System32. problems

I can't use the icons in the control panel. When I try to click on one of them I get a pop up message saying "Windows cannot find H\WINDOWS\system32\rundll32.exe".

The dual of the computer starts?

What is drive H?

Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

Tags: Windows

Similar Questions

  • While trying to install Zone Alarm, I got a problem of uninstalling 32 encountered error could not find c:\windows\system32\vsutil.dll, install error # 127

    While tring to install zone alarm error message uninstaller 32 met problemcould, I received not find c:\windows\system32\vsutil.dll must close this happened during the configuration after installation error # 127 {2abf85a 2abf792 2abf856} program za installed on the other 2 computers very well I think it's a problem with this computer windows

    Original title: help please

    Support for contact Zone Alarm. It's their product.

  • system32\configuration\system or corrupted - boot problem

    I have a laptop, Inspiron 1525, with XP Home Edition.  I keept is message read, "" Windows didn't start because the folloing file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "I tried the repair process, the F8 key, including" last good configuration, all to no known use.  Help, please

    Hello dutcchess
    I just down loaded this how to from microsoft

    When you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:

    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE
    Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing
    System error: Lsass.exe
    When you try to update a password the return status indicates that the value provided as the current password is not correct.

    Guided Help to recover a corrupted registry that prevents Windows XP startup

    Guided Help is available to help recover a corrupted registry that prevents Windows XP startup. Guided Help can automatically perform the steps for you.

    Actions running this guided help can be undone after Guided Help is complete. To undo the actions running this Guided Help to restore corrupted registry files, start the Recovery Console, and then manually copy the Windows\Tmp\*.bak files in the Windows\System32\Config folder. Be sure to rename the files to remove the .bak extension.

    For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base:

    915092 (http://support.microsoft.com/kb/915092/) Description of guided help for Microsoft Knowledge Base articles

    Requirements to install and to use this guided help

    • You must be logged to Windows using an administrator account to install and to use this guided help.
    • You must run Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help.

    You must first download Guided Help. To start, click on the following link:

    (http://support.microsoft.com/kb/307545/)

    Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

    The full, first part, follow these steps:

    1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.

    Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  • When the "Welcome" screen appears, press R to start the Recovery Console.
  • If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  • When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  • At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
    MD tmp
    copy c:\windows\system32\config\system c:\windows\tmp\system.bak
    copy c:\windows\system32\config\software c:\windows\tmp\software.bak
    Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
    copy c:\windows\system32\config\security c:\windows\tmp\security.bak
    copy c:\windows\system32\config\default c:\windows\tmp\default.bak

    delete c:\windows\system32\config\system
    delete c:\windows\system32\config\software
    Delete c:\windows\system32\config\sam
    delete c:\windows\system32\config\security
    Delete c:\windows\system32\config\default

    Copy c:\windows\repair\system c:\windows\system32\config\system
    copy c:\windows\repair\software c:\windows\system32\config\software
    copy c:\windows\repair\sam c:\windows\system32\config\sam
    Copy c:\windows\repair\security c:\windows\system32\config\security
    Copy c:\windows\repair\default c:\windows\system32\config\default

  • Type exit to quit the Recovery Console. Your computer will restart.

    • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    batch regcopy1.txt

    With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

    Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

    1. Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
    2. Press the F8 key.

      On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

    3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
    4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

    In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

    1. Start Windows Explorer.
    2. On the Tools menu, click folder options.
    3. Click the view tab.
    4. Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
    5. When appears in the dialog box confirming that you want to display these files, click Yes .
    6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
    7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

      Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

      Note You may receive the following error message:

      C:\System Volume Information is not accessible. Access is denied.

      If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

      309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
    8. Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RP x under this folder." Here are the restore points.
    9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
      C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
    10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
    11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

    These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

    The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

    The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

    Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

    309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

    Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

    1. Start the Recovery Console.
    2. At the command prompt, type the following lines, pressing ENTER after you type each line:
      del c:\windows\system32\config\sam

      del c:\windows\system32\config\security

      del c:\windows\system32\config\software

      del c:\windows\system32\config\default

      del c:\windows\system32\config\system

      copy c:\windows\tmp\software c:\windows\system32\config\software

      copy c:\windows\tmp\system c:\windows\system32\config\system

    copy c:\windows\tmp\sam c:\windows\system32\config\sam

    Copy c:\windows\tmp\security c:\windows\system32\config\security

    Copy c:\windows\tmp\default c:\windows\system32\config\default

    Note Some of these command lines may be wrapped for readability.

  • Type exit to quit the Recovery Console. Restart the computer.

    • Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

    If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

    regcopy2.txt batch

    Fourth part

    1. Click Startand then click all programs.
    2. Click on Accessories, then System Tools.
    3. Click System Restore, and then click restore to a previous RestorePoint.

    REFERENCES

    For more information about using the Recovery Console, click the n in the following article...
    For more information about using the Recovery Console, click the numbers below to view the articles in the Microsoft Knowledge Base:

    307654 (http://support.microsoft.com/kb/307654/) how to install and use the Recovery Console in Windows XP
    216417 (http://support.microsoft.com/kb/216417/) how to install the Windows Recovery Console
    240831 (http://support.microsoft.com/kb/240831/) how to copy files from the recovery on removable media Console
    314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

    For more information about system restore, click on the numbers below to view the articles in the Microsoft Knowledge Base:

    306084 (http://support.microsoft.com/kb/306084/) how to restore the operating system to a previous state in Windows XP
    261716 (http://support.microsoft.com/kb/261716/) System Restore removes files during a restore procedure

    For more information about the three likely causes of registry corruption and how to isolate, click on the number below to view the article in the Microsoft Knowledge Base:

    822705 (http://support.microsoft.com/kb/822705/) for advanced users registry troubleshooting steps
    • Microsoft Windows XP Home Edition
    • Microsoft Windows XP Professional
    • Microsoft Windows XP Tablet PC Edition
    • Microsoft Windows XP Media Center Edition

    If this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

  • IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

    Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

    -IDT Audio system tray app has encountered a problem - sttray.exe and

    -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

    I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

    Thank you

    Dennis Holmquist

    Hi Dennis,

    DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

    Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

    To connect a printer directly to your computer

    Remove a printer

    See also:

    Microsoft Windows XP - add a printer attached to your computer

    RUNDLL error message

    For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

  • Problem loading c:\windows\system32\NvMcTray.dll

    When I connect my account these two pop-up windows.
    C:\windows\system32\NvCpl.dll and c:\windows\system32\NvMcTray.dll loading problem
    I scanned the computer with pc max speed. But when I press the fix all button program incounters an issue and stops?
    The program is only a limited trial and not paid.
    Hope you can help.
    Thank you.
    Steve

    I can't comment on your pc max speed problem, but you can solve your problem by reinstalling the NVIDIA drivers.

    Here are my instructions standard copy/paste of the JKB1687 article for your reading pleasure:

    If you are using an NVIDIA video system (whether on the motherboard or a supplement), the installation of the NVIDIA software added one or more startup items to launch the NVIDIA Control Panel.  They are set to launch and run whenever your system boots.

    If it worked before and you have made some system updates lately, something is messed up with it or your system has an affliction of malware.

    To see what commands look like, click Start, run and enter in the box:

    Msconfig

    Click OK to start the System Configuration utility, and then click the Startup tab to display the startup items.  You may need to drag the autour columns to see things better and like msconfig isn't a Boot Manager (this is a troubleshooting tool) you can't "make of the display is wider.

    Items with check box will be launched automatically once XP restarts.  With the checkbox elements are still "installed" but not set to start automatically every time you start XP.

    The NVIDIA partners start lines see you in msconfig Startup tab will look something like this:

    RunDLL32.exe C:\windows\system32\nvcpl.dll, NvStartup
    RunDLL32.exe C:\windows\system32\nvmctray.dll, NvTaskbarInit

    If the C:\windows\system32\nvmctray.dll or C:\windows\system32\nvcpl.dll files are missing somehow corrupted, inconsistent, out of date or wrong versions (maybe), when NVIDIA applications trying to launch, messages can appear like this (or even complain):

    Rundll32.exe - bad Image
    The application of the DLL c:\windows\system32\nvmctray.dll is not a valid Windows image.   Please check this against your installation diskette.

    RUNDLL
    Error loading c:\windows\system32\nvmctray.dll
    %1 is not a valid Win32 application

    If you don't think you use the NVIDIA Control Panel, you could simply disable the items is msconfig to prevent it to launch when you start your computer.  If you use Control Panel NVIDIA, deactivation of the elements and will leave your system without (perhaps not a good thing) NVIDIA Control Panel.

    You could just go ahead and disable the startup items in msconfig (deactivation does not uninstall anything), restart your system and understand the functioning of your system.  If things get worse, you can rerun msconfig and reactivate the NVIDIA elements, but I hope that you will not want to fix things the right way.

    Disabling items in msconfig is not really fix things and you will not have a NVIDIA Control Panel, but some people don't know what the NVIDIA Control Panel looks so can be good.  You will have stopped the message from popping up every time you start.

    If you want to use the features of NVIDIA Control Panel, you must repair or reinstall your NVIDIA software.

    The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

    It is recommended to run the scan NVIDIA with Internet Explorer.

    Here is the link to the support page NVIDIA for the scan:

    http://www.nvidia.com/download/Prescan.aspx?lang=en-us

    Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

    Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

    Download and install the recommended driver and restart your system.

    If following their indications do not straighten things, then follow these steps:

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
     
    Click Start, run and enter in the box:

    Msinfo32

    Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
    information here.

    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

    This will minimize back Q & A and eliminate guesswork.

    There will be some personal information (such as the user name and the name of the system), and everything seems to be
    information private for you, just delete pasted information.

    When you have the time, I could do that too:

    Perform scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

  • C:\windows\system32\xpsviewer error opening message has encountered a problem and must be closed.

    I am trying to open MS C:\windows\system32\xpsviewer, currently running on MS XP Professional.

    Get an error message whenever I try to open XPS.

    The message reads "XPSViewer.exe has encountered a problem and needs to close. We are sorry for the inconvenience ".

    I tried looking for the answer, but they seem to relate to MS Vista or 7?

    I wasn't sure what I should put it in so I chose programs?

    Best regards

    Anthony Tidey

    I would like to uninstall the XPS Viewer, then download and install a new copy.

    I don't know where you got your copy of Microsoft XPS Viewer, but it was packaged with XPS Writer in the Microsoft XML Paper Specification Essentials Pack

    I have not downloaded this, but I think that you don't have to install the XPS writer if you do not want to.

  • I keep getting "C\WINDOWS\system32\rundll32.exe" when I try to do something in the 'Control Panel'. How can I solve this problem?

    I keep getting "C\WINDOWS\system32\rundll32.exe" when I try to do something in the 'Control Panel'. How can I solve this problem?

    Hello

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed?

    · What is the number and the model of the computer

    Try the steps listed in the link below and check off the results: cannot find the Rundll32.exe file when you open the control panel: http://support.microsoft.com/kb/812340

  • My system restore function has a problem, error: AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll

    original title: my system restore function has a problem

    my system restore function has a problem

    error signature

    AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll
    ModVer.5.1.2600.5512 offset 00009836

    What can I do to recover my system restore feature?

    I was going to do an installation of hotfix os from the orignal disc but got waring the operating system installed is newer than the one on the disk (I have installed the latest service packs)

    Hello

    1 did you changes to the software to the computer?
    2. what happens when you try to use the system restore? You get the error message?

    You get this error message if you already have a newer version of the operating system and then if you try to install an older version on it.

    Method 1.
    Temporarily disable the security software installed on the computer and check if the problem persists.
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Method 2.
    Please check if you are facing the same question when working in safe mode.
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to start in safe mode of Windows XP.
    e. when Windows starts, try using System Restore and verify.
     
    Hopt this helps.

  • XP SP3: "access denied" to \System32 programs command-line, device USB Installer problem

    Hi all

    I recently had some problems with file/folder permissions after the removal of some trojan virus and now it looks like system & user permissions are scrambled for important system files into \Windows.

    The symptoms are:
    -Windows cannot install any driver of all new storable USB device that I connect to my computer, only the previously used one are recognized and properly displayed in the Explorer. For any I get a message saying that Windows cannot find the driver, even if I manually pick up the correct driver to the correct location, it does not install.
    -I can not throw more my computer-> right button Device Manager, I get a message saying that it cannot be launched, but I always open it manually goes \System32 to reach the file.
    -From the command line, I get an "access denied" to any program of system, I try to use, such as SECEDIT to reset as described in file permissions:http://support.microsoft.com/kb/313222

    If someone knows how to fix these on \Windows file/folder permission issues?

    Thanks for any advice,
    Alex

    Hi Alcor,

    I suggest to follow the instructions in this article to create a new profile to see if the problem exists:

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;326688

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem starting problems damaged or missing \windows\system32\config

    When I start up my CPU I get this error message

    "Windows could not start because the following file is missing or damaged.
    C:\windows\system32\config\system

    You can try to repair this file by starting windows setup using the original CD-Rom. Select 'r' setup in the first screen to start repair . »

    I use two different articles for this problem. However, I always have problems, and it does not help

    Article first link http://support.microsoft.com/kb/307545

    To step #5
    "copy c:\windows\repair\system c:\windows\system32\config\system.

    When I enter this information it is said: "the system cannot find the file specified."

    I think that the cause of \windows\system32\config\system is missing or not there. That's why he can't locate it

    This is the 2nd article I tried http://www.help2go.com/Tutorials/Windows/C:%5Cwindows%5Csystem32%5Cconfig%5Csystem_missing_or_corrupt.html
    In the option 2: Chkdsk/p has not set it
    Option 3: In this part "C:\system~1\_resto~1\rp23\snapshot>copy _registry_machine_system c:\windows\system32\config\system.

    It gives me the same error message: "the system cannot find the specified file" Type help if you need assistance

    If anyone has this problem, please help!

