T400 - Bluetooth - Unattended installation instructions/procedure required software.

Hi all

Technically, this isn't a problem but a request for information.

I need the info because it will allow me to win that makes it a more awkward solution and I know it's there because the factory preload must have used a method to get this working automatically.

I know I wrote a lot but its all the and I don't want someone of Lenovo to have to ask three times for lack of information, so I have listed everything.

BASELINE SCENARIO

ThinkPad T40 [6474-1]
Windows XP Corp w / SP2 NOT the FACTORY PRELOAD OR DERIVATIVE>
I have two 'prototypes' working with T400 by making the current image of the company work on this platform.
We test brand and we need to preload of factory XP installed on it.
The SATA, sysprep, drivers, webcam-reboot-question, etc. have all been corrected and its achievements up to a point where the Device Manager is clean as a whistle and no mistake.

I'm not new to what our image is my full responsibility and it works perfectly on 7 different hardware platforms, 4 of which are laptops.

At the end of the new image, the software following 'silently' install in the order indicated THAT if the system is detected at a Lenovo 6474 - class.

[1] ACPI Power Management SETUP. EXE S - SMS N/A
[2] Hotkey Utility SETUP. EXE/S-N/A
[3] Lenovo System Interface Driver SETUP. EXE/S-N/A
[4] utility KEYBOARD Customizer. EXE S - SMS [1] & [2]
[5] Director presentation Setup. EXE S - SMS [1] & [2] & [3]
[6] ThinkVantage Access Connections SETUP. EXE S - SMS [1] & [2]
[7] CONFIGURATION of the power manager. EXE S - SMS N/A
[8] Bluetooth Enhanced Data rate software s/o s/o

All drivers are from Lenovo, the second field is the silent installation command line and the third is the dependency table.

BASIC PROBLEM

As you can see, I don't have a method to do the installation in silent mode of the Bluetooth software.

I tried the Setup program . EXE s - SMS and installation. EXE/s in the main folder and subfolder Win32, the record of the driver but no dice.
It does nothing and leaving sitting there for a certain time, and then restart doesn't show the Bluetooth software installed after the reboot, so I know it does not work.

The Setup program . EXE s - SMS switch is common to all programs using InstallShield for installation in opposition to software Lenovo owner who uses the /S switch and the Bluetooth software uses InstallShield but the silent switch does not work.

The link on the website of Bluetooth driver software is driver ONLY I met who didn't list a silent method of install it and there is no SW1. XML file in the folder of the driver either. I'm pretty sure the SW1. XML file is the file used by the factory preload for install the software after the listing of PCI devices.

Do it manually [Setup.exe, Next, Next, Finish, etc.] works like a charm and does not require a reboot even that pilots have been automatically installed during the Mini-Setup after the sysprep/re image.

The best option would be for a person of Lenovo to let me know the command that I need to run to get the silent option to install the Bluetooth software.

A secondary option would be that Lenovo to help me with what follows in what concerns the procedure, or just give me the below CMD files.

On the laptop that factory preload, the file swtools contains the drivers installed on this model and there the same Bluetooth driver as the site in which he has no SW1. XML or information without supervision.

I came across the following file in the root folder that has some interesting info: c:\swtools\modules.log

Almost at the beginning are these entries

? evaluation of filters for 4gglw6a1 - thinkpad bluetooth software for helike
? -filter returned true
? result of the filter expression is true

? evaluation of filters for 4glth2a1 - thinkpad ms bluetooth inf for helike - copy only - lc
? -filter returned true
? result of the filter expression is true

looking for blue, the following entries much later in the reference file the above...

23:04:28.84 Thursday, December 11, 2008, from c:\swwork\other\4gglw6a1.cmd
ThinkPad Bluetooth Software for Helike
Thursday, December 11, 2008 23:06:12.29 over c:\swwork\other\4gglw6a1.cmd

23:16:21.34 Thursday, December 11, 2008, from c:\swwork\network\4glth2a1.cmd
ThinkPad MS Bluetooth INF for Helike - copy only - LC
Thursday, December 11, 2008 23:16:21.46 over c:\swwork\network\4glth2a1.cmd

Obviously to have these files CMD at hand would be good but the swwork file referenced there is no because it has probably been deleted once completed the preload process.

