System recovery on Satellite M100 because the reader of CD/DVD not being recognized

Similar Questions

• The system cannot open session now because the domain is not available

  Hello

  I met the problem of windows cannot open a session after I installed the MicrosoftFixit50588.msi.

  I need to turn on the CredSSP and download & run the site MicrosoftFixit50588.msi Web [url] http://support.microsoft.com/kb/951608/en-us [url]

  He asks to restart the PC after the installation is complete. After that I restart my pc and I could not log on to windows and get the error message "the system cannot open session now because the domain is not available.

  the user's machine: Winsows XP Pro SP3

  Anyone know how to fix this? I urgent need, thank you.

  Kind regards
  Grace

  Hi Grace,

  1. is the computer connected to a domain?

  2. are you able to boot into office?

  I suggest you follow the link below and check them with the question:

  The system cannot open session now because the domain is not available:

  http://support.Microsoft.com/kb/824302

  I hope this helps.

• the system cannot open session now because the domain d57jz6d1is is not available

  IM computer work for someone elis I get this error (the system cannot open session now because the domain d57jz6d1is is not available) when trying to open a session even in safe mode has the computer versions xp with sp2 on it it is a mistake to real windows or if someone know a work around for help would be appreciated.

  The cached credentials are limited or their expiration, you must connect to the domain to log on or you need to log on with a local account.

  John

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

  Original title: loss of entrance of Protocol in the list of saved files

  I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

  Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

  It's a good thing, I thought of the research on other boards for my missing post.

  HKEY_LOCAL_MACHINE\Software\Classes\mailto

  c. in the Edit menu, select new, then clickstring goodwill.

  d. type of Protocol of URL as the name of the new string value

  e. exit the registry editor

• vISTA can NOT DETECT THE READER of CD/DVD,

  WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?

  CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media Player cannot play the file because the required video codec is not installed on your computer

  How to make the necessary corrections?

  This is the error message that I keep getting when I try to view a previously recorded Webinar
  Windows "Media Player cannot play the file because the required video codec is not installed on your computer"
  How can I fix it? Help, please!

  Thanks for the link, but I don't want to become
  a member of this site in order to view the video.

  No guarantee... but it may be worth trying to
  Download and install 'one' of the following codec
  Packs.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows 7 - create a Restore Point
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  Proceed at your own risk *.

  Windows 7 Codec Pack
  http://www.windows7codecs.com/
  (Windows XP - Vista - 7)

  Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows XP - Vista - 7)

  Win7codecs
  http://www.MajorGeeks.com/Win7codecs_d5959.html
  (Windows - author all: Shark007)

  Info on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (Windows XP - Vista - 7)

  Good luck...

• Message: Cannot perform this operation because the default mail client is not properly installed

  I get the following error message:

  Cannot perform this operation because the default mail client is not properly installed

  Could someone help me please?

  Moved from the community involvement Center

  Hello

  You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

  The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Windows Live Mail is popular
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
  Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

  Windows Essentials help:
  http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

  You can access outlook.com via Windows Live Mail

  Set up an email application with Outlook.com - Microsoft Windows Help:
  http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

  Web-based e-mail services can only be made the default e-mail program in these 2 cases:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with the installed Google toolbar

  https://support.Google.com/toolbar/answer/34800?hl=en

  Don

• Error hpqtra.08.exe - Unable to locate component this application could not start because the WINSPOOL. DRV was not found.

  Original title: I have Security Essentials, but still had this - HELP!
  I get error hpqtra.08.exe - Uanle component not found. Then he said: this application has hurt to start because the WINSPOOL. DRV was not found. This applicvation reinstalling may solve the problem.    Any clues on what to do?

  Try to reinstall your HP Imaging software and printer drivers.

  Jim

• Trying to fix my sound. Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed.

  original title: NO SOUND on MY WINDOWS XP

  I'm unable to install my Volume icon.  I went to the control panel and it tells me to go to add/remove programs.  I did all this AND still cannot get any sound on my Windowns XP.  I've exhausted ALL my options.  I need help please...

  Trying to fix my sound.  Gettinng "Windows cannot display the volume on the taskbar control because the keys control program has not been installed.  "To install it use Add/Remove programs in the control panel" that IS NOT WORKING

  Hello

  I'm assuming that you're missing sndvol32.exe
  Here is a download link:
  http://www.Firstload.com/?IR=1&fn=sndvol32.exe+download
  It may be useful
  Mike

• When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

  When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

• Windows cannot display the control of volume on the taskbar because the volume control program has not been installed

  Windows cannot display the control of volume on the taskbar because the volume control program has not been installed
  Why a how can I fix this is where, until I rebooted after a windows update

  Here is a link to try. Good luck: http://support.microsoft.com/kb/319095.

• Cannot perform this operation because the default mail client is not properly installed... help

  I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

  Thank you

  A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

  HAL

  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

  I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

  In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

  Note: Office 2010 Home and Student Edition is not include Outlook.