    For the #5 step, you are able to go in the C:\windows\repair folder and then look at the file "system"?  If you do not have the file repair or that the file is not in there, he can point to a larger problem.  In addition, run chkdsk /r and see if that helps.  Then run SFC/scannow and see if it is able to repair any problem.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error there is a problem starting windows C:\windows\system32\spool\drivers\x64\3\ssnetmon.d64, when you try to open a session

    Original title: ssnetmon.d64 - error message when you connect

    When I log in, I get the following message.
    The message is as follows and appears three times:
    There was a problem starting windows
    C:\windows\system32\spool\drivers\x64\3\ssnetmon. D64

    I use Windows Vista Ultimate 64 bit

    Thank you for your response.

    The problem was due to the Seagull printer driver installation. I just reintalled driver to fix it.

  • I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

    I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

    Hello

    • When you receive this error message?
    • What were the changes made before the issue started?

    Try the SFC scan on the computer.

    SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

    Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • What does this error message "a problem has been encountered a problem of personalized treatment tools manifest file (C:\Windows\system32\MSCFGTLC.» (XML)"and what can I do about it?

    For about a week now that I get a lot of 'freeze' and try to eliminate contradictory processes that cause my Vista Home Premium 32-bit w / SP1 system to "lock" onto me.

    I tried but can't do a restore effective because none of my points of store go back enough to solve the problem.

    So I try a "clean boot" as described in article http:// support.microsoft.com/kb/331796.

    My system has installed significantly since turning off half of the services non-Microsoft configured to run at startup.

    But every time I launch msconfig.exe I get this error message-"a problem when processing custom tools manifest file (C:\Windows\system32\MSCFGTLC. '"). XML ".

    It is not stop fiddling with the boot configuration, but I don't think I should get this error. Any ideas on what it is and what to do about this?

    HP Pavilion dv6700 Notebook PC AMD Turion (TM) 64 X 2 Mobile Technology TL - 60 GHz 2.00 3.00 GB RAM

    Hello ch4rlie1949,

    Run The System File Checker utility:

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the appropriate Microsoft versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search .
    2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
    3. To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)

    This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Driver problem? N ' not load driver \SystemRoot\system32\DRIVERS\kbdhid.sys...

    Recently, I get a blue screen message whenever I start my Vista Toshiba laptop. I think that the hexadecimal number is 7F with a bunch of 0, but it certainly has a 7 followed by a letter. When you use boot logging, a dozen drivers who appear to be associated with Toshiba or an AMD processor seem to be does not. So, I tried the BIOS update. Most of them disappeared accept the following:

    Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
    Did not load driver \SystemRoot\system32\drivers\parport.sys
    Did not load driver \SystemRoot\system32\DRIVERS\kbdhid.sys
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS

    Could someone tell me if any of them would cause a problem or anyone could suggest as what to do to fix my blue screen of death problem?

    Hello

    Have you added a hardware or drivers updated recently? Check Control Panel - Windows to see updates
    If all drivers have been updated it just before what is going on has begun.

    For 7f - this might be a problem of material such as uncomfortable cards or memory, while there are other causes.
    Power electric low could also lead to this. Use the troubleshooters above and below, and when you get to the
    pilots and segments of memory refer to my next message below and then return to the if necessary troubleshooters

    If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and all cables (are not
    just try to squeeze) on both ends if they are accessible and on the device ends if not (remove cables and)
    the relocation of their aid to eliminate minor corrosion).

    If a laptop or a PC, you will need to take to a store (not BestBuy or other BigBox stores) or your system
    Support from the manufacturer.

    ----------------------------------------------------------------------

    BCCode: 7F 0x0000007F which is the same as 0x1000007F

    UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

    This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

    Parameters

    The first parameter that is displayed on the blue screen indicates the number of trap.

    The most common trap codes are the following:

    • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
    • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
    • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
    • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
    • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

    Cause

    0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

    A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

    Solve the problem

    Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

    The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

    If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

    Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

    If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

    Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

    Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

    If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

    Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Windows/32/system32/cmd.exe problem

    I get an error message (I think) flashing and cascading to the bottom of my screen very fast.  As it flashes, it does randomly weird things like farm programs, program freezes and it appears on the info/start bar and side by side jumps.  The error message is in a rectangular box, the title is "windows/system32/cmd.exe" in the box says that access is denied.  The system does not have the specified path.

    At least, I think that he say he moving and flashing so quickly.  I scanned with multiple programs like Spyware Doctor security, Avast and Dr. Registre nothing works.
    HELP PLEASE!

    Hello

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
    The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
    a small box in the lower-left - show for all users can check only).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
    they loaded and much more. This exceptionally effective utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
    starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
    The command - line String, product name, file Version, company name, location in the registry or the file system,
    and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for