T420 (4180 - 1 G 8): problem with VGA output for external monitor

Similar Questions

• Problem with VGA output via CDM on XPS 12

  When I connect my XPS 12 via a mini display to VGA to an external monitor, there is no problem. This changes however when I connect it to a beamer/projector. Then it is af if my laptop does not recognize that and I just cannot make it work. When I test the card on my macbook to friends, it does not work.

  Do I need a special for this or is my laptop VGA adapter broken?

  On Windows 7 or 8, I recommend trying the following:

  -Hold down the Windows key and then press the button P to scroll through the choices of the external display

  -First try the only projector choice and test it with Extend or duplicate

  If that does not solve the problem, I do it with the following:

  -Open Intel graphics and Media Control Panel (located in your Control Panel or system tray)

  -Go in the multiple views section and make sure that the mode of operation is not defined for a simple screen

  -   Active displays should show the total number of exits is connected as well (ex: 2 = integrated display + monitor)

  If these two options do not work, you should remove your graphics driver and do a clean install of the latest graphics driver from the Dell support site.

  Kind regards

  -EE

• Problem with the driver for the monitor (HP Mini)

  Hey, I'm new here, I searched this forum, but I have found a solution to my problem.

  HP Mini 210-3000 sv, I bought about half a year ago and because my Windows is in Greek and I did not understand a Word, I have re-installed Windows. I am currently with Home Premium 32-bit, if it's important. My problem is that in the monitor drivers that I don't have another generic PnP monitor, but it makes my computer slow and uses a lot of memory RAM and I remember that before reinstall, there was another monitor driver, but I don't remember the name, and now I can't find - or in HP support (it is said that my model does not yet exist) , or an internet forum... I installed the latest graphics drivers from HP (Intel Graphics Media Accelerator 3150, the newest) site, but I'm really confused because there is no place I can find tells me which driver is good for my monitor and I have big problems. Sometimes Windows says I have problems with graphics, that close and reopen again. Can someone help me, please?

  Thank you!

  Download and install the latest chipset driver Intel here.

  Restart the system.

  Uninstall the Intel graphics driver (if it has been installed).

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver HP Intel graphics from here.

  Restart the system and check the result.

• I have a problem with my password for my MSN account.

  I'm having a problem with my password for Windows Live.  It does not recognize the sensitive passwords case.  I asked cela before and you refered me to Windows Live.  And I give them credit.  They tried several times to fix my problem and failed.  Then they refered back me to you.  And guess what, you refered me to Windows Live.  I'm stuck in limbo between you two.  CAN SOMEONE HELP ME WITH MY PROBLEM PLEASE?  PLEASE...  PRETTY PLEASE...

  This is a forum for issues relating to security, privacy and user for the Windows XP operating system accounts.

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

• There is a problem with the driver for Canon PowerShot SD1200 IS. The driver must be reinstalled.

  There is a problem with the driver for Canon PowerShot SD1200 IS. The pilot
  must be reinstalled.

  Gerald

  To allow us to help you better, please provide as much detail as possible about the problem you are experiencing.

  
  If you design your question effectively, you can get good information from people who are familiar with the subject and who are happy to help you.

  Prepare your question. He thinks through. Hasty-survey questions get hasty responses, or none at all.

  What diagnosis have so far

  An effective question you will get help read faster how here

  Suggestions for asking for help on a site.
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  BTW, I see you have cross posted this on Technet

  http://social.technet.Microsoft.com/forums/Windows/en-us/a1bd86f2-6914-4cda-9e34-1e3abb75a33c/Canon-PowerShot-SD1200-is?Forum=tnfeedback

• Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

  There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of corrupted audio driver or settings.

  I suggest you run this Microsoft fixit and verify.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

  To uninstall the driver, please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

  b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

  c. restart the computer.

  Now, reinstall the drivers from the computer manufacturer's website and check the.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• There is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. The driver must be reinstalled.

  Hello
  With the help of the window - 8 installed on newly purchased Dell Inspiron notebook
  For a few days, I wasn't able to use my CD DVD drive because there is a driver problem, here's the trouble shoot report
  could someone help me how this issue be resolved
  TSSTcorp DVD +-RW Drive SN - 208BB has a driver problem fixed is not fixed
   
  There is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. The driver must be reinstalled.
  Information InformationalDevice
  Name: TSSTcorp DVD +-RW Drive SN-208BB
  ID: SCSI\CDROM & VEN_TSSTCORP & PROD_DVD +-RW_SN-208BB\4 & BB94CF & 0 & 040000
  Error code: 19
   
  Reinstall the complete device driver
   
  There is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. Reinstall the driver may resolve this issue.
   

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

• There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled error code 39.

  HP Pavilion 17 laptop

  There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.

  OT: Driver help

  Name:	PCIe Ralink Bluetooth adapter

  Error code:	39

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  What is the number of full model of the laptop?

  39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Depending on your mobilde device you must first unlock the developer settings in order to test the AIR apps on it.

  Where to find these settings depends on your specific device.