I have a ghost of the factory image to preload when his "fresh" on the drive hard and don't not started even once.
I did this just after I slapped him preload on but before I started the first time.

I can recreate the image on this laptop with this image and pause before deleting this folder if this can help see me the file in the BACK [Winternals remote recover] but I would still need to know when to stop, etc..

Thanks in advance. :-)

Original command-line from a factory without first restarting preload goes directly into the files using Winternals recover remote is as follows:

setup.exe/SB /ri /ru in the main folder, not the file under Win32.

This is how its supposed to run.

Guess what happens when you Google only switches with a double quote before and after the switch.

It immediately tells you on page of Bluetooth driver for Vista drivers!

So, basically, Lenovo it documented on page Vista drivers but I forgot to add it to the page drivers XP.

Lenovo, it's a serious blunder that cost me a days work on something that should have been available on the page as well XP anyway.

In any case, if someone reads in fact these, please change the appropriate page.

Thank you.

Tags: ThinkPad Notebooks

Similar Questions

  • When itunes installation receive error message with 'install windows package' and 'procedure requires a rise. "

    Original title: Windows Installer Package

    When you try to install itunes, I get a pop up box that says: there is an error with the windows package install and it will not continue with the download.  I went online to download the package to install to my computer (Windows Vista) and when it starts to download get an error stating that "the procedure requires a rise." What it means?  I assume this has something to do with security in the administrative account that I am signed on the label on when problems occur.  Thank you!

    Hello
    1 did you change on your computer before this problem?
    2 - is a problem only with itunes?
    Follow the suggestions and check if that helps.
    Method 1
    a.Right click the download file.
    b.Select run as administrator.
    Method 2
    You can follow the procedure in the article.
    Problems installing and uninstalling programs on Windows computers
    http://support.Microsoft.com/kb/2438651#reso2
    See also:
    Problem installing iTunes or QuickTime for Windows
    http://support.Apple.com/kb/ht1926

  • System requirements of blackBerry Smartphones in the installation of Blackberry Desktop Software...

    Hello..

    Can someone tell me the configuration required for the installation of Blackberry Desktop Software like RAM, processors, etc.?

    I really appreciate your help... Thank you very much.

    Best regards

    You can find them here - http://uk.blackberry.com/services/desktop/system_requirements.jsp

  • Satellite P205 Bluetooth Stack Installation-How long does it take?

    My Satellite P205 does not have an internal Bluetooth, but it is able to Bluetooth. I plugged a Broadcom USB and it worked at first. Now, I get an error message "Unable to load the Bluetooth Stack".

    I downloaded Toshiba Bluetooth and run the installation program. The first window opens and the bar fills to the end, and a second window opens and moving up five blue bars. Another window opens asking to have the connected device, and then click OK. It is then repeat the application every few minutes. The USB Bluetooth key is activated just before each of the pop-ups, and then the light goes out back. I thought that it would be a tedious process, because there was an instruction sheet giving details of an unattended installation. I'm unfortunately not enough common sense to change my installation script.

    Any help would be really appreciated. I was hoping to be able to synchronize my Blackjack II without the USB cable I keep getting lost!
    Thank you!
    Bleve410

    When you use the third part of external hardware you should also get software for it.
    You have a few facilities CD with drivers and software BT?

    As much as I know Toshiba Bluetooth stack can be used on the portable Toshiba with BT modules already integrated or if you get an external device but with license for battery Toshiba BT.

  • Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

    Hello.

    I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

    I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

    The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

    Why the Sun Java Runtime Environment is necessary?

    I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

    Thanks in advance if anyone is able to help.

    Kind regards

    John

    Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

    Satellite Pro P100 (PSPAEA)

    Chipset: Mobile Intel (r) 945 PM Express Chipset
    Memory controller: 82945 PM
    I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

    What I installed...

    03 - display Driver
    04 chipset Driver
    05 - network - upgrade Ethernet driver
    06 - network wireless driver
    09 - sound Driver
    10 - driver CardBus controller with UltraMedia
    12 - modem Driver
    13 - modem region Select utility
    14 Bluetooth Stack
    15 - Bluetooth monitor
    17 Hotkey Utility
    21 - SD Secure Module
    22 - SD memory card format
    28. DVD-RAM driver software
    33 user manual
    TOSHIBA fingerprint digital-software (from Vista drivers)
    TOSHIBA-disk-Creater (from Vista drivers)

    What I do not installed...

    01 - Microsoft Updates (I used Windows Update to do this)
    02. Sun Java Runtime Environment
    07. customer Intel utility
    08 Atheros Client Utility
    11 - touch pad Driver
    16 - C - infrared driver
    18 YPP/power button Utility
    19 utilities
    20 - buttons
    23 - assist
    24 - ConfigFree
    25 - zoom utility
    26 PC Diagnostic Tool
    27 CD/DVD Drive Acoustic Silencer
    29 WinDVD Creator
    30 - RecordNow
    31 DLA
    32 - DVD player

    Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

    The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

    With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

    Hope this helps and please post your results as it is good to share their experiences.

    Regards, Rob

    PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

  • Installation/uninstallation of Windows software is not available or is installed incorrectly.

    10 days ago, I had a crash on my computer then download a new antivirus package last of McAfee. I deleted the files altered the antivirus.

    Since my installation/uninstallation of Windows software has stopped working with 'not available message' I use Revo uninstaller, to remove the software from the hard drive and I cannot install the software with the window Setup.

    Does anyone know how to remove a corrupt Windows install and install new software?

    As another consequence of the foregoing, Windows Update does not work all of the updates fail to install on multiplle automatic updates - even after using Microsoft Fixit Center. To try to solve this problem, I uninstalled packages network 4, 3.5 and 3 in reverse order with the intention of re - install. Unfortunately I'm not able to accomplish this task using Windows Update-"all the priority updates are 0 bytes

    All the specific details to remove and re - install the Windows Update software from the hard drive files. I've completed this task a few years ago, following instructions from Microsoft Support, but I do not have that information now.

    All the advice/guidance criicism has accepted with gratitude

    Dave Thomas

    Hi Thomas,

    I suggest you to follow the steps and check if it helps.

    Method 1: Unregister and register the Windows Setup program again

    (a) click Start, run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

    (b) click Start, click Run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

    Method 2: Run check file system (CFS) analyses and checks to see if it helps.

    File system (CFS) Checker

    Note: System File Checker allows an administrator to analyze the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. If the cache folder is damaged or unusable, you can use the sfc/scannow, sfc /scanonce or commands sfc /scanboot to repair its contents.

    Method 3: Rebuild the windows service install and check if it helps.

    Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

    How to back up and restore the registry in Windows

    a. open Notepad.

    b. copy the following into Notepad and save it asreset.regon your desktop.

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

    'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

    "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

    74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

    00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

    'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

    "LocalSystem ObjectName"=""

    "ErrorControl" = DWORD: 00000001

    "Start" = dword:00000003

    'Type' = dword:00000010

    "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

    "ServiceSidType" = DWORD: 00000001

    "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

    00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

    74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

    00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

    6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

    00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

    73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

    00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

    65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

    00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

    00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

    00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

    69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

    00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

    66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

    00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

    6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

    00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

    72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

    00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

    47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

    00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

    72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

    00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

    73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

    00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

    51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

    00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

    50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

    00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

    50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

    00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

    76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

    00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

    00.00

    "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

    00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

    c. Click Start.

    d. type regedit in the search field and press to enter.

    e. in the registry change windows click onfile and selectimport.

    f. navigate to the location where the reset.reg file and select the file.

    g. click ok on the windows screen once the registry is merged successfully.

    h. restart the computer and check if updates installs.

    Method 4: Download the Windows Installer (. Windows6 0-KB942288-v2-x 86.msu) at the following site.

     

  • I need detailed installation instructions to put a bought Windows XP Pro on a laptop HP 8710p Business.

    HP windows xp pro 8710p

    I need detailed installation instructions to put a bought Windows XP Pro on a laptop HP 8710p Business.

    Hello

    How to do a clean install of XP Pro:

    "How to perform a new Installation of Windows XP - Part 1 of 4"

    http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

    And you go on the site of HP to download XP drivers and software, etc. for your laptop model (choose the operating system from the list)

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3355687&TaskID=135&prodTypeId=321957&prodSeriesId=3369264&lang=en&cc=us

    And here is a link to the manuals for this model:

    http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual&lang=en&cc=us&docIndexId=64179&TaskID=101&prodTypeId=321957&prodSeriesId=3369264

    See you soon.

  • where can I find for Essbas11.1.1.3 Excel Add-in installation instructions

    Hello
    where can I find for Essbas11.1.1.3 Excel Add-in installation instructions?
    In the past I have install the following address:
    Foundation_part1_v17397-01, Foundation_part2_v17369-01 and essExcelAddIn_11_113_V17388 - 01.zip

    But I lost the instructions.
    David

    There is a software component Excel plug-in 11.1.1.3 stand-alone Installer. The version is 11.1.1.3.11 and can be downloaded from "My Oracle Support" - patch # 9147550

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • A required software component cannot be found or has been incorrectly installed.

    Using Windows XP to install the software for an OfficeJet6500 printer E709n all-in-one wireless.

    I get the following error

    A required software component cannot be found or has been incorrectly installed.

    Reinstall the photosmart software provided with the unit and try to scan the image.

    error code 8, [(5,0,0)]

    Hello rondegenaro,

    The error you see is probably due to files being not installed correctly. See if the fixes in this post on the forum help to solve the problem you are experiencing.

    A required software component cannot be found or has been incorrectly installed.

  • Can't find model number, installation instructions for the unit duplex for printer all-in-one Officejet 6110

    MY friend gave me a duplex unit to another printer 6100 series he had. We thought that it would be compatible. The HP site says that my all-in-one OfficeJet 6110 can use a duplexer, but that's all he says: no model number and no installation instruction.  Does anyone have any info or suggestions? I can't know just by looking at my printer.  (The duplexer No. FPU is C9101A).

    Thank you!

    To install the duplexer, you must remove the rear blankpanel of your OJ 6110.  The rear panel will be approximately 9 "wide and 4" high with two s tab that can be moved together in the output panel.  Snap the duplexer in place once it is removed.  Make sure that it is oriented correctly, the label must be on the bottom.  Use large buttons on the ends of the duplex unit to release the duplexer if it is to be removed or moved.

    With the duplex unit installed, you will need to configure it so that it is recognized by the driver.  See the post here for more information on activation of the duplexer.

  • SkipRearm during the construction of the unattended installation

    Is it possible to add the skiprearm in the unattended installation file that is built using the tool?

    Hello

    It could be possible to do, but is not supported for ImageAssist and it fails validation.

  • HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

    Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

    Hello
    If please try following the steps below and check if this can solve the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • Remote installation instructions Desktop App (Android).

    Where can I find instructions to install for my tablet of KitKat. I don't understand most of the requests for information gobbeldigoop. My IP to my office is not static, so I do not see how to put this address would work the next day. I do not connect on my desk so I have no connection, etc.

    Thank you

    Hello

    Thanks for posting your query in Microsoft Community.

    According to the description of the problem, please correct me if I do not understand that you're looking for installation instructions for download Android Remote Desktop application on your tablet of KitKat to display Windows 7 computer with remote access on your tablet.

    If I'm not mistaken, I would ask post you your query in Android support forum for the best answer.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • VCenter Unattended Installation - problems INSTALLDIR

    I have been using the published PDF which gives powerful assistance vCenter unattended installs the server: http://www.vmware.com/files/pdf/techpaper/vcenter_server_cmdline_install.pdf

    I have this job for the most part, but a part does not work, and I think I have nailed to the INSTALLDIR switch for the individual MSI files.

    For example, this command does not work (it does appear the msi help window):

    $arguments = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = "+ $InstallDIR / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log'"

    Start-Process - FilePath "D:\Installs\vCS\VMware-SSO-Service.msi" - ArgumentList $arguments

    However, simply removing the switch INSTALLDIR allows for installation to occur, for example

    ' $arguments = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log.

    Start-Process - FilePath "D:\Installs\vCS\VMware-SSO-Service.msi" - ArgumentList $arguments

    The PDF to think that this option is available.  In addition, I tested the switch in place without spaces and without quotation marks, so it doesn't seem to be a character double-quotes/exhaust problem. I am also using quotes and characters for passwords exhaust etc so do that...

    I've confirmed that this is a problem (for me at least) to:

    SSO

    Web client

    The inventory service

    vCenter Server

    Dump of the ESXi Collector

    Syslog Collector

    Any ideas?

    I try this using vCenter Server 5.5 Update 2 installation on server 2012 R2 using PowerShell (4).

    Thank you

    Tom

    For the moment that it is:

    $InstallDIR = "D:\Program Files\VMware\Infrastructure".

    Note:

    1. I also tried with an escape with double quote character in the variable argument (according to the PDF in my original post):

    $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

    $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite + ' INSTALLDIR =------"' + $InstallDIR + ""-""

    2. I also tried with the escape character (') - same result PowerShell:

    $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

    ' $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = ""' + $InstallDIR + "" '

    3. I also tried with a path that has no spaces - this works:

    $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

    $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = D:\VMware'

    So, who does not point to a problem with spaces/quotes - but I don't know what I'm doing wrong...

    I've added a line if it looks like this now:

    $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

    ' $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = ""' + $InstallDIR + "" '

    $myargs = $myargs + "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log ""

    Write-Host "command: Start-Process $exe $myargs - wait."

    Start-process $exe $myargs - wait

    The output from the Write-Host shows this:

    Command: Start-Process D:\INSTALLS\vCS\\Single signe-On\VMware-SSO-Server.msi/qr ADMINPASSWORD = Hello! 2 DEPLOYMODE = FIRSTDOMAIN SSO_SITE = VCS - SSO INSTALLDIR = "" D:\Program Files\VMware\Infrastructure "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log-attendre "

    The escape character is still there - suggesting that I do not understand how to use it!  I just removed the script and it works, so the controls are now:

    $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

    $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = "" ' + $InstallDIR + ' "'"

    $myargs = $myargs + "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log ""

    Write-Host "command: Start-Process $exe $myargs - wait."

    Start-process $exe $myargs - wait

    Write-Host now says:

    Command: Panel Start-Process D:\INSTALLS\vCS\\Single-On\VMware-SSO-Server.msi/qr ADMINPASSWORD = Hello! 2 DEPLOYMODE = FIRSTDOMAIN SSO_SITE = VCS - SSO INSTALLDIR = "D:\Program Files\VMware\Infrastructure" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log-attendre

    Personally, I'm surprised that it works, but it's cool, I'm still learning - I'll try and look a little more information about quotes, spaces and the behavior of the variables when it is passed to a cmdlet.

  • Cannot display the lightning after following the installation instructions

    I uninstalled the lightning using Add-ons or restarted Thunderbird Manager, then installed the downloaded (4.7.4, 10 Windows version). I again restarted Thunderbird and lightning appears in the Extensions, but the calendar entry in the view menu and the properties of calendar entry in the Edit menu are grayed out.

    I just found out the calendar entry in the menu tasks and events. When I clicked it, appeared the Schedule tab. I missed the statement click on that element or it wasn't in the installation instructions. In any case, my problem is solved.

Maybe you are looking for

  • Change browser.newtab.url does not work

    Hello Installed some crapware today and have trovi.com as the page by default when I open a new tab. It makes me incredibly angry. What is even worse, he has changed the browser.newtab.url and when I removed the config it STILL load the same page. I

  • Qosmio F50 - arrow signal when connected HDMI cable

    Hello I was able to connect my laptop to my LCD TV (LG LH4000) via HDMI, but all 3 ~ 5 seconds it seems to receive a signal of the up arrow.Let's say I'm reviewing some files in the windows Explorer and making the file, as if someone presses the arro

  • Boot Camp has stopped working after upgrade to Yosemite

    Hi all I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not. Issues related to the: 1. can I get it back? See some of the data below. 2. otherwise, I can create a new training cam

  • Error-2147220324

    Hello, when I try to install myRIO ('NOR myRIO USB Monitor' / "Launch the Getting Started Wizard"), I get this error and it is said as a transfer of file (FTP or WebDAV) error occurred. also seeing myRIO of State twice every few seconds. Win 7 64 bit

  • Power on my notebookpc 15-r033tx management software

    Is available the 'Power management' software for my notebookpc 15-r033tx.