T410 with availability of Windows XP Professional?

Similar Questions

• Problem with screen of Windows 7 Professional Login

  Hello

  So, normally, when I on my laptop, the login screen appears usually something like this:

  

  However, recently I went and changed it to this:

  

  It is stuck like this for a while now and I can't fix it.

  Everything is normal except for the login screen design.

  Is there any solution for this or this is supposed to happen?

  INFO:

  I'm on Windows 7 Professional and my laptop Dell, to make it work Dell services.

  Thank you.

  What you see is the part of your new authentication program that you have installed.  Probably a reader of fingerprints, facial recognition or anything else.  If you (or your administrator) do not install this, then you should remove it from the control panel or run system restore to remove it and then search for threats, because it may have been a malicious addition.

• Reference Dell 410 repaired but loaded with a fake Windows XP Professional

  After having my Dell 410 repaired, I discovered it had been loaded with a Windows XP Prof. from the false, I can't contact people who repaired (surprise) what can I do? I have my original key code but not xp disc

  Hi Trevor,

  I'm sorry to hear that you have been scammed with a fake copy of Windows XP. I suggest you to contact Microsoft customer service and check.

  Hope this information is useful.

• Limiting the number of monitor with RDP MultiMonitor, Windows 7 Professional, connect to windows 7 Enterprise SP1 VM

  Hi all

  Can we know how to limit Multimon no specific order of monitors?

  I use 4 monitors per workstation my need is 2-3 screens per session

  I tried to group policy in Active directory, but it restricts the RDP Protocol for single monitor

  I tried this information below

  http://blogs.msdn.com/b/RDS/archive/2009/07/01/using-multiple-monitors-in-remote-desktop-session.aspx

  can I'm missing something. What comments can you do on this

  Look like more people have the same problem. For each good kindly find below the link

  http://social.technet.Microsoft.com/forums/MSONLINE/en-us/06a5eaac-755b-46fd-9ef1-d148c2978049/using-a-subset-of-multiple-monitors?Forum=w7itpronetworking

• Windows 2000 Professional and X 61, X61s

  Hello

  • Anyone know if we can install and use windows 2000 Professional on a X 61/X61s (stata questions?)? Is - this dangerous (drivers, potential property damage)?
  • Some drivers are available for windows 2000 Professional. It's loaded with windows 2000 pro recovery disks in?
  • It will improve the battery life?

  Thank you.

  Hi, I had installed on my x 61 for about a year with zero problems of win2k. the reason why I went finally xp was due to new standards unavaiable on 2 k (wga, video hi-def, sdhc, etc.)

  Oh, one thing that does not work: on the card reader sdhc cards. This isn't really a big problem because lack of wga could be...

  for the sata issue I can think of two options: integrate or start in compatibility mode, install the drivers and drivers switch to sata.

  Good luck

• Receive information that all of a sudden my product key valid once for Windows XP Professional is no longer valid.

  I bought a computer ZT Club of Sam in 2009 for our church with operating system Windows XP Professional and upgrade disc optional in Windows Vista. Now, I get an error message that my Windows XP Professional software is not valid.  I entered the key to product on the side of the tower to validate online, tried to validate by phone and am unable to do so.  I need help and fast because we were preparing to assign to this computer to our Secretary financial to use next week after having bought a new computer, ZT, who will arrive Friday of next week.  I also bought the 3 years extended warranty with this computer at the time of purchase and it is supposed to be still under warranty.  We are not able to use any software installed and have misplaced the XP disk even though we have the Vista upgrade disc, but our software is not compatible, that is why we never did the upgrade.  We are a small church and cannot afford to buy Windows XP again.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Windows xp professional compatibility with card mother i5 to intel

  Hello
  I want to upgrade my pc to the card mother i5 intel. Windows xp professional compatible?

  Yes, but in order to be check secure web site of technical support from the manufacturer of the motherboard for Windows XP device drivers. If the drivers are available for download, then you know for sure that XP is compatible.

  If you have the original version of XP or a CD with a Service Pack (1 or 2) earlty, it allows to upgrade the CD with Service Pack 3 "slipstreaming".

  How to create a Windows XP SP3 slipstreamed CD
  http://www.PAGESTART.com/slipstreamsp3.html

  J W Stuart: http://www.pagestart.com

• I installed Windows XP Professional on MacBook Pro with Dell-branded OS. How can I legally activate it?

