operating system is confusing to the top and you have to reinstall Windows, but so you can take the Toshiba Recovery disk that will restore your notebook back to factory with all the drivers and tools of Toshiba.

  • Enter the current password problem

    PL help me to enter the current password problem in my cq10 mini compaw

    CNU0023532

    Thanks T_T

    Hello

    Enter: e9l117fqf7 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • I am currently having problems with my Zune software: Microsoft Fix it 50577 error.

    I am currently having problems with my Zune software

    and for this reason I turned to Microsoft Fix for... fix it, but every time I start it I get this error:
    "An error occurred while attempting to create the directory: C:\Users\***my name * \Appdata.
    original title: Microsoft Fix it error 50577

    Hello

    I suggest to ignore the fix and follow the steps in the "More information" category of the link.

    How to remove and then reinstall the Zune software

    http://support.Microsoft.com/kb/929358

    If you still have any questions, then contact Zune support itself additional troubleshooting:

    http://answers.Microsoft.com/en-us/Zune/Forum

    Hope this information is useful.

  • Satellite Pro A100 and load problems

    Hello everyone. New Member here.

    Got a huge problem with my laptop. I have a satellite pro A100-830. Part number: PSAACE-00W002EN. About 2 years ago

    I can run on the current system. But it will not work on battery. I just bought a new battery and it shows on the computer.
    I get indications are:

    battery charge amber lit.
    Light on power
    Power meter indicates the battery charge. I connected new battery and it shows 47% and now 3 hours later its still 47%
    If I unplug the power to the computer shuts down and will not work on battery.

    the AC light seems to be slightly duller than the one next to him, if that makes sense.

    Ive tried updating the BIOS etc but I'm ideas if im honest as im not a computer pro. I searched the internet but I can't find an answer

    Huge thanks in advance

    Stand by.
    We need more explanation here.

    You have the same problem with the battery and you have bought one new in the hope that everything will be OK?
    Have you noticed the same problem with the battery?
    You bought original Toshiba battery?

    In my view BIOS update won't help you much. I think electronic power is responsible for this BIOS update ahs no influence on this.

  • Satellite Pro 4600 battery recognition problem

    Hi all

    I have a strange problem with my Satellite pro 4600 (SP460E-03371-G3) laptop. I have the battery with the AC adapter unplugged, but the battery indicator turns on (no green, not orange). And the laptop does not start when I push the power button. It's like when the battery is discharged. When I plug in the power adapter, AC power light turns green, Notepad starts OK. And cams CIHI surprise: when I plug the AC everything works perfectly on battery power, but still no sign of the green or orange battery indicator. If I check the power state in Windows XP, the system indicates that the laptop works on current alternative, but the AC is disconnected. Why is this?

    Thank you
    Akos Monostori

    Hello Ákos

    I'm sure that there are defects of electronic power to your laptop. As you can see electronic is confused and the battery is not recognized correctly.

    In my opinion, you should contact the Service of your country partner and ask them what is the best way to solve this problem.

  • Installation of Satellite P200-144 recovery disk problem

    Model Satellite P200-144 PSPBGE

    Hi all

    Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

    Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

    My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
    Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

    In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

    Try to rename all the letters of potential left to HDD0
    Try to rename all the letters of potential left on HDD1

    Microsoft DiskPart version 6.0.6000

    Copyright (C) 1997-2007 Microsoft Corporation.

    On computer: MINWINPC

    Disk 0 is now the selected disk

    DiskPart succeeded in erasing the disc

    DiskPart succeeded in creating the specified partition

    Partition 1 is now the selected partition

    DiskPart successfully assigned the letter of the drive on the mountpoint.

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart succeeded in creating the specified partition

    Partition 2 is now the selected partition

    DiskPart successfully assigned the drive letter or mount point

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart marked the current partition as active.

    Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
    RECO-info-imagecount value = 2
    define the RECO-info-partnumber = 1
    RECO-info-numsplit value = 5
    RECO-info-bootindex value = 0

    L ' ImageX for Windows tool

    Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

    Progress: 67% 06:44 minutes

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    Error image restoration.

    The file or directory is corrupted and unreadable.

    Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

    Is there a reverse this problem?
    My thoughs is that the image is corrupt.

    The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

    Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

    If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

    0844 847 8944

  • Satellite L755-128 - CPU compatibility problem

    Hello dear colleagues,

    As the title says, I have a Toshiba Satellite L755-128 code PSK30E. He has a 2nd generation processor Intel i5 - 2410M.

    Laptop that works fine and everything, but I recently got a nice agreement on a more recent laptop with lower overall record, but a better processor. It's an and Latitude E5530, with a 3rd gen Intel i5 - 3230M.

    Go to the Intel website, I saw that basically two processors have the same TDP of 35W and the same size of package, both run on HT and have two hearts, the only difference is that architecture from 32nm to 22 nm and the frequency is higher.

    In addition, 2nd generation supports 1066/1333 MHz memory, and 3rd generation supports 1333/1600 MHz. My memory is 1333.

    Of course, as you may have guessed, I intend to swap the processors between the two laptops. Updated the BIOS on both of them, then replace the processors, re-assembled and starts, surprise: The recognized enjoy the old version of i5, ran fine and all, but Toshiba does not.

    He just opened when I pressed the button, but the screen remains black. Then I pressed the button again, it also normally stop. (I repeat, already updated BIOS update, as someone recommended). I disassembled again the Satellite, check if everything is in place, and second starting time still the same.

    Then, I am annoyed and exchanged in return on their original laptop processors. And both of them work fine.

    So if someone has encountered this problem could you please indicate if you managed to sort it out?
    What seems to be the problem, not the Satellite Map mother does'n not support 3rd generation Intel?

    If so, why? Or if that would work, what should I do?

    Thank you in advance!

    Hello

    I put t know any laptop manufacturer that officially would fund an upgrade of the CPU.
    For the most current updates on laptops are your own decision and no one could provide you with a confirmation that your laptop with new processor work or run correctly.

    Indeed many people try to update processors, and in many cases, it also works on Toshiba laptops.

    But there are a few important notes:

    (1) you must ensure that the chipset of the motherboard would support new CPU. In case it doesn't, you can not use

    (2) even if the new processor would be supported by the chipset, it is still pending regarding BIOS support. BIOS is changed for each series laptop and it is possible that some processors would not fully compatible or supported by the BIOS.

    As you can see, the upgrade of the CPU is not very easy and it s no matter that a laptop computer that was equipped with the same processor the L755 takes in charge the other CPU there are many more factors that could affect these updates.

  • Satellite L670-1KZ - update driver & problem with game ARMA II

    Hello world

    I just bought this satellite L670-1KZ in France, and I've already found fews updated.

    But, before you do anything, I want to have comment and recommendation of other owners, to ensure that the files that I have are useful and cannot be damaged something (never know).

    (1) UPDATE RECOMMENDED OR NOT?

    It's the list of the update that I found:

    ATI Mobility Radeon HD 2000/3000/4000/5000/6000 version 11.3 WHQL
    Manufacturer: ATI Technologies Inc.
    Version: 8.831.2.0000
    The name of the inf file: c7115930.inf
    Of date inf file: 03/08/2011
    Date of publication (online): 30/03/2011

    Version of Realtek driver High Definition Audio R2.57 WHQL
    Manufacturer: Realtek Semiconductor Corp.
    Version: 6.0.1.6299
    The name of the inf file: hdapcee3.inf
    Of date inf file: 25/01/2011
    (Online) publication date: 02/09/2011

    Realtek RTL8100/8101/8102/8103/8105/8401/8110/8111/8168/8169 version 7.037.1229.2010 WHQL
    Manufacturer: Realtek
    Version: 7.037.1229.2010
    The name of the inf file: rt64win7.inf
    Of date inf file: 29/12/2010
    (Online) publication date: 02/09/2011

    Realtek RTL8191SE-VA2/RTL8192SE version 2019.1.1203.2010 WHQL
    Manufacturer: Realtek Semiconductor Corp.
    Version: 2019.1.1203.2010
    The name of the inf file: net8192se.inf
    Of date inf file: 12/03/2010
    (Online) publication date: 02/09/2011

