System Restore is cut by an inproper shutdown

Similar Questions

• Cut during the system restore? now I get no picture just a black screen refresh

  I used the system restore to fix my pc to a previous point, because I wanted a fresh reboot... Unfortunately it was closed somewhat during and now all I get is this threatening black screen that updates constantly. I don't have a recovery disc, it's a gateway DX4200.

  Hey I fixed, it was the card must have fried or something...

• Equium L10-142: no sound after system restore

  Hi there I got a Toshiba Equium laptop since May / June ' 05 (the model on the bottom is EL10-142, so I guess that its a L10?) Never had a problem with it until it completely crashed at Christmas. A friend who is a computer enthusiast has got completely restored back to factory settings by using his Toshiba A60 Back Up Disk (the software provided with it is not found) and downloading the drivers from the Web from Toshiba site.

  Now, he works very well except one thing. There is no sound.

  I tried all suggestions from the Microsoft Assistant help regarding no sound, ensuring that the FN Esc key had not accidentally pressed, the Volume Module in the control panel was all upturned and not cut, ANY - but to no avail.

  There are a few drivers who must always be installed (did not really a clue where to get them going on the site of Toshiba does not give me and his work and do everything I need OK so Im not bothered) so I though maybe that was the problem, but oddly when I went into the thing of drivers Diagnostics He said that the Realtek AC97 driver has been installed and working properly.

  Help!

  I don't see what there is to do to fix this and it was definatley caused by thte system restore, as his was not a problem before the great crash.

  Any advice you have would be greatly appreciated.

  Thank you

  E.

  Wait a minute; you said that your friend used the recovery CD Toshiba for the A60 Equium L10on!
  I m not surprised that noise does not appear. You cannot use a form of another laptop recovery CD!

  If you haven t the recovery CD right you need to order or you will install the operating system from the Microsoft Windows CD and then you download the drivers from the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com/->-> support-> support homepage & Downloads Download drivers

• System Restore op after failure of HARD drive and replacement

  Hello

  I have an old laptop dv9000 with XPPro factory installed SP2, since upgraded to SP3. The hard drive failed (Seagate 80Gig). I checked with the test of the bios Setup, he said "fail" and I checked by booting from the windows installation disc CD player. He said, not found hard drive. SO, I bought a disc bytes of more 1 t (same mfr Seagate, same 5400 RPM) and installed. I have a backup network (Seagate Black armor) drive and I was able to restore the last backup. The booted cd drive the recovery disc for this program, the hard drive light blinking and it seemed to be something for 3 hours, then told it was full.

  But the new drive does not start. I've read on this forum and of the joint recommendation was to use the system provided with the laptop recovery disks. I dug through the boxes in the garage and have found the system recovery discs and my 14 cd makes system restore. :-) makes to keep unwanted sometimes. But I tried the system recovery disk and it will not start in the cd player. I get a white screen with the cursor in the left flashing top. I went back to try the recovery of Seagate disk, and now it will not start either. I tried to remove the new HARD drive. with or without a cd in the player it displays the message "No Op sysytem found." SO I think that something touched the CDdrive. But it is interesting with the blinking cursor will restart the machine, then perhaps a part of the op system is loaded.

  It is an old machine, the old system of the op. I shopped Hp store and only Windows8 available now. SO I am forced either on the cutting edge with all new bugs and learning curve, or I'm trying to get this old lady will machine. Other things I've linked, hard reset, restore the default bios.

  Ideas that you may have will be appreciated.

  Hello

  The laptop is back running with the new hard drive, Yay! and a new cd player.

  Here's what he had to, for anyone who has ever has the same problem:

  The CD player was bad. The nearest local supplier on the list for assistance parts hp gave me was a suitable replacement. I installed, and the system restore disc started and ran immediately.  I decided to check and see if the windows install disc would go and restore the sytem since I thought that I had already restored the entire C: partition. He started, but did not find the hard drive. He gave an eror message that does no drive found.  I went to the hp system restore disc and running. It took several hours reformatted the drive (by removing everything I'd put) and rebooted several times. Eventually, he came with a windows desktop computer. This is the factory installed there are over 5 years old. I installed the Seagate backup software and running. He seemed to have more options running in windows he did directly from the boot cd. One of the options was to restore the MBR. I had to find out what it was, Master Boot Record. I thought that it should be restored. The full restoration of the backup process C: took another few hours, but he finished and gave a message of the operation successfully.

