Cut during the system restore? now I get no picture just a black screen refresh

I used the system restore to fix my pc to a previous point, because I wanted a fresh reboot... Unfortunately it was closed somewhat during and now all I get is this threatening black screen that updates constantly. I don't have a recovery disc, it's a gateway DX4200.

Hey I fixed, it was the card must have fried or something...

Tags: Windows

Similar Questions

  • my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem
    Hello

    1. have you made changes on the computer recently?

    Method 1.
    Change hardware acceleration
    You can try to change the hardware acceleration in the middle and check (you can try another level too.)
    a. right click on a space empty on the desktop.
    b. go to the resolution of the screen.
    c. click Advanced settings, and then click the "troubleshooting."
    d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
     
     
    Method 2.
    a. you can also check that Windows is up-to-date to check updates for your hardware.
    You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
    http://support.Microsoft.com/GP/video_freezes_or_crashes
     
    b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
    You can also check out the article below which explains to update hardware drivers.

     
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After the removal of malicious software through the system restore, now some applications don't work

    Control Panel... Help and Support... do not work... I get this message on both of these and other:
    Rundll32.exe not found Application...
    When I try to access some also uses Open with open... This has not happened before... I think I lost something that needs to be restored... BTW I tried the system restore to get rid of malware... It worked (obvriously) but only up to a point... Now, some applications do not work...
     
    Thank you
     
    Elaine

    Then when you get your rundll32.exe work, follow these steps:

    Looks like your Windows file associations have to dispose. This means that XP is not
    know what to do with the files by looking at the file extension (for example, .exe for executables,
    .doc for MS documents, etc.).

    If you don't have it you, something done for you - most likely malware.

    Go to this site WWW by Doug Knox:

    http://www.dougknox.com/

    On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

    Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

    Run the following scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

  • I need to restore my windows xp system, but when I run the system restore program, I get the message that no changes were made and to choose another restore point, but all have the same results. Why?

    the system restore program is activated.

    A restore point is selected. program is activated.

    It runs and after system restart, it is said that no changes have been made, run another restore point.

    Same results every time!

    Help!

    Hi larryburrage,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3 do you have Norton installed on the computer security software?

    If you use Norton Security software on the computer then refer to the article below and check if it helps.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    If you don't use security software Norton then temporary deactivation of security software installed on the computer and check if it helps.

    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  • What is the next step after an unspecified error occurs during the system restore

    My computer shuts down saying windows has been shut down to avoid damage.

    disable or remove all equipment recently installed software.

    System Restore does not complete successfully.

    How can I find the dates various programs have been installed. I can find the programs, but not the date they were installed.

    The problem began in mid-September, so I would like to search by dates.

    I have dates for updates to windows, but not programs other than windows.

    Hello

    This can help you with problems with the system restore:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    2. try to use Safe Mode system restore.

    http://bertk.MVPs.org/html/restoresysv.html

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See you soon.

  • I just tried to download Vista SP1 on my count, he went through all the motions and now my computer is nothing but a black screen.

    Very angry about this, until I tried to install this pack, my computer was working perfectly. Now, it seems that my entire system has been destroyed, and when I try to contact Microsoft, it seems that I have to pay $72 Australian, just to get him to talk to me. Seems hardly fair, that their pack which crashed my system. Someone has an idea of what he must do to either restore my system (without the use of disks to restart), or is anyone know how I can contact Microsoft without paying (since this is not a problem on my side). Any suggestion would be appreciated.  Regarding what happened, he went through the entire process of installation of the service pack, but when he stopped for the last time, the computer starts with a very simple beeps and then nothing, no white screen, no warning, no prompt, nothing.

    Will need you the DVD

    How to uninstall Windows Vista service packs as a troubleshooting step
    http://support.Microsoft.com/kb/948537

    FYI learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    TaurArian [MVP] 2005-2010 - Update Services

  • No access to the system restored files even though I'm an administrator

    I recently had to restore my laptop to its factory settings. I have created a backup of my external hard drive and files on and crossed the System Restore Wizard to get it all back again.

