VISA ignores some commands

Similar Questions

• Is it possible to ignore some accounts during the loading of data

  Hi, I have a rules file that I use to load the data.

  I want to ignore some accounts (only for now 112123, 123453, 546567) during my loading of data.

  is there a way to do... ?

  Thanks in advance

  Check by using a rules file to perform operations on documents, fields, and data

  Rejecting Records

  You can specify which fields Essbase ignores defining criteria of rejection. Rejection criteria are string and number conditions, when met by one or more fields of a record, causes Essbase refuse registration. You can set one or more criteria of rejection. If any field in the record meets the criteria of rejection, Essbase loads the record. For example, to dismiss the actual data from a data source and load only the budget data, create a rejection criterion for rejecting the records where the first field is real.

  Concerning

  Celvin Kattookaran

• When you run the script via VMware tools when power changed, some commands in script (as a copy) has failed.

  I came across a very strange question. I tried to create some custom vmware scripting tools, such as a new .bat file. This file contains a large number of orders, mostly as copy command "copy file://\\192.168.172.5\abc.exe c:\. ». I set this file as a custom script for Script event - power on guest operating system. Everything goes well with the bat file when I tested it. But after that I changed the State of power to power on, all other commands work fine except the copy commands in the bat file. Why? How can I make it work? Of course the problem of network. And that makes me very confused.

  Hello

  First copy the files on local disk was OK.

  If this works for local disk, but not to a network drive, then hit you indeed a permissions issue any.

  But if I run the script with tools VMware service script, the commands of copy (of the remote shared folder) failed while other controls worked well. I'm quite confused.

  In fact, it is easily explained. The VMware tools service (Yes, it's a service) runs under the account Local system and by default, the local system account has no access to the network for security reasons. You can change the user of the service runs under and see if that solves your problem (very likely)

  To do this, go to computer management (right-click icon desktop, select 'Manage') and open Services and Applications, service page, locate the VMware Tools service in the list. Select properties, log on to the page tabs and change account at your own Local System account. Restart the service and it should work.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Is there a way for the iPhone to ignore some albums on ' shuffle all?

  I have a variety of albums on my iPhone, ranging from artists to the album DJ mix albums.  What I would like to know is possible you can skip albums in the shuffle all option?  For example, I DJ mix albums where each track is a separate file, so when I "shuffle all" I get a small cut of the mix.  I prefer not to have it and he only plays complete songs.  Apart from making a playlist and adding all the songs bar DJ mix ones, is possible to some songs are ignored?  I know that iTunes, you have the option of "jump when brewing" but even if you select this check box, then transfer them to the iPhone they always end by in shuffle?

  My use Shuffle All is just that, all within an album or all the music is beaten. Specific selections can be mixed, sorry.

• VISA (serial port) commands fail in VI, but working in the VISA test Panel

  Hi, I have an instrument that has a usb connection. When I connect it to a Windows 7 PC, it picks up the driver automatically and presents itself as a "USB Serial Port (COM7) (manufacturer's FTDI).»

  When I opened NI MAX, this feature appears as COM7 (ASRL7::INSTR) under "series and parallel. And when I click on open visa Test Panel and try it "* IDN?" command, it works OK.

  However, the VI (which sends just a command VISA "* IDN?") give me a timeout error (0XBFF0015) or a resource/device absent error (0XBFFF0011). A screenshot of VI is attached.

  No idea why?

  Thank you.

  PS: I went through the process to create the VISA-USB driver, who has another question, but I'm trying to understand why this happens. This device has also a GPIB port and when I use a USB-GPIB adapter, it works very well.

  N ° your first string to write sends a literal backslash and a literal n.  Your watch \n control, but it is in Normal display mode.  Change it to \codes mode and delete the extra backslash it.

  Your second string to write is set correctly for the mode \codes.

  Because the wrong string is written, the timeout error occurs and prevents the VI downstream on this same error running thread.

• The driver NI-VISA Wizard and command of the SCPI

  Hello

  I had a go with an assistant driver NI-VISA. I wanted to create a driver for MH3114 DAQ. Assistant hollow went very well, and the driver has been installed.

  However when I did * IDN? under MAX, I received an error.

  This means that I have to create/put into practice all SCPI commands?

  How the wizard is designed to work?

  Hi MimiKL,

  As Dennis said, instruments are designed to work with the SCPI commands or not. If the user guide does not indicate the device meets SCPI and SCPI commands will not work.

  The wizard of the driver simply generates a number of screws that will send the standard commands of the SCPI compliant instrument of the SCPI. Depending on how you communicate with the instrument (bus), you may need to change these screws subtly to work with different instruments. But, as mentioned, if the device you are trying to contact is not in line with SCPI then this is never going to work. Later, when you use the Assistant driver, all the subVIs generated will be have comments in them tell you exactly what to replace and change to get the driver working for your instrument.