  I installed Windows XP Professional on MacBook Pro with a Windows XP CD is a Dell machine.

  I want to activate windows now, but I came to know that the Windows XP Professional license is no longer available on the market.

  Please guide me this license to purchase to activate it?

  If the Windows 7 key can activate windows XP Professional?

  I don't want to go to Windows XP Mode because we have one standard on our local network for all PC is Windows XP Professional.

  Thank you

  Khawar Pasha

  First of all - what you were doing was not a legitimate path in the first place.  The Dell OEM was probably already used on a Dell system at some point.

  Second - to activate Windows XP Professional OEM, you need a product key for Windows XP Professional OEM.  No, the Windows 7 licenses will not help you.

  Probably your only choice (and is not the best) is to locate someone sell Windows XP Professional on the Internet, find the provider that you can trust most, purchase and use of the CD and the product key you get to install.

• What is HP Scanjet Professional 3000 compatible with Windows 2000 Professional?

  is it compatible?

  Hello

  So it is a bussines unit should not be on this Forum, but I checked the spec online and found this:

  Minimum system requirements

  Microsoft® Windows® 7, Windows Vista®: processor 1.3 GHz, 1 GB of RAM (2 GB for 64 - bit); Windows® XP Home Edition, Windows® XP Professional: processor 1.3 GHz, 512 MB RAM; For all systems: 450 MB of available space on the hard drive, USB 1.1 port or higher, CD-ROM drive, SVGA 1024 x 768, 16-bit color monitor

  So that would mean "no sound is not compatible with windows 2000"

• Can I have a sytem of dual boot with Windows Vista Home Premium and Windows XP Professional?

  My laptop came preloaded with Windows Vista Edition Home Premium on the C drive.  The drive D partition contains recovery software.  I have a partition formatted f with nothing in it.  Can I install Windows XP Professional on the partiion F and have a system dual boot?  If so, how to load F installation CD when it wants to install in C?

  It is the instance of Vista installation.

  Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

  If the XP drivers are not available for your model, forget the idea.

  http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

  Read the above.

  See you soon. Mick Murphy - Microsoft partner

• 'Always available offline' missing - windows 7 Professional - sync enabled

  Hello, I have a network drive and am running windows 7 Professional.

  When I right click on the file I want to make available offline, the option does not exist.
  I also activated the Sync Center. (see image)
  Thoughts?

  I know that it is a very old message, but I had the same problem, all active and configured, but no context menu entry appears and I have found no answer on the internet to fix. Finally I have found a solution myself:

  First of all, I would like to thank Microsoft for the total absence of advanced documentation (public AND internal, knowing that the technical support engineers may not know what the problem is) on this issue.

  -No doubt - there are perhaps other special cases and the potential causes of non-showing the 'always available offline' menu. But here's my case, which was not described until I read a few pages of answers:

  I use Windows 7 and some NAS devices as file servers for our small business. We do not have any field, we work as members of the working group. We have therefore every login + password on each workstation and also separate login + password on a NAS device.

  As many users, I checked the "remember my credentials" in the login box at the connection to the NAS, for convenience.

  BUT THIS IS PREVENTING 'always available offline' TO BE DISPLAYED in THE CONTEXT MENU.

  Simply, I went to control panel / user accounts and parental controls / user accounts / manage your credentials (left pane), then selected and deleted the credentials for my NAS server.

  From then on, I have the 'always available offline' menu that appears in Solution Explorer :) But I have to type identify with my password once per session to connect to the NAS :(

  Even this link

  https://TechNet.Microsoft.com/en-us/library/cc978347.aspx

  does not mention that

  I wish someone at Microsoft could make an exhaustive list of possible causes preventing the menu appears, it would be such a relief!

• Monitors high-resolution produce unreadably small fonts in software from third-party manufacturers with Windows 7 Professional.