  Then I rebooted and got windows, connected and got my office logon screen as it was at the time of the backup. Success.

  In the future, I'll watch that restore MBR, maybe it's there, and I missed it the first time. I have a slight nagging worry that maybe something else caused both drives to fail almost at the same time. But I'm not going to fuss with it. I hope that the machine works well for a little longer.

  Thanks to those who have tried to help.

  Later,.

  Dyno

• My sound keeps inhibition by itself! Have you tried System Restore, but still was no use, guard passing! I have Windows XP.

  For no reason I known, my speaker in the toolbar at the bottom right keeps silent! I tried the system restore, but it happens again... more frequently! Help!

  Hello

  Check if you have a sticky on the keypad mute button.

  The sound will actually mode 'secret' or is it just cut out. You can tell if you have the sound icon in your system tray, you can see the red circle with a line through when her mute.

  If it's cut: the function of it cutting may be a physical problem. The system may not have enough juice to power the sound. Try playing the sound on a low volume. My other guess would be to update drivers and test.

  If the problem persists, reinstall the sound card drivers and check if that helps.

  Reference:

  http://support.Microsoft.com/kb/283658

• How to limit the amount of space drive that system restore uses

  original title: how to cut system restore in two points

  my hard drive is almost full.and I'm cutting the system restore in half of all aid

  Thank you ken

  You can remove all restore points by turning off the system.  but then I'll make a new restore point for today.

  Open Control Panel systems and on the System Restore tab, you can make adjustments to the functionality.

  is incidentally, deletion of restore points can be counterproductive because they really do take up that much space, and you might not have as a safety net restore points to restore your system.

  really, you should consider adding a second hard drive to your system because programs and Web pages are only more complex and bigger in size.  If you will not be able to escape the possible low disk space problem.

  either way, microsoft provides 25 GB of free space on this skydrive site, where you can download and store your personal files.

• XP sp 3 order restore system restore. Reports, not able to restore the (date) _

  recently installed program of care 3 Advanced System. clean registry, short cutting etc. with apparent problem. correlation? suggestions? I already "canceled" pre cleaned State .even no joy will not restore?  reload XP OS and start @ square one?

  System Restore didn't work before installation produce of the care system?

  Did you install a free or paid version of ASC?

  I suppose it does not really matter, but what problem have you requiring you to use the system restore or if you are just practical (it should still work).

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  Depending on what you use for malware protection, you will maybe disable the product temporarily, make the system restore and then turn on the product.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Stuck on black screen Vista system restore

  Hi my family Vista premium would not start normally so I tried to select a safe mode restore point. The chosen restoration was cut for more than 12 hours on a screen black now I didn't no what to do next please help?

  Hi LiLDrEaD,

  ·         You receive an error message?

  Follow the suggestions below for a possible solution:

   

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Perform system restore in Windows recovery environment.

  For more information, see the following article:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information helps.

• I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone

  I don't know what is happening, I did a system restore and it did not work, and all my icons and files I had on my monitor have gone

  Try this to rebuild icons: -.

  Open the command prompt as administrator and copy and paste each command and press ENTER after each command:-

  • Taskkill /IM explorer.exe/f
  • CD /d %userprofile%\AppData\Local
  • DEL /a IconCache.db
  • Shutdown /r

• ASUS laptop computer stuck on reboot screen after system restore

  Hello

  I did a system restore on my laptop and asked that it be returned to the State where he was 3-5 days ago.

  It was all going well until he came to turn it back on - it is now stuck on the screen to restart for almost 2 hours!

  I don't want to cut to the case that it damages, but I don't know how to get out of the reboot screen.

  Any help/advice would be much appreciated :)

  Hello

  This problem could occur if the system restore was not completed successfully.

  If the computer is blocked at the start screen, I suggest you to restart the computer and see if you can start the computer normally.