• Problem with analytical function for date

  Hi all
  
  ORCL worm:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  "CORE 11.2.0.2.0 Production."
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  I have a problem with the analtical for the date function. I'm trying to group records based on timestamp, but I'm failing to do.
  Could you please help me find where I'm missing.
  

  This is the subquery. No issue with this. I'm just posting it for reference. 
  select sum(disclosed_cost_allocation.to_be_paid_amt) amt,
      substr(reference_data.ref_code,4,10) cd,
      to_char(external_order_status.status_updated_tmstp, 'DD-MON-YYYY HH24:MI:SS') tmstp,
      DISCLOSED_CLOSING_COST.DISCLOSED_CLOSING_COST_ID id
    FROM Deal.Fee_Mapping_Definition ,
      Deal.Fee_Index_Definition ,
      Deal.Fee_Closing_Cost_Item,
      Deal.Closing_Cost,
      Deal.Document_Generation_Request,
      deal.PRODUCT_REQUEST,
      deal.External_Order_Request,
      deal.External_Order_Status,
      deal. DISCLOSED_CLOSING_COST,
      deal.DISCLOSED_COST_ALLOCATION,
      deal.reference_data
    WHERE Fee_Mapping_Definition.Fee_Code                    = Fee_Index_Definition.Fee_Code
    AND Fee_Index_Definition.Fee_Index_Definition_Id         = Fee_Closing_Cost_Item.Fee_Index_Definition_Id
    AND Fee_Closing_Cost_Item.Closing_Cost_Id                = Closing_Cost.Closing_Cost_Id
    AND CLOSING_COST.PRODUCT_REQUEST_ID                      = Document_Generation_Request.Product_Request_Id
    AND closing_cost.product_request_id                      = product_request.product_request_id
    AND Product_Request.Deal_Id                              = External_Order_Request.Deal_Id
    AND external_order_request.external_order_request_id     = external_order_status.external_order_request_id
    AND external_order_request.external_order_request_id     = disclosed_closing_cost.external_order_request_id
    AND DISCLOSED_CLOSING_COST. DISCLOSED_CLOSING_COST_ID    = DISCLOSED_COST_ALLOCATION.DISCLOSED_CLOSING_COST_ID
    AND Fee_Index_Definition.Fee_Index_Definition_Id         = Disclosed_Closing_Cost.Fee_Index_Definition_Id
    AND Fee_Mapping_Definition.Document_Line_Series_Ref_Id   = Reference_Data.Reference_Data_Id
    AND Document_Generation_Request.Document_Package_Ref_Id IN (7392 ,2209 )
    AND External_Order_Status.Order_Status_Txt               = ('GenerationCompleted')
    AND Fee_Mapping_Definition.Document_Line_Series_Ref_Id  IN ( 7789, 7788,7596 )
    AND FEE_MAPPING_DEFINITION.DOCUMENT_TYPE_REF_ID          = 1099
    AND Document_Generation_Request.Product_Request_Id      IN
      (SELECT PRODUCT_REQUEST.PRODUCT_REQUEST_id
      FROM Deal.Disclosed_Cost_Allocation,
        Deal.Disclosed_Closing_Cost,
        DEAL.External_Order_Request,
        DEAL.PRODUCT_REQUEST,
        Deal.Scenario
      WHERE Disclosed_Cost_Allocation.Disclosed_Closing_Cost_Id = Disclosed_Closing_Cost.Disclosed_Closing_Cost_Id
      AND Disclosed_Closing_Cost.External_Order_Request_Id      = External_Order_Request.External_Order_Request_Id
      AND External_Order_Request.Deal_Id                        = Product_Request.Deal_Id
      AND product_request.scenario_id                           = scenario.scenario_id
      AND SCENARIO.SCENARIO_STATUS_TYPE_REF_ID                  = 7206
      AND product_request.servicing_loan_acct_num              IS NOT NULL
      AND product_request.servicing_loan_acct_num               = 0017498379
        --AND Disclosed_Cost_Allocation.Disclosed_Cost_Allocation_Id = 5095263
      )
    GROUP BY DISCLOSED_CLOSING_COST.DISCLOSED_CLOSING_COST_ID,
      External_Order_Status.Status_Updated_Tmstp,
      Reference_Data.Ref_Code,
      disclosed_cost_allocation.to_be_paid_amt
    order by 3 desc,
      1 DESC;
  
  Result:
  2000     1304-1399     28-JUL-2012 19:49:47     6880959
  312     1302     28-JUL-2012 19:49:47     6880958
  76     1303     28-JUL-2012 19:49:47     6880957
  2000     1304-1399     28-JUL-2012 18:02:16     6880539
  312     1302     28-JUL-2012 18:02:16     6880538
  76     1303     28-JUL-2012 18:02:16     6880537
  
