Problem with VGA output via CDM on XPS 12

Similar Questions

• T420 (4180 - 1 G 8): problem with VGA output for external monitor

  
  

  Followed by:

  I tried the latest driver Intel "generic" after you completely uninstall the device from Device Manager driver: without success.

  I tried a different monitor from another manufacturer: no chance.

  To remove the device driver as a cause as possible, I tried to boot from a boot Unbuntu CD: no chance.

  I activated the home screen on the VGA port in BIOS: screen stays black.

  I suspect that the VGA on my new Lenovo Thinkpad T420 port just does not at all.

  I opened a call with my material support.

  Kind regards

  Stéphane B.

• Problem with VGA card after Windows Update

  Hi all.

  Today I start to address a problem with me second VGA card (Matrox G200 G2 + / QUADP-PL/7) after a yesterday updated windows.
  I am able to see the other 4 monitors, but with a yellow triangle.
  You thing has remove updates yesterday going to solve my problem?

  PS:If you have an another idea is welcome

  Thank you and best regards.

  Hello

  Please contact Microsoft Community.

  This problem may occur if the VGA card drivers are updated after the installation of Windows updates. I suggest to follow the steps below and check to see if problem persists.

  1. Click Start and stop in the search box, type Device Manager.
  2. On top, on the start menu, click on "Device Manager".
  3. In "Device Manager", double click "Graphics card" expand. "."
  4. Click on "display Matrox G200 G2 + / QUADP-PL/7 ' and click 'properties '.
  5. In properties, click on the "Drivers" tab and check if the option 'Return to the version' is 'active '. If so click on "Roll back" to restore the previous version driver.

  Note: If "Roll back" is greyed out, then see the article restoration of the system;

  Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: try to restore your system to an earlier date when everything worked correctly.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Meet us, then we can help you further.

• Problems with HSRP output

  Hello dear!

  I have the following topology:

  Cisco 3845 gi0/0 - switch Foundry - fa0/0 Cisco 7206VXR

  CISCO 3845 *.

  interface GigabitEthernet0/0
  IP 192.168.80.90 255.255.255.128
  no ip proxy-arp
  IP accounting output-packets
  full duplex
  Speed 100
  media type rj45
  standby 2 ip 192.168.80.89
  standby priority 2 130
  LAN service-policy input

  CISCO 7206 *.

  interface FastEthernet0/0
  IP 192.168.80.91 255.255.255.128
  no ip proxy-arp
  Summary-address eigrp 100 IP 172.31.255.0 255.255.255.0 5
  full duplex
  Speed 100
  No cdp enable
  standby 2 ip 192.168.80.89
  standby priority 2 150
  2 standby preempt delay minimum 60
  standby 2 track Serial6/0 80
  LAN service-policy input

  This devices run HSRP, but I been out following diagnosis in two routers using 'show Eve '.

  See the day before

  Cisco 3845 *.

  FastEthernet0/0 - group 2
  The State is active
  2 state changes, last state change 5w6d
  Virtual IP address is 192.168.80.89
  Active virtual MAC address is 0000.0c07.ac02
  Local virtual MAC address is 0000.0c07.ac02 (the default value of the v1)
  Hello time 3 sec, hold time 10 sec
  Next Hello sent to 1.488 seconds
  Enabled, preemption delay dry 60 min
  Active router is local
  Standby router is unknown?
  Priority 150 (150 configured)
  Follow the State of Serial6/0 interface Up decrement 80
  The name of IP redundancy is 'hsrp-Fa0/0-2' (default)

  See the day before

  Cisco 7206VXR *.

  GigabitEthernet0/0 - group 2
  The State is Init (interface to the bottom)
  Virtual IP address is 192.168.80.89
  Active virtual MAC address is unknown
  Local virtual MAC address is 0000.0c07.ac02 (the default value of the v1)
  Hello time 3 sec, hold time 10 sec
  Pre-emption turned off
  Active router is unknown?
  Standby router is unknown?
  Priority 130 (130 configured)
  The group name is "hsrp-Gi0/0-2" (default)

  I can ping to both devices using the virtual ip address.
  The work around to solve the lines ' active router is unknown and standby router is unknown "are remove the hsrp configuration in the watch system, after the issue is resolved, but came on after a few days.
  The problem is that I have not access to the Foundry switch but I think that HSRP configuration have no problem, even in the buffer, I did not see any problem with HSRP.

  Someone have similar problem or any idea?

  Thank you more

  Hello

  I would try

  (a) using HSRP worm 2 (see http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp_ps6922_TSD_Products_Configuration_Guide_Chapter.html#wp1102891 )

  (b) looks a little stange me have first refusal configured on a router only.

  (c) there could be some problems with your multicasts to send/receive of Foundry switch used by HSRP?

  HTH,

  Milan

• Problem with analog output card FPGA 7851R

  Hi all

  First of all, I am a beginner in FPGA programming.

  In my application, I'm generating an analog voltage, for example 6V in a FPGA 7851R card is placed in 1033 PXI. I'm passing this tension to an another PXI with LabVIEW RT. Instead of getting a continuous 6V I'm getting some spikes with 6V. I enclose the screenshot of waveform which has obtained in PXI with RT the PXI card used is PXI-4462. I also enclose the code. Why am I getting this ears? Will there be another procedure to generate a continuous signal? Is there any problem with the acquisition?

  Please help me

  Thank you & best regards

  Rajesh R. Nair

  Thanks sumit.

  Problem is solved!

• Satellite A210 - ATI Radeon HD2600-problem with the TV via S-video connection

  I tried to connect my Toshiba laptop with TV (Philips LCD) via S-video, but TV was unable to detect the video signal from the laptop.
  I also tried to use a connection SCART TV through the reduction, but photo was the only black and white, no color.
  Last possibility is reduction use S-video to RCA yellow, but how do you know... But I really prefer to use 'pure's-video.

  I followed the step the manufacturer ATI and TV guide (first plug the cables, then switch TV, turn to the right in the TV menu, then the mobile source on, activation of TV as a secondary device (I have to force it, autodetect found nothing), press Fn + F5 (thing) and... nothing, black TV.)

  Where could be the problem?
  Cable seems OK, TV should support s-video and I get the right output in TV, I send the PAL signal...
  Maybe something with the Catalyst Control Center, I doubt.

  Can anyone help?

  Thank you very much.

  You use the Vista... Is this good?

  If so, the ATI Catalyst provides the TV option that must be activated.

  You should have an ATI Catalyst icon in the taskbar. Double-click on this icon.
  Then choose Advanced settings (second option).

  In the display options (Display manager) below, you will find the TV Force recognition option.
  Please check this option.

  Then reconnect the TV and try to use the FN + F5 key combination to switch to the TV.

• Strange problem with analog output PCI 6251 and BNC-2110

  I'm controlling current source of third parties using the connectors of analog output on my card PCI 6251 and BNC-2110.

  The current source needs an input signal of 0.1V. I tested it using a battery, the potentiometer and the voltmeter, and by manually adjusting the voltage of power current works - current output with control voltage scales according to the specifications and is relatively stable.

  The data acquisition card works too - when I connect a voltmeter to the AO0 AO1, the measured voltage corresponds to the target with great precision value.

  But when I connect the current source of third AO0 AO1 data acquisition card, the measured output voltage drops and fluctuates. This applies to both channels of the AO.

  I wonder what is the problem here. I suspect it could be a matter of the grounding - the current analog control of the source is an entry with two floating terminals differential. I tried to return the switches FS/GS on the BNC-2110, but that makes no difference.

  Anyone knows similar behavior? Does anyone have any suggestions?

  
  

• Problems with HDMI output

  I have a HP G61 Notebook PC with windows 7 Home premium

  When I plug the HDMI cable into the laptop and connect it to display the output of the speakers or headphone stops. The bars of output on the mixer vloume display output from the HDMI device, but nothing independent headsets and headphones or speakers.

  What is the case can someone help?

  OK problem solved. I typed sound in the search on windows 7. Then went to the HDMI audio output and off the exit. I hope this helps someone the with this problem

• Problem with VPN connection via a wireless card broadband Verizon Cisco VPN air

  I can't access any device on my network via RDP or applications via the host file - forwarded servers from my 64 bit Windows 7 laptop using wireless broadband Verizon and customer VPN Cisco 64 bit 5.0.7.290. I can connect easily via a LAN wired connection from home using the same laptop computer and client VPN and RDP.

  The VPN client connects to the server VPN (easy VPN on Cisco 2821 router) on the broadband wireless connection (I can see it in the GPMC on the router) but it will pass no data. I can't ping anything in the field, or external IP address. When I try to ping the laptop, it drops off the VPN (completed peer connection).

