T1100: Question paper T1100 power
Reported problem that is paper load, but does not advance properly resulting in superimposed.
I'm waiting for more details and will post as soon as they are available.
Hello
He aldo would be a matter of paper.
Are you a print from a roll or single sheet?
If you want to confirm if the motor and the drive roller are mobile, you can look under the printer when it print.
If the drive roller is moving, but the book is not, the problem is the paper.
When I realized it's because:
-The paper has been loaded upside down
-L' printer was against something that was the roll of paper and PIN
-Not to unlock the PIN
-Paper to lourdes for the printer
-Not using the axis on the printer, but a set made for the roll of the book it was great to fit on the printer.
Check these things, I hope that the cause is on this list.
Best regards
Mike G
Tags: HP Printers
Similar Questions
-
Question about the power option "Sleep with a password on wakeup"
What is the difference between sleep with a password required to wake up and lock? I understand that if I choose the lock, other users can still connect?
Hello Jim,
Please keep us updated on the status of the issue. I apologize for the late response.
I would like to inform you that if you have not set a password on your user account, then Windows will not ask for the password to unlock or wake the computer from sleep mode. If you move the mouse or press a key on the keyboard, the computer will automatically unlock or to wake up the fashion 'sleep'.
See also:
Shut down (shut down), sleep, or put your PC in hibernation
Power plans: frequently asked questions
Hope the helps of information.
Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.
Thank you
-
Satellite Pro S300-10J - Question about the power of the microphone
Hello!
I would use my S300-10J for acoustic measurements on the speakers. (DIY)
For this configuration, I am using a microphone electret, the IBF EMM-08:
http://www.etfacoustic.com/micpreamp.htmlfor power, it's what suits him: 1.5 - 10 v / approx. 0.5 my
The s300-10J who provides or not?
Anyone who can recoomend a card external sound that has this provision? (if my laptop does not work)
Thanks in advance,
Bart SegersHello
I can't give you details on the microphone of the satellite Pro S300 tension because I didn t find all the details about the tension of mic jack, but I guess that it s a voltage standard as on others, laptops different.
As far as I know the external portable media microphone who need 1, 5V DC.
So I guess that the S300 this support too.That's all I can say about it.
Welcome them
-
Question on Mode Power button settings
What is the difference between Mode 1, 2 and 3 of the Mode for setting the button of power, except for the color change?
Hello
As far as I know using these modes you can simply change the color of power button.
Default value is always active and blue color and turns red when the unit is turned off
Mode 1 = is always on and lights up green when the unit is on standby.
Mode 2 = is always on and turns different colors during standby
Mode 3 = led power rollers by means of various colors and green during sleep.
OFF = power LED remains off.I can't tell you more.
Good bye
-
HP 6830: paper photo power supply problem
When you use Publisher to print a page with pictures and text, my printer HP 6830 seems struggling to feed photo paper. Printing seems to begin before the paper is introduced by. I tried all possible combinations of settings and yet the sheet comes out with the top of the cut image and there is the smear of ink on the back of the paper. I use HP Premium Plus Photo paper, but have had the same problem using Costco brand photo paper.
Hi @TerryC1,
Please check back with these photos.
It seems that whatever the ink was supposed to go at the top of the page was actually going on the reels, then break away on the back of the paper.
There is a smear of own ink option that can be made when inn is burrs on the back of the impressions. I don't really know if she can help to clean the ink on the rollers, but it's worth a try.
1 load plain white paper on the tray.
2. on the printer Panel, drag the screen to scroll to installationand then tap the Setup icon . The Setup menu is displayed.
3. slide the screen to scroll to maintenance of the printer, and then tap the printer maintenance.
4. press on the own smear Page.
5 once the printer prints a test page, press OK.
It can also help to clean the paper feed rollers.
If that's not enough I would contact HP Technical Support by telephone as they m ay other means available for them which can contribute to a solution to this problem.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process: -
Color LaserJet CP2025DN: Color Laser Jet CP2025DN pick-up and jam question paper
My printer continuously presents a problem of paper collection and then I get an error message "paper jam". The paper jam occurs when I found a sheet of paper half way along the lower tray and is not in the charger of rolls. Sometimes, you can see the edge of the sheet of paper in the couple in the middle of inches wide, that the leading edge of the paper is somewhat wrinkled. I was owner of the printer for 6 years and print only about 400 sheets per month. It also seems that interference produces more often when the bin is full or only 1/3 full. Also, it seems to happen more when I do a lot of copies when the printer is running hot. If I let it cool it actually will run better for a short time until it starts to heat up. It would help if I replaced the separation pad and rolls or is there another problem I have to troubleshoot everything first? Thank you for your expertise.
You need to replace the roller from tray 2. Separation pad will not need replace. Just do a search on google for the part and for instructions. As strange as it seems to get to the secondary service menu is usually the most difficult part of the replacement.
-
p6214y question card video &; power
I have a p6214y and I have just an Evga GTX 460 and a will to power supply Corsair GS600 these adapted to my pc?
Hi John
The answer is Yes. However, the slot next to the PCI-E x 16 slot should be vacant.
TIP: Drag the optical drives before before removing and installing the new power supply. It will make the installation a little easier. First make the power supply for your PC before installing new video card.
This "how-to" HP articles should be useful.
-
HP Deskjet 5550: Deskjet 5550 paper double power
I'm having a problem with the paper that feed on my printer. Sometimes, he will feed 2, 3 or more pages at a time. I guess the rollers are either dirty or worn. I was looking for a repair kit for this printer, but were unsuccessful. Someone else this experience? If I knew how to access the feed rollers, I could probably improve this problem. Any ideas would be appreciated. Thank you
Hey Robertmt,
You're right on the kit repair, seems not to be. But I found a guide on how to clean the rollers of the printer - hope that helps a little...
http://support.HP.com/us-en/document/bud09629/
See you soon
-
Question about the power of the battery on Equium A210-1AS
Hello...
the battery on my Equium A210-1as life is supposed to be around 2 and a half hour but it s more in 20 minutes.
No idea why?That sounds like a bad battery.
I think that Windows displays a fully charged battery or not loading stops at XX %?If your laptop is still under warranty, go to a local ASP and allow your battery to change.
If your computer laptop doesn t have guaranteed, an ASP may also make a bid for a new battery. This part doesn't have to be so expensive.
-
Question of battery Power level indicator
I got Windows 7 Starter on my computer for two years without a problem. I was in Korea last month and here, the system danced two updates. During the first update, the battery level was at 85%. After installation of the update, the battery would not be deducted more than 85%. During the second update, the battery was 75% and it is now that I can charge the battery. How can I fix it?
Hello
1. What is the brand and model of the computer?
Please follow the methods.
Method 1:
Follow the instructions in the link.
Solutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems
Method 2:
Completely drain the battery, then remove and reinsert the battery and check if it charges completely
Reference links:
http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery#section_3
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter
-
I have a laptop HP G70 - 467 CL and was looking for either a piece of plug compatible for an adjustable DC adapter or the adapter authorized 12 volts for this model of HP laptop, A that I can recharge the laptop in the car during a trip without having to locate an outlet available to a halt. The channels of support regular it are not easy to locate all the options available in this regard.
Here you are...
http://www.shopping.HP.com/product/computer/categories/ac_adapters/1/accessories/ER691AA%2523ABA
car adapter
-
Good... Here's a broad question on a power adapter for a USB hub I.
My adapter said 2100mA... and the hub USBport says 2. 1 has...
Those are the same characteristics not?
Yes 2100ma equals 2. 1A
-
Question Inspiron 3537 Power Up and/or battery
My 3537 is about 2-3 years of age. Last week, when that I start, the screen shows a low battery problem. The charger is working (I tried another), but the battery charge LED does not illuminate. I got by removing the battery and charger, wait a few seconds and replacing both. Then the battery LED lights up and the laptop starts normally.
Could it be the battery?
Thank you
Wine
"I got working by removing the battery and charger, wait a few seconds and replacing the two." Then the battery LED lights up and the laptop starts normally ".»
Update the system (BIOS) configuration:
-
T1100 load paper (excluding sensor replaced paper)
Designjet T1100 question paper of loading. Try to load the roller support stock into the printer with no luck. Printer is not recognised paper being inserted. Paper sensor replacement
Q5669-60676
always the same question. Replace the next step of the
Council of the Q6683 - 60190 PrintMech PCA?
Relocation of the Q6683 - 60190 PrintMech PCA card did the trick. Hope this will help others in the future
-
M30-604: power new consumer HD
Y at - it no problem changing the hard drive of a satellite M30 604? The original is a Hitashi Travelstar 80GN (4200 RPM). I want to put in a Hitashi Travelstar 7K 100 (7200 RPM). However, I saw the new should be 0.8 Watts more power when starting (4.7 to 5.5). It comes in addition to 18%! So, my question: this increased power consumption can be manipulated?
Hello Xydro
To give a proper answer to these questions is not easy. In my opinion to avoid any problem, but it is very important that you be sure that if there is any support in case the disk HARD doesn't work properly. The fact is that this time when the HARD drive is integrated, you will know if the HARD drive makes problems.
I put t know where you want to buy this drive HARD, but maybe you should contact the authorized service partner.
Maybe you are looking for
-
How can I get thunderbird to download the messages in Inbox SENT in my talktalk pop3 server
Sometimes I'm away from my laptop (i.e. thunderbird) and need to send messages by connecting directly to my e-mail from talktalk... but I want to see them the same as incoming messages downloaded when I open thunderbird on my laptop.
-
So as the title says; should I keep location? Should I put it on battery saving mode or GPS (high accuracy)? I think it would be very useful to keep on in case my device is lost.
-
Today, after the boot update my phone service is not started. Even I didn't know the condition of the battery if I put in charge. It is quite dead. What should I do?
-
Given a VI, I can determine...
... If it is contained in a high school? If so, how can I get the only secondary mention? Sanks
-
A hunt for the Scan newspapers... _
Between sfc/scannow and MSE scan newspapers... and I was told there are other generators of journal autonomous automatic analysis in the background of the programs, there are files of newspapers of space-occupying stored in dozens of MB in size. I ha