  If this isn't the case, I suggest you to perform auto repair from WinRE. Check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  (a) to Insert the media (USB or DVD) and restart the computer.

  (b) key press F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive that you inserted the installation media in.

  (c) once the Windows Setup window appears, follow these steps:

  (d) click Next , and then select fix your computer.

  (e) you will see a blue screen and a option to choose.

  (f) select the Troubleshooting option and select Advanced options.

  (g) you can choose automatic repair in Advanced startup . option

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Fact a system restore and you need to download firefox so that it can work, but now have lost all bookmarks, is it possible to get them back?

  A system restore to see if that could solve the problem with registration to Xbox games. It corrects this problem, but firefox would not work. So I downloaded again, but now lost all bookmarks. Is it possible to recover?

  Chas65 said

  I don't see the restore function.

  Hmm, when you are in the dialog box (Ctrl + Shift + b) library, you have the menu "import and backup"? Restoration is expected to be in this menu.

• Firefox Sync has restored after a mysterious Win8.1 'no - system restore' by ~ 1 month; addons lost and bookmarks in this period.

  Situation quite messy/weird here. I woke up this morning to find that my Win8.1 was reduced to a 1 month whose state of my Firefox Sync State. Bookmarks seemed to be updated but not the series of modules. I clicked the sync button in the hope it would refresh things on the last saved state to my e-mail last night, but he churned through and then my favorites, it was missing the last 1 month. I'm having problems with WIn8.1, too, that event viewer shows no system restore (and will not allow me even open the system restore) and event poster Viewer half a dozen updates Apps I never user as the only activity that happened during the night. Any ideas on wtf that happened here and how fix?

  xooxes said

  Situation quite messy/weird here. I woke up this morning to find that my Win8.1 was reduced to a 1 month whose state of my Firefox Sync State. Bookmarks seemed to be updated but not the series of modules. I clicked the sync button in the hope it would refresh things on the last saved state to my e-mail last night, but he churned through and then my favorites, it was missing the last 1 month. I'm having problems with WIn8.1, too, that event viewer shows no system restore (and will not allow me even open the system restore) and event poster Viewer half a dozen updates Apps I never user as the only activity that happened during the night. Any ideas on wtf that happened here and how fix?

  Moderator: Please close this issue; problem has been resolved. Sorry for the inconvenience.

• How can I find downloaded emails that disappeared after the system restore function?

  I restored Ubuntu 14.10 at an earlier date, but the previously downloaded emails since my online account after the restored date disappeared. Where can I find them? Data is backed up on a weekly basis.

  I have no idea, I suggest you to ask what you actually do on a forum of Ubuntu Linux. My guess is that you have completely replaced the files with the 'old', so the data are missing. Long experience which is anything "System Restore" or "system reset" will lead to nothing other than high blood pressure, gnashing of teeth and the loss data.

  If you happen to find a latest version of your profile files, the information here should help. https://support.Mozilla.org/en-us/KB/Profiles-TB#w_where-is-my-profile-storedUbuntu

• System Restore wiped out to my favorites

  Please help I just did a system restore and after it restored all my 50 or so bookmarks gone how do their back thanks to all in advance

  It is possible that the obtained profiles.ini restored an earlier version and you have switched to another profile or new profile has been created.
  If you had reset Firefox after the date of this restore then point it probably happened.

  See:

  • http://KB.mozillazine.org/Recovering_a_missing_profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • http://KB.mozillazine.org/Lost_bookmarks
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• I need to recover the Favorites after a Windows system restore.

  After doing a restore of windows on Windows 7 Pro, I have only the default bookmarks on my view your bookmarks"" button. In a backup of the system a few months ago, I got the files and folder Appdata Firefox Profiles. I tried to replace the new profiles of 'empty' to the former, but without success - I still have only the default bookmarks. Thanks in advance for your help.

  Note what to do a system restore will probably replace the profiles.ini file and all the profiles that are made after the date of restoration will not appear or be accessible through the Profile Manager.
  
  If profiles are still there, then you can use the Profile Manager to create a new profile and choose the location of an existing profile (choose a folder) of re - save profile.

  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_Manager