    Intel Chipset Device Software version 9.2.0.1025 WHQL
    Manufacturer: Intel
    Version: 7.0.0.1013
    The name of the inf file: ibexahci.inf
    Of date inf file: 06/08/2010
    Date of publication (online): 03/09/2011

    Intel Rapid Storage Technology ICH7/ICH8/ICH9/ICH10/PCH version 10.1.0.1008 WHQL
    Manufacturer: Intel
    Version: 10.1.0.1008
    The name of the inf file: iaahci.inf
    Of date inf file: 11/06/2010
    Date of publication (online): 12-21-2010

    (2) ON THE VIDEO CARD:

    Also, I used an Amilo Xi 2550-8009 underpinning last week, I changed it to this Toshiba, but I am facing a problem with a game ARMA II.
    I got the error message is: 'Pixel shader compilation error', with a black screen and sound of 'ping '.
    I don't understand because I found a comparison test with a GeForce and my current HD5650 which is supposed to support this kind of thing shader.

    Have you managed to run ARMA II on your laptop? If so, what did I miss?

    Thanks in advance for your comments have fully appreciated,
    G2MARS

    Hey,.

    Generally these driver updates are not important if everything works properly. So in your case I don't install these updates if your laptop runs without problem.
    As you probably know: never touch a running system ;)

    Regarding your second question:
    Have you checked if ARMA 2 supports this graphics card? Have you installed the latest DirectX and more recent patch for this game?

  • Satellite A100-225 - charging battery problem

    Hi people,

    My Satellite A100-225 can't hold the charge when running. If I use processor heavy applications, the battery will drain in about half an hour and recharge only when the cover is closed (standby mode) or the laptop is turned off.

    When the exhausted battery and the laptop turns off, I have to remove the battery, press the on/off switch, replace the battery, then let it charge for a while before I can use it again.

    The laptop will power any if I remove the battery and the runoff of current alternative.

    I tried a spare battery, but exactly the same thing happens.
    I also updated the Bios with the latest version (6).
    Laptop runs Windows XP Home Edition.
    Laptop is out of warranty.

    Anyone have any ideas?

    See you soon
    Steve

    Looks like a hardware problem. I mean, if your battery runs out when the machine is connected to the pit of the wall adapter (this is what I did not understand), so something in the subsystem of your laptop power goes down.

    Have you ever sent the machine to a partner of service authorized or is the machine still under warranty?

    Welcome them

  • Satellite C660 - connection Wi - Fi problems

    Hello

    I have the Satellite C660 with windows 7 64 bit which continually lost the wifi connection. The problem has been compounded in recent weeks. It takes the point a is the only one to connect with a network cable.
    I updated the driver for the current version 1005.23.622.2011 without success. All our other laptop have no problem with the wifi connection.

    Can someone help with this problem of frustasting before I go out a buy a wireless dongle?

    Wayne

    Hello

    Have you noticed this problem with an adapter connected to your laptop computer or power supply battery only?

Maybe you are looking for

  • A100 replacement hard drive

    I saw the other posts on this but no definitive answer.My HARD drive is dying and needs to be replaced. I see the posotion from the LHS is under the Palm drive and there seems to be one removable flap - other posts say there is only one screw to remo

  • VI locked at the end of the sequence

    Hello I'm pretty new to LabVIEW and very new to TestStand, so I hope it's just a case of me being a bit thick. I have a sequence calling a few screws it is a mixture of purely based on windows screws and a host of Windows VI for an FPGA on VI. If I t

  • Change the peak of the sine wave in a time interval

    Hello I had a sinusoidal signal. With peak detection, I can get its peak and after he group thus places, I can get a XY chart that indicates the time vs pics. However, all the 10s, the pic will change. I would like to show the continuous change of ve

  • Data recovery - data access

    Today my computer crashed... I tried the auto repair as well as several restorations without result. I arrive quickly to the realization, I have to reset it to factory settings... Today, I brought a HDD dock for my 2.5 SATA drive that I took on my la

  • my pictures are coming out on the side when downloaded on my computer what can I do to solve this problem

    When I download my photos from my iphone to my computer they come out backwards what can I do to solve this problem