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Xeon E3 1226 v3 3.30 GHz 33 ° C
  Technology 22nm Haswell-WS
  RAM
  16.0 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  LENOVO SHARKBAY (SOCKET 0) 28 ° C
  Graphics
  LEN E2323swA (1920x1080@60Hz)
  LEN E2323swA (1920x1080@60Hz)
  2047 MB NVIDIA Quadro K620 (NVIDIA) 40 ° C
  Storage
  931GB Western Digital WDC WD10EZEX-08M2NA0 SCSI Disk Device (SATA) 34 ° C
  931GB TOSHIBA external USB 3.0 Flash DRIVE (USB (SATA)) 33 ° C
  29GB SanDisk Cruzer Glide peripheral USB (USB)
  Optical drives
  HL-DT-ST DVD-RAM GHC0N SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  The default resolution and "recommended" for my two monitors lenovo is 1920 x 1080. I have a new system and I tried for a few weeks now to something to work with screen resolution and third-party apps. I am under W7 Pro right now, but will soon be getting to 10.

  The high resolution is not a problem in 7 with any Microsoft stuff. With the help of a custom of the DPI setting takes care of all the native stuff. Some third-party applications can be set as well. For example, Corel Photo Paint X 7 has bars of detachable command with command icons that can be set to small, medium or large. When the size of the icon is changed, the size of the font adjusts accordingly and it is perfectly feasible, acknowledging the icons or by reading the text. It is perfect for this dual screen system and works like a charm.

  However, most of other software companies are not quite as respectful of their clients. Bryce, formerly owned by Corel, but now DAZ despicable, is not removable toolbars and there is no options available to adjust the sizes of icons in order. Even if preferences to provide an engaging, multiple monitor option not to release the toolbars or increase the font size. It only opens the Bryce "Labs" in the second monitor in a position at the end of the dialog box, half of the Cup.

  It also applies even in a top of the range of applications such as VIEW and Smith Micro, Poser Pro. They present menus and toolbar icons that are so tiny, it is necessary to use the Magnifier Microsoft to make and which isn't real solution when your work with graphics programs. It's incredibly awkward.

  My old system, running XP Pro, SP3, which I always put in place and operational, has a screen resolution of 1280 X 768, and it displays all the software of third party very well. If I try to use this resolution with W7 and these monitors high resolution, I get a crushed image down and half on the screen which is useless. I can read everything very well, but all images are short and fat! If it was possible to type values for the height and width, using an infinite scale rather than the fixed scale that is provided by the slider over, nicked in W7, it would be possible to find a combination that worked. Then, once the wreck was set for third party stuff, the custom DPI settings Windows could take care of the native stuff.

  I had an Oracle VirtualBox running for awhile and loaded the third of things out there and it worked for awhile but it did not offer the ability double screen and, in any case, after awhile it started to get really uptight and I finally just had to get rid of.

  Really, I would be much happier if I could just load XP Pro on this machine and do run as quickly as things that made to run on it. The only reason why I got a new system was the need for more speed and muscle. But if I can't use my favorite, applications worth it?

  Is there no workaround solution that will make it possible to adjust the resolution so that the third-party applications are fully functional using all the space on the screen?

  Thank you to everyone who takes the time to read and respond.

  Since no one answered I'll provide the solution myself. Doing right thing 'upgrade' to Windows 10 has this problem of resolution.

  Other than that, getting W10 to work even at halfway was a nightmare.

• Lenovo T420 with Windows 7 Professional 64 bit - Windows Genuine validation failure

  I have directly from Lenovo Lenovo T420 bought end of 2011 which began recently to show the message that its not running Genuine Windows.  He fails to pass the validation test.  He also stopped treatment of the Windows updates since December 15, 2014.  All fail with the error 800706F7.  I don't know if that is related to the failure of the validation.  I would like to get the Windows validation problem all solved first guess that they may be related.  Is attached a copy of the report full diag.  Any help would be greatly appreciated.

  Update: called Microsoft validation and validation of phone attempt to id software.  Has been informed by the agent that the product ID has been blocked by Lenovo.  Suggested I upgrade Windows, purchase a new license or call Lenovo.  Release with support from Lenovo and told me that they have no way to block a product code.  Suggested I try an upgrade of BIOS or reload the operating system.  Have you the BIOS upgrade result has not changed.  Also updated the driver Intel Rapid Storage, but again no change on the system.  Read messages where that fixed similar symptoms).  Latest report of diag is the same as that posted here. Operation of the system with the exception of the issue with the message on non-genuine software and updates of Windows does not not error code 800706F7.  Looking for more information.

  Update: 2/29/2015 KB3004394 was not as installed on this system.  I ran a system scan and it shows the following missing components. There are several entries in the CBS for the latter.  I have included only the first two entries in the newspaper here.

