System Restore didn't complete-no specified error

Similar Questions

• When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

  When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• System Restore change my backup settings 0x810000ED error Code

  I was not able to make windows backup error (C) said 0x810000ED said invaled way for some files

  Hi SandraPrice/Newman,

  ·         Why did you try System Restore?

  ·         Do you have the means to say that the backup does not work after restoring the system?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow the steps to perform the check disk (chkdsk).

  (a) click Start, type cmd in the start search box, right-click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.

  (b) at the command prompt, type Chkdsk/r, and press ENTER.

  (c) press y when you are prompted to check the drive the next time the system restarts.

  (d) close all applications and restart the computer.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3: Check the status of dependent services backup. Follow these steps:

  (a) click Start, type services.msc and press to enter.

  (b) double-click Backup Windows and Volume shadow copy services.

  (c) make sure that the startup type is automatic and the services are started.

  (d) apply the settings.

  Reference: http://windows.microsoft.com/en-us/windows-vista/Back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• Get failure catastrophic error when running the system restore

  Original title: System Restore

  When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

  Anyone knoe what to do to fix?

  Thank you

  Maggie

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

  It will be useful.

• System Restore error ox800705aa

  I tried to do a system restore and got the message "unspecifed error has occurred during the restoration of the system (ox800705aa).

  Hi jloller,

  To work around the error code, please follow these steps.

  1. close all applications that are not necessary to perform the backup.

  2. ensure that you have sufficient disk space on all the drives where system restore is enabled

  3. turn off any antivirus/firewalls installed on the computer. Very well, they can interfere with the backup process. If antivirus software is being used, close to its icon on the tray (a small icon next to the time). Close it by double-clicking on the icon and selecting Disable. Refer to the documentation for the anti-virus software for more information on how to disable it.

  4. perform the clean boot in order to avoid all possible scenarios of a third-party service interferes with the backup process. Once the system is in a clean boot state, run the system restore.

  Reference: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Notes:

   

  ¯ Run the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

   

  ¯ Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the above article.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think. 

• Error of full system restore VAIO FZ-430E/B 35 323

  My laptop Vaio FZ-430E/B has been does not start. I replaced the hard drive (500 GB SATA) and used my recovery discs - full system restore. I received the following error message: 323: 35. I watch all the sony Web page and internet, I don't know what means this error message.

  I ran the Vaio hardware diagnostics: no error

  I can't run the Windows Memory Diagnostic tool. I just doesn't work.

  What does mean 323: 35?

  I installed 4 GB (2 x 2 GB) of RAM Corsair. I used the Ubuntu Live CD Memtest. No errors.

• Virus SMART HARD drive - cannot access Admin folder or WF - error 0 x 80070005 using system restore

  original title: need help for the restoration of the system

  I got the SMART HDD virus. I thought that this one has been removed. I can access everything but my admin folder and my Windows Firewall. I tried a system restore but I get an unknown error 0 x 80070005.

  4/11 is also the furthest I can go back when there was an update. Why can't come back all other - can only be hidden by the virus too?

  Hello

  Disabled first happened to scan your system with MSE or another anti-virus program? You have scanned your system with Malware bytes? Before restoration, it is best to make sure that your system is clean. Some viruses will infect the system and also infected restore points, you did.
  MSE: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Malware bytes: www.malwarebytes.org
  If you are unable to run these is normal mode, then try safe mode by pressing the F8 key for the system to start.
  I hope this helps.
  Jim

• My system restore function has a problem, error: AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll

  original title: my system restore function has a problem

  my system restore function has a problem

  error signature

  AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll
  ModVer.5.1.2600.5512 offset 00009836

  What can I do to recover my system restore feature?

  I was going to do an installation of hotfix os from the orignal disc but got waring the operating system installed is newer than the one on the disk (I have installed the latest service packs)

  Hello

  1 did you changes to the software to the computer?
  2. what happens when you try to use the system restore? You get the error message?

  You get this error message if you already have a newer version of the operating system and then if you try to install an older version on it.

  Method 1.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows XP.
  e. when Windows starts, try using System Restore and verify.
   
  Hopt this helps.

• My system is continuously restarting and willingness to complete start only in safe mode. System Restore will not work even through DOS command. What to do next?

  Running Vista SP2 64 bit on a Dell Inspiron 530.  System will come up to the login window, if there is no connection - will restart on its own, repeatedly.  It will allow me to log in, but as soon as I get on the desktop, in a short period of time, it will restart.

  I am able to connect through safe mode and safe mode with networking mode.  I tried the system restore by selecting many different restore points using rstrui.exe / offline: C:\windows command safe mode.  The operating system is running on the C drive.  Status on C «Ready to restore» watch

  He always enough immediately cause the error:

  System restore failed... System restore failed due to an unspecified error.  The parameter is incorrect.  (0 x 80070057)

  I did not knowingly install something again before that happens.

  What to do next?

  Hello

  Here's how to use the system without a command restore.

  http://bertk.MVPs.org/html/restoresysv.html

  And information of Dell.

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  Reference Dell troubleshooting with startup problems:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

  Run the built-in diagnostic software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  And if this does not resolve your problem, please contact Dell or their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• What is the next step after an unspecified error occurs during the system restore

  My computer shuts down saying windows has been shut down to avoid damage.

  disable or remove all equipment recently installed software.

  System Restore does not complete successfully.

  How can I find the dates various programs have been installed. I can find the programs, but not the date they were installed.

  The problem began in mid-September, so I would like to search by dates.

  I have dates for updates to windows, but not programs other than windows.

  Hello

  This can help you with problems with the system restore:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Filas system restore with error 0x8007045D i/o device

  I'm trying to do system restore in Windows vista on a computer laptop sony vaio. I am getting following error:
  System restore failed due to an unspecified error.
  The request could not be performed because of an i/o device error (0x8007045D)

  He's going to tell me what I/O device is a failure.
  How to work around this problem?

  Any help would be appreciated.

  Original title: I'm trying to do system restore in Windows vista on a computer laptop sony vaio, and the restore fails

  More often this kind of IO errors are related to the hard drive.
  If chkdsk doesn't fix it, try free hard drive Diagnostics here: http://www.carrona.org/hddiag.html

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Execution on the system restore error

  Hi, I have a problem with my PC and tried to do a system restore, but I get the following error when I try: "Microsoft Visual C++ Runtime Library." This application has requested the execution to terminate in an unusual way. Please contact support for the application for more information. "I have Windows Vista.  I tried to do a restore of the system Safe Mode, nothing works. Help, please. Thank you!

  Hello

  · What is the reason to perform the system restore?

  Try the methods and check them off below if it helps:

  Method 1:

  Try to restore the computer to a different date and check the results.

  Method 2:

  Download Microsoft Visual C++ 2010 redistributable and install the same.

  You can download from the link below: Package redistributable Microsoft Visual C++ 2010 (x 64): http://www.microsoft.com/downloads/en/details.aspx?FamilyID=bd512d9e-43c8-4655-81bf-9350143d5867