  If your device is not in line with SCPI and you have a dll that works then you should continue to use it.

  Best regards

  Chris

• How Windows to determine which file to run with some command line commands?

  I had someone ask me an interesting question, and I really didn't have a good answer for them.  We were talking about the command prompt.  I showed them how they could start some programs simply by typing a command at the command prompt.  Their question is how is it, some files require a full path to start?  Also how the Windows does not know which file to run when the 'explorer' simple as orders are entered?

  Thanks in advance!

  Hi, Deedubbadoo,

  Their question is how is it, some files require a full path to start?

  You can have some files in the same directory that share the same file name but have different extensions. For example, you might have a file named compta.com can launch an accounting program and another called Accnt connects your system to the accounting system network.

  The operating system searches for a file by using default file name extensions in the following order of precedence: .exe, .com, .bat, and. cmd to run Accnt so that compta.com exists in the same directory, you must include the .bat extension in the command line.

  If a component of a path is a file name, it must be the last element

  Therefore: Explorer

• Access mode privilege or giving access to some commands

  We have a tunnel vpn site-to-site for various offices and we generally use taacs as user name and password, and we want to give the privilege level of access to few people. and access to only a few commands in mode privilege by using the same password Ganymede, by cli and asdm?

  You kindly help me with this

  Thnx a lot

  Please visit this link

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

  You need permission to install command.

  Kind regards

  ~ JG

  Note the useful messages

• Explanation for some commands

  Hello

  I am new to poewrcli and will work with her over the next while. Can someone explain the following for me please? If someone could put beside each line comments to explain the syntax in its entirety, it would be great. This isn't just a script, it is a mixture of different lines that I don't understand

  $folder = get-file $folderName | where {$_.name - eq $cell_id}-indicated, it's an internal thing so ignore that

  Write-host - ForegroundColor green "verification that the hosts are added by the correct format".

  ForEach ($VMhostname to ($folder |)) Get - VMHost - name $VMhost). Sorting)

  $VMhostname = [string] $VMhostname

  If (($VMhostname-eq $Esxihost) - or ($VMhostname - eq $Esxihostb))

  Write-host - ForegroundColor green $VMhostname successfully added

  Write-host $Esxihost $Esxihostb

  }

  on the other

  {

  $folder = get-file $folderName | where {$_.name - eq $cell_id}

  ForEach ($VMhostname to ($folder |)) Get - VMHost - name $VMhost). Sorting)

  {

  $hostnameedit = $VMhostname.name.split(".") [0]

  $dsname = $hostnameedit + "-local".

  Get-VMHost $VMhostname | Get-Datastore-name * | Store game data-name $dsname

  VirtualSwitch get - VMHost $VMhostname | Get-NicTeamingPolicy | Game-NicTeamingPolicy - MakeNicActive vmnic1

  }

  New-OSCustomizationSpec-name $OSCostumSpec_VC - Windows - $VMPassword AdminPassword OSType - zone ProductKey - $WinProductKey_VC - ChangeSid - OrgName $OrgName - NamingScheme $TimeZone fixed NamingPrefix - $VCVM.split(".") [0] - fullname administrator - workgroup WORKGROUP

  $folder = get-file $folderName | where {$_.name - eq $cell_id}

  ForEach ($VMName to ($folder |)) Get - VM - name $VMMac). where {$_.} PowerState - eq "PoweredOff"} | Sorting)

  {

  Start-VM - $VMName VM - confirm: $false

  Commands PowerCLI and PowerShell can be read as the English text. For example, the Get-application cmdlet retrieves one or more folders. Comment in a script can be started with the sign #. I'll give comment to each line of the first time it occurs.

  # Recover a folder with the name $cell.id and put it in the $folder variable. Can be written more short as:

  # $folder = get-file-name $cell_id

  $folder = get-file $folderName | where {$_.name - eq $cell_id}-indicated, it's an internal thing so ignore that

  # Write a line to the console in green color.

  Write-host - ForegroundColor green "verification that the hosts are added by the correct format".

  # Retrieve the ESXi host with the name $VMHost in the $folder folder, sort hosts based on the names and put one up for a # in the $VMHostName variable. In this example, the variable $VMHostName contains VMHost and not the name of the host objects #. If you want to get the names, you must use:

  # ForEach ($VMhostname to ($folder |)) Get - VMHost - name $VMhost). Sort-Object. Select-Object - ExpandProperty name)

  ForEach ($VMhostname to ($folder |)) Get - VMHost - name $VMhost). Sorting)

  # Make sure that $VMHostName is a string by using the [channel] type conversion

  $VMhostname = [string] $VMhostname

  # Compare $VMHostName with $Esxihost or $Esxihostb

  If (($VMhostname-eq $Esxihost) - or ($VMhostname - eq $Esxihostb))

  {

  # Do this part if the result from the previous comparison is $true

  Write-host - ForegroundColor green $VMhostname successfully added

  Write-host $Esxihost $Esxihostb

  }

  on the other

  {

  # Do this part if the result from the previous comparison is $false

  $folder = get-file $folderName | where {$_.name - eq $cell_id}

  ForEach ($VMhostname to ($folder |)) Get - VMHost - name $VMhost). Sorting)

  {

  # Splits the string in the variable $VMhostname in the points and take the first piece.

  $hostnameedit = $VMhostname.name.split(".") [0]

  # Add two strings

  $dsname = $hostnameedit + "-local".