    However, I now get an error message on all my files saying: ' you don't have permission to open this file. Contact the owner of the file or an administrator to obtain this authorization. »

    I am the administrator and when I search through all of the files properties 'total control' but I even can not open them.

    Any ideas?

    Please see how appropriating a file or a folder in Windows XP , which also applies to Windows Vista and Windows 7. Boulder computer Maven
    Most Microsoft Valuable Professional

  • How to switch on the system restore? Repeat me domain administrator contact

    I need to turn the system restore, but I get the message administrator contact field

    Hi pietbotha,

    1. is the computer connected to any domain environment?

    2. did you of recent changes on the computer?

    If the computer belongs to any domain environment, then you need to contact the network administrator for assistance.

    Try the steps below if the computer is not connected to any domain environment and check if it helps.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    (a) click Start, run and type regedit.exe, and then press enter

    (b) navigate to the following key:

    HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

    In the right pane:

    a. delete the value DisableConfig

    b. delete the value DisableSR

    c. exit the registry editor.

    d. restart.

    In Windows XP Professional, you can accomplish the above by using Group Policy Editor.

    (a) click Start, run and type GPEDIT. MSC

    (b) access this location:

    Computer configuration-> administrative templates-> system-> system restore

    (c) define disable unconfigured system restore

    (d) disable Configuration value not configured

    (e) to exit the Group Policy Editor

    (f) restart.

  • When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

    When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • A run the system restore, and now my Adobe Acrobat license has exceeded its limit

    I tried to restore computer because of a corrupted installation and it deleted Adobe Acrobat, since the system restore did not work, I have reinstalled the operating system, corrected and then installed Adobe Acrobat Professional of XI, entered my license and it comes up with amounts excesses of this license. I would just get the license reactivated. Any help would be appreciated. I tried to call and Adobe is closed on weekends, cat I tried but nobody came online in some time so now, try the forums as they are 24/7.

    Thank you-

    Jake

    You need to talk to Adobe, not users on the forums, because only Adobe can reactivate something on their end.   I guess the numbers increase during the work week.

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • How can I get my laptop in safe mode so I can use the system restore

    Could make Microsoft scanning and cleaning of the laptop. Now I can get on the internet, but all the files, photos etc do not appear. I arrived at the system restore, but it won't work. Want to try to restore in safe mode as suggested, but how do it in safe mode?

    Could make Microsoft scanning and cleaning of the laptop. Now I can get on the internet, but all the files, photos etc do not appear. I arrived at the system restore, but it won't work. Want to try to restore in safe mode as suggested, but how do it in safe mode?

    Safe mode is not likely to help, and system restore.

    Your user profile is probably damaged and that Windows has created a new profile for you.  If you are looking into 'My Documents' or 'My images', your old files won't be there - they are in the old profile.  Do a search for your files.  If you find them, you can copy the entire profile.  See http://support.microsoft.com/kb/811151

    Or you can simply copy the desired specific files/folders.  You may need to 'own' the files to gain access to their--> http://support.microsoft.com/kb/308421

  • XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

    Original title: XP hang up to the restoration of the system during the installation

    During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

    The message says:
    No changes have been made to your computer
    To choose another restore point, restart System Restore
    To restart System Restore, click Home
    The jury of the mouse and the button doesn't work so I can't click Home tab
    Help

    Hello

    Why you try to run the system restore?

    Step 1: Check if you are able to complete the restore of the system in safe mode.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

    For more information, please see the following article.

    Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

    http://support.Microsoft.com/kb/302796

  • The system restore failed. Error message (unspecified error occurred during restore).

    The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

    Nortonn, McAfee etc often stops system restore:

    http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

    Run more high tool ot remove all McAfee.

    1. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    2 Malware will stop at the system restore:

    If necessary, do all the work Safe Mode with network.

     

    To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • Get failure catastrophic error when running the system restore

    Original title: System Restore

    When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

    Anyone knoe what to do to fix?

    Thank you

    Maggie

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

    It will be useful.

Maybe you are looking for