  
  But, when I try to group the timestamp using analytical function,
  
  
  select amt 
          ,cd 
          ,rank() over(partition by tmstp order by tmstp desc) rn 
  from 
  (select sum(disclosed_cost_allocation.to_be_paid_amt) amt,
      substr(reference_data.ref_code,4,10) cd,
      to_char(external_order_status.status_updated_tmstp, 'DD-MON-YYYY HH24:MI:SS') tmstp,
      DISCLOSED_CLOSING_COST.DISCLOSED_CLOSING_COST_ID id
    FROM Deal.Fee_Mapping_Definition ,
      Deal.Fee_Index_Definition ,
      Deal.Fee_Closing_Cost_Item,
      Deal.Closing_Cost,
      Deal.Document_Generation_Request,
      deal.PRODUCT_REQUEST,
      deal.External_Order_Request,
      deal.External_Order_Status,
      deal. DISCLOSED_CLOSING_COST,
      deal.DISCLOSED_COST_ALLOCATION,
      deal.reference_data
    WHERE Fee_Mapping_Definition.Fee_Code                    = Fee_Index_Definition.Fee_Code
    AND Fee_Index_Definition.Fee_Index_Definition_Id         = Fee_Closing_Cost_Item.Fee_Index_Definition_Id
    AND Fee_Closing_Cost_Item.Closing_Cost_Id                = Closing_Cost.Closing_Cost_Id
    AND CLOSING_COST.PRODUCT_REQUEST_ID                      = Document_Generation_Request.Product_Request_Id
    AND closing_cost.product_request_id                      = product_request.product_request_id
    AND Product_Request.Deal_Id                              = External_Order_Request.Deal_Id
    AND external_order_request.external_order_request_id     = external_order_status.external_order_request_id
    AND external_order_request.external_order_request_id     = disclosed_closing_cost.external_order_request_id
    AND DISCLOSED_CLOSING_COST. DISCLOSED_CLOSING_COST_ID    = DISCLOSED_COST_ALLOCATION.DISCLOSED_CLOSING_COST_ID
    AND Fee_Index_Definition.Fee_Index_Definition_Id         = Disclosed_Closing_Cost.Fee_Index_Definition_Id
    AND Fee_Mapping_Definition.Document_Line_Series_Ref_Id   = Reference_Data.Reference_Data_Id
    AND Document_Generation_Request.Document_Package_Ref_Id IN (7392 ,2209 )
    AND External_Order_Status.Order_Status_Txt               = ('GenerationCompleted')
    AND Fee_Mapping_Definition.Document_Line_Series_Ref_Id  IN ( 7789, 7788,7596 )
    AND FEE_MAPPING_DEFINITION.DOCUMENT_TYPE_REF_ID          = 1099
    AND Document_Generation_Request.Product_Request_Id      IN
      (SELECT PRODUCT_REQUEST.PRODUCT_REQUEST_id
      FROM Deal.Disclosed_Cost_Allocation,
        Deal.Disclosed_Closing_Cost,
        DEAL.External_Order_Request,
        DEAL.PRODUCT_REQUEST,
        Deal.Scenario
      WHERE Disclosed_Cost_Allocation.Disclosed_Closing_Cost_Id = Disclosed_Closing_Cost.Disclosed_Closing_Cost_Id
      AND Disclosed_Closing_Cost.External_Order_Request_Id      = External_Order_Request.External_Order_Request_Id
      AND External_Order_Request.Deal_Id                        = Product_Request.Deal_Id
      AND product_request.scenario_id                           = scenario.scenario_id
      AND SCENARIO.SCENARIO_STATUS_TYPE_REF_ID                  = 7206
      AND product_request.servicing_loan_acct_num              IS NOT NULL
      AND product_request.servicing_loan_acct_num               = 0017498379
        --AND Disclosed_Cost_Allocation.Disclosed_Cost_Allocation_Id = 5095263
      )
    GROUP BY DISCLOSED_CLOSING_COST.DISCLOSED_CLOSING_COST_ID,
      External_Order_Status.Status_Updated_Tmstp,
      Reference_Data.Ref_Code,
      disclosed_cost_allocation.to_be_paid_amt
    order by 3 desc,
      1 DESC);
  
  Result:
  312     1302            1
  2000     1304-1399     1
  76     1303            1
  312     1302            1
  2000     1304-1399     1
  76     1303            1 
  
  
  Required output:
  312     1302            1
  2000     1304-1399     1
  76     1303            1
  312     1302            2
  2000     1304-1399     2
  76     1303            2

  THX
  Rod.

  Hey, Rod,

  My guess is that you want:

  , dense_rank () over (order by  tmstp  desc)  AS rn 
  

  RANK means you'll jump numbers when there is a link. For example, if all 3 rows have the exact same last tmstp, all 3 rows would be assigned number 1, GRADE would assign 4 to the next line, but DENSE_RANK attributes 2.

  "PARTITION x" means that you are looking for a separate series of numbers (starting with 1) for each value of x. If you want just a series of numbers for the entire result set, then do not use a PARTITION BY clause at all. (PARTITION BY is never required.)
  Maybe you want to PARTITIONNER IN cd. I can't do it without some examples of data, as well as an explanation of why you want the results of these data.
  You certainly don't want to PARTITION you BY the same expression ORDER BY; It simply means that all the lines are tied for #1.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Simplify the problem as much as possible.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  Published by: Frank Kulash, August 1, 2012 13:20