  2015-02-26 14:44:51, CSI 00000031 [SR] (F) component not found error: Microsoft-Windows-Security-SPP-Client, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral [gle = 0 x 80004005]
  2015-02-26 14:44:52, CSI 00000033 (F) [SR] component not found error: Microsoft-Windows-Security-SPP-Client, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral [gle = 0 x 80004005]

  Last update: after trying the suggested corrections that have failed, I did a complete system restore.  Too bad the updated Microsoft corrupted the system.  System is operating normally and is more pointed out the error of "Genuine Windows" and updates are being processed. KB3004394 is not installed.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - MV8MH - 98QJM-24367
  The Windows Product Key hash: wgci5Gdejx4esg7 ++ zTOe3LWF + 4 =.
  Windows product ID: 55041-OEM-8992671-00437
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {22F7EC30-3D0A-4976-8B56-DEBC5D4932EA} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {22F7EC30-3D0A-4976-8B56-DEBC5D4932EA}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-2436755041-OEM-8992671-004372S-1-5-21-3472518507-4194242798-1320595179LENOVO4177CTOLENOVO83ET63WW (1.33)20110729000000.000000 + 000AE573207018400FE04090409Time(GMT-05:00) Standard is03LENOVOTP-83 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700437-02-1033-7601.0000-0462011
  Installation ID: 002863102281984756058661281352504713742266826592579230
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 24367
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 25/02/2015-17:53:39

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 2:25:2015 17:28
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFgK1XXbsFu6wQC1qoEIwKrPpoucw ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP-83
  FACP LENOVO TP-83
  HPET LENOVO TP-83
  MCFG LENOVO TP-83
  SLIC LENOVO TP-83
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  CO-SUBMISSION LENOVO TP-83
  ASF!   LENOVO-TP-83
  TCPA PTL LENOVO
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  UEFI LENOVO TP-83
  UEFI LENOVO TP-83
  UEFI LENOVO TP-83

  Hello

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, you can not install Windows updates and get a non-genuine mistake. As you have mentioned that this whole issue started since 15 December, so there might be a chance that some updates to move that could cause the problem.

  The KB 3004394 which was dated December 10, 2014 update can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer. Thus, there could be a chance that this update is installed on your computer that is causing the problem.

  According to my research and findings that I got to know only after you have installed the Microsoft KB3004394 update that was released on December 10, 2014 and Microsoft has disabled since the relevant updates. Some systems also provided a Windows is "not authentic" error caused by the same update.

  So try to remove this update of the updates installed, if it is installed and hide so that it can be installed in the future of its own. You can check the link below to complete the task.

  Remove an update

  You can see the below mentioned steps to hide an update.

  1. Click on start.

  2. Now click on all programs.

  3. And then click Windows Update or Microsoft Update.

  4. Now, click on custom.

  5. Click to clear the check box next to the update KB3004394 .

  6. Expand the KB3004394 update you want to hide, and then click the checkbox "don't show me this update again".

  7. Click review and install updates.

  For more information please refer to the suggestion of José Antonio answered the February 10, 2012.

  How to hide / disable a priority update of Windows KB2633952 that already has an update on my computer?

  Additional information:

  You can see the thread mentioned below for details on the error message and the resolution.

  Get the error code Windows Update 800706f7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows 7 Professional "Sleep Mode" is not available

  Hello

  I have recently upgraded to Windows 7 Professional with a customized upgrade. But now, there is no choice to sleep in the power settings (it's just gray rather than black). It is also not available in the settings of power either. only, stop and put into hibernation. I have a laptop and find it more convenient to use the "sleep mode" when I close the lid rather than hibernation. How can I fix that it's getting boring now...
  Thanks :)

  Hello aust_09,

  Thank you for visiting the Microsoft answers community.

  This happens usually when your graphics card driver is not compatible.
  Try checking to determine which States are at your disposal:

  -Click on Start Orb > type cmd in the search box > right-click on cmd in the above results > click on run as administrator of
  -At the command prompt, type powercfg-a > press enter
  
  Read the results to determine which sleep states available

  You can also try to visit your manufacturer's website to find the correct drivers.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade my Eee PC with Windows XP to Windows 7 Professional.

  I'm trying to upgrade my Eee PC with Windows XP SP3 to Windows 7 Professional. I get an error Code: 0x80070005. Please advise... anyone?

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP