Battery ThinkPad Advanced Mini Dock (250410U) display will not extend

Similar Questions

• Satellite battery click on Mini L9W - B keyboard will not charge

  My keyboard battery will not charge, I left it loads for more than 24 hours after the battery 1 reached 100%.

  I checked the version of the bios that is 1.70. I read the other posts on this particular issue but unfortunately nothing works for me.

  It shows the symbol of charge on battery 2, but it did not go above 0%. If I turn on the battery runs immediately battery 1.

  Please advise me on this point because otherwise I will have to return my satellite click mini. Thanks in advance

  You completely turned the device off?

  Do... Press and hold the power button / stop until the device turns off.
  In addition, you can stop the unit pressing and holding the key SHIFT and then choose SHUT OFF

  Then check the connection between the keyboard and Tablet docker... possibly disconnect and connect again.
  Once the unit turns on again and check the battery State of charge connection adapter to the device.

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)

• T400 and Advanced mini dock

  Hi - I have a T400 with integrated graphics card and I'm looking into getting a mini dock advanced to run an external monitor.

  What output resolution has done with success through the advanced mini dock VGA port? -This will help me understand which monitor to get, I read that many had bad signal of the dock when using the VGA port.

  As my T400's only integrated graphics, I won't be able to use the port DVI - is this still true or something changed?

  Your comments would be much appreciated,

  Thank you

  Cosmin

  Hi cosma12,

  Your T400 with integrated graphics can digital video output through integrated DisplayPort or DVI connector on the advanced Mini dock. It is only the switchable T400 graph that cannot use DVI with integrated graphics card, they must use the ATI chip instead.

  Graphics from Intel in the T400 can drive 1920 x 1200 on DVI or DisplayPort - which I think is the highest resolution, supported by the single-link DVI. If you are shopping for monitors, I highly recommend to make one with a digital input: DVI / HDMI / DisplayPort. the video quality is theoretically (and practically) better than when using analog (VGA).

  EDIT: Oops, the T400 (and R400) do NOT have the DisplayPort, while the largest do T500/R500. My bad.

• T500 compatibility with Advanced Mini Dock 2504

  Help please!

  I have a mini advanced docking station 2504 I used with my R61 successfully for a few years.

  I recently bought a T500 and was informed by the sales department that my existing 2504 advanced mini dock would be compatible with the T500.

  When I use the mini dock with the T500 no USB port works not at all?

  All the solutions or do I need a different mini dock.

  they are definitely compatible.

• 2504 advanced Mini Dock

  Hello, I think I have an advanced Mini Dock for use with T60 my family Christmas. I would use it to connect the laptop to our TV for watching movies.

  My TV has these ports:

  Composite

  Component

  S video

  HDMI

  There are port VGA No.. If there was, it would have been great. :/

  It supports resolutions up to 1080i. I would be able to establish a connection? If so, how?

  I don't want to buy what it does not work...

  For a better quality of film get a dvi to hdmi adapter, but you'd need a race a separate line for audio, as the dvi to hdmi adapter are not audio.

• T400 and Advanced Mini Dock - does not detect DVI monitor

  I have a T400 with integrated graphics and Windows 7 Professional 64-bit, and I recently bought an Advanced Mini Dock for it.  I have a Dell 1800FP monitor connected to the dock via the DVI output.  When I anchor the T400, the system does not detect the external monitor.  If I go to the resolution of the screen and click on detect, it does not appear.  The weird part is that if I reboot then than in the dock, when the system comes back he * is * detect and use the external monitor.

  Any ideas what's happening?  Other equipment connected by the base (USB, Ethernet cable devices) all work very well.

  I think I solved this problem.  I uninstalled my video driver and installed the latest version from the Lenovo Web site (which was more recent than the one found by Lenovo System Update).  Now my system properly detects the external monitor when I attach to the docking station.

• Want K203TX: Display will not wake up

  This is a new laptop.

  I did nothing about it, other than updates of Windows install and create recovery discs.

  • I put the option "turn off the display of" 1 Minute.
  • IMPORTANT: I put the brightness screen completely to zero, the lowest setting possible, by using the keys on the keyboard or the brightness option in Windows.
  • Let the laptop computer idle for a minute, the screen can accommodate as it should (the laptop is put to sleep after 30 minutes, only display that sleeps, the laptop is still awake).
  • Move the mouse, press the keys on the keyboard, the screen doesn't come back to the top. The computer is still in place and in the course of execution-i can switch keyboard backlight On / Off with the keys, but the display will not wake up.
  • Press on the "brightness +" button on the keyboard, the screen wakes up. It is the only way to wake up. The other option is to press on and hold the power button, force a stop down and restart the computer.
  • This occurs ONLY when "brightess" is set to the lowest level. If the brightness is set to again one level above the lowest, the issue cannot be reproduced. Move the mouse or press any keyboard will wake up the screen in this situation.
  • The two graphics Intel HD 5500 and GTX 850 M drivers are up to date.
  • BIOS is updated as well.
  • Battery / sector makes a difference. If the display brightness to the lowest, the screen will ALWAYS fail to wake up, regardless of which power source is being used.

  What should I do? Please don't tell me this is a minor problem and I have to live with it.

  There are so many problems minor with this laptop, and all these add make a total piece of cr...

  My almost 5 years probook with a second generation core i3 processor and no discrete GPU is better than this all-new 5th generation core i7 + laptop GeForce GTX.

  I'm starting to regret this purchase. I should have gotten another probook. Thought that offers want a better "bang for the buck", and now I think it was a huge mistake.

  Anyway, no idea how I can get this fixed? Looks like a right driver problem? Or is this a hardware problem? Can we with a trial of mobile Envy this out and tell me if the problem can be reproduced on their platform? It cannot be reproduced on my Probook.

  Thank you.

  Hi @johnwinchester,

  I'm so glad to hear you're solves the problems you had! The key is that you are now without a problem.

  To answer 2 questions;

  1. to my knowledge, if you purchased the HP 3 year extended warranty on the spot with a cover against accidental damage, then it usually starts from the date of purchase. Be sure and check out I would suggest either go this site check your product warranty and/or contact us.

  2. I'd say creating new recovery disks. The old drive will not help to you on your product. You have the ability to create new disks of recovery of the product without any reported problems. I wouldn't take the chance, I just came out with the old and turned to the future.

  I hope this has helped!

  Have a great day!

• Every time I start up the Visual display will not.

  Original title: Aero

  every time I start up the Visual display will not.  I have to adjust from the start menu.

  I use a portable G6 pavilion. The screen is set at 1360 x 768 256 colors 60 hertz.
  He only did this recently.
  Any answers please.

  every time I start up the Visual display will not.

  Hello

  What exactly on your screen going bad?

  In the meantime try reinstalling the latest graphics drivers for the computer. Find them in the HP website.

• Will only mirror 2 views will not extend poster in 10.10.5

  I have the latest Mac Air with 2 monitors of Garland of Dell U2414H. It reflects only every monitor that is pretty useless. It will not extend the poster. The Layout tab shows also the 2 monitors of different sizes when the settings are the same for each.

  The worst part is that they will reflect only when I chose to expand.

  

  Same situation with my MBA from 2015.  I have 2 screens Dell U2414, two who supported the MST and DP 1.2

  I can't get their mirror, they won't have the Garland.  I also tried to connect to my MBP 2014 with the same result. The only way I could extend the poster was to connect each monitor port thunderbolt/display on my MBP. Of course, it won't work with my MBA because there is only a single port TB.  I know the only other autour work would be to run a display on the port of TB and another a USB port with an adapter, which, in my opinion, is a terrible solution there is a USB port and not a mess on my desk.  Everything I've read, this is a limitation of Mac OS X, not a hardware problem. I run Parallels with a Windows VM on my MBA and he sees both displays fine with wreath using the port of TB on my MBA.  What gives Apple? Why intentionally block monitors third-party DP working with OS X?  Frustrating.  The other frustrating thing is that there is no work around what I see-

• ThinkPad W700 Mini Dock 2.0

  Hi all

  I just ordered a week ago a new Thinkpad W700 with W700 Mini Dock 1.0 (43R8782) and I always look forward to receive. Today I received an email from Lenovo telling me my order was changed and the Mini Dock was cancelled due to the EOL (End Of Line?).

  I went back to the Lenovo Web site and I found the same Mini Dock still listed and available for order. I also found a new Mini Dock 2.0 (57Y4345) for the same price, but the power 170W (41R4421) is not included. Food costs an additional $ 100. There is of course NO difference between the old model and the other beside the fact that food is not included more.

  Now, I understand Lenovo need to make money somewhere, but is not illegal to do something like that? I don't think that here in Quebec there is what is called a false statement or taking advantage of the customer? If the new docking station was much cheaper I would probably bite the bullet and just order it, but it's crazy.

  Am I the only one here who thinks that there is a problem with that? Especially since I already placed my order in good faith, and even when they say it is no longer available, it is still listed as available on the site? What can I do about it?

  Thanks for your thoughts.

  Alain Hogue

  Montreal, Qc

  ------------------------

  Mobile current: Thinkpad A31p Pentium 4-2 GHz, 100GB HD, 2 GB RAM, 1600 x 1200, Win XP SP3

  Just a quick note to let you know that I received superb service of all the peoples of Lenovo. They were very helpful and understanding and it took a bit of time, but this issue has been resolved to my satisfaction.

  Thanks for your help.

• Tecra M7 - display will not be repeated after 10 minutes of inactivity

  Hello everyone, I'm new here so please be patient with me! :-)

  I've had my new Tecra M7 for about a week now, and while everything else seems to work perfectly, there is a problem with the LCD screen. By default, it is configured to turn off after being idle for 10 minutes. The problem is that it won't resume from this State.

  I see that the laptop itself is working (he reacts to pressure on keys etc.) but I had to Hibernate and resume the screen lights up. The touchpad and keyboard activity doing nothing, only hibernate.

  At the office, I use the laptop dual-view mode with external 19 "LCD screen connected as secondary display. In this case, the external LCD display will resume after moving the mouse or touch the touchpad, but the primary laptop LCD screen will remain inactive until hibernation.

  My question is: do you have someone running into the same question, or that someone has any ideas?

  I thought to upgrade drivers Quadro NVS, but discovered that the pre-installed ForceWare drivers (version 84.52) accompanying are actually more recent than those displayed on the nVidia site (84,26 - confusion)! Also he reports (everywhere in the system), it has 256 MB of video RAM, so the specification Tecra M7 on the box says 128 MB so I don't know which is correct?

  Thanks for all the ideas in advance!
  RADO

  Hello

  Certainly, the nVIDIA Quadro NVS 110 M on the Tecra M7 graphics card supports 128 MB of video RAM.
  Graphics drivers from Toshiba are not the same thing as the manufacturers of original cards drivers. Toshiba drivers are a bit changed.
  You must use the drivers from the site of nVidia, but especially on the site of Toshiba.

  If there is a newer version of the graphics card driver, then remove the old and install the driver from the website of Tosh.
  Additional if the new BIOS have been published, you can try to update. But be careful. Be sure to use the good BIOS and the correct procedure for updating the BIOS.

  Good luck..

• try to install GEFORCE GTX650 in my HP Pavilion p6 - 2413 has but the display will not illuminate.

  Try to install the GEFORCE GTX650 in my HP Pavilion p6 - 2413a, I plugged everything in and the fan seems to work but the display does not illuminate.

  There is another cable with 2 multi 1 6 end plug but I can't work out where to connect.

  I tried to find it on youtube but can't see where he's going to help me please.

  Hello

  You need a greater power to support a PCI-E power connector 6 pin. Try a Corsair CX500, or CX600. The image below is that of a NVIDIA GTX 650 which shows where to connect the PCI-E 6-pin connector to the graphics card.  Most of the HP PC which have a greater power or 460 watt have they support for the PCI-E power connector 6-pin.

  

• Help, please! Pavilion 754n no display will not even show BIOS

  First, it has a 80gig HARD drive, everything worked fine initially, then I changed hard drives and put it in a concert 20, have all two XP on it, I wanted to see who was on the 20, after I plugged it in and pressed the power button there is no response, nothing on the screen. The power button is green, then he went to orange, the fans kicked on and other that that there was no noise, stay like that forever. So I thought (OK something wrong with the hard drive), which is weird, because I know that the HARD drive works (and I have tried since and it does not start on another PC). So I put the original, when I hit the power button is the same thing, it's been like that since, I tried two other HARD drives.

  Is troubleshooting I've done so far, reset the CMOS on the map, unplugged everything on the Board and reconnected it looking for the loose cords and the like, tried different riders on the original drive eventually return to that I started on what he did start from the beginning, tried to take all of the ram on resettlement try each stick in each slot try diff ram total, trying to start between each step, tried another CPU that I know works, I tried to start the original disc 80gig HARD on a Dell bios page, it says (error reading disc press F1 to re - start) I press F1, 5 - 10 times it will not start, something happened to this drive while it was initially on the dell HDD then I put the 20gig in the dell and it starts fine. If I put this concert 20 HP I get the same result as above, so I know it's not a hard drive issue, obviously because even with no DISK in the HP, I should get at least to the page of the bios that I can't.

  So I narrowed down it to the mobo, and my question is has anyone at - he heard a simple commutation of the HARD drives causing a mobo don't not working? Also any ideas on why the disk HARD original stopped working after spending the 20gig and then back? Can anyone think of stuff or procedures to try that I have not already?  Thanks for any help!

  Yes spend hard disk could negatively affect the motherboard if connected to ground or precautions rules were observed. Have you been paying attention to connect you to the case? Any discharge of static electricity on your part to the Board of directors could have killed the jury. I can only suggest you remove the MB and place it on a surface antistatic is to say cardboard and connect only the 20/24 pin and 12v atx power connectors. If the jury does not appear now so it is safe to assume its dead. If it should power up you know now it is shorting out on the connections or the case. Good luck.

• Second monitor will be in the image, but will not extend.

  HP Desktop

  Windows 7 64 bit

  Video ports factory

  I have a connected VGA and works very well.

  The other is attached through DisplayPort and it will be in the image, but it will not display as a second monitor or even detect it.

  I've been working in display of all settings.  Any ideas?

  Thank you

  John

  Hi John,.

  Thanks for posting your request here in the Microsoft Community.

  I suggest you to see Microsoft article procedure below and check if it helps.

  http://support.Microsoft.com/kb/976064

  For more information, see the links below.

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  I hope this helps. Please post back if you need more help, we will be happy to help you.