  # A data store to a new name

  Get-VMHost $VMhostname | Get-Datastore-name * | Store game data-name $dsname

  # Put the NIC teaming policy and make vmnic1 active NETWORK card

  VirtualSwitch get - VMHost $VMhostname | Get-NicTeamingPolicy | Game-NicTeamingPolicy - MakeNicActive vmnic1

  }

  # Create a new OSCustomizationSpec

  New-OSCustomizationSpec-name $OSCostumSpec_VC - Windows - $VMPassword AdminPassword OSType - zone ProductKey - $WinProductKey_VC - ChangeSid - OrgName $OrgName - NamingScheme $TimeZone fixed NamingPrefix - $VCVM.split(".") [0] - fullname administrator - workgroup WORKGROUP

  $folder = get-file $folderName | where {$_.name - eq $cell_id}

  # Retrieve the virtual machines that are powered to folder $folder and sorting them based on the names.

  ForEach ($VMName to ($folder |)) Get - VM - name $VMMac). where {$_.} PowerState - eq "PoweredOff"} | Sorting)

  {

  # Start a virtual machine with the name of $VMName and do not ask for confirmation

  Start-VM - $VMName VM - confirm: $false

• I've set up an image processor in Photoshop and is to ignore some jpg files - can I batch convert convert these files to make them compatible?

  I have a number of jpg files in a folder that I am running a custom action on.

  It works very well for some files, but it completely ignores the others. Even if some of the ignored files are JPG files, I think they could be another type of jpg file, and that's why Adobe is ignorant.

  Is it possible for me to batch convert all these files, be it through Photoshop or another program, in a PS compatible files so that the image processor will treat?

  Thank you!

  The preference file may be corrupted, try to reset as mentioned above.

  Except that the only thing comes to mind is he thinks the file is a duplicate one ignores. But that's just a guess.

• root access to some commands crsctl

  The GI Version: 11.2.0.3
  Platform: Red Hat Enterprise Linux 5.8
  
  
  Most of the commands of crsctl can be run while connected as a network user. But some of the crsctl commands as below to be executed while connected as user root.
  

  $ crsctl start cluster -n sdasher199
  CRS-4563: Insufficient user privileges.
  
  CRS-4000: Command Start failed, or completed with errors.

  What type crsctl commands must be run as root? Is there a list or is there a way to identify?

  That's as close as I've seen... it tells you what commands require root:

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16794/crsref.htm

• Organize some commands will not work

  Help, please! These commands are essential to the way I work in Illustrator - probably for you too. Keyboard shortcut for arrange, object - send to back, to Front, etc.. None of these commands will run. What I am doing wrong?

  I can drag the layers in the layers panel, but does not work orders reorganize no matter where I call them-the object on the top menu, right click on the object itself, or the way the more useful, keyboard shortcuts: CTRL + SHIFT + [etc.

  I do not use transparent traces, no paint, no groups. I'm in Normal shooting mode.

  For what it's worth, the Select commands run perfectly well. CTL + ALT + [or CTL + ALT +] no problem with one of these.

  I use the default keyboard shortcuts.

  Win 7 Pro 64 bit, Prem CS5.5 Prod. No difficulty in CS4...

  Thank you.

  [EDIT: reset preferences (moved AIPrefs, restart) but it did not help.]

  This is what I think and not you angry against me because I think that this is a user error.

  I think that you think that you can select an object on a layer and send it to the back and some how is behind a layer that is below the layer that lies in the object.

  It works that way.

  It will send it only in the back of the objects in the active layer also applies if you want to come forward, he will come only at the front of the objects in the active layer.

  I ask it is the error of the user and it works very well and there is no need to reinstall.

  Now obviously I can be wong on this subject if you wrote something that indicates that it is the case.

  If you understand how it works and that's another problem then you have a software conflict on your computer can be anything from a police, recent update, new application or public service or even some strange setting in another application.

  But the reason for which no answer is no one can figure out how to operate not so that they could not help. But I read your message several times and realized what I think the problem.

• ITunes ignores some of my photos when importing

  I do the work of professional photography for some clients, and each day I import dozens of photos in the library of the ipad using wifi sync. Sometimes (rare), some of the pictures simply do not do in the ipad for some reason any.

