T430s, boots or more enter BIOS

Similar Questions

• Cannot enter BIOS or boot from CD - Satellite 5100

  Hello

  one of my friends has ruined his Toshiba Satellite 5100.
  He has erased all the partition on the disk hard while the laptop always using the default setting.
  so, I could not boot from the cd or enter the BIOS.
  Is there any solution for this?

  Thank you

  Hello

  You can use different ways to boot from the CD drive.
  You can press the C key immediately after restarting the laptop.
  In this case, the laptop should boot from the CD. (Don t forget to insert the CD)

  Another way is to change the boot order in the BIOS. To enter the BIOS, please use the ESC key.

• After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter the BIOS setup

  After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter into the BIOS setup (via the ESC key).  I installed the BIOS twice and the computer always ignores the ESC key and launches Windows 7.  Any ideas?

  Well you're response made me experiment more and I discovered that the ESC key works if I type repeatedly instead pressed constantly.  Thank you for taking the time to answer!

• setting up a dual boot and storage of BIOS options

  I have a HP with Windows 7 Professional 64 bit xw4600 workstation. He resides in the SATA location 0.
  I have a separate hard drive Linux Mint 17.1 installed. He resides in slot SATA 3.
  I want to set up a dual-boot option to start Windows or Linux.
  In the BIOS under storage... Storage options must be set to RAID or AHCI? (I don't want a backup RAID configuration. I have cloned my hard drive to another hard drive in the SATA 2 connector, the DVD burner is in the SATA 1 connector).

  It seems that the computer will boot only from the hard drive to the SATA location 0.
  If I disconnect the hard drive to the SATAS location 0 which has Windows 7, I get an error in the message of wiring.
  If I use the boot F9 option, my choice is the hard drive, but I can't specify which.
  I can't find anywhere to change the HDD boot order in the BIOS.
  Any help will be apprecaited because I want to avoid opening the case and cables around switching.

  The HP xw workstations want to start only on the capture of port 0 on the motherboard SATA (often a blue color, while the others are brown dark/black).  Here is a post on how we worked around the need to have more of a boot drive, down to the low point, the photo shows the receiver in place with a carrier on the inside, and 3 many carriers are here to see you, too.

  This way you can have a single SATA cable go from that device to the SATA port 0 and boot from any operating system you like.  We now use only SSD for our startup discs, and the device fits perfectly into the floppy to the front of the box Bay area.  Do not stop going from one to the other SSDS.  I timed the move... 66 seconds to choose stop to W8.1 to get the Welcome screen W7 and vice versa on workstation xw4600 both xw6400/6600 (with BIOS optimized for faster startup).

  Apparently, there's some expensive SATA switches that allow to move from one entry to another entry and have only 1 output to the SATA port 0, but this approach has been working great for about 2 years now for us.  New versions of this device accept SATA cable lock, but my cables without locking of Foxconn HP were now firmly as well.

  There are similar devices for disks 3.5 "that HP had sold in the past.  Another advantage is that you can have two boot disks, both running on W7Pro, for example, and use the same certificate of authenticity.  One for the House stuff; one for the stuff of the company, for you home office people who want to keep things separate.

• Pavilion 11-n008tu: How can I enter Bios on Pavilion 11-n008tu?

  How can I enter Bios tried to type f9, f10, and esc on reboot, but always just goes to the login screen without visibly through the startup script. I want to start a cleaning hard drive so can send mobile recyclers

  Hello

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K

• Impossible to enter BIOS, PC HP Mini 210-1070NR range

  How to change the boot priority in the range of PC HP Mini 210-1070NR.

  Impossible to enter the BIOS utility. Tried F10 and all the function keys (1-9).

  FN + all work too, the keys (1-10).

  I just need the key or the procedure to enter the BIOS utility.

  Thank you.

  Sandeepz, I think I have a solution; at the first start the computer, press the ESC key, then you are given the choice to change the boot order, go to the Bios Setup, etc.. Try entering BIOS through this method - I managed to get into this lane.

  Good luck - please let us know how you are progressing!

• Re: Satellite Pro A40 - cannot find the boot order in the BIOS

  Hi, we have a very old A40 Satellite Pro with a new hard drive.

  We are tryng to change the boot order in the BIOS to recognize the CD player ready for the windows disk. However, there seems to be no option to change the BIOS not boot order, and Yes, we tried the road from Toshiba which suggests press C during startup until and F12 to select the drive during boot, or what kind of work.

  Please can someone help?
  concerning
  Karl

  PS: The current message on the screen during startup is THAT BOOTMGR is missing

  Hi karl1966,

  Have you checked if the CD/DVD drive is recognized correctly in the BIOS?

  Maybe your drive is noisy and you should try another. I put t disc you used but try with Toshiba and Microsoft Windows disk recovery disk.

• "No boot device" after the BIOS doesn't load the Satellite L50 - B - 25 c

  A friend who bought this laptop came up to me, explaining that he does not have to install an operating system. Then I tried it myself. I dusted off my original windows 7 pro 32 bit cd he jumped into the tray to cd and tried to boot from the cd by using the boot menu and bios boot order. the operation failed and even through I have cd was recognized by the bios the laptop not returned "no bootable device - restart device" error. So I tried to boot from usb NSB each usb port. The same unsuccessful result that happened. I then tried a USB bootable win7 64 bit and also failed.

  Anyone have any ideas why the laptop is not booting? Could there be a part that is DOA? What is a bios problem? Council of State, I think to Flash the bios.

  This laptop is brand new and never had anything installed on it.

  Thanks for the help!

  HARD drive is recognized correctly in the BIOS?
  If you want to downgrade from the Win7 machine, you must change secure boot option in the BIOS.

  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm

  You already changed option UEFI?

