Error diagnostic system (resources and performance monitor) - conflict of property values
Get error message "property a conflict of values" which attempt to run System Diagnostics.
Looks like you may have a virus or other malware. Try to start safe mode and run your anti-virus program to make a complete analysis of the system. There are a number of suggestions along this line to the position of moderator of the forum Keith
If none of this helps you run SFC/scannow from the command prompt in administrator mode.
I hope this helps. Good luck.
Tags: Windows
Similar Questions
-
Reliability and performance monitor
I use a Vista Home Premium based computer laptop HP.
I find that I can access is no longer the reliability and performance monitor. When I try to access the report, I get the following message to come. Error: An error occurred trying to generate this report. The interface is unknown.
I searched the internet, but have not been able to find a solution.
I use a Vista Home Premium based computer laptop HP.
I find that I can access is no longer the reliability and performance monitor. When I try to access the report, I get the following message to come. Error: An error occurred trying to generate this report. The interface is unknown.
I searched the internet, but have not been able to find a solution.
I know how to solve this problem
Try this:
go to the reliability and performance monitor, then in the section reports on the left, click system diagnostics then delete all generated reports (click on each and then delete) in there, then try to generate the new report.
the reason for this error is that you have canceled or closed the report while he produced it!
I hope this helps!
-
When starting my computer (Dell laptop) Vista, it asks to install the Broadcom Ethernet driver. I click "locate and install driver software" and it returns the error:
Install the driver error: "insufficient system resources exist to complete the requested service."How can I fix?
Hello
· What antivirus software or security is installed on your computer?
· Did you recently change on computers such as installing any application?
Step 1:
Temporarily try to disable the antivirus on the computer program and check if the problem persists.
Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Step 2:
I also suggest you to download the drivers from the Dell website and check if it helps.
-
Hello
OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallationI had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed. First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.My PC specs:AMD Athlon (TM) II X 2 2452.95 GHz, 3.25 GB of RAMWindows XP Professional version 2002Service Pack3Thanks in advance.concerninggasT-Link support tried it yet? http://www.TP-link.com/en/support/contact/
-
critical error after system restore and windows updates
I cleaned up my old computer and did a system restore. Subsequently, I have install windows to perform automatic updates. The computer detected 37 windows updates and install them. After a successful windows install update, the computer said I had to reboot so I did. Now the computer tries to start but then comes a blue screen with a bunch of text and then said: critical error. I tried to do a system restore, and when I get to the part, he begins to restore and gets to 13% and then says critical error and I have tried to try again, but nothing happens. Stuck... Please advise.
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a repair system restore / boot:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
I get this error message when you try to install the driver 'Remote NDIS based Internet Sharing Device' Microsoft allowing me to attach my cell phone. This driver installs normally automatically whenever I attach my phone to a computer windows 7 via USB and enable tethering. I did several times with success on other systems, as well as one currently give this error. I tried the registry setting:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"PagedPoolSize" = DWORD
"PoolUsageMaximum' = dword:0000003 cAs suggested in another article about this error message on a XP machine without success.
Currently expanded memory: 179 Non paged: 84
Any help would be appreciated.
I also had this problem for awhile now and have been unable attach despite trying your suggested corrections.
Could you clarify what the error code 5aa means exactly? I get this error code when getting the "Insufficient resources" error when trying to install/upgrade my Motorola Network Interface driver, but the same error code appeared recently when I tried to install the latest version of my application of attachment, which gave me the same error code even if instead of "insufficient system resources exist to complete the requested service." , it was in response to'UpdateDriverForPlugAndPlayDevices err is 5aa'.I could only solve this problem by installing an older version. I think to understand it this error code would better identify the source of this problem. -
Summary of resources and Performance empty data?
Hi guys,.
I have recently implemented a new host, G9 DL380 running ESX 5.1, 5.1 VSphere which showed already performance data in summary/resources and graphics in the performance section, but in the last two weeks, I noticed his is no longer showing any settings at all.
I did some reading, some say to reboot the host, but I can't afford any downtime with this to be honest. In addition, others have said to check the time that this can cause problems, the system time is fine, but ILO time is an hour out there, but I didn't think it would affect it?
Anyone would be able to shed light on why its happening? as I said, it worked very well, but obviously not. I'm a very new starter to VMware, so if someone could let me know laymans in terms, that would be great.
Hope to hear from someone soon
See you soon
Paul
So he did not solve your problem?
-
Reliablity and performance monitor is empty
I was just playing on Vista, now that I finally got and decided to launch the performance and reliability monitor to see why my computer was using up to 1.6 GB of RAM at idle. Not that she really bothers me or hurts my performance of the computer (after x 64 windows and 6 GB of RAM), but after opening it, I was a little confused because nothing was actually happening. I went to the monitor tab, you press start, but who have done nothing. I also tried to pass through the computer management program, but the same exact results. The work of monitors of reliability and performance, but the main screen, which shows the performance used by individual programs won't give me empty graphs, of the options and outcomes - although lack of. Any help would be great.
This is just a screenshot of what happens:
http://i562.Photobucket.com/albums/SS68/ThuggyWuggy/NewBitmapImage.jpgWell, I did everything what should have made the monitor, at least, I don't think that I did... the only thing that I changed the activation cool no silent mode for my CPU on my motherboard options, so I would not use too be able to leave my computer on all night. The monitor now works... If it stops working again, I'll post, but that seems to have been the cause. (?) It seems weird to have solved anything, but w/e... I do not know... I don't understand. I'll leave it is open for a day to make sure that it is the question. If this is the problem my motherboard is a version of Platinum bios msi k9a2 1.4, so others know how to solve this problem.
-
Under above: to Win32_PnPEntity.DeviceID="Root\\Legacy_ (here 30 different names of devices or software corresponding names such as HTTP, ELRAWDISK, DXGKRNL, CRDISK, CLFS, AFD, KSECDD, LLTDIO, MOUNTMGR,... and others) followed by two backslashes after each name following the above endpoint and the underscore, then 0000
It is this indicating I did not currently the afformentioned device currently installed in an internall or the outside slot, and thus the device/componet or software, that these elements are related is noted as "degraded state? This part of the report refers to a device or a pice of software? A device driver or utility?
Thanks in advance everyone or Sir/Madam.
I use a dell xps 630i, with vista 64-bit running to me excellent.
Hi ThomasArney Jr,
This can happen due to a hard drive which is a failure. You can try to run a Checkdsk and check if it helps.
Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.
Check your hard drive for errors
Hope this information is useful.
-
Pavilion dm4: error diagnostic system
After many failures to upgrade to windows 7 Home premium 64 - bit for windows 10, I decided to do a clen install of windows 10. While the system is running once the initialization is complete, but the startup takes almost an hour to finish. I tried to do a system to diagnose when starting, I get the message (9LLDU4 - 55985 L-XD6U3G-60QJ03).
you have an idea on what is happening on
Thanks for your help
Hello
You are welcome
Your laptop is considered as coming with a 320 GB hard drive, but you can install just as easily a 500 GB or 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.
The procedure to replace the hard drive begins on Page 61 of your maintenance & Service Guide.
Kind regards
DP - K
-
Windows XP insufficient system resources
Hello
Recently my company computer bit is facing error "insufficient system resources exist to complete the requested service" on and outside, since mid Nov 2009. This happen when the user opens a number of excel (with link & macro), Lotus Notes & internet exeplorer 6. When this error occurs, the user are anable to open a network share, new program (e.g., word). A new program can be opened only if the other program is close and it not much (5 ~ 6 Excel, 1 lotus notes apps & 2 ~ 3 IE). seems there reach max what ever.
Memory (2 GB), paging (3 GB), disk space & CPU's been tick. use of resources see available memory (800 MB free), paging (2.5 GB free), space (5 GB free) disk & CPU avarage is 5 ~ 10% of usage.
try using the Explorer from sysinternal processor but fail because the sub-sub-screen/popup windows launch when this happen. check with the patch from microsoft update for patch to deploy these last. no chance to find one is reporting similar question to my problem (see list below)
Troubleshooting any suggestion is welcome
Office hotfix
KB973705
KB974554
KB975958
KB973475
KB975051
KB978551Fix for Windows
KB975467
KB954155
KB969059
KB973525
KB974112
KB958869
KB971513
KB974455
KB974571
KB975025
KB971486
KB969947
KB976749
KB976098-v2
KB973687
KB961503
KB973904
KB974318
KB974392
KB955759
KB972270
KB970430
KB971737
KB976325Hi budget, I tested with registry edit below seem to work with all the patch apply. (from http://support.microsoft.com/kb/935649)
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"PagedPoolSize" = DWORD
"PoolUsageMaximum' = dword:0000003 c -
Different editions of windows consume system resources differently?
Different editions of windows consume system resources differently? For example, a Windows 7 Ultimate will consume more space than a Windows 7 Home Premium?
Hi Sameer,
Yes, there will be difference in the use of system resources and space between Windows 7 ultimate and Windows 7 Home Premium.
For more information, see the links.
Ways to improve your computer's performance
If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.
-
_ "Boot Performance Monitoring" and "stop Performance Monitoring. __
I just looked to the top of the page "Event Viewer" and discovered 1 791 itemsmarked as 'endangered', 'Critical', 'Error', etc, etc, etc.!
They seem to be linked to "Boot Performance Monitoring" and "Stop Performance Monitoring", etc., etc., etc..!
How can I fix all of these issues, please?
I have a little trouble with my home computer private.
Whenever I turn on my PC, it takes a long time to start (is that what you call "Booting"?).
Also, when I want to turn my PC off, it takes a long time to close.
I tried a few computer maintenance such as: -.
CLEANING DISC,
THE FRAGMENTATION OF THE DISK,etc.,.
but they have not alleviated the problems at all.
Can someone help me with this please?
Any assistance, information, suggestions, etc. would be greatly appreciated.
Thanks !
Alan MerringtonE-mail address is removed from the privacy *.Hello
Normally how long will it take to start a power off of the State? How long does take for
Stop for a shutdown of the State?Use this simple free utility to read these events and it makes it easier to paste them into one
message here. Do these after the SFC and CheckDisk as below.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html==========================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================================
Keep these practice to check possible error messages if they return.
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP)MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Tried to do a Windows Update and received the error message
Windows Update 8007000 b errorI tried the solution proposed in the windows of the promp command of the Administrators account
true fsutil resource setautoreset C:\
and received the error message.Error: The system cannot find the specified file.
What now?
Problem disappeared.
I downloaded two no microsoft updates and restarted my computer. Then, I downloaded the updates from microsoft that now installed successfully.
-
I did a system restore, and I went to do my updates, but this error occurs, could someone please?
[Error number: 0x8024400A]
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
Hello
1. don't you make changes on the computer before the show?
2. what Windows update you are trying to install?Method 1:
You can run the fix it and check.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2:
Perform a clean boot and try to update windows and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Method 3:
You can also try the steps in the supplied knowledge base article and check.You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
http://support.Microsoft.com/kb/943144Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://support.Microsoft.com/kb/322756Method 4:
You can also follow the article mentioned below to resolve the error: 0x8024400A.
Maybe you are looking for
-
I have double, triple checked to the script, and I can't find the errors.The only thing I might be unsure of is the site I list. I tried https://www.webmail.???.com and I tried https://www.???.com. It's a secure site? Help
-
Impossible to re - download OSX mountain lion,.
Impossible to re - download OSX Mountain Lion. In my purchases in the app store, the app button install OSX ML said "downloaded" and is grayed out. my other OSX install apps such as the Mavericks, Yosemite etc. are all available to download in new bu
-
Message "Please disable software virtual drive and emulation.
I just installed Indiana Jones Lego, but when I try to start, I get the message "Please deactivate virtual drive and a software emulation." I turned off of Daemon tools, but there is no change in the message. I use XP if that makes a difference. Any
-
I noticed some people have multiple WGA600Ns attached to different devices on their network. How are you doing this, depending on their configuration. I have a WGA600N and I can manipulate via my web browser in terms of changing the settings. If I
-
problem with the laptop,
laptop fell off couch upstairs. When you turn on it says PXE - E61 media test check the cable failure System operpating from PXE - MOF pxe rom not found laptop is a medion akoya. Thank you