  Today, I noticed that a specific folder has 7 photos inside, but when I sync, only 3 of these pictures go to the ipad. The four others he'll never no matter what I try. The photos are all a good size (not too big), came from the same camera, same treatment, even resize, but for some reason, these 4 photos will not enter the ipad.

  I also noticed during the synchronization, the progress on the upper bar goes «copy photo 1 of 7...» 2 of 7... 3 of 7... "and then all of a sudden it ends, without even trying to copy the last 4 pictures. This happens in wifi and wired sync.

  I always get the photos by uploading to dropbox and then by downloading on the ipad, but it's a slow process.

  This could be the cause? It feels really frustrating because now I have to double check each photo to make sure it happened.

  Apparently, I found myself a solution:

  ITunes does not seem to work well with my 750 Intel pci-e SSD. I recently changed my OS to a conventional Sata SSD and now itunes seems to be able to get all the photos on the ipad, have not seen a single failure so far.

  I suggest that Apple looks at such things, Pci-e SSDS are more popular and I think that there is an incompatibility with itunes and files when you use this type of drive.

• When printing it ignores some parag

  When printing something from windows XP my HP photosmart C4780 lack some paragraphs and a few lines as the same area on each page.

  Certainly a hardware problem with your printer.  You can try the steps of troubleshooting here, but your printer may require repair/maintenance / replacement--> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01675472&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3794615#N68

• Ignoring some notifications of rule

  Hello
  What is the best way to ignore certain notifications. We have a couple of servers that are fireing the rule "VMW Virtual Machine logical drive using" on the disk that is not relevant. How can I exclude this virtual machine and alerts drive?
  Kind regards
  Tom

  The rule may be limited as to completely exclude a virtual machine or a single disc of VMs.
  As Dave pointed out, it is best to copy the rule and disable the original/activate the copy.
  To entirely exclude the virtual machine, you can just broadens its scope as follows:
  VMWVirtualMachineLogicalDisk where (virtualMachine.managedObjectReference! = "vm-xxxx")
  To find your ID moref of virtual machines, follow these steps:
  in the web console vFoglight, go to the tray on the left under the dashboard and expand Administration > tools > Script Editor.
  In the "Script" box, paste the script below:
  TS = server.get("TopologyService");
  Ty = ts.getType("VMWVirtualMachine");
  DS = ts.getObjectsOfType (ty);
  name = "";
  DS.each {computer->}
  appoints += it.get ('name') + ' ' + it.get ("managedObjectReference") + "\r\n";
  }
  return the names;
  It will return the items as:
  LM-SCOM-DW2-vm-38422
  (the red point is the moref for the virtual machine)
  You can then get the managedObjectReference for the particular virtual machine and add it to the scope (vm-xxxx).
  Option 2:
  To exclude only a specific drive to a virtual machine:
  VMWVirtualMachineLogicalDisk where (topologyObjectId! = "xxxx")
  Drive your virtual machine has a TopologyObjectID are assigned and which does not change. So excluding this ID in the field above will allow the rule to shoot all the drive except this one.
  How to proceed:
  1: need to find the ID for this particular drive
  2: change the scope of the rule to exclude the object (as in the example above)
  To find the ID of TopologyObject, in the web console vFoglight going on the set on the left under the dashboard and expand Administration > tools > Script Editor.
  In the "Script" box, paste the script below:
  TS = server.get("TopologyService");
  Ty = ts.getType("VMWVirtualMachineLogicalDisk");
  DS = ts.getObjectsOfType (ty);
  name = "";
  DS.each {computer->}
  "appoints += it.get("virtualMachine").get ("name") +" "+ it.get ('name') + ' ' + it.get ("topologyObjectId") + ' \r\n ';
  }
  return the names;
  This will return the list of virtual machines with the drive name and topologyObjectId as follows:
  LM-TestMachine D:\ 20369
  LM-TestMachine F:\ 20371
  LM-TestMachine C:\ 20367
  You can do a search in the browser window to find the name of your virtual machine to make it more quickly because it goes to a list of all virtual machines and their readers.
  When you find the reader looking for copy the topologyObjectId which is the number at the end (for example...) LM-TestMachine D:\ 20369)
  When you get that go to the plateau left and again under the dashboard and directors develop rules & Notifications > manage rules. 'Filter by rule name', enter 'logic' (w/o "") and then click the rule of VMW Virtual Machine, use of logical disk.
  Once it opens, click on the tab 'Definition of the rule', in the 'Field of application of the rule' box, you'll add the following (like at the top):
  VMWVirtualMachineLogicalDisk where (topologyObjectId! = "xxxx")
  The "xxxx" is of course the value you obtained for the topologyObjectId readers. Once it is in place, click the green check mark to evaluate the query scope.
  
  HTH!
  -Larry