  By the way: before installing own version checking OS, which version of Windows is supported for this machine.
  Visit the download page of Toshiba on http://www.toshiba.eu/innovation/dow...ivers_bios.jsp and which operating system versions are fully supported with all the necessary drivers, tools and utilities.

• X 250 boots still in the BIOS

  (Of course after update BIOS 1.23) my Thinkpad X 250 (Windows 10 Pro 1607) boots still in the BIOS. I am able to start the X 250 via F12, but this isn't the long-term solution.

  I already tried without success:

  • Windows 10 Startup Repair
  • Bootrec /fixmbr
  • BIOS:
    Optimized by default
    Secure boot disabled
    UEFI and legacy
    First inherited
    Only legacy
    Disable "Run Prevention" (https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X240-cannot-boot-windows-7-64-bit-after-upgra...)

  You have any ideas? Thanks - Michael

  The keyboard was the troublemaker! Due to an unstable connection mainboard-keyboard F1-keytrokes were transferred at random. Thus, the laptop in these cases began with the BIOS.

  I have to ask the support of Lenovo for a stable connection (the little black part fixation was broken)

  Thank you all - Michael

• Not possible to change the boot order in the BIOS on Satellite satellite A10-403D

  I want to be able to boot from CD or USB STICK at first upward, but in the BIOS, it is not possible to change the boot sequence...

  Thank you for helping me! :)

  Hello Susan

  It will be interesting to know what model of laptop you have. By the description of the problem, it is always useful to know the exact model of laptop.

  When you turn off your laptop, press F12 and let us know exactly what is happening. By the way: can you explain what happen when you try to change the boot order in the BIOS settings?

• How can I enter BIOS compaq610 screen and set the date, time

  How can I enter BIOS compaq610 screen and set the date, time

  Hello

  See Page 94 or Page 100 (according to what's relevant) of your & Maintenance Guide.

  Kind regards

  DP - K

• ThinkPad T430 cannot change order of Bios Boot

  last day, I just bought new thinkpad T430 machine, when I try to change the boot order priority by default in the BIOS, the menu is disable, I can't change anything. Is - this thinkpad T430 came with default supervisor password? Did anyone here knows the default value of the supervisor password?

  FYI, when I try to enter the BIos, it asks for the password, and I just press ENTER to access the bios.

  Thank you

  Hey Ferrym and welcome to the forums.

  If you check in the BIOS under boot, what does say beside the command lock Boot? If it is enabled, you can change this for are disabled? Thanks Ferrym.

• ThinkPad E330 cannot enter BIOS/UEFI more

  Hey guys, I got a very annoying problem with my E330.

  He came without OS, so I put 8 Win on the preinstalled HARD drive. Then, I went out for one SSD and put Win 7 on it.
  (all UEFI mode)

  Since then I can not enter in the BIOS/UEFI more press either Enter or F1.
  Pressing enter gives me still a beep, but then Windows continues to load normally instead of view several options, like he used to do.

  And yes I am aware that I need a cold start to Win 8 to enter the UEFI

  The only way to access UEFI at this time is through charms-bar restarting 8 Win in UEFI thing.

  I tried to reflash the BIOS that does not of course because this is the same version, tried to remove the CMOS battery, that gave me an opportunity to enter the UEFI with F1 when he complained the date/hour of time.

  Switching to Legacy only brings me to an infinite PXE - something loop of the error, but I still cannot get into the BIOS.

  I tried pressing all combinations of keys Fn + F and without the Fn. Nothing works.

  I don't want to return the laptop, but it is a deal breaker for me if I can't Win 7 running on this subject with UEFI accessible.

  OK, the problem was solved with the help of the someotherguy of the user from the forum. It has detailed instructions.

  Looks like that install Win 7 mode UEFI corrupts the BIOS.

• Cannot enter BIOS or Option of Boot to display on my desktop Acer Aspire M3450

  For the last few days I tried to access in the BIOS or The Boot Options screen by pressing the keys with " DEL " for BIOS and ' F12 ' to The Boot Options screen. Same pressing down both keys on my keyboard and switch to normal startup with Windows 10 logo screen and then type password. I'm sure you know that this office is not supported for parameters of the UEFI. I tried with Settings\Update and Security-Advanced Options- then have 6 names on the double column , but I'm not sure that one to take to solve the problem. Here are the 6 names below:

  System restore

  System Image recovery

  Startup Repair

  Command prompt

  Startup parameters

  Go back to the previous version

  Everything what I wan tis to solve two things by pressing the ekys for BIOS and the Boot Options screen. That's all that I need it. Or I need to reinstall the entire disk operating system Microsoft Windows 10 Home Premium 64?   Either way, my computer's desktop Acer Aspire M3450 game.

  Thank you

  John

  It's a good thing I do not get out the my desktop's CMOS battery. Someone I know told me I 'Try to change the keyboard' Guess - it works now. The USB keyboard that I just bought does not work so I went back to the wireless keyboard that I used all the time. So now my problem is solved.

  Can I ask a question - why doesn't the USB keyboard support to accept that I press the key after the reboot for BIOS or Boot Display Options? Hope that someone here in this forum will answer for that.

  Thank you

  John

• T430s: boot from an external USB DVD drive

  I wanted to change the boot sequence to boot from external DVD drive to install Win8. To access the BIOS I hit Enter (empty password I guess) but in the BIOS everything is grey: I can't make changes. What is going on?

  @kaja69...

  Rich said, you have a set supervisor password and Jin Li said, there is no default password.

  For more information on the different passwords at the BIOS level, please consult your T430s Hardware Maintenance Manual (manuals pages 36-38).

  By Community rules, discussion of passwords is a sensitive area and can risk one slows down, so please keep that in mind if/as this discussion progresses.

  Kind regards.