  The laptop is a Dell M4500 running Windows 7 Ultimate 64 bit OS. The VPN client is stated, rev 5.0.7.290. The card internal wireless broadband is a QualCom 5620 (EV-DO-HSPA) system (Gobi 2).

  What must I do to get this configuration to perform and log as does the wired connection?

  Tim Carlisle

  The Systems Manager

  Post edited by: Timothy Carlisle recently I discovered that the Cisco 64 bit client VPN running on my Dell Precision M6500 (Windows 7 64-bit OS) was able to connect properly using the WiFi on my iPhone 4S (Verizon Wireless). It will also connect when attached to the laptop via a USB cable. Once I discovered this, I was then able to do the same thing on the laptop that spawned this discussion, by attachment for Blackberry "BOLD" from the boss after the download and installation of a new Verizon Wireless Access Manager utility that has allowed to select the device (Blackberry) for installation.  I think that enabled us to bypass the wireless cards Gobi2 on two laptops and the factory installed Dell Connection Manager software which was not compatible with the Cisco VPN 64 bit client software. As much as I fear here, this new method (hotspot of Smartphone and attachment) is the way to go for us and has solved all the problems of connectivity distance for us. Thank you to all who have contributed to this discussion.   Tim Carlisle

  The Solution to the debate has been captured in this Document: -.

  https://supportforums.Cisco.com/docs/doc-18721

  We fought with the same question for quite awhile before finding that there seems to be a default setting in the Verizon Access Manager software that plays well with the Cisco Client.

  In VZAccess Manager, select Options | Preferences.  Connectivity options, the default setting for "NDIS Mode - connect manually" was chosen.  Change this option to "Modem Mode - connect manually" seems to have completely addressed the issue.  We can now connect to the WWAN, establish a Cisco VPN session and have connectivity.

  

• Problem with purchase Lightromm via CC

  Hi guys,.

  I don't know why I couldn't buy Lightroom via Creative Cloud. I live in England, in my address is the Poland, and maybe that's the main problem. do you know how I can change it and which can be a problem real and shopping?

  Kind regards

  KwQ

  Follow the steps in the link below to change the country of your Adobe ID

  Change the country associated with your Adobe ID

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Problems with sending photos via outlook express

  I'm used to be able to send pictures via outlook express, but recently have been do this error: your server unexpectedly terminated the connection. The possible causes for this include server, network problems, or a long period of inactivity issues. Account: pop.att.yahoo.com, server: outbound.att.net, Protocol: SMTP, Port: 465, secure (SSL): Yes, error number: ox800CCCOF. Is someone can you please help me to send my photos via outlook express again? Thank you

  Hello

  What version of the Windows operating system do you use?

  Perform the steps in the following links, and check, if that helps:

  Error messages when you send and receive in Outlook and Outlook Express

  http://support.Microsoft.com/kb/813514

  See also: error message: your server has unexpectedly terminated connection

  http://support.Microsoft.com/kb/278637

  I hope this helps.

• Problem with the output of HTML5 video

  Hi, I have this course that I build. I need to insert several videos. 1 per slide. I managed to insert the .mp4 videos and when I export out of HTML5, the first video works fine. While all the other videos does not work. I just hear the sound but can't see the video. Also, if I go back to the first video that was working, it does not yet appear, but I can hear the audio.

  As soon as you have more than 1 video in the project, the first works well the first time that you see, and then if you go back, you hear only the audio, not the images. All other videos in the project does not appear, but you can still hear the audio.

  I use the latest version of Captivate 6, exit to HTML5.

  Thank you!

  Hello

  Welcome to the Adobe Forums.

  Can you please insert the video as the "video event" and then try to publish the HTML 5 output and display the output.

  Also can you please try with any other example of .mp4 file and then view the output as HTML5.

  Thank you

  Loveesh

• Product number: G0T59AV: problem with updating software via the hp support assistant

  Hi guys

  When I check for updates via HSA he says there is no update, but I know there are a lot of pilots I have shoud update. I uninstalled HSA completely one re-installed but not feel. Is there anyway to fix it.

  Best regards

  Hello

  It can be updated for you in the backgroung already. If you wish, you can manually check the Device Manager to see the version. New dates don't mean new versions.

  Kind regards.

• Problems with a printer via wireles router two laptops, test message says not UPnP supported 0 x 80070035.

  Have checked all resorcess so far, error message microsoft search bar after kodak printer has 0 x 80070035

  Hello

  • What is the full error message that you receive?
  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Alternatively, you can try to uninstall the Kodak drivers and reinstall it and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows