System to monitor performance.

Similar Questions

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• When I right click on the shortcut icon, my screen begins to blink and I have to do a Ctl/Alt/Delete to return to display system and monitor to normal.

  * Original title: Steve M.

  I have My Documents on my Windows 7 desktop.  When I click the icon, an icon My Documents Shortcut.link then appears next to the My Documents icon.  When I right click on the shortcut icon, my screen started flickering and I mus do a Ctl/Alt/Delete to return to display system and monitor to normal.

  I tried to remove the My Documents icon, but who only 'pretending' in the file recycle.  Of course, I don't want to totally delete the My Documents!

  Any advice will be appreciated.

  Thank you.

  Although it is strange that the location of your documents is

  C:\Users\Steve\Doc

  Instead of

  C:\Users\Steve\Documents

  This result shows that the "My Documents" icon on your desktop is a shortcut and not the actual file with your documents.  The icon on your desktop has a blue arrow, like this:

  

  If you delete this icon, you should get a message like this:

  

  As long as the 'shortcut' word is in the message "Are you sure", everything you delete is a shortcut and not your actual files... so go ahead and delete it.  You can then create a new shortcut or just use the 'Documents' shortcut located on the start menu:

  

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• Error diagnostic system (resources and performance monitor) - conflict of property values

  Get error message "property a conflict of values" which attempt to run System Diagnostics.

  Looks like you may have a virus or other malware.  Try to start safe mode and run your anti-virus program to make a complete analysis of the system.  There are a number of suggestions along this line to the position of moderator of the forum Keith

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If none of this helps you run SFC/scannow from the command prompt in administrator mode.

  I hope this helps.  Good luck.

• Monitor performance and reliability of Vista not updated

  Hi all

  I have a HP Pavilion dv4 Vista SP2 machine is installed. From time to time, I check the performance and reliability of my machine monitor. Recently I discovered that reliability monitor has not been updated since 17/03/2012, while performance monitor is OK. I've used various methods to overcome this problem to delete the contents of the folders PublishedData and stateData evolution of their access permissions. However, no method has been of assistance. I also tested my memory with the Memory Diagnostic tool, and if all goes well no error has been detected.
  When I check the Task Scheduler RacAgent.exe, everything is OK and its State is mentioned as queued. But when I run it, nothing happens and the last Run result shows 0 x 0. Also when I run the command line RacAgent.exe nothing happens. I should mention that a few days ago the RacAgent.exe worked normally and the task manager has also shown its process for about 30 seconds and the field last result run the task scheduler has shown other useful addresses, but even at that time there, I had the same problem: reliability monitor not updated.
  I really need your help and I look forward to your itinerary
  Best regards

  Hey Amir,

  Thanks for asking! Looks like there could be possibly a corruption of system files or an infection. We will check by running the associated scans.

  The auditor of file system (CFS) scanner to check any file system corruption. Follow the article here.

  In addition, run Microsoft Safety Scanner to check any infections. Read this article for the same thing.

  I hope this helps! Don't answer that if they do not help, we can seek other options.

• Monitor performance of length diskqueue vm or vmhba

  Hi all

  I'm watching special GAVG, QAVG and LVAD for a virtual machine performance and a special vmhba.  With esxtop, I used the following:

  Control of the hba to an ESX connections:

  ESXTOP - & gt; Type "u" - that listed all my connections vmhba for this "

  ESX host.  However, I'm only interested in vmhba1:0:21, is there a way

  just watch that only?

  vmhba0:0:0 - 1 11 8 32 0 0 0 0 0.00 0.98 0.98 0.00 0.00 0.02

  vmhba1:0:1 - 3 7 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:10 - 3 16 2 32 0 0 0 0 0.00 0.20 0.20 0.00 0.00 0.00

  vmhba1:0:11 - 3 9 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:12 - 3 8 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:13 - 3 8 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:14 - 3 11 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:15 - 3 11 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:16 - 3 19 2 32 0 0 0 0 0.00 3.33 1.76 1.57 0.00 0.00

  vmhba1:0:17 - 3 9 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:18 - 3 9 1 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:19 - 3 7 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:2 - 3 12 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:20 - 3 7 2 32 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  vmhba1:0:21 - 3 14 2 32 0 0 0 0 0.00 0.00 1.96 1.96 0.01 0.00

  Monitor the performance of vm on an ESX:

  ESXTOP - & gt;  type 'v' - that listed all the virtual machine running on the ESX host.  Is there a way to see the performance of GAVG, QAVG and LVAD for a virtual computer in this list?

  ID GID NAME DEVICE NWD NDV DQLEN WQLEN ACTV QUED % CHARGE USD CMDS/s READINGS/WRITINGS/x MBREAD/s MBWRTN/s

  2 system 2-3-0 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  6 6 helper - 3-0 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  9 console 9 - 1-0 0 0 0 0 0.00 3.33 3.33 0.00 0.00 0.04

  22 22 vmware-vmkauthd-1-0 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  25 25 VM1 - 3-0 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

  27 27 VM2 - 3 0 0 0 0 0 0.00 0.00 1.57 1.57 0.00 0.00

  29 29 VM3 - 3 0 0 0 0 0 0.00 0.00 1.76 1.76 0.01 0.00

  Thanks in advance,

  Daniel

  OK, I checked and my memory was a little off.

  Press d to switch to the stats/disk storage,

  Press tiny e to expand/rollup storage stats, enter vmhbaxx (attention, typing have to start on a typing mistake)

  then lower case a to expand the channel type vmhbax:y, where x is your adapter you have entered the 1st command and there is your TV (usually zero)

  then enter lower case t to enter targer to develop vmhbax:y:z where XY: same as above and z = target ID (target ID column - the labels at the top of the columns are arranged in the order, you must enter.

  then enter l low case for name of the lun that you want to extend vmhbax:y:z:n where n is the number of LUNs (COVER for column label.

  In the example I have attached my last entry was vmhba1:0:0:2.    I've highlighted a virtual machine where I ran defrag display data

  Hope this helps

• All the drop down menus are broken in Firefox 5.01 on system dual monitor.

  My system specs...

  • Intel Core 2 Quad 9550 clocked at 3.2 GHz
  • 8 GB of OCZ DDR2 6400
  • PNY GTX 460SSC
  • 4 WD Caviar Black SATA HD is a total of 4 TB
  • Blu - ray LG burner
  • Plextor DVD burner
  • 1000W Corsair modular power supply
  • Corsair Obsidian 700 d case

  When Firefox is open on the second monitor (not the one designated as my primary monitor) and I try to open a drop-down list (including folders of bookmarks in the bookmarks bar, the menu options or in the menu bookmark) they twinkle and disappear, leaving the outline of the menu back and allow me to always select something from the menu. I have attached multiple links in the screenshot below.

  This happens every time, any monitor I appointed as my primary monitor. I made a new installation of Windows 7 (low first hard drive upgrade) (x 64), all my drivers by the Web sites of manufacturers and Windows Update, installed updated Firefox 5.0.1 with no Add-ons and it still happens. If I swap which monitor is my main, the problem follows the secondary monitor. I was running an ATI Radeon HD 4870 and suspected the map (because ATI blows and do not support one of their cards to Professional workstation that comes in my PC caught fire and has less than a year and a half old), so I went out and bought a new PNY GTX card 460SSC, downloaded the latest drivers and the problem persists. I have restored my video drivers in a full version (from v275.xxx to v274.xxx) and the problem persists. I also just discovered that the menus are corrupt in Add-ons too, namely FireFTP menus when you bring them down.

  Screenshot 1
  Screenshot 2
  Screenshot 3
  Screenshot 4

  The solution posted in fixed wire underneath it for me:

  "Tools > Options > general (tab) > advanced.

  Under navigation try disabling use hardware acceleration when available. "

  http://support.Mozilla.com/en-us/questions/779732

• System API Monitor

  I try to install the NISysMon API using the link OR system monitor download here the knowledge base article:

  http://digital.NI.com/public.nsf/allkb/C67D5C1D64E77E1D862575780060CFCF

  In the Readme I don't see CVI as an interface supported and when I load the driver, everything what is responsible is the side of LabView.

  I get no loaded NISysMon.h file.

  The installation charge nisysmon.h program?

  Should I try re - install?

  The installation program will automatically put in the .h, and .dll file.  My .h file is located in C:\Program NIUninstaller Instruments\Shared\ExternalCompilerSupport\C\include and my niSysMon.dll is located in C:\Windows\System32.

• The proposed system can not perform upward.

  I just bought this computer laptop dv6-3013nr. When I tried to make the proposed system until my 16 G flash drive, he stopped at half way through and now my icon for the only time back is gone and I have no return on my flash drive. How can I create a backup of the files system?

  There are many ways to save, "backup" is a generic term. Don't know what software you have invited to use.

  Here's one way to do this in Windows, this method makes a complete picture of the hard drive, it would be quite large, much more than 16 GB, it could be used for disaster recovery, if your hard drive fails. It backs up your operating system, software and personal data in its current state at the time that you perform the backup

  http://support.HP.com/us-en/document/c02053303

  There is also a Windows 'file' backup function, it backs up just your files, you can choose the files to back up.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  If you do not have your disks from HP recovery yet, I suggest you do the DVD's now.

  http://support.HP.com/us-en/document/c01867124

  You can learn more about HP Recovery here, it's different than a windows the first link Image.

  http://support.HP.com/us-en/document/c01895783

  Also do this Windows system repair disc

  http://support.HP.com/us-en/document/c02058933

  .

• SYSTEM OF MONITORING plug-ins FOR MICROSOFT SQL SERVER - cost of licenses

  Hello
  
  We have the license for Oracle 10 g OEM. We intend to implement plugin of SYSTEM MONITORING for
  MICROSOFT SQL SERVER. We must buy separate license for this Plugin.
  
  Ritesh

  On in the technology price list
  Look for "System Monitoring Plug-in for Non Oracle Databases"

• Recently upgraded to the new version of Firefox and after a Windows system restore was performed today Firefox is therefore more accessible (by clicking on icon Firefox results in nothing) what can I do?

  After System Restore Mozilla Firefox icon is still on the screen but now when I click on the Firefox icon does not open. I have a number of bookmarks saved I'd perfer not to lose - is there anyway I can restore Firefox without losing bookmarks?

  Using the system restore can cause your installation of Firefox get corrupted because not all files are restored, so be careful to do a system restore.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• a6040n desktop system - two monitors

  I would like to install a graphics card dual monitor to HP Pavilion a6040n desktop.  Does anyone have a recommendation?  I tried a quality mid-range card, but it did not work (changed the bios to use PCI_E and disabled the embedded video.  Any suggestions or directions would be appreciated.

  DSLFAN, welcome to the forum.

  The main problem you'll have is the power of the power supply unit (PSU).  It does not say in the specs, but I think it will be 250W or 300W.  If so, it is not enough power for a good mid-level video card that supports two monitors.  I normally recommend at least 500W to 550W.  That's enough to allow future improvements as well.  The main reason is that gives you more choices of cards.  When you install the video card, the embedded video should be disabled automatically.  It is not available when a card is installed.

  I like XFX, BFG, EVGA, Sapphire and PNY in that order.  You should stay less than 9 "long.  This ensures the card to insert in space without problems.  At this point, my preference is the AMD/ATI cards.  They have their Catalyst Control Center Suite that allows you to control the speed of the fan and overclock the card if you wish.  Don't forget, more speed equals more heat.  The map in the link I provided is a good example of what you need.  It does not have the power, but it will be at least 400W.  Read the reviews to see what they have to say.

  If your problem is solved, please click "accept as a Solution.

• can super cookies listed in its properties as an MS-DOS program to store in a vista system recovery partition and stay an MS-DOS program if a system recovery is performed

  I may have a great cookie in the folder my documents of the website dove.us.  I have a HP

  Windows Vista Home Premium 32-bit operating system with dual core processor.  I have

  want to use HP System Recovery, but I'm afraid that the cookie super (in

  Properties it says it's a 500 bytes MS-DOS program) would not get completely erased

  from my pc.

  Hello

  The recovery of the system takes your computer to a State where you will have just the factory settings and nothing more. In other words, that it will also format the computer in this process.

  So, I'm sure that the cookie will be effacΘ when you do a full system restore. You can check the items below which talks about backup and restore. I also suggest you make a backup of data you want to keep for the future and to restore once you reinstall the operating system.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Backup and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  How to back up files and recover data
  http://www.Microsoft.com/athome/Setup/backupdata.aspx#fBid=V9sr8pwYVUb

  I hope this information helps you!

• IP address of the source system in monitoring SOA

  Hello

  I want to make a list of witnesses where all source IP addresses will be there who ever called my services to soa server.

  Is there any soa server log that allows to capture such data.

  I am using soa 11g.

  Thanks in advance

  Well,.

  It depends what endpoints of service for "monitor." If you want to only capture incoming requests to the HTTP binding, you can use the access.log soa_server1/logs folder in your domain record. If you have SST as reverse proxy, use the web server access history.

  HTH,

  A.