System update fails to download updates

Similar Questions

• ThinkVantage System Update 3.14.0031 failure

  T400.  Vista

  SU ran and received notice message "your copy of SU must be updated.  When I click OK, the download tries to start, but immediately get the error box "the system has failed to download.  Make sure you have an active network connection.

  Close.
  Message box next "SU failed to install.  You can also install the lenovo.com/support. »

  I downloaded the update of the 3.14.0031 system and installed.  Rebooted and ran to get the same result as above.

  Edit: Same problem on another computer running XP.  Must be a problem with lenovo.

  
  

• Failing to download the system update readiness tool

  Separated from this thread.

  Hi, I tried to download the system update readiness tool, but happens to end with

  Gateway Timeout

  The proxy server has not received a quick response from the upstream server.

  Reference #1.a7643e17.1459430176.e41259

  or similar on both the 64-bit Windows 7 machine that I am trying hard and machine controlled work Windows 8 that certainly shouldn't be malicious software.

  Best regards, Michael.

  Thanks Gerry, I went through a couple more cycles of running the tool for troubleshooting Windows Update and reboot.  Ithen left to 'check updates' during the night and in the morning he had downloaded and installed the missing updates.  I don't know if there was a more general problem with Microsoft's servers yesterday or if it's just that I was too impatient for something to happen, but I'm now safely on Windows 10.  Thanks for your interest.  Best regards, Michael.

• Install before SP2 system update readiness tool - KB973540 failed code 80073712

  I want to install Service Pack 2 and get the answer I need to install the update for Vista 32 system preparation tools before installing SP2.

  When you perform on Vista 32 system update readiness tool - I get notice of low load failed with code KB973540 failing 80073712.  This error code description say "ERROR SXS CORRUPT COMPONENT STORE - the component store is in an unstable state".

  I used the article knowledge base Microsoft support using the method 1 and 2 to fix this, I always get failed code 80073712.

  I closed all programs and I checked my list of blocked programs before trying to download, still no download and even failed code 80073712.

  On method 3 is where I need to reinstall Vista.  I'd rather not do this because of the penalty to restore all my files and programs.  It would take me weeks restore all these files, I have 24 websites with different settings and many files on each.  Is there an easier way to fix my problem of code failed or an easy way to restore my programs and files?

  Lee

  I have McAfee (a 3 pack) on all our computers...

  Try this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  TIP: Before you step #3, see if you can download/install KB947821 manually-online http://support.microsoft.com/kb/947821 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 6 security updates failed to download several times

  Updates (6) security of Windows 7 have failed to download several times.

  No error code is displayed. The bar graph just turns.

  Hello Robert,.

  We will begin to help you resolve your concerns with regard to the installation of Windows Update. You mentioned that there is no error detected when it fails to install the updates, we recommend that you run the Windows Update Troubleshooter on this link. This tool will solve your problem.

  If the problem persists we suggest using System Update Readiness Tool.

  Let us know how it goes.

  Kind regards.

• Updates for 32-bit system continually fail

  Original title: update windows 32 bit dor

  updates for 32-bit system continually fail.  My system is 64-bit

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Adobe RUM and CC2015 last updated... Failed to download

  From the recent version of Adobe updates (last week), I now see the following error message when you use remoteupdatemanager to update the CC apps.

  RemoteUpdateManager version is: 1.9.5.25 (BuildVersion: 1.9.5;) Brand: Thursday, May 26, 2016 10:30:28)

  From the RemoteUpdateManager...

  Following updates apply to the system:

  (ACR/9.6.1.147/osx10-64)

  (AEFT/13.8.1.38/osx10-64)

  (AME/10.4.0.26/osx10-64)

  (AUDT/9.2.1.19/osx10-64)

  (MUSE/2015.2.1.21/osx10-64)

  (PPRO/10.4.0.30/osx10-64)

  (PRLD/5.0.1.20/osx10-64)

  **************************************************

  Following updates are downloaded:

  (ACR/9.6.1.147/osx10-64)

  (AEFT/13.8.1.38/osx10-64)

  (AME/10.4.0.26/osx10-64)

  (AUDT/9.2.1.19/osx10-64)

  (MUSE/2015.2.1.21/osx10-64)

  (PPRO/10.4.0.30/osx10-64)

  (PRLD/5.0.1.20/osx10-64)

  **************************************************

  Download (ACR/9.6.1.147/osx10-64)...

  Downloaded successfully (ACR/9.6.1.147/osx10-64)...

  Download (AEFT/13.8.1.38/osx10-64)...

  Unable to download (AEFT/13.8.1.38/osx10-64)...

  Download (AME/10.4.0.26/osx10-64)...

  Unable to download (AME/10.4.0.26/osx10-64)...

  Download (AUDT/9.2.1.19/osx10-64)...

  Unable to download (AUDT/9.2.1.19/osx10-64)...

  Download (MUSE/2015.2.1.21/osx10-64)...

  Unable to download (MUSE/2015.2.1.21/osx10-64)...

  Download (PPRO/10.4.0.30/osx10-64)...

  Unable to download (PPRO/10.4.0.30/osx10-64)...

  Download (PRLD/5.0.1.20/osx10-64)...

  Unable to download (PRLD/5.0.1.20/osx10-64)...

  Some updates failed to download...

  **************************************************

  Installation (ACR/9.6.1.147/osx10-64)...

  Installed successfully (ACR/9.6.1.147/osx10-64)...

  All the updates installed successfully...

  **************************************************

  After the updates failed to download:

  (AEFT/13.8.0/13.8.1/osx10-64)

  (AME/10.3.0/10.4.0/osx10-64)

  (AUDT/9.2.0/9.2.1/osx10-64)

  (MUSE/2015.2.0/2015.2.1/osx10-64)

  (PPRO/10.3.0/10.4.0/osx10-64)

  (PRLD/5.0.0/5.0.1/osx10-64)

  **************************************************

  Following updates have been installed successfully:

  (ACR/9.6/9.6.1/osx10-64)

  **************************************************

  RemoteUpdateManager out with the return Code (2)

  I see that Adobe changed the naming convention of their files to update, by now shorten applications (complete application prior name) and I was wondering if this could be the root of the problem. FWIW - I use direct download server from Adobe to update, not an internal update server.

  Y at - it an update to the version of RUM? I tried to use Packer cloud creative to see if there was a new version (which is not that I could tell).

  I also asked to our admin PC check and see if they saw the same issue (which they are).

  Please advise...

  Just FYI RUM has now been updated to v. 1.9.6.17

  I also saw the same questions, until I updated to the latest version.

  You can download the latest version in your Enterprise Console > deployment > creative cloud

  I also noticed that the CC Packer does not build in this latest version (yet).

• The ThinkVantage System update cause video to fail again T61

  It is a sporadic problem and can't just to the probably of the machines from 1 to 10, but it happens nonetheless. I was imaging a significant amout of T61, and part of the cleaning is to run the Thinkvantage system update utility. Updates only I have installed are up-to-date XP, ann RL/updates to update and the update of the BIOS. The last time I ran the updates on a machine, they are ones I installed:

  -Updated Help Center

  -Q934205 XP

  -Q910728 XP

  -Q917332 XP

  -Q941880 XP

  -Q918837 XP

  -Q889816 XP

  -Q923293 XP

  -Intel LAN 11abgn, abg, bg, for Windows 2000/XP

  -Intel Pro/1000 Lan

  -Updated the Director presentation

  -Features video Thinkpad

  -Update the BIOS

  -Adobe Flash Update

  On some machines, when I run updates and reboot, the video breaks down and I have to enter safe mode, back the video driver, then out to the Lenovo downloads and download the latest video and it works. Strange, huh? I do not always install the video features of Thinkpad, I just did on the last machine I've updated to try to recreate the issue, but have not yet been successful. I'll try the MS KB but thought I would try to post everything here first and see if everyone is seen/had this problem.

  Let me know if you need more information

  Thank you

  -Tyler

  Correction of the problem. I don't know how many people this would apply to the. I was setup machine to another when the question that's happened, but I copied the updates until I installed them. I installed 3 (Q923293, Q934205 and Q941880) and reboot, the video has failed. I looked at the edits, and Q941880 was the only one who had to do with the video. I restored on installed upgrading until (Q934205, I think) and viola! It worked. So, if anyone has this problem, he could have to patch XP-Q941880, so either roll back to before installation, or restore your video driver and install the last being directly from Lenovo.com.

  See you soon

  -Tyler

• Why am I getting SHAREit ver1.0.38.379 from the download page, but ver2.1.4.0 of the Lenovo system update?

  I would use SHAREit app on my T420(MTM: 4177Q7U) Win7 32 bit PC but not install it again. Then I ran Lenovo System Update to check for updates. He scored a single pack of SHAREit 2.1.4.0. I ignored him.

  Then, I accessed the Lenovo homepage (see link below) and downloaded an application of SHAREit. Installed and found the version ID '1.0.38.379 '.
  http://shop.Lenovo.com/us/en/accessories/software/apps/?menu-ID=lenovo_apps

  I'm a little confused and surprised. Why Lenovo provided different versions of SHAREit since the home page and to download Lenovo system update?
  Where should I get the updated version of official release SHAREit for my Windows PC?

  Thank you!

  You will always find the latest version of SHAREit link below:

  Download SHAREit for Windows, Android, and iOS.

• Updates fail to download using Windows Update

  I am running Windows XP Professional Sp3 and when you use Windows Update its identifies I need 88 critical updates. I confirm that I am reuqire to install but they constantly fail to download.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on this machine?

  3. do you have a Norton or a trial of free McAfee come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows 7 x 64-based Systems (KB2345886) fails

  Update for Windows 7 x 64-based Systems (KB2345886) fails everytime. I have restarted my computer several times now. Whenever I do, update indicates "Failure configuration Windows updates" and I have to restart again. Whenever I am able to log in again, it says that I have to restart my computer to perform updates. Once I've done this several times now. What's wrong? What must I do to fix this?

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista SP2 fails to load with code K8948465 8007000D. Tool system update fails to load, too

  Have recently upgraded to Vista 32-bit SP1. As an administrator, I tried to get Windows updates and everything seemed up-to-date except SP2.  Where is the code of K8948465 8007000D. I then followed the troubleshooting advice found here and research online, saying to download and run the system update tool. I saved my PC OK but he is unable to complete the installation sequence and it's there in "installation" of State. I temporarily disabled McAfee. No help.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows updates fail to download

  I have a dell optiplex 760 running windows xp 32-bit.  I just reimagee this machine.  When I go to windows updates all of them fail to download.  I've renamed the distribution of software in C:\Windows folder, but that did not help.  Any suggestions?

  Thanks for the reply.  All have the error code 0 x 80070002

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• Where can I download ThinkVantage System Update

  Hello

  I need to re - install the ThinkVantage System update. I couldn't find it to lenovo support & download page. Can someone send me the link to the page where I can download it?

  System: SL500, Windows Vista Business (32-bit), SP1 installed

  Thank you!

  Pete

  C:\SWTOOLS\APPS\tvsu

• Vantage system update think 5.06 fails to install

  When I tried to run 5.06 TVSU I got an error message at 10% of the scanning process, which TVSU could not complete the process of scanning to see if there were updates available.  After many attempts to find the updates, I uninstalled TVSU 5.06 thinking that he may be damaged.  Then I downloaded TVSU 5.06 and proceeded again to install TVSU.  After crossing the guests received the following message is displayed:

  "(Installation) Wizard was interrupted before system update Lenovo could be completely installed."  Your system has not been changed, to install this program at a later time, please run the installation again'

  How can I get my TVSU re installed and cross the above error message?

  Help would be greatly appreciated.

  Thank you

  Altoid666

  After many emails back and forth with Sclexman, I was able to get reinstalled TVSU and works correctly.

  Lenovo community is very lucky to have Sclexman